hda: no DRQ after issuing WRITE

steve
2003-11-05T03:07:30Z

Hey guys,

i keep getting things like this in my dmesg

============================================
hda: status timeout: status=0xd0 { Busy }

hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }

hda: no DRQ after issuing WRITE
ide0: reset: success
=============================================

>From hdparm
============================================
/dev/hda:

Model=IC35L080AVVA07-0, FwRev=VA4OA52A, SerialNo=VNC402A4CBRJLA
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160836480
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 2 3 4 5
=================================================

Ive searched high and low to try find out what this means, all ive found
it people keep saying its all different kinds of things..

I was wondering if this means my hdd is drying or is ti a setting?

Thanks guys,
Steve