From: Patrick Cole <z@amused.net>
To: Markus Kossmann <markus.kossmann@inka.de>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.0: Disabling IRQ #9 - 2nd
Date: Fri, 9 Jan 2004 03:35:15 -0500 [thread overview]
Message-ID: <20040109083515.GA5599@fire.hoosac.com> (raw)
In-Reply-To: <200401090839.38733.markus.kossmann@inka.de>
I have a similar thing on our Tyan Opteron board. It seems to be
right after the initialisation of the AMD 8111 IDE controller:
AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA irq 9: nobody cared! Call Trace: [<c010c86b>] __report_bad_irq+0x2b/0x90 [<c0383eb5>] acpi_irq+0xf/0x1a [<c010c964>] note_interrupt+0x64/0xa0 [<c010cc95>] do_IRQ+0x165/0x1a0 [<c0105000>] _stext+0x0/0x70 [<c010af0c>] common_interrupt+0x18/0x20
[<c0108040>] default_idle+0x0/0x40
[<c0105000>] _stext+0x0/0x70
[<c010806f>] default_idle+0x2f/0x40
[<c01080fb>] cpu_idle+0x3b/0x50
[<c066e901>] start_kernel+0x1a1/0x1f0
[<c066e4a0>] unknown_bootoption+0x0/0x100
handlers:
[<c0383ea6>] (acpi_irq+0x0/0x1a)
Disabling IRQ #9
hdd: ATAPI-CD ROM-DRIVE-52MAX, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Fri, Jan 09, 2004 at 08:39:38AM +0100, Markus Kossmann wrote:
> When I run 2.60 on my PC with Tyan S2462 (AMD 762 MP) motherboard
> I allways get after some time the message "Disabling IRQ #9"
> and the following messages in the syslog :
> Jan 8 20:30:44 emil3 kernel: irq 9: nobody cared!
> Jan 8 20:30:44 emil3 kernel: Call Trace:
> Jan 8 20:30:44 emil3 kernel: [__report_bad_irq+42/144] __report_bad_irq
> +0x2a/0
> x90
> Jan 8 20:30:44 emil3 kernel: [<c010e8ca>] __report_bad_irq+0x2a/0x90
> Jan 8 20:30:44 emil3 kernel: [note_interrupt+149/192] note_interrupt
> +0x95/0xc0
> Jan 8 20:30:44 emil3 kernel: [<c010e9e5>] note_interrupt+0x95/0xc0
> Jan 8 20:30:44 emil3 kernel: [do_IRQ+278/320] do_IRQ+0x116/0x140
> Jan 8 20:30:44 emil3 kernel: [<c010ec96>] do_IRQ+0x116/0x140
> Jan 8 20:30:44 emil3 kernel: [common_interrupt+24/32] common_interrupt
> +0x18/0x
> 20
> Jan 8 20:30:44 emil3 kernel: [<c010ce1c>] common_interrupt+0x18/0x20
> Jan 8 20:30:44 emil3 kernel: [do_softirq+93/224] do_softirq+0x5d/0xe0
> Jan 8 20:30:44 emil3 kernel: [<c012c19d>] do_softirq+0x5d/0xe0
> Jan 8 20:30:44 emil3 kernel: [do_IRQ+285/320] do_IRQ+0x11d/0x140
> Jan 8 20:30:44 emil3 kernel: [<c010ec9d>] do_IRQ+0x11d/0x140
> Jan 8 20:30:44 emil3 kernel: [common_interrupt+24/32] common_interrupt
> +0x18/0x
> 20
> Jan 8 20:30:44 emil3 kernel: [<c010ce1c>] common_interrupt+0x18/0x20
> Jan 8 20:30:44 emil3 kernel: [default_idle+0/64] default_idle+0x0/0x40
> Jan 8 20:30:44 emil3 kernel: [<c010a030>] default_idle+0x0/0x40
> Jan 8 20:30:44 emil3 kernel: [default_idle+41/64] default_idle+0x29/0x40
> Jan 8 20:30:44 emil3 kernel: [<c010a059>] default_idle+0x29/0x40
> Jan 8 20:30:44 emil3 kernel: [cpu_idle+52/80] cpu_idle+0x34/0x50
> Jan 8 20:30:44 emil3 kernel: [<c010a0e4>] cpu_idle+0x34/0x50
> Jan 8 20:30:44 emil3 kernel: [printk+393/416] printk+0x189/0x1a0
> Jan 8 20:30:44 emil3 kernel: [<c01288a9>] printk+0x189/0x1a0
> Jan 8 20:30:44 emil3 kernel:
> Jan 8 20:30:44 emil3 kernel: handlers:
> Jan 8 20:30:44 emil3 kernel: [acpi_irq+0/22] (acpi_irq+0x0/0x16)
> Jan 8 20:30:44 emil3 kernel: [<c01fb426>] (acpi_irq+0x0/0x16)
> Jan 8 20:30:44 emil3 kernel: Disabling IRQ #9
>
>
> What can I do to fix that problem ?
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
prev parent reply other threads:[~2004-01-09 8:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-09 7:39 2.6.0: Disabling IRQ #9 Markus Kossmann
2004-01-09 8:35 ` Patrick Cole [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040109083515.GA5599@fire.hoosac.com \
--to=z@amused.net \
--cc=linux-kernel@vger.kernel.org \
--cc=markus.kossmann@inka.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox