From: Stephan von Krawczynski <skraw@ithnet.com>
To: Andreas Haumer <andreas@xss.co.at>
Cc: marcelo.tosatti@cyclades.com, andrew@walrond.org,
luming.yu@intel.com, linux-kernel@vger.kernel.org
Subject: Re: ACPI: problem on ASUS PR-DLS533
Date: Fri, 16 Jan 2004 14:22:51 +0100 [thread overview]
Message-ID: <20040116142251.693bc8bb.skraw@ithnet.com> (raw)
In-Reply-To: <4007E3C1.1020100@xss.co.at>
> For the system I noticed the ACPI problems (Asus PR-DLS533),
> the regression occured after 2.4.21
>
> With pristine 2.4.21 the system could boot with ACPI enabled,
> but with the new ACPI patches introduced with the 2.4.21-ac
> series (and integrated in the 2.4.x series later on) it did not.
>
> Does your board have several PCI busses (lspci -v) ?
You asked ;-)
The last two entries are the controllers in question.
00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23)
Flags: fast devsel
00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
Flags: bus master, medium devsel, latency 32
00:00.2 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
Flags: medium devsel
00:00.3 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
Flags: medium devsel
00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at ef000000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d800 [size=64]
Memory at ee800000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at febf0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at ee000000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d400 [size=64]
Memory at ed800000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
00:04.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd RV200 QW [Radeon 7500 PCI Dual Display]
Flags: bus master, stepping, medium devsel, latency 32, IRQ 25
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at d000 [size=256]
Memory at ed000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
00:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Subsystem: Creative Labs SBLive! Player 5.1
Flags: bus master, medium devsel, latency 32, IRQ 26
I/O ports at b800 [size=32]
Capabilities: [dc] Power Management version 1
00:05.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at b400 [size=8]
Capabilities: [dc] Power Management version 1
00:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 1234
Flags: bus master, stepping, medium devsel, latency 32, IRQ 19
Memory at ec000000 (32-bit, non-prefetchable) [disabled] [size=16M]
I/O ports at b000 [disabled] [size=256]
Memory at eb800000 (32-bit, non-prefetchable) [disabled] [size=4K]
Expansion ROM at effc0000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
Subsystem: ServerWorks CSB5 South Bridge
Flags: bus master, medium devsel, latency 32
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 8a [Master SecP PriP])
Subsystem: ServerWorks CSB5 IDE Controller
Flags: bus master, medium devsel, latency 64
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 9400 [size=16]
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05) (prog-if 10 [OHCI])
Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at eb000000 (32-bit, non-prefetchable) [size=4K]
00:0f.3 Host bridge: ServerWorks GCLE Host Bridge
Subsystem: ServerWorks: Unknown device 0230
Flags: bus master, medium devsel, latency 0
01:02.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)
Subsystem: 3ware Inc 3ware 7000-series ATA-RAID
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at 9000 [size=16]
Memory at ea800000 (32-bit, non-prefetchable) [size=16]
Memory at ea000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [40] Power Management version 1
01:03.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN (rev 01)
Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN
Flags: medium devsel, IRQ 20
Memory at e9800000 (32-bit, non-prefetchable) [size=32]
I/O ports at 8800 [size=32]
Capabilities: [40] Power Management version 2
01:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
Subsystem: 3Com Corporation 3C996B-T 1000Base-T
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 21
Memory at e9000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
Subsystem: 3Com Corporation 3C996B-T 1000Base-T
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 24
Memory at e8800000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
02:03.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
Subsystem: Adaptec AIC-7899P U160/m
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 22
BIST result: 00
I/O ports at 7800 [disabled] [size=256]
Memory at e8000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at efde0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
02:03.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
Subsystem: Adaptec AIC-7899P U160/m
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 23
BIST result: 00
I/O ports at 7400 [disabled] [size=256]
Memory at e7800000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at efdc0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
next prev parent reply other threads:[~2004-01-16 13:23 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-12 5:14 ACPI: problem on ASUS PR-DLS533 Yu, Luming
2004-01-15 18:14 ` Andrew Walrond
2004-01-16 10:30 ` Marcelo Tosatti
2004-01-16 11:25 ` Stephan von Krawczynski
2004-01-16 13:14 ` Andreas Haumer
2004-01-16 13:22 ` Stephan von Krawczynski [this message]
2004-01-16 12:07 ` Andrew Walrond
[not found] <BF1FE1855350A0479097B3A0D2A80EE0020ADE84@hdsmsx402.hd.intel.com>
2004-01-18 18:19 ` Len Brown
-- strict thread matches above, loose matches on Subject: below --
2004-01-18 4:23 Yu, Luming
2004-01-18 11:42 ` Andreas Haumer
2004-01-18 16:01 ` Andrew Walrond
2004-01-18 17:00 ` Stephan von Krawczynski
2004-01-18 4:18 Yu, Luming
2004-01-18 9:01 ` Andrew Walrond
2004-01-07 10:50 Yu, Luming
2004-01-07 12:35 ` Stephan von Krawczynski
2004-01-07 22:58 ` Marcelo Tosatti
2003-12-23 12:04 Andreas Haumer
2003-12-23 14:48 ` Andrew Walrond
2003-12-23 15:21 ` Andreas Haumer
2004-01-07 10:37 ` Stephan von Krawczynski
2004-01-07 14:30 ` Andrew Walrond
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040116142251.693bc8bb.skraw@ithnet.com \
--to=skraw@ithnet.com \
--cc=andreas@xss.co.at \
--cc=andrew@walrond.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luming.yu@intel.com \
--cc=marcelo.tosatti@cyclades.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox