* aacraid and 2.6
@ 2004-01-19 10:26 Miek Gieben
2004-01-19 13:52 ` Nathan Poznick
0 siblings, 1 reply; 6+ messages in thread
From: Miek Gieben @ 2004-01-19 10:26 UTC (permalink / raw)
To: linux-kernel
Hello,
Last week I tried to get aacraid working under 2.6.1, which failed. In
http://www.kernel.org/pub/linux/kernel/people/akpm/must-fix/must-fix-7.txt it
says:
o ideraid hasn't been ported to 2.5 at all yet.
We need to understand whether the proposed BIO split code will suffice
for this.
So that explains the non-working part in 2.6. In 2.4.24 is worked out of the
box, so I'm running that now.
My question: is there _any_ ETA on when this stuff is going to work in 2.6?
Could you please CC me on answers? I'm only reading the digest. Thanks,
grtz
Miek
--
GPG fingerprint: miek.nl/about.html
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: aacraid and 2.6
2004-01-19 10:26 aacraid and 2.6 Miek Gieben
@ 2004-01-19 13:52 ` Nathan Poznick
2004-01-19 13:56 ` Miek Gieben
0 siblings, 1 reply; 6+ messages in thread
From: Nathan Poznick @ 2004-01-19 13:52 UTC (permalink / raw)
To: linux-kernel; +Cc: Miek Gieben
[-- Attachment #1: Type: text/plain, Size: 559 bytes --]
Thus spake Miek Gieben:
> Hello,
>
> Last week I tried to get aacraid working under 2.6.1, which failed. In
> http://www.kernel.org/pub/linux/kernel/people/akpm/must-fix/must-fix-7.txt it
> says:
>
> o ideraid hasn't been ported to 2.5 at all yet.
However, aacraid is not ideraid. I'm using the aacraid driver on a Dell
PERC3 controller with no problems so far on 2.6.1-mm4.
--
Nathan Poznick <kraken@drunkmonkey.org>
Only two great groups of animals, men and ants, indulge in highly
organized mass warfare. - Charles H. Maskins
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: aacraid and 2.6
2004-01-19 13:52 ` Nathan Poznick
@ 2004-01-19 13:56 ` Miek Gieben
2004-01-19 18:05 ` Mike Fedyk
0 siblings, 1 reply; 6+ messages in thread
From: Miek Gieben @ 2004-01-19 13:56 UTC (permalink / raw)
To: linux-kernel; +Cc: Nathan Poznick
[On 19 Jan, @14:52, Nathan wrote in "Re: aacraid and 2.6 ..."]
> Thus spake Miek Gieben:
> > Hello,
> >
> > Last week I tried to get aacraid working under 2.6.1, which failed. In
> > http://www.kernel.org/pub/linux/kernel/people/akpm/must-fix/must-fix-7.txt it
> > says:
> >
> > o ideraid hasn't been ported to 2.5 at all yet.
>
> However, aacraid is not ideraid. I'm using the aacraid driver on a Dell
> PERC3 controller with no problems so far on 2.6.1-mm4.
hmmm, did you have any luck with 2.6.1?
In this case it's a SATA raid from Adaptec. So, if aacraid if not ide-raid, why
doesn't it work?
puzzled,
grtz Miek
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: aacraid and 2.6
2004-01-19 13:56 ` Miek Gieben
@ 2004-01-19 18:05 ` Mike Fedyk
2004-01-19 18:09 ` Miek Gieben
0 siblings, 1 reply; 6+ messages in thread
From: Mike Fedyk @ 2004-01-19 18:05 UTC (permalink / raw)
To: Miek Gieben; +Cc: linux-kernel, Nathan Poznick
On Mon, Jan 19, 2004 at 02:56:19PM +0100, Miek Gieben wrote:
> [On 19 Jan, @14:52, Nathan wrote in "Re: aacraid and 2.6 ..."]
> > Thus spake Miek Gieben:
> > > Hello,
> > >
> > > Last week I tried to get aacraid working under 2.6.1, which failed. In
> > > http://www.kernel.org/pub/linux/kernel/people/akpm/must-fix/must-fix-7.txt it
> > > says:
> > >
> > > o ideraid hasn't been ported to 2.5 at all yet.
> >
> > However, aacraid is not ideraid. I'm using the aacraid driver on a Dell
> > PERC3 controller with no problems so far on 2.6.1-mm4.
>
> hmmm, did you have any luck with 2.6.1?
>
> In this case it's a SATA raid from Adaptec. So, if aacraid if not ide-raid, why
> doesn't it work?
And what errors did you get?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: aacraid and 2.6
2004-01-19 18:05 ` Mike Fedyk
@ 2004-01-19 18:09 ` Miek Gieben
2004-01-20 0:03 ` Mark Haverkamp
0 siblings, 1 reply; 6+ messages in thread
From: Miek Gieben @ 2004-01-19 18:09 UTC (permalink / raw)
To: linux-kernel, Nathan Poznick
[On 19 Jan, @19:05, Mike wrote in "Re: aacraid and 2.6 ..."]
> > hmmm, did you have any luck with 2.6.1?
> >
> > In this case it's a SATA raid from Adaptec. So, if aacraid if not ide-raid, why
> > doesn't it work?
>
> And what errors did you get?
none, when modprobing aacraid it just said:
AAC-RAID ....etc...
and no device /dev/sde found stuff like under 2.4.
grtz
Miek
--
"So long, and thanks for all the fish."
-- Hitchhikers Guide to the Galaxy
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: aacraid and 2.6
2004-01-19 18:09 ` Miek Gieben
@ 2004-01-20 0:03 ` Mark Haverkamp
0 siblings, 0 replies; 6+ messages in thread
From: Mark Haverkamp @ 2004-01-20 0:03 UTC (permalink / raw)
To: Miek Gieben; +Cc: linux-kernel, Nathan Poznick
On Mon, 2004-01-19 at 10:09, Miek Gieben wrote:
> [On 19 Jan, @19:05, Mike wrote in "Re: aacraid and 2.6 ..."]
> > > hmmm, did you have any luck with 2.6.1?
> > >
> > > In this case it's a SATA raid from Adaptec. So, if aacraid if not ide-raid, why
> > > doesn't it work?
> >
> > And what errors did you get?
>
> none, when modprobing aacraid it just said:
> AAC-RAID ....etc...
>
> and no device /dev/sde found stuff like under 2.4.
>
> grtz
> Miek
> --
> "So long, and thanks for all the fish."
> -- Hitchhikers Guide to the Galaxy
It looks like there are some adapters in the 2.4 driver that aren't
specified in the 2.6 driver. Check linit.c in 2.4 and 2.6.
--
Mark Haverkamp <markh@osdl.org>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-01-20 0:33 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-19 10:26 aacraid and 2.6 Miek Gieben
2004-01-19 13:52 ` Nathan Poznick
2004-01-19 13:56 ` Miek Gieben
2004-01-19 18:05 ` Mike Fedyk
2004-01-19 18:09 ` Miek Gieben
2004-01-20 0:03 ` Mark Haverkamp
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox