* 2.6.1-mm1 and modular IDE.
@ 2004-01-09 22:50 Wojciech 'Sas' Cieciwa
2004-01-10 0:09 ` Stan Bubrouski
0 siblings, 1 reply; 3+ messages in thread
From: Wojciech 'Sas' Cieciwa @ 2004-01-09 22:50 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: TEXT/PLAIN, Size: 2430 bytes --]
OK. I try to build 2.6.1 with and without -mm1 patch.
Both with options listed below.
in attachment are output logs.
they are identical - that means that modular IDE in 2.6.1-mm1 is broken.
Sorry.
Sas.
P.S.
Or, ...
I'm so stupid, that I can't build kernel.
[...]
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_IDEDMA_PCI_WIP=y
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_IDE_CHIPSETS=y
#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=y
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_PDC4030=m
CONFIG_BLK_DEV_QD65XX=m
CONFIG_BLK_DEV_UMC8672=m
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
[...]
--
{Wojciech 'Sas' Cieciwa} {Member of PLD Team }
{e-mail: cieciwa@alpha.zarz.agh.edu.pl, http://www2.zarz.agh.edu.pl/~cieciwa}
[-- Attachment #2: Type: APPLICATION/x-bzip2, Size: 1466 bytes --]
[-- Attachment #3: Type: APPLICATION/x-bzip2, Size: 1460 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: 2.6.1-mm1 and modular IDE.
2004-01-09 22:50 2.6.1-mm1 and modular IDE Wojciech 'Sas' Cieciwa
@ 2004-01-10 0:09 ` Stan Bubrouski
2004-01-10 0:26 ` Arkadiusz Miskiewicz
0 siblings, 1 reply; 3+ messages in thread
From: Stan Bubrouski @ 2004-01-10 0:09 UTC (permalink / raw)
To: Wojciech 'Sas' Cieciwa; +Cc: linux-kernel
On Fri, 2004-01-09 at 17:50, Wojciech 'Sas' Cieciwa wrote:
> OK. I try to build 2.6.1 with and without -mm1 patch.
> Both with options listed below.
> in attachment are output logs.
> they are identical - that means that modular IDE in 2.6.1-mm1 is broken.
>
Correct me if I'm wrong, but wouldn't modular IDE be a bad idea anyways
if you don't have SCSI boot drive? Think about it, without IDE layer,
how's it going to mount the IDE drives to get the IDE module off of one
of them? You'd need it compiled in, right?
-sb
> Sorry.
> Sas.
> P.S.
> Or, ...
> I'm so stupid, that I can't build kernel.
>
> [...]
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=m
> CONFIG_BLK_DEV_IDE=m
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=m
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> CONFIG_BLK_DEV_IDECS=m
> CONFIG_BLK_DEV_IDECD=m
> CONFIG_BLK_DEV_IDETAPE=m
> CONFIG_BLK_DEV_IDEFLOPPY=m
> CONFIG_BLK_DEV_IDESCSI=m
> # CONFIG_IDE_TASK_IOCTL is not set
> CONFIG_IDE_TASKFILE_IO=y
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_BLK_DEV_CMD640=y
> CONFIG_BLK_DEV_CMD640_ENHANCED=y
> CONFIG_BLK_DEV_IDEPNP=y
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> CONFIG_BLK_DEV_OPTI621=m
> CONFIG_BLK_DEV_RZ1000=m
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> CONFIG_IDEDMA_PCI_WIP=y
> # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
> CONFIG_BLK_DEV_ADMA=y
> CONFIG_BLK_DEV_AEC62XX=m
> CONFIG_BLK_DEV_ALI15X3=m
> # CONFIG_WDC_ALI15X3 is not set
> CONFIG_BLK_DEV_AMD74XX=m
> CONFIG_BLK_DEV_CMD64X=m
> CONFIG_BLK_DEV_TRIFLEX=m
> CONFIG_BLK_DEV_CY82C693=m
> CONFIG_BLK_DEV_CS5520=m
> CONFIG_BLK_DEV_CS5530=m
> CONFIG_BLK_DEV_HPT34X=m
> # CONFIG_HPT34X_AUTODMA is not set
> CONFIG_BLK_DEV_HPT366=m
> CONFIG_BLK_DEV_SC1200=m
> CONFIG_BLK_DEV_PIIX=m
> CONFIG_BLK_DEV_NS87415=m
> CONFIG_BLK_DEV_PDC202XX_OLD=m
> CONFIG_BLK_DEV_PDC202XX_NEW=m
> CONFIG_BLK_DEV_SVWKS=m
> CONFIG_BLK_DEV_SIIMAGE=m
> CONFIG_BLK_DEV_SIS5513=m
> CONFIG_BLK_DEV_SLC90E66=m
> CONFIG_BLK_DEV_TRM290=m
> CONFIG_BLK_DEV_VIA82CXXX=m
> CONFIG_IDE_CHIPSETS=y
>
> #
> # Note: most of these also require special kernel boot parameters
> #
> CONFIG_BLK_DEV_4DRIVES=y
> CONFIG_BLK_DEV_ALI14XX=m
> CONFIG_BLK_DEV_DTC2278=m
> CONFIG_BLK_DEV_HT6560B=m
> CONFIG_BLK_DEV_PDC4030=m
> CONFIG_BLK_DEV_QD65XX=m
> CONFIG_BLK_DEV_UMC8672=m
> CONFIG_BLK_DEV_IDEDMA=y
> CONFIG_IDEDMA_IVB=y
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_DMA_NONPCI is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> CONFIG_SCSI=m
> CONFIG_SCSI_PROC_FS=y
>
> [...]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: 2.6.1-mm1 and modular IDE.
2004-01-10 0:09 ` Stan Bubrouski
@ 2004-01-10 0:26 ` Arkadiusz Miskiewicz
0 siblings, 0 replies; 3+ messages in thread
From: Arkadiusz Miskiewicz @ 2004-01-10 0:26 UTC (permalink / raw)
To: Stan Bubrouski; +Cc: linux-kernel
On Saturday 10 of January 2004 01:09, Stan Bubrouski wrote:
> On Fri, 2004-01-09 at 17:50, Wojciech 'Sas' Cieciwa wrote:
> > OK. I try to build 2.6.1 with and without -mm1 patch.
> > Both with options listed below.
> > in attachment are output logs.
> > they are identical - that means that modular IDE in 2.6.1-mm1 is broken.
>
> Correct me if I'm wrong, but wouldn't modular IDE be a bad idea anyways
> if you don't have SCSI boot drive? Think about it, without IDE layer,
> how's it going to mount the IDE drives to get the IDE module off of one
> of them? You'd need it compiled in, right?
Wrong. You can always use initrd and put IDE (or any else) modules there and
that's what we do with Wojtek in PLD.
--
Arkadiusz Miśkiewicz CS at FoE, Wroclaw University of Technology
arekm.pld-linux.org AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PLD/Linux
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-01-10 0:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-09 22:50 2.6.1-mm1 and modular IDE Wojciech 'Sas' Cieciwa
2004-01-10 0:09 ` Stan Bubrouski
2004-01-10 0:26 ` Arkadiusz Miskiewicz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox