From: Erik Mouw <erik@harddisk-recovery.com>
To: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Subject: [BUG 2.6.0-test11] debug messages, ALSA or USB related
Date: Tue, 2 Dec 2003 00:39:41 +0100 [thread overview]
Message-ID: <20031201233941.GA4017@bitwizard.nl> (raw)
Hi,
While playing sound on a USB audio device I got the following debug
messages:
Debug: sleeping function called from invalid context at kernel/sched.c:1751
in_atomic():1, irqs_disabled():1
Call Trace:
[<c011dedb>] __might_sleep+0xab/0xd0
[<c011cd6f>] wait_for_completion+0x1f/0xe0
[<c01ec5fa>] get_device+0x1a/0x30
[<e0b4b1a9>] hcd_unlink_urb+0x169/0x260 [usbcore]
[<e0c04730>] snd_complete_urb+0x0/0xc0 [snd_usb_audio]
[<e0b4af27>] hcd_submit_urb+0x107/0x180 [usbcore]
[<e0b4ba42>] usb_unlink_urb+0x32/0x70 [usbcore]
[<e0c04960>] deactivate_urbs+0xb0/0xc0 [snd_usb_audio]
[<e0c04bd4>] snd_usb_pcm_trigger+0x54/0x60 [snd_usb_audio]
[<e0bce0a7>] snd_pcm_do_stop+0x27/0x30 [snd_pcm]
[<e0bcdde4>] snd_pcm_action_single+0x34/0x60 [snd_pcm]
[<e0bcde77>] snd_pcm_action+0x67/0x70 [snd_pcm]
[<e0bce150>] snd_pcm_stop+0x20/0x30 [snd_pcm]
[<e0bd2cb4>] snd_pcm_update_hw_ptr+0x134/0x1d0 [snd_pcm]
[<e0bd67c5>] snd_pcm_lib_write1+0x4c5/0x4e0 [snd_pcm]
[<c015fa14>] pipe_wait+0x94/0xb0
[<c011e2c0>] autoremove_wake_function+0x0/0x50
[<c016d1a1>] update_atime+0xc1/0xd0
[<e0bd686e>] snd_pcm_lib_write+0x8e/0xb0 [snd_pcm]
[<e0bd6220>] snd_pcm_lib_write_transfer+0x0/0xe0 [snd_pcm]
[<e0bd15bc>] snd_pcm_playback_ioctl1+0x40c/0x4a0 [snd_pcm]
[<c01538c9>] vfs_read+0xb9/0x120
[<c0165604>] sys_ioctl+0xf4/0x2b0
[<c010a36f>] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[<c011ca8c>] schedule+0x55c/0x570
[<c010acdc>] common_interrupt+0x18/0x20
[<c011cdd8>] wait_for_completion+0x88/0xe0
[<c011caf0>] default_wake_function+0x0/0x20
[<c011caf0>] default_wake_function+0x0/0x20
[<e0b4b1a9>] hcd_unlink_urb+0x169/0x260 [usbcore]
[<e0c04730>] snd_complete_urb+0x0/0xc0 [snd_usb_audio]
[<e0b4af27>] hcd_submit_urb+0x107/0x180 [usbcore]
[<e0b4ba42>] usb_unlink_urb+0x32/0x70 [usbcore]
[<e0c04960>] deactivate_urbs+0xb0/0xc0 [snd_usb_audio]
[<e0c04bd4>] snd_usb_pcm_trigger+0x54/0x60 [snd_usb_audio]
[<e0bce0a7>] snd_pcm_do_stop+0x27/0x30 [snd_pcm]
[<e0bcdde4>] snd_pcm_action_single+0x34/0x60 [snd_pcm]
[<e0bcde77>] snd_pcm_action+0x67/0x70 [snd_pcm]
[<e0bce150>] snd_pcm_stop+0x20/0x30 [snd_pcm]
[<e0bd2cb4>] snd_pcm_update_hw_ptr+0x134/0x1d0 [snd_pcm]
[<e0bd67c5>] snd_pcm_lib_write1+0x4c5/0x4e0 [snd_pcm]
[<c015fa14>] pipe_wait+0x94/0xb0
[<c011e2c0>] autoremove_wake_function+0x0/0x50
[<c016d1a1>] update_atime+0xc1/0xd0
[<e0bd686e>] snd_pcm_lib_write+0x8e/0xb0 [snd_pcm]
[<e0bd6220>] snd_pcm_lib_write_transfer+0x0/0xe0 [snd_pcm]
[<e0bd15bc>] snd_pcm_playback_ioctl1+0x40c/0x4a0 [snd_pcm]
[<c01538c9>] vfs_read+0xb9/0x120
[<c0165604>] sys_ioctl+0xf4/0x2b0
[<c010a36f>] syscall_call+0x7/0xb
The USB device is:
T: Bus=07 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0471 ProdID=0104 Rev= 1.00
S: Manufacturer=Philips Electronics
S: Product=Philips USB Digital Speaker System
C:* #Ifs= 3 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=04(O) Atr=09(Isoc) MxPS= 56 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=04(O) Atr=09(Isoc) MxPS= 112 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=04(O) Atr=09(Isoc) MxPS= 112 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=04(O) Atr=09(Isoc) MxPS= 224 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=04(O) Atr=09(Isoc) MxPS= 168 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=04(O) Atr=09(Isoc) MxPS= 336 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=10ms
At first glance it looks USB related, but it might as well be that the
ALSA code is the real culprit.
Erik
--
+-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
| Data lost? Stay calm and contact Harddisk-recovery.com
next reply other threads:[~2003-12-01 23:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-01 23:39 Erik Mouw [this message]
2003-12-02 14:17 ` [BUG 2.6.0-test11] debug messages, ALSA or USB related Takashi Iwai
2003-12-02 14:54 ` Erik Mouw
2003-12-02 15:04 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031201233941.GA4017@bitwizard.nl \
--to=erik@harddisk-recovery.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox