* [2.6.2-rc1] unknown i2c symbols in bttv and friends
@ 2004-01-23 18:38 Kiko Piris
2004-01-23 18:54 ` Kiko Piris
0 siblings, 1 reply; 2+ messages in thread
From: Kiko Piris @ 2004-01-23 18:38 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 427 bytes --]
Hi,
I compiled 2.6.2-rc1 and I can't use my Pinnacle PCTV card because bbtv
module and friends refuse to load due to unknown i2c_* symbols. dmesg
relevant part is attached (kernel config is also - grep ^CONFIG -).
I suspect it's due to not setting these new options: CONFIG_I2C_DEBUG_CORE,
CONFIG_I2C_DEBUG_BUS and CONFIG_I2C_DEBUG_CHIP.
Please let me know if I should provide any additional information.
Thanks.
--
Kiko
[-- Attachment #2: dmesg.gz --]
[-- Type: application/octet-stream, Size: 398 bytes --]
[-- Attachment #3: config.gz --]
[-- Type: application/octet-stream, Size: 2128 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [2.6.2-rc1] unknown i2c symbols in bttv and friends
2004-01-23 18:38 [2.6.2-rc1] unknown i2c symbols in bttv and friends Kiko Piris
@ 2004-01-23 18:54 ` Kiko Piris
0 siblings, 0 replies; 2+ messages in thread
From: Kiko Piris @ 2004-01-23 18:54 UTC (permalink / raw)
To: linux-kernel
On 23/01/2004 at 19:38, Kiko Piris wrote:
> I compiled 2.6.2-rc1 and I can't use my Pinnacle PCTV card because bbtv
> module and friends refuse to load due to unknown i2c_* symbols. dmesg
> relevant part is attached (kernel config is also - grep ^CONFIG -).
My fault. I had a forgotten line
options i2c-core i2c_debug=1
in modprobe.conf. Of course they wheren't loading! :-[
Sorry for the noise.
--
Kiko
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-01-23 18:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-23 18:38 [2.6.2-rc1] unknown i2c symbols in bttv and friends Kiko Piris
2004-01-23 18:54 ` Kiko Piris
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox