* Problem using PCMCIA card on 2.6.0-test5
@ 2003-10-01 18:20 Anoop Rajendra
2003-10-01 19:02 ` Russell King
0 siblings, 1 reply; 2+ messages in thread
From: Anoop Rajendra @ 2003-10-01 18:20 UTC (permalink / raw)
To: linux-kernel
Hi,
I have problems using the wireless card on my laptop.
It uses the acx100sta chipset :-(. But thats not the problem.
Every time I insert the card the kernel prints out a message
saying kernel unable to handle paging request. And if I try to
remove the card the system hangs. For the card I'm using the yenta_socket
module in the kernel.The i82365 module does not work. This isnt a driver
problem, because I havent even loaded the drivers.(i actually dont have
'em for this kernel)
Any ideas?
Thanks,
Anoop
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Problem using PCMCIA card on 2.6.0-test5
2003-10-01 18:20 Problem using PCMCIA card on 2.6.0-test5 Anoop Rajendra
@ 2003-10-01 19:02 ` Russell King
0 siblings, 0 replies; 2+ messages in thread
From: Russell King @ 2003-10-01 19:02 UTC (permalink / raw)
To: Anoop Rajendra; +Cc: linux-kernel
On Wed, Oct 01, 2003 at 01:20:45PM -0500, Anoop Rajendra wrote:
> Every time I insert the card the kernel prints out a message
> saying kernel unable to handle paging request.
No idea unless you post the whole message (including the complete oops
dump.)
--
Russell King (rmk@arm.linux.org.uk) http://www.arm.linux.org.uk/personal/
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/
2.6 Serial core
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-10-01 19:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-01 18:20 Problem using PCMCIA card on 2.6.0-test5 Anoop Rajendra
2003-10-01 19:02 ` Russell King
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox