From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261598AbTKLUvy (ORCPT ); Wed, 12 Nov 2003 15:51:54 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261614AbTKLUvx (ORCPT ); Wed, 12 Nov 2003 15:51:53 -0500 Received: from smtp.uol.com.br ([200.221.11.52]:52064 "EHLO smtp.uol.com.br") by vger.kernel.org with ESMTP id S261598AbTKLUuS (ORCPT ); Wed, 12 Nov 2003 15:50:18 -0500 Date: Wed, 12 Nov 2003 18:46:09 -0200 From: =?iso-8859-1?Q?Rog=E9rio?= Brito To: linux-usb-devel@lists.sourceforge.net Cc: linux-usb-users@lists.sourceforge.net, linux-kernel@vger.kernel.org Subject: [BUG] Still having problems with an USB Drive Message-ID: <20031112204609.GA1009@ime.usp.br> References: <20031105175609.GA967@ime.usp.br> <20031106022528.GA3636@ime.usp.br> <20031106224920.GA2638@ime.usp.br> <20031107195826.GA1343@ime.usp.br> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="SUOF0GtieIMvvwua" Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20031107195826.GA1343@ime.usp.br> User-Agent: Mutt/1.5.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --SUOF0GtieIMvvwua Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit Dear developers and other users, One week ago, I reported problems with my USB Drive (a Leading Driver UD-11), when trying to use it with Linux. The problems still persist after many different kernel releases, using both kernels from the 2.4 and the 2.6 series. Unfortunately, it seems that my messages were ignored after some point, but if it is for lack of information, then I would like to know which information is needed (I even provided a decoded Oops, but if that is not sufficient, please let me know). The problems that I have is that, despite all my efforts, the drive is only part of the time recognized as a valid block device. About 80% of the time, it simply is not recognized as a block device and I see many error messages generated by the kernel (see attached dmesg). I can use my drive without any problems under both MacOS X and under Windows and sometimes under Linux, which leads me to think that it is not a problem with the drive itself but only with the kernel. Using a 2.6.0-test9 kernel, when my drive is not recognized, I remove the drive and then plug it again, I see khub enter the "D" state. From there on, if I try to disable the hotplug subsystem (via /etc/init.d/hotplug stop), hotplug also becomes ininterruptible. If you want to see my earlier messages about the problem, please see: http://www.ussg.iu.edu/hypermail/linux/kernel/0311.0/0650.html http://www.ussg.iu.edu/hypermail/linux/kernel/0311.0/0652.html http://www.ussg.iu.edu/hypermail/linux/kernel/0311.0/0850.html http://www.ussg.iu.edu/hypermail/linux/kernel/0311.0/0998.html I put here attached both a dmesg after a fresh boot (and the device ignored) and a dmesg of the system after I remove and reinsert the USB Drive. Please, help. Thanks in advance, Rogério Brito. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Rogério Brito - rbrito@ime.usp.br - http://www.ime.usp.br/~rbrito =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= --SUOF0GtieIMvvwua Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: attachment; filename="dmesg-usb-fail.txt" Linux version 2.6.0-test9-1 (root@dumont) (gcc version 3.3.2 (Debian)) #1 Wed Nov 5 14:50:36 BRST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007fec000 (usable) BIOS-e820: 0000000007fec000 - 0000000007fef000 (ACPI data) BIOS-e820: 0000000007fef000 - 0000000007fff000 (reserved) BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB LOWMEM available. On node 0 totalpages: 32748 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 28652 pages, LIFO batch:6 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=Linux root=303 hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 PID hash table entries: 512 (order 9: 4096 bytes) Detected 605.648 MHz processor. Console: colour VGA+ 80x25 Memory: 127124k/130992k available (1312k kernel code, 3324k reserved, 428k data, 104k init, 0k highmem) Calibrating delay loop... 1191.93 BogoMIPS Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) Processor stepping 00 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1010, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 81 & 1f -> 01 PCI: Using IRQ router VIA [1106/0686] at 0000:00:04.0 SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Twister-K/KT133x/KM133 chipset agpgart: Maximum main memory to use for agp memory: 94M agpgart: AGP aperture is 64M @ 0xe4000000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:04.1 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: QUANTUM FIREBALLlct15 30, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: ASUS DVD-ROM E608, ATAPI CD/DVD-ROM drive hdd: Hewlett-Packard CD-Writer Plus 9100, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 PDC20265: IDE controller at PCI slot 0000:00:11.0 PCI: Found IRQ 10 for device 0000:00:11.0 PDC20265: chipset revision 2 PDC20265: 100% native mode on irq 10 PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio, hdh:pio hda: max request size: 128KiB hda: 58633344 sectors (30020 MB) w/418KiB Cache, CHS=58168/16/63, UDMA(66) hda: hda1 hda2 hda3 mice: PS/2 mouse device common for all mice input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) NET: Registered protocol family 1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 104k freed Adding 248996k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda3, internal journal 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 9 for device 0000:00:0d.0 PCI: Sharing IRQ 9 with 0000:00:04.2 PCI: Sharing IRQ 9 with 0000:00:04.3 PCI: Sharing IRQ 9 with 0000:00:09.0 eth0: RealTek RTL8139 at 0xc883f000, 00:e0:7d:96:28:8f, IRQ 9 eth0: Identified 8139 chip type 'RTL-8139C' SCSI subsystem initialized scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: ASUS Model: DVD-ROM E608 Rev: l.40 Type: CD-ROM ANSI SCSI revision: 02 scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a Type: CD-ROM ANSI SCSI revision: 02 es1371: version v0.32 time 15:04:30 Nov 5 2003 PCI: Found IRQ 9 for device 0000:00:09.0 PCI: Sharing IRQ 9 with 0000:00:04.2 PCI: Sharing IRQ 9 with 0000:00:04.3 PCI: Sharing IRQ 9 with 0000:00:0d.0 es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02 es1371: found es1371 rev 2 at io 0xa400 irq 9 joystick 0x0 ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport_pc: Via 686A parallel port: io=0x378 lp0: using parport0 (polling). kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. quotaon: numerical sysctl 5 16 8 is obsolete. drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Found IRQ 9 for device 0000:00:04.2 PCI: Sharing IRQ 9 with 0000:00:04.3 PCI: Sharing IRQ 9 with 0000:00:09.0 PCI: Sharing IRQ 9 with 0000:00:0d.0 uhci_hcd 0000:00:04.2: UHCI Host Controller uhci_hcd 0000:00:04.2: irq 9, io base 0000d400 uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 drivers/usb/host/uhci-hcd.c: detected 2 ports uhci_hcd 0000:00:04.2: root hub device address 1 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.0-test9-1 uhci_hcd usb usb1: SerialNumber: 0000:00:04.2 drivers/usb/core/usb.c: usb_hotplug usb usb1: registering 1-0:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: ganged power switching hub 1-0:1.0: global over-current protection hub 1-0:1.0: Port indicators are not supported hub 1-0:1.0: power on to power good time: 2ms hub 1-0:1.0: hub controller current requirement: 0mA hub 1-0:1.0: local power source is good hub 1-0:1.0: no over-current condition exists hub 1-0:1.0: enabling power on all ports PCI: Found IRQ 9 for device 0000:00:04.3 PCI: Sharing IRQ 9 with 0000:00:04.2 PCI: Sharing IRQ 9 with 0000:00:09.0 PCI: Sharing IRQ 9 with 0000:00:0d.0 uhci_hcd 0000:00:04.3: UHCI Host Controller uhci_hcd 0000:00:04.3: irq 9, io base 0000d000 uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 drivers/usb/host/uhci-hcd.c: detected 2 ports uhci_hcd 0000:00:04.3: root hub device address 1 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.0-test9-1 uhci_hcd usb usb2: SerialNumber: 0000:00:04.3 drivers/usb/core/usb.c: usb_hotplug usb usb2: registering 2-0:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: ganged power switching hub 2-0:1.0: global over-current protection hub 2-0:1.0: Port indicators are not supported hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: hub controller current requirement: 0mA hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists hub 2-0:1.0: enabling power on all ports hub 1-0:1.0: port 1, status 300, change 3, 1.5 Mb/s hub 1-0:1.0: port 2, status 101, change 3, 12 Mb/s hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 hub 1-0:1.0: new USB device on port 2, assigned address 2 usb 1-2: new device strings: Mfr=1, Product=3, SerialNumber=0 drivers/usb/core/message.c: USB device number 2 default language ID 0x409 usb 1-2: Product: USB Embedded Hub usb 1-2: Manufacturer: Leading Driver Co.,LTD. drivers/usb/core/usb.c: usb_hotplug usb 1-2: registering 1-2:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 1-2:1.0: usb_probe_interface hub 1-2:1.0: usb_probe_interface - got id hub 1-2:1.0: USB hub found hub 1-2:1.0: 2 ports detected hub 1-2:1.0: compound device; port removable status: FF hub 1-2:1.0: individual port power switching hub 1-2:1.0: individual port over-current protection hub 1-2:1.0: Port indicators are not supported hub 1-2:1.0: power on to power good time: 100ms hub 1-2:1.0: hub controller current requirement: 100mA hub 1-2:1.0: local power source is lost (inactive) hub 1-2:1.0: no over-current condition exists hub 1-2:1.0: enabling power on all ports hub 1-2:1.0: transfer --> -75 hub 1-0:1.0: port 1 enable change, status 300 hub 2-0:1.0: port 1, status 101, change 3, 12 Mb/s hub 2-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 2-0:1.0: new USB device on port 1, assigned address 2 usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3 drivers/usb/core/message.c: USB device number 2 default language ID 0x409 usb 2-1: Product: DeskJet 840C usb 2-1: Manufacturer: Hewlett-Packard usb 2-1: SerialNumber: BR1391S0WNKV drivers/usb/core/usb.c: usb_hotplug usb 2-1: registering 2-1:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 2-0:1.0: port 2, status 101, change 3, 12 Mb/s hub 2-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 hub 2-0:1.0: new USB device on port 2, assigned address 3 usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 drivers/usb/core/message.c: USB device number 3 default language ID 0x409 usb 2-2: Product: Generic USB Hub usb 2-2: Manufacturer: ALCOR drivers/usb/core/usb.c: usb_hotplug usb 2-2: registering 2-2:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 2-2:1.0: usb_probe_interface hub 2-2:1.0: usb_probe_interface - got id hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected hub 2-2:1.0: standalone hub hub 2-2:1.0: ganged power switching hub 2-2:1.0: global over-current protection hub 2-2:1.0: Port indicators are not supported hub 2-2:1.0: power on to power good time: 44ms hub 2-2:1.0: hub controller current requirement: 100mA hub 2-2:1.0: local power source is good hub 2-2:1.0: no over-current condition exists hub 2-2:1.0: enabling power on all ports eth0: link up, 10Mbps, half-duplex, lpa 0x0000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A usblp 2-1:1.0: usb_probe_interface usblp 2-1:1.0: usb_probe_interface - got id drivers/usb/class/usblp.c: Disabling reads from problem bidirectional printer on usblp0 drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604 drivers/usb/core/file.c: looking for a minor, starting at 0 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usb 2-1: hcd_unlink_urb c71fc480 fail -22 usb 2-1: hcd_unlink_urb c71fc480 fail -22 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). --SUOF0GtieIMvvwua Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: attachment; filename="dmesg-usb-fail2.txt" Linux version 2.6.0-test9-1 (root@dumont) (gcc version 3.3.2 (Debian)) #1 Wed Nov 5 14:50:36 BRST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007fec000 (usable) BIOS-e820: 0000000007fec000 - 0000000007fef000 (ACPI data) BIOS-e820: 0000000007fef000 - 0000000007fff000 (reserved) BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB LOWMEM available. On node 0 totalpages: 32748 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 28652 pages, LIFO batch:6 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=Linux root=303 hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 PID hash table entries: 512 (order 9: 4096 bytes) Detected 605.648 MHz processor. Console: colour VGA+ 80x25 Memory: 127124k/130992k available (1312k kernel code, 3324k reserved, 428k data, 104k init, 0k highmem) Calibrating delay loop... 1191.93 BogoMIPS Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) Processor stepping 00 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1010, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 81 & 1f -> 01 PCI: Using IRQ router VIA [1106/0686] at 0000:00:04.0 SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Twister-K/KT133x/KM133 chipset agpgart: Maximum main memory to use for agp memory: 94M agpgart: AGP aperture is 64M @ 0xe4000000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:04.1 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: QUANTUM FIREBALLlct15 30, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: ASUS DVD-ROM E608, ATAPI CD/DVD-ROM drive hdd: Hewlett-Packard CD-Writer Plus 9100, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 PDC20265: IDE controller at PCI slot 0000:00:11.0 PCI: Found IRQ 10 for device 0000:00:11.0 PDC20265: chipset revision 2 PDC20265: 100% native mode on irq 10 PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio, hdh:pio hda: max request size: 128KiB hda: 58633344 sectors (30020 MB) w/418KiB Cache, CHS=58168/16/63, UDMA(66) hda: hda1 hda2 hda3 mice: PS/2 mouse device common for all mice input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) NET: Registered protocol family 1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 104k freed Adding 248996k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda3, internal journal 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 9 for device 0000:00:0d.0 PCI: Sharing IRQ 9 with 0000:00:04.2 PCI: Sharing IRQ 9 with 0000:00:04.3 PCI: Sharing IRQ 9 with 0000:00:09.0 eth0: RealTek RTL8139 at 0xc883f000, 00:e0:7d:96:28:8f, IRQ 9 eth0: Identified 8139 chip type 'RTL-8139C' SCSI subsystem initialized scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: ASUS Model: DVD-ROM E608 Rev: l.40 Type: CD-ROM ANSI SCSI revision: 02 scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0a Type: CD-ROM ANSI SCSI revision: 02 es1371: version v0.32 time 15:04:30 Nov 5 2003 PCI: Found IRQ 9 for device 0000:00:09.0 PCI: Sharing IRQ 9 with 0000:00:04.2 PCI: Sharing IRQ 9 with 0000:00:04.3 PCI: Sharing IRQ 9 with 0000:00:0d.0 es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02 es1371: found es1371 rev 2 at io 0xa400 irq 9 joystick 0x0 ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport_pc: Via 686A parallel port: io=0x378 lp0: using parport0 (polling). kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. quotaon: numerical sysctl 5 16 8 is obsolete. drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Found IRQ 9 for device 0000:00:04.2 PCI: Sharing IRQ 9 with 0000:00:04.3 PCI: Sharing IRQ 9 with 0000:00:09.0 PCI: Sharing IRQ 9 with 0000:00:0d.0 uhci_hcd 0000:00:04.2: UHCI Host Controller uhci_hcd 0000:00:04.2: irq 9, io base 0000d400 uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 drivers/usb/host/uhci-hcd.c: detected 2 ports uhci_hcd 0000:00:04.2: root hub device address 1 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.0-test9-1 uhci_hcd usb usb1: SerialNumber: 0000:00:04.2 drivers/usb/core/usb.c: usb_hotplug usb usb1: registering 1-0:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: ganged power switching hub 1-0:1.0: global over-current protection hub 1-0:1.0: Port indicators are not supported hub 1-0:1.0: power on to power good time: 2ms hub 1-0:1.0: hub controller current requirement: 0mA hub 1-0:1.0: local power source is good hub 1-0:1.0: no over-current condition exists hub 1-0:1.0: enabling power on all ports PCI: Found IRQ 9 for device 0000:00:04.3 PCI: Sharing IRQ 9 with 0000:00:04.2 PCI: Sharing IRQ 9 with 0000:00:09.0 PCI: Sharing IRQ 9 with 0000:00:0d.0 uhci_hcd 0000:00:04.3: UHCI Host Controller uhci_hcd 0000:00:04.3: irq 9, io base 0000d000 uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 drivers/usb/host/uhci-hcd.c: detected 2 ports uhci_hcd 0000:00:04.3: root hub device address 1 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.0-test9-1 uhci_hcd usb usb2: SerialNumber: 0000:00:04.3 drivers/usb/core/usb.c: usb_hotplug usb usb2: registering 2-0:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: ganged power switching hub 2-0:1.0: global over-current protection hub 2-0:1.0: Port indicators are not supported hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: hub controller current requirement: 0mA hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists hub 2-0:1.0: enabling power on all ports hub 1-0:1.0: port 1, status 300, change 3, 1.5 Mb/s hub 1-0:1.0: port 2, status 101, change 3, 12 Mb/s hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 hub 1-0:1.0: new USB device on port 2, assigned address 2 usb 1-2: new device strings: Mfr=1, Product=3, SerialNumber=0 drivers/usb/core/message.c: USB device number 2 default language ID 0x409 usb 1-2: Product: USB Embedded Hub usb 1-2: Manufacturer: Leading Driver Co.,LTD. drivers/usb/core/usb.c: usb_hotplug usb 1-2: registering 1-2:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 1-2:1.0: usb_probe_interface hub 1-2:1.0: usb_probe_interface - got id hub 1-2:1.0: USB hub found hub 1-2:1.0: 2 ports detected hub 1-2:1.0: compound device; port removable status: FF hub 1-2:1.0: individual port power switching hub 1-2:1.0: individual port over-current protection hub 1-2:1.0: Port indicators are not supported hub 1-2:1.0: power on to power good time: 100ms hub 1-2:1.0: hub controller current requirement: 100mA hub 1-2:1.0: local power source is lost (inactive) hub 1-2:1.0: no over-current condition exists hub 1-2:1.0: enabling power on all ports hub 1-2:1.0: transfer --> -75 hub 1-0:1.0: port 1 enable change, status 300 hub 2-0:1.0: port 1, status 101, change 3, 12 Mb/s hub 2-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 2-0:1.0: new USB device on port 1, assigned address 2 usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3 drivers/usb/core/message.c: USB device number 2 default language ID 0x409 usb 2-1: Product: DeskJet 840C usb 2-1: Manufacturer: Hewlett-Packard usb 2-1: SerialNumber: BR1391S0WNKV drivers/usb/core/usb.c: usb_hotplug usb 2-1: registering 2-1:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 2-0:1.0: port 2, status 101, change 3, 12 Mb/s hub 2-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 hub 2-0:1.0: new USB device on port 2, assigned address 3 usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 drivers/usb/core/message.c: USB device number 3 default language ID 0x409 usb 2-2: Product: Generic USB Hub usb 2-2: Manufacturer: ALCOR drivers/usb/core/usb.c: usb_hotplug usb 2-2: registering 2-2:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 2-2:1.0: usb_probe_interface hub 2-2:1.0: usb_probe_interface - got id hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected hub 2-2:1.0: standalone hub hub 2-2:1.0: ganged power switching hub 2-2:1.0: global over-current protection hub 2-2:1.0: Port indicators are not supported hub 2-2:1.0: power on to power good time: 44ms hub 2-2:1.0: hub controller current requirement: 100mA hub 2-2:1.0: local power source is good hub 2-2:1.0: no over-current condition exists hub 2-2:1.0: enabling power on all ports eth0: link up, 10Mbps, half-duplex, lpa 0x0000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A usblp 2-1:1.0: usb_probe_interface usblp 2-1:1.0: usb_probe_interface - got id drivers/usb/class/usblp.c: Disabling reads from problem bidirectional printer on usblp0 drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604 drivers/usb/core/file.c: looking for a minor, starting at 0 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usb 2-1: hcd_unlink_urb c71fc480 fail -22 usb 2-1: hcd_unlink_urb c71fc480 fail -22 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). hub 1-0:1.0: port 2, status 100, change 3, 12 Mb/s usb 1-2: USB disconnect, address 2 usb 1-2: usb_disable_device nuking all URBs uhci_hcd 0000:00:04.2: shutdown urb c780ea80 pipe 40408280 ep1in-intr usb 1-2: unregistering interface 1-2:1.0 usb 1-2: hcd_unlink_urb c780ea80 fail -16 drivers/usb/core/usb.c: usb_hotplug usb 1-2: unregistering device drivers/usb/core/usb.c: usb_hotplug hub 1-0:1.0: port 2 enable change, status 100 drivers/usb/host/uhci-hcd.c: d400: suspend_hc drivers/usb/host/uhci-hcd.c: d400: wakeup_hc hub 1-0:1.0: port 2, status 101, change 3, 12 Mb/s hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 hub 1-0:1.0: new USB device on port 2, assigned address 3 usb 1-2: control timeout on ep0out --SUOF0GtieIMvvwua--