Re: Corrected drivermodel for i8042.c

[Karol Kozimor <sziwan@hell.org.pl>]

Thus wrote Pavel Machek:
> 
> Hi!
> 
> Here's (slightly) better patch. i8042_controller_init() can not be
> __init when it is called from _resume() function.

Hi,
Your patch makes my keyboard work again after S3. Yay!
The touchpad still doesn't work, but that's expected I suppose.
The odd thing is, both the keyboard and the touchpad work fine if the S3
cycle is followed by an swsusp/pmdisk one.
Attached is the dmesg for completeness sake.

-- 
Karol 'sziwan' Kozimor
sziwan@hell.org.pl

Linux version 2.6.0-test9-mm3 (sziwan@nadir) (gcc version 3.2.3) #14 Mon Nov 17 21:15:54 CET 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff9000 (usable)
 BIOS-e820: 000000000fff9000 - 000000000ffff000 (ACPI data)
 BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65529
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 61433 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ASUS L3C with broken BIOS detected. Refusing to enable the local APIC.
ACPI: RSDP (v000 ASUS                                      ) @ 0x000f6890
ACPI: RSDT (v001 ASUS   P4_L3CS  0x42302e31 MSFT 0x31313031) @ 0x0fff9000
ACPI: FADT (v001 ASUS   P4_L3CS  0x42302e31 MSFT 0x31313031) @ 0x0fff9080
ACPI: BOOT (v001 ASUS   P4_L3CS  0x42302e31 MSFT 0x31313031) @ 0x0fff9040
ACPI: DSDT (v001   ASUS P4_L3CS  0x00001000 MSFT 0x0100000d) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=2.6 ro root=305 resume=/dev/hda1 acpi_sleep=s3_bios noresume
current: c0325a60
current->thread_info: c038e000
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1700.566 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 255888k/262116k available (1912k kernel code, 5528k reserved, 701k data, 132k init, 0k highmem)
zapping low mappings.
Calibrating delay loop... 3350.52 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 3febf9ff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 3febf9ff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU:     After all inits, caps: 3febf9ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0e40, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
 tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
Parsing all Control Methods:..............................................................................................................................................................................................................................................................
Table [DSDT](id F004) - 761 Objects with 59 Devices 254 Methods 26 Regions
ACPI Namespace successfully loaded at root c03c617c
evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode successful
evgpeblk-0748 [06] ev_create_gpe_block   : GPE 00 to 15 [_GPE] 2 regs at 000000000000E428 on int 9
evgpeblk-0748 [06] ev_create_gpe_block   : GPE 16 to 31 [_GPE] 2 regs at 000000000000E42C on int 9
Completing Region/Field/Buffer/Package initialization:..................................................................................
Initialized 26/26 Regions 0/0 Fields 23/23 Buffers 33/33 Packages (769 nodes)
Executing all Device _STA and_INI methods:............................................................
60 Devices found containing: 60 _STA, 5 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs *5)
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: Embedded Controller [ECD0] (gpe 28)
ACPI: Power Resource [PRCF] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc3c0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc3f0, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
Machine check exception polling timer started.
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
SGI XFS for Linux with no debug enabled
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LIDD]
ACPI: Fan [CFAN] (on)
ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states)
ACPI: Thermal Zone [THRM] (52 C)
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.12
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8400-0x8407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x8408-0x840f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N040ATCS04-0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: TOSHIBA DVD-ROM SD-R2212, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 > p4
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
 Firmware: 4.6
 180 degree mounted touchpad
 Sensor: 18
 new absolute packet format
 Touchpad has extended capability bits
 -> four buttons
 -> multifinger detection
 -> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
Resume Machine: Resuming from device hda1
Resume Machine: This is normal swap space
disabled
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S1 S3 S4 S5)
XFS mounting filesystem hda5
Starting XFS recovery on filesystem: hda5 (dev: hda5)
Ending XFS recovery on filesystem: hda5 (dev: hda5)
VFS: Mounted root (xfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 132k freed
Adding 393552k swap on /dev/hda1.  Priority:-1 extents:1
XFS mounting filesystem hda6
Starting XFS recovery on filesystem: hda6 (dev: hda6)
Ending XFS recovery on filesystem: hda6 (dev: hda6)
Asus Laptop ACPI Extras version 0.26
  L3C model detected, supported
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
Yenta: CardBus bridge found at 0000:02:07.0 [1043:1624]
Yenta: ISA IRQ list 0498, PCI irq5
Socket status: 30000006
PCI: Enabling device 0000:02:07.1 (0000 -> 0002)
Yenta: CardBus bridge found at 0000:02:07.1 [1043:1624]
Yenta: ISA IRQ list 0498, PCI irq11
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x2f8-0x2ff 0x378-0x37f 0x3c0-0x3df 0x3f8-0x3ff 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xa800, 00:e0:18:dc:6d:bc, IRQ 9
eth0:  Identified 8139 chip type 'RTL-8100'
eth0: link down
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 5, io base 0000b800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 9, io base 0000b400
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 1-0:1.0: new USB device on port 2, assigned address 2
input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[d6000000-d60007ff]  Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180003075522]
PM: Preparing system for suspend
Stopping tasks: =========================|
hdc: start_power_step(step: 0)
hdc: completing PM request, suspend
hda: start_power_step(step: 0)
hda: start_power_step(step: 1)
hda: complete_power_step(step: 1, stat: 50, err: 0)
hda: completing PM request, suspend
PM: Entering state.
 hwsleep-0257 [30] acpi_enter_sleep_state: Entering sleep state [S3]
Back to C!
zapping low mappings.
input: AT Translated Set 2 keyboard on isa0060/serio0
PM: Finishing up.
PCI: Setting latency timer of device 0000:00:1d.0 to 64
PCI: Setting latency timer of device 0000:00:1d.1 to 64
eth0: link down
hda: Wakeup request inited, waiting for !BSY...
drivers/usb/host/uhci-hcd.c: b800: host system error, PCI problems?
drivers/usb/host/uhci-hcd.c: b800: host controller halted. very bad
hda: start_power_step(step: 1000)
blk: queue c1352800, I/O limit 4095Mb (mask 0xffffffff)
hda: completing PM request, resume
hdc: Wakeup request inited, waiting for !BSY...
hdc: start_power_step(step: 1000)
hdc: completing PM request, resume
drivers/usb/host/uhci-hcd.c: b400: host system error, PCI problems?
drivers/usb/host/uhci-hcd.c: b400: host controller halted. very bad
drivers/usb/host/uhci-hcd.c: b400: host controller halted. very bad
Restarting tasks... done