From: Catalin Muresan <catalin.muresan@astral.ro>
To: linux-kernel@vger.kernel.org
Subject: SII680 problems (IDE)
Date: Wed, 8 Oct 2003 17:01:17 +0300 [thread overview]
Message-ID: <20031008140117.GA2392@astral.ro> (raw)
Hello,
i have an IDE controller with Silicon Image 0680A chipset (Class
0140: 1095:0680 Subsystem: 1771:1680) and have problems using any ide device
on it (tested with Seagate and Quantum disks). i can read from the disk fine
(hdparm -t shows about 40MB/sec at 100% sys load ?? but this is not the
issue, first to get it working) but as soon as i try to write a single
sector (partition table) i get:
hde: dma_timer_expiry: dma status == 0x20
hde: DMA timeout retry
hde: timeout waiting for DMA
hde: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hde: drive not ready for command
hde: status timeout: status=0xd0 { Busy }
hde: no DRQ after issuing MULTWRITE
ide2: reset: success
hde: hde1
hde: hde1
(last 2 lines are because of fdisk) and it disables DMA and
continues to work but very very slow (in PIO mode i think).
this is on linux-2.6.0-test6 and 2.4.22 (siimage.c ver. 1.06), this
is the boot message:
SiI680: IDE controller at PCI slot 0000:00:0d.0
SiI680: chipset revision 2
SiI680: BASE CLOCK == 133
SiI680: 100% native mode on irq 10
ide2: MMIO-DMA at 0xf0808000-0xf0808007, BIOS settings: hde:pio, hdf:pio
ide3: MMIO-DMA at 0xf0808008-0xf080800f, BIOS settings: hdg:pio, hdh:pio
hde: ST340016A, ATA DISK drive
ide2 at 0xf0808080-0xf0808087,0xf080808a on irq 10
hde: max request size: 64KiB
hde: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hde:
patches, questions, solutions are wellcome, please CC: to me as I am
not on linux-kernel.
thank you.
--
Catalin Muresan
reply other threads:[~2003-10-08 14:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031008140117.GA2392@astral.ro \
--to=catalin.muresan@astral.ro \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox