From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262887AbTJ3VL0 (ORCPT ); Thu, 30 Oct 2003 16:11:26 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262888AbTJ3VLZ (ORCPT ); Thu, 30 Oct 2003 16:11:25 -0500 Received: from [62.38.227.254] ([62.38.227.254]:8578 "EHLO pfn1.pefnos") by vger.kernel.org with ESMTP id S262887AbTJ3VLY (ORCPT ); Thu, 30 Oct 2003 16:11:24 -0500 From: "P. Christeas" (by way of P. Christeas ) Date: Fri, 31 Oct 2003 00:12:47 +0200 User-Agent: KMail/1.5.3 To: lkml Subject: 2.6.0-test9 breaks cdrecord w. ide-scsi device MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200310310012.47580.p_christ@hol.gr> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Just rebooted my long-running machine and now strongly suspect that it is a kernel bug: I try to burn (dummy mode) 20 tracks of audio on a 'PIONEER DVD-RW DVR-106D' drive. At -test8 it would work (tested 4 times now, several with even older kernels). On -test 9 I always (> 15 times tested) get the messages quoted. The drive is on ide-scsi [M], sg is built-in, sr is a module. Ask me anything else you may want me to try.. cdrecord 2.01.xx : Track 01: 31 of 38 MB written (fifo 100%) [buf 90%] 19.8x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 36 F3 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 D3 10 FA 0E 26 01 30 FE 08 01 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x01 (logical unit communication time-out) Fru 0x0 Sense flags: Blk 13832442 (not valid) cmd finished after 2.004s timeout 200s write track data: error after 33085584 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. Writing time: 28.974s Average write speed 154.5x. Min drive buffer fill was 79% Fixating... cdrecord 1.10: Track 04: 1 of 33 MB written (fifo 98%).cdrecord.old: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 BE 9D 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 D3 10 FA 0E 26 01 30 FE 08 01 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x01 (logical unit communication time-out) Fru 0x0 Sense flags: Blk 13832442 (not valid) cmd finished after 2.004s timeout 200s write track data: error after 1460592 bytes Sense Bytes: 70 00 00 00 00 00 00 0E 00 00 00 00 00 00 00 00 00 00 Writing time: 57.892s Fixating...