* Re: Scsi devices not found
2004-01-19 20:44 Scsi devices not found Bob Gill
@ 2004-01-19 20:04 ` Ben Collins
2004-01-19 21:24 ` Bob Gill
0 siblings, 1 reply; 3+ messages in thread
From: Ben Collins @ 2004-01-19 20:04 UTC (permalink / raw)
To: Bob Gill; +Cc: Linux Kernel Mailing List
On Mon, Jan 19, 2004 at 01:44:43PM -0700, Bob Gill wrote:
> Hi. I was able to attach two firewire devices to 2.6.1-bk2, but with
> 2.6.1-bk4 and 2.6.1-bk5 they cannot be found (and they really are still
> attached). gscanbus cannot find them (nor can /proc/partitions or
> /proc/scsi/scsi). gscanbus reports:
I have this fixed in my tree. Just waiting on Linus or Andrew to pull
the two fixes in. If you can't wait, get the trunk from our SVN repo on
www.linux1394.org.
--
Debian - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
WatchGuard - http://www.watchguard.com/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Scsi devices not found
@ 2004-01-19 20:44 Bob Gill
2004-01-19 20:04 ` Ben Collins
0 siblings, 1 reply; 3+ messages in thread
From: Bob Gill @ 2004-01-19 20:44 UTC (permalink / raw)
To: Linux Kernel Mailing List
Hi. I was able to attach two firewire devices to 2.6.1-bk2, but with
2.6.1-bk4 and 2.6.1-bk5 they cannot be found (and they really are still
attached). gscanbus cannot find them (nor can /proc/partitions or
/proc/scsi/scsi). gscanbus reports:
[root@localhost gscanbus-0.7.1]# ./gscanbus
Error while reading from IEEE1394: : Invalid argument
something is wrong here
Error while reading from IEEE1394: : Invalid argument
Could not read topologyMap
Error while reading from IEEE1394: : Invalid argument
Could not read topologyMap
Error while reading from IEEE1394: : Invalid argument
Error while reading from IEEE1394: : Invalid argument
Error while reading from IEEE1394: : Invalid argument
Error while reading from IEEE1394: : Invalid argument
Error while reading from IEEE1394: : Invalid argument
Error while reading from IEEE1394: : Invalid argument
Error while reading from IEEE1394: : Invalid argument
Error while reading from IEEE1394: : Invalid argument
The modules I currently have loaded are as follows, sbp2 is not among
the modules, but loading it has no effect on gscanbus (loading sbp2 and
re-running gscanbus gives the same as above):
/sbin/lsmod
Module Size Used by
i2c_isa 1920 0
vfat 15360 0
fat 47264 1 vfat
i2c_algo_pcf 6404 0
it87 21256 0
i2c_sis96x 4740 0
i2c_sensor 2560 1 it87
video1394 20420 0
dv1394 26180 0
raw1394 39908 0
snd_pcm_oss 48932 0
snd_emu10k1 109828 1
snd_rawmidi 25504 1 snd_emu10k1
snd_pcm 99236 2 snd_pcm_oss,snd_emu10k1
snd_timer 29956 1 snd_pcm
snd_seq_device 7048 2 snd_emu10k1,snd_rawmidi
snd_ac97_codec 53124 1 snd_emu10k1
snd_page_alloc 9220 2 snd_emu10k1,snd_pcm
snd_util_mem 3712 1 snd_emu10k1
snd_hwdep 7968 1 snd_emu10k1
snd_mixer_oss 17152 2 snd_pcm_oss
snd 49636 10
snd_pcm_oss,snd_emu10k1,snd_rawmidi,snd_pcm,snd_timer,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep,snd_mixer_oss
sr_mod 13732 0
sd_mod 12576 0
imm 12424 0
ide_scsi 14084 0
tda9887 6532 0
tda9875 7172 0
tda7432 7052 0
msp3400 23972 0
tvaudio 21516 0
v4l1_compat 12932 0
tuner 14348 0
bttv 137836 0
video_buf 20228 1 bttv
i2c_algo_bit 8968 1 bttv
btcx_risc 4104 1 bttv
i2c_core 21512 13
i2c_isa,i2c_algo_pcf,it87,i2c_sis96x,i2c_sensor,tda9887,tda9875,tda7432,msp3400,tvaudio,tuner,bttv,i2c_algo_bit
v4l2_common 4096 1 bttv
videodev 7808 1 bttv
soundcore 8768 3 snd,bttv
ipt_ULOG 7816 0
ipt_ttl 1664 0
