From: Matt Domsch <Matt_Domsch@dell.com>
To: Gonzalo Coello <gonzalocoello@hotmail.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Not able to load megaraid module after kernel upgrade from 2.4.9-e2 to 2.4.9-e25
Date: Thu, 18 Dec 2003 11:28:41 -0600 [thread overview]
Message-ID: <20031218112841.A4402@lists.us.dell.com> (raw)
In-Reply-To: <BAY2-F77LwSQcBqfrft00040881@hotmail.com>; from gonzalocoello@hotmail.com on Thu, Dec 18, 2003 at 04:54:41PM +0000
> Hello I am running dell Power Edge 12600, with Firmware 1.68,
> I have a Perc 4/Si RAID Controller BIOS version 1.04 FW 2.27 (the last
> version)
> When starting up, the bios can recognize the disk array with no problem, the
> server starts booting OK, but when it gets to load the megaraid module, it
> brakes:
The Linux-PowerEdge@dell.com list may be more appropriate for this
type of question. Subscribe at http://lists.us.dell.com/.
For the Red Hat kernel you mention, you want /etc/modules to list the
megaraid_2002 driver, not plain megaraid. Then remake your initial
ramdisk such that the megaraid_2002 driver gets picked up and used at
next boot.
Thanks,
Matt
--
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com
next prev parent reply other threads:[~2003-12-18 17:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-18 16:54 Not able to load megaraid module after kernel upgrade from 2.4.9-e2 to 2.4.9-e25 Gonzalo Coello
2003-12-18 17:28 ` Matt Domsch [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-12-18 17:08 Mukker, Atul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031218112841.A4402@lists.us.dell.com \
--to=matt_domsch@dell.com \
--cc=gonzalocoello@hotmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox