* Highpoint 374 and drives recognized, but no drives/channels revealed
@ 2004-01-16 6:05 Brian McGroarty
0 siblings, 0 replies; only message in thread
From: Brian McGroarty @ 2004-01-16 6:05 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1794 bytes --]
With 2.6.0, the hpt366 module seems to recognize the 8 drives attached
to my dual hpt374 controller, however no drives are visible. I should
have ide2 through ide5.
Have others run into a similar problem?
$ cat /proc/ide/hpt366
HighPoint HPT366/368/370/372/374
Controller: 0
Chipset: HPT374
--------------- Primary Channel --------------- Secondary Channel --------------
Enabled: yes yes
Cable: ATA-66 ATA-66
--------------- drive0 --------- drive1 ------- drive0 ---------- drive1 -------
DMA capable: yes yes yes yes
Mode: UDMA UDMA UDMA UDMA
Controller: 1
Chipset: HPT374
--------------- Primary Channel --------------- Secondary Channel --------------
Enabled: yes yes
Cable: ATA-66 ATA-33
--------------- drive0 --------- drive1 ------- drive0 ---------- drive1 -------
DMA capable: yes yes yes yes
Mode: UDMA UDMA UDMA UDMA
$ ls -lA /proc/ide
-r--r--r-- 1 root root 0 Jan 15 23:33 drivers
lrwxrwxrwx 1 root root 8 Jan 15 23:33 hda -> ide0/hda
lrwxrwxrwx 1 root root 8 Jan 15 23:33 hdb -> ide0/hdb
lrwxrwxrwx 1 root root 8 Jan 15 23:33 hdc -> ide1/hdc
lrwxrwxrwx 1 root root 8 Jan 15 23:33 hdd -> ide1/hdd
-r--r--r-- 1 root root 0 Jan 15 23:33 hpt366
dr-xr-xr-x 4 root root 0 Jan 15 23:33 ide0
dr-xr-xr-x 4 root root 0 Jan 15 23:33 ide1
-r--r--r-- 1 root root 0 Jan 15 23:33 via
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-01-16 6:05 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-16 6:05 Highpoint 374 and drives recognized, but no drives/channels revealed Brian McGroarty
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox