From: Adrian Bunk <bunk@fs.tum.de>
To: Alex <alex@meerkatsoft.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Cannot Set DMA via hdparm
Date: Thu, 22 Jan 2004 20:43:22 +0100 [thread overview]
Message-ID: <20040122194322.GN6441@fs.tum.de> (raw)
In-Reply-To: <4000230D.109@meerkatsoft.com>
On Sun, Jan 11, 2004 at 01:06:37AM +0900, Alex wrote:
> Hi,
Hi Alex,
> I am having problems settng the DMA ( hdparm -d1 /dev/hda ) on a RH9
> 2.4.28 Linux machine.
I assume you are talking about 2.4.18?
> I always get the following error messages:
>
> HDIO_SET_DMA failed: Operatopm mpt @er,otted
> using_dma = 0 (off)
>
> The Disk ST3120026A is properly recognized. It appears that the
> motherboard is not supported. ( I am running linux on a Shuttle XPC with
> the ATI Radeon 9100IGP / IXP150 Chipset.
>
> Has anyone an idea how to get this dma setting work ?
> Will that chipset be supported in the future ?
It seems some experimental support for your chipset was added in later
2.4 kernels.
Could you try whether kernel 2.4.24 with the alim15x3 driver available
in the kernel configuration at
ATA/IDE/MFM/RLL support
ATA/IDE/MFM/RLL support
IDE, ATA and ATAPI Block devices
PCI IDE chipset support
Generic PCI bus-master DMA support
ALI M15x3 chipset support
works for you?
> Thanks
> Alex
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
prev parent reply other threads:[~2004-01-22 19:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-10 16:06 Cannot Set DMA via hdparm Alex
2004-01-22 19:43 ` Adrian Bunk [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040122194322.GN6441@fs.tum.de \
--to=bunk@fs.tum.de \
--cc=alex@meerkatsoft.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox