public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Stephan von Krawczynski <skraw@ithnet.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Problem Report 2.4.23 ACPI and ASUS TRL-DLS
Date: Sat, 29 Nov 2003 18:10:35 +0100	[thread overview]
Message-ID: <20031129181035.70262a07.skraw@ithnet.com> (raw)

Hello,

I just found out that enabling ACPI (kernel 2.4.23) on an ASUS TRL-DLS board
leads to a failing boot, caused by not configuring the onboard scsi aic
interfaces. In fact they are simply gone from the pci list (no kidding).
Disabling ACPI leads to a perfectly working box with:

00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23)
        Flags: fast devsel

00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
        Flags: bus master, medium devsel, latency 32

00:00.2 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
        Flags: medium devsel

00:00.3 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
        Flags: medium devsel

00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
        Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter
        Flags: bus master, medium devsel, latency 32, IRQ 18
        Memory at ef000000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at d800 [size=64]
        Memory at ee800000 (32-bit, non-prefetchable) [size=128K]
        Expansion ROM at febf0000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2

00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
        Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter
        Flags: bus master, medium devsel, latency 32, IRQ 18
        Memory at ee000000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at d400 [size=64]
        Memory at ed800000 (32-bit, non-prefetchable) [size=128K]
        Expansion ROM at febe0000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2

00:04.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] (prog-if 00 [VGA])
        Subsystem: C.P. Technology Co. Ltd RV200 QW [Radeon 7500 PCI Dual Display]
        Flags: bus master, stepping, medium devsel, latency 32, IRQ 25
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        I/O ports at d000 [size=256]
        Memory at ed000000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at effe0000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2

00:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
        Subsystem: Creative Labs SBLive! Player 5.1
        Flags: bus master, medium devsel, latency 32, IRQ 26
        I/O ports at b800 [size=32]
        Capabilities: [dc] Power Management version 1

00:05.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
        Subsystem: Creative Labs Gameport Joystick
        Flags: bus master, medium devsel, latency 32
        I/O ports at b400 [size=8]
        Capabilities: [dc] Power Management version 1

00:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
        Subsystem: Asustek Computer, Inc.: Unknown device 1234
        Flags: bus master, stepping, medium devsel, latency 32, IRQ 19
        Memory at ec000000 (32-bit, non-prefetchable) [disabled] [size=16M]
        I/O ports at b000 [disabled] [size=256]
        Memory at eb800000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Expansion ROM at effc0000 [disabled] [size=128K]
        Capabilities: [5c] Power Management version 2

00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
        Subsystem: ServerWorks CSB5 South Bridge
        Flags: bus master, medium devsel, latency 32

00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 8a [Master SecP PriP])
        Subsystem: ServerWorks CSB5 IDE Controller
        Flags: bus master, medium devsel, latency 64
        I/O ports at <ignored>
        I/O ports at <ignored>
        I/O ports at <ignored>
        I/O ports at <ignored>
        I/O ports at 9400 [size=16]

00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05) (prog-if 10 [OHCI])
        Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at eb000000 (32-bit, non-prefetchable) [size=4K]

00:0f.3 Host bridge: ServerWorks GCLE Host Bridge
        Subsystem: ServerWorks: Unknown device 0230
        Flags: bus master, medium devsel, latency 0

01:02.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)
        Subsystem: 3ware Inc 3ware 7000-series ATA-RAID
        Flags: bus master, medium devsel, latency 32, IRQ 17
        I/O ports at 9000 [size=16]
        Memory at ea800000 (32-bit, non-prefetchable) [size=16]
        Memory at ea000000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [40] Power Management version 1

01:03.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN (rev 01)
        Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN
        Flags: medium devsel, IRQ 20
        Memory at e9800000 (32-bit, non-prefetchable) [size=32]
        I/O ports at 8800 [size=32]
        Capabilities: [40] Power Management version 2

01:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
        Subsystem: 3Com Corporation 3C996B-T 1000Base-T
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 21
        Memory at e9000000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [40] PCI-X non-bridge device.
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Vital Product Data
        Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-

02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
        Subsystem: 3Com Corporation 3C996B-T 1000Base-T
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 24
        Memory at e8800000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [40] PCI-X non-bridge device.
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Vital Product Data
        Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-

02:03.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
        Subsystem: Adaptec AIC-7899P U160/m
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 22
        BIST result: 00
        I/O ports at 8400 [disabled] [size=256]
        Memory at e8000000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at efde0000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2

02:03.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
        Subsystem: Adaptec AIC-7899P U160/m
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 23
        BIST result: 00
        I/O ports at 8000 [disabled] [size=256]
        Memory at e7800000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at efdc0000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2



If someone wants to give it a try, just send me ideas or patches.

Thanks,
Stephan

             reply	other threads:[~2003-11-29 17:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-11-29 17:10 Stephan von Krawczynski [this message]
     [not found] <BF1FE1855350A0479097B3A0D2A80EE00184CE53@hdsmsx402.hd.intel.com>
2003-11-30  8:45 ` Problem Report 2.4.23 ACPI and ASUS TRL-DLS Len Brown
2003-12-01 16:10   ` Stephan von Krawczynski
  -- strict thread matches above, loose matches on Subject: below --
2003-12-01 16:33 Brown, Len

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20031129181035.70262a07.skraw@ithnet.com \
    --to=skraw@ithnet.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox