Floppy in 2.6

Floppy in 2.6

[Jakub Krajcovic]

Hi everybody, this might be a stupid question, but here goes anyway:

I've been using the 2.6 test kernels from when -test4 was released, but only today have i noticed that my floppy drive is nowhere to be found.

I've checked the in the menu for the kernel config (make menuconfig) and i did not find the  "block devices > normal floppy support" option (as it was called in the 2.4 kernels) anywhere, and there is no /dev/fd0 on my system.

In 2.4 there was the option for "normal floppy support" and I have the /dev/fd0 device for my floppy when I boot the old 2.4.22 kernel. So my question is: does the 2.6 kernel support normal floppy disks or not? And if it does, how do I enable this support in order to use my floppy drive.

thanx in advance

Re: Floppy in 2.6

[Randy.Dunlap]

On Tue, 28 Oct 2003 23:20:54 +0100 Jakub Krajcovic <news.receive@zoznam.sk> wrote:

| Hi everybody, this might be a stupid question, but here goes anyway:
| 
| I've been using the 2.6 test kernels from when -test4 was released, but only today have i noticed that my floppy drive is nowhere to be found.
| 
| I've checked the in the menu for the kernel config (make menuconfig) and i did not find the  "block devices > normal floppy support" option (as it was called in the 2.4 kernels) anywhere, and there is no /dev/fd0 on my system.

It's the first item listed under Block devices: Normal floppy disk support

It won't be listed for PC9800 or S/390 hardware.

| In 2.4 there was the option for "normal floppy support" and I have the /dev/fd0 device for my floppy when I boot the old 2.4.22 kernel. So my question is: does the 2.6 kernel support normal floppy disks or not? And if it does, how do I enable this support in order to use my floppy drive.

Yes.  What kind of system hardware?
Check for "CONFIG_BLK_DEV_FD" in the .config file.

--
~Randy

Re: Floppy in 2.6

[Måns Rullgård]

Jakub Krajcovic <news.receive@zoznam.sk> writes:

> In 2.4 there was the option for "normal floppy support" and I have the
> /dev/fd0 device for my floppy when I boot the old 2.4.22 kernel. So my
> question is: does the 2.6 kernel support normal floppy disks or not?
> And if it does, how do I enable this support in order to use my floppy
> drive.

It's there.  In menuconfig it's "Device Drivers" -> "Block devices" ->
"Normal floppy disk support".

Who uses floppy disks nowadays, anyway?

-- 
Måns Rullgård
mru@kth.se

Re: Floppy in 2.6

[M. Fioretti]

On Tue, Oct 28, 2003 23:42:12 at 11:42:12PM +0100, Måns Rullgård (mru@kth.se) wrote:
> 
> Who uses floppy disks nowadays, anyway?
> 

The many, many people who do need new kernel functionalities, but need
to control all their existing hardware and simply won't trash a
perfectly good PC just because it's the trendy thing to do, since:

they can find a ton of more meaningful uses of the same money (dance
classes, extra days of vacation, clothes, theater...)

they simply don't have that money

See the project in my signature, or the "Unbloating the kernel" thread
here for the big picture.

Ciao,
	Marco Fioretti

-- 
Marco Fioretti                 m.fioretti, at the server inwind.it
Red Hat for low memory         http://www.rule-project.org/en/

"Get real! This is a discussion group, not a helpdesk. You post
something, we discuss its implications. If the discussion happens to
answer a question you've asked, that's incidental."
				 -- nobull in comp.lang.perl.misc

Re: Floppy in 2.6

[bill davidsen]

In article <yw1xekwxx9vf.fsf@kth.se>,
=?iso-8859-1?q?M=E5ns_Rullg=E5rd?= <mru@kth.se> wrote:
| Jakub Krajcovic <news.receive@zoznam.sk> writes:
| 
| > In 2.4 there was the option for "normal floppy support" and I have the
| > /dev/fd0 device for my floppy when I boot the old 2.4.22 kernel. So my
| > question is: does the 2.6 kernel support normal floppy disks or not?
| > And if it does, how do I enable this support in order to use my floppy
| > drive.
| 
| It's there.  In menuconfig it's "Device Drivers" -> "Block devices" ->
| "Normal floppy disk support".
| 
| Who uses floppy disks nowadays, anyway?

People who are non-power users, people who support hardware devices
which use them and which cost too much to scrap and replace.

If I could find a good way to attach old 8 inch floppies to a PC using
reasonably available hardware I would, it would allow me to retire what
I use now. Since there's money in being able to do that, I do.
-- 
bill davidsen <davidsen@tmr.com>
  CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.

Re: Floppy in 2.6

[Konstantin Kletschke]

* Jakub Krajcovic <news.receive@zoznam.sk> [Tue, Oct 28, 2003 at 11:20:54PM +0100]:
> 
> I've been using the 2.6 test kernels from when  -test4  was  released,
> but only today have i noticed that my floppy drive is  nowhere  to  be
> found.

Enable ISA-Bus Support. Then, as the others point out, first item in
Block Devices.

Konsti

-- 
2.6.0-test6-mm4
Konstantin Kletschke <konsti@ludenkalle.de>, <konsti@ku-gbr.de>
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E  A080 1E69 3FDA EF62 FCEF
keulator.homelinux.org up 26 min, 

Re: Floppy in 2.6

[Randy.Dunlap]

On Wed, 29 Oct 2003 09:42:12 +0100 Konstantin Kletschke <konsti@ludenkalle.de> wrote:

| * Jakub Krajcovic <news.receive@zoznam.sk> [Tue, Oct 28, 2003 at 11:20:54PM +0100]:
| > 
| > I've been using the 2.6 test kernels from when  -test4  was  released,
| > but only today have i noticed that my floppy drive is  nowhere  to  be
| > found.
| 
| Enable ISA-Bus Support. Then, as the others point out, first item in
| Block Devices.

Seems like there was a time when CONFIG_ISA was required.
Ah yes, reverted on Oct. 9, 2003.
In 2.6.0-test9, BLK_DEV_FD does not depend on ISA at all.

--
~Randy