ipt_TOS 2176 0
ipt_tos 1536 0
ipt_TCPMSS 3712 0
ipt_tcpmss 1920 0
ipt_SAME 2176 0
ipt_REDIRECT 1920 0
ipt_recent 14476 0
ipt_pkttype 1536 0
ipt_owner 5888 0
ipt_NETMAP 1920 0
ipt_multiport 1792 0
ipt_MASQUERADE 3720 0
ipt_MARK 1920 0
ipt_mark 1536 0
ipt_mac 1792 0
ipt_LOG 5632 0
ipt_limit 2816 0
ipt_length 1536 0
ipt_iprange 1664 0
ipt_helper 2304 0
ipt_esp 1664 0
ipt_ECN 2688 0
ipt_ecn 1920 0
ipt_DSCP 2176 0
ipt_dscp 1536 0
ipt_conntrack 2176 0
ipt_CLASSIFY 1920 0
ipt_ah 1664 0
iptable_mangle 2304 0
ip_queue 9112 0
ip_nat_tftp 2928 0
ip_nat_snmp_basic 11268 0
ip_nat_irc 4848 0
ip_nat_ftp 6128 0
ip_nat_amanda 3644 0
iptable_nat 25772 9
ipt_SAME,ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,ip_nat_tftp,ip_nat_snmp_basic,ip_nat_irc,ip_nat_ftp,ip_nat_amanda
ip_conntrack_tftp 2964 0
ip_conntrack_irc 71316 1 ip_nat_irc
ip_conntrack_ftp 71956 1 ip_nat_ftp
ip_conntrack_amanda 69892 1 ip_nat_amanda
arpt_mangle 2048 0
arptable_filter 1792 0
arp_tables 13824 2 arpt_mangle,arptable_filter
ipip 9188 0
ip_gre 10528 0
ipt_REJECT 5632 1
ipt_state 1664 5
ip_conntrack 36036 16
ipt_SAME,ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,ipt_helper,ipt_conntrack,ip_nat_tftp,ip_nat_irc,ip_nat_ftp,ip_nat_amanda,iptable_nat,ip_conntrack_tftp,ip_conntrack_irc,ip_conntrack_ftp,ip_conntrack_amanda,ipt_state
iptable_filter 2432 1
ip_tables 18944 35
ipt_ULOG,ipt_ttl,ipt_TOS,ipt_tos,ipt_TCPMSS,ipt_tcpmss,ipt_SAME,ipt_REDIRECT,ipt_recent,ipt_pkttype,ipt_owner,ipt_NETMAP,ipt_multiport,ipt_MASQUERADE,ipt_MARK,ipt_mark,ipt_mac,ipt_LOG,ipt_limit,ipt_length,ipt_iprange,ipt_helper,ipt_esp,ipt_ECN,ipt_ecn,ipt_DSCP,ipt_dscp,ipt_conntrack,ipt_CLASSIFY,ipt_ah,iptable_mangle,iptable_nat,ipt_REJECT,ipt_state,iptable_filter
sis900 18052 0
ohci1394 38276 2 video1394,dv1394
ieee1394 75056 4 video1394,dv1394,raw1394,ohci1394
sg 29848 0
scsi_mod 112440 5 sr_mod,sd_mod,imm,ide_scsi,sg
reiserfs 235376 1
ext3 100488 1
jbd 85528 1 ext3
agpgart 26176 0
nvidia 2078472 12
I am running Fedora Core 1. I have added /sys and /udev (and both
appear to be working ok, but neither shows my lost drives with
2.6.1-bk5) Both *do* show all my drives on 2.6.1-bk2. I have grokked
google and lkml, but if I missed a change needed to get them showing up
please reply. Also, I'm not in the list, you will have to reply to me
directly. Thanks in advance,
Bob
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Scsi devices not found
2004-01-19 20:04 ` Ben Collins
@ 2004-01-19 21:24 ` Bob Gill
0 siblings, 0 replies; 3+ messages in thread
From: Bob Gill @ 2004-01-19 21:24 UTC (permalink / raw)
To: Ben Collins; +Cc: Linux Kernel Mailing List
Excellent, Thank You!
On Mon, 2004-01-19 at 13:04, Ben Collins wrote:
> On Mon, Jan 19, 2004 at 01:44:43PM -0700, Bob Gill wrote:
> > Hi. I was able to attach two firewire devices to 2.6.1-bk2, but with
> > 2.6.1-bk4 and 2.6.1-bk5 they cannot be found (and they really are still
> > attached). gscanbus cannot find them (nor can /proc/partitions or
> > /proc/scsi/scsi). gscanbus reports:
>
> I have this fixed in my tree. Just waiting on Linus or Andrew to pull
> the two fixes in. If you can't wait, get the trunk from our SVN repo on
> www.linux1394.org.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-01-19 21:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-19 20:44 Scsi devices not found Bob Gill
2004-01-19 20:04 ` Ben Collins
2004-01-19 21:24 ` Bob Gill
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox