* Kernels > 2.6.1-mm3 do not boot. @ 2004-01-24 4:53 Eric 2004-01-24 6:11 ` Eric 0 siblings, 1 reply; 68+ messages in thread From: Eric @ 2004-01-24 4:53 UTC (permalink / raw) To: linux-kernel Hello. I am unable to boot with kernels greater than 2.6.1-mm3. I do not recall if mm3 booted or not, but I know for sure that mm4 and rc1-mm1 are broken for me. When I try to boot the selected kernel I see uncompressing kernel.....then booting kernel. and then, nothing. It stops all activity. I still see the message uncompressing kernel, the screen doesn't go blank or anything. The new CPU options confuse me, (Why multiple CPU's?) Usually that is the problem when the kernel cant boot so early. I tried a kernel with ONLY 386 selected, ONLY athlon selected, and one with all the cpu's athlon and below (architecture wise, not below menu-wise) I tried setting/unsetting the regparam and booting with acpi=off and disabling/enabling PnP in my BIOS. I am What has changed in these later versions? MSI-K7d Master 2 x Athlon MP 2000 1GB Ram eric:/home/bot403 # gcc -v Reading specs from /usr/lib/gcc-lib/i486-suse-linux/3.3/specs Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --libdir=/usr/lib --enable-languages=c,c++,f77,objc,java,ada --disable-checking --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib --with-system-zlib --enable-shared --enable-__cxa_atexit i486-suse-linux Thread model: posix gcc version 3.3 20030226 (prerelease) (SuSE Linux) eric:/home/bot403 #cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 8 model name : AMD Athlon(tm) MP 2000+ stepping : 1 cpu MHz : 1667.562 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow bogomips : 1642.49 processor : 1 vendor_id : AuthenticAMD cpu family : 6 model : 8 model name : AMD Athlon(tm) MP stepping : 1 cpu MHz : 1667.562 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow bogomips : 1662.97 ------------------------- Eric Bambach Eric at cisu dot net ------------------------- ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-24 4:53 Kernels > 2.6.1-mm3 do not boot Eric @ 2004-01-24 6:11 ` Eric 2004-01-24 22:39 ` Eric 0 siblings, 1 reply; 68+ messages in thread From: Eric @ 2004-01-24 6:11 UTC (permalink / raw) To: linux-kernel; +Cc: Andrew Morton [-- Attachment #1: Type: text/plain, Size: 469 bytes --] On Friday 23 January 2004 22:53, Eric wrote: > Hello. > I am unable to boot with kernels greater than 2.6.1-mm3. I do not recall > if mm3 booted or not, but I know for sure that mm4 and rc1-mm1 are broken > for me. When I try to boot the selected kernel I see uncompressing > kernel.....then booting kernel. Very sorry, here is the .config i MEANT to attach but got distracted. ------------------------- Eric Bambach Eric at cisu dot net ------------------------- [-- Attachment #2: .config --] [-- Type: text/plain, Size: 28772 bytes --] # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_STANDALONE=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # # Processor support # # # Select all processors your kernel should support # # CONFIG_CPU_386 is not set # CONFIG_CPU_486 is not set # CONFIG_CPU_586 is not set # CONFIG_CPU_586TSC is not set # CONFIG_CPU_586MMX is not set # CONFIG_CPU_686 is not set # CONFIG_CPU_PENTIUMII is not set # CONFIG_CPU_PENTIUMIII is not set # CONFIG_CPU_PENTIUMM is not set # CONFIG_CPU_PENTIUM4 is not set # CONFIG_CPU_K6 is not set CONFIG_CPU_K7=y # CONFIG_CPU_K8 is not set # CONFIG_CPU_CRUSOE is not set # CONFIG_CPU_WINCHIPC6 is not set # CONFIG_CPU_WINCHIP2 is not set # CONFIG_CPU_WINCHIP3D is not set # CONFIG_CPU_CYRIXIII is not set # CONFIG_CPU_VIAC3_2 is not set CONFIG_CPU_ONLY_K7=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y # CONFIG_X86_4G is not set # CONFIG_X86_SWITCH_PAGETABLES is not set # CONFIG_X86_4G_VM_LAYOUT is not set # CONFIG_X86_UACCESS_INDIRECT is not set # CONFIG_X86_HIGH_ENTRY is not set # CONFIG_HPET_TIMER is not set # CONFIG_HPET_EMULATE_RTC is not set CONFIG_SMP=y CONFIG_NR_CPUS=2 # CONFIG_SCHED_SMT is not set CONFIG_PREEMPT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_MICROCODE=m CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # CONFIG_EDD is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y # CONFIG_REGPARM is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set # CONFIG_PM_DISK is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_ASUS=m CONFIG_ACPI_TOSHIBA=m # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_RELAXED_AML is not set CONFIG_X86_PM_TIMER=y # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_USE_VECTOR=y # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_HOTPLUG is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # # Device Drivers # # # Generic Driver Options # # # Memory Technology Devices (MTD) # CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set CONFIG_MTD_PARTITIONS=m CONFIG_MTD_CONCAT=m CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_CMDLINE_PARTS=m # # User Modules And Translation Layers # CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=m CONFIG_MTD_BLOCK_RO=m CONFIG_FTL=m CONFIG_NFTL=m # CONFIG_NFTL_RW is not set # CONFIG_INFTL is not set # # RAM/ROM/Flash chip drivers # # CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLKMTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set # # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_ISAPNP is not set CONFIG_PNPBIOS=y # CONFIG_PNPBIOS_PROC_FS is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y CONFIG_LBD=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_AEC62XX=m CONFIG_BLK_DEV_ALI15X3=m # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y CONFIG_BLK_DEV_CMD64X=m CONFIG_BLK_DEV_TRIFLEX=m CONFIG_BLK_DEV_CY82C693=m CONFIG_BLK_DEV_CS5520=m CONFIG_BLK_DEV_CS5530=m CONFIG_BLK_DEV_HPT34X=m CONFIG_BLK_DEV_HPT366=m CONFIG_BLK_DEV_SC1200=m CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_NS87415=m CONFIG_BLK_DEV_PDC202XX_OLD=m CONFIG_BLK_DEV_PDC202XX_NEW=m CONFIG_BLK_DEV_SVWKS=m CONFIG_BLK_DEV_SIIMAGE=m CONFIG_BLK_DEV_SIS5513=m CONFIG_BLK_DEV_SLC90E66=m CONFIG_BLK_DEV_TRM290=m CONFIG_BLK_DEV_VIA82CXXX=m CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_MAX_SD_DISKS=256 CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_REPORT_LUNS=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=64 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=128 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX_CONFIG=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA23XX is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y # CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=m # CONFIG_BLK_DEV_DM is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # CONFIG_IEEE1394=y # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set # # Device Drivers # # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=y # # Protocol Drivers # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y CONFIG_IEEE1394_CMP=m # CONFIG_IEEE1394_AMDTP is not set # # I2O device support # CONFIG_I2O=m CONFIG_I2O_PCI=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_IPV6 is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_NETFILTER is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m # CONFIG_HP100 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m CONFIG_ADAPTEC_STARFIRE=m CONFIG_ADAPTEC_STARFIRE_NAPI=y CONFIG_B44=m # CONFIG_FORCEDETH is not set CONFIG_DGRS=m CONFIG_EEPRO100=m # CONFIG_EEPRO100_PIO is not set CONFIG_E100=m # CONFIG_E100_NAPI is not set CONFIG_FEALNX=m CONFIG_NATSEMI=y CONFIG_NE2K_PCI=m CONFIG_8139CP=m CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_8139_RXBUF_IDX=2 CONFIG_SIS900=m CONFIG_EPIC100=m CONFIG_SUNDANCE=m CONFIG_SUNDANCE_MMIO=y CONFIG_TLAN=m CONFIG_VIA_RHINE=m # CONFIG_VIA_RHINE_MMIO is not set # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m CONFIG_E1000_NAPI=y CONFIG_NS83820=y CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_R8169=m CONFIG_SIS190=m CONFIG_SK98LIN=m CONFIG_TIGON3=m # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=y CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPPOE=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # Bluetooth support # # CONFIG_BT is not set # CONFIG_KGDBOE is not set # CONFIG_NETPOLL is not set # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # CONFIG_GAMEPORT=y CONFIG_SOUND_GAMEPORT=y CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m CONFIG_GAMEPORT_EMU10K1=m CONFIG_GAMEPORT_VORTEX=m CONFIG_GAMEPORT_FM801=m CONFIG_GAMEPORT_CS461x=m CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m CONFIG_SERIO_CT82C710=m CONFIG_SERIO_PARKBD=m CONFIG_SERIO_PCIPS2=m # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m CONFIG_JOYSTICK_ADI=m CONFIG_JOYSTICK_COBRA=m CONFIG_JOYSTICK_GF2K=m CONFIG_JOYSTICK_GRIP=m CONFIG_JOYSTICK_GRIP_MP=m CONFIG_JOYSTICK_GUILLEMOT=m CONFIG_JOYSTICK_INTERACT=m CONFIG_JOYSTICK_SIDEWINDER=m CONFIG_JOYSTICK_TMDC=m CONFIG_JOYSTICK_IFORCE=m CONFIG_JOYSTICK_IFORCE_USB=y CONFIG_JOYSTICK_IFORCE_232=y CONFIG_JOYSTICK_WARRIOR=m CONFIG_JOYSTICK_MAGELLAN=m CONFIG_JOYSTICK_SPACEORB=m CONFIG_JOYSTICK_SPACEBALL=m CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDDLER=m CONFIG_JOYSTICK_DB9=m CONFIG_JOYSTICK_GAMECON=m CONFIG_JOYSTICK_TURBOGRAFX=m CONFIG_INPUT_JOYDUMP=m # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=m # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=m CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m CONFIG_TIPAR=m # # Mice # CONFIG_BUSMOUSE=m # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_SOFT_WATCHDOG=m CONFIG_WDT=m # CONFIG_WDT_501 is not set CONFIG_WDTPCI=m # CONFIG_WDT_501_PCI is not set CONFIG_PCWATCHDOG=m CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m CONFIG_EUROTECH_WDT=m CONFIG_IB700_WDT=m CONFIG_I810_TCO=m CONFIG_MIXCOMWD=m CONFIG_SCx200_WDT=m CONFIG_60XX_WDT=m CONFIG_W83877F_WDT=m CONFIG_W83627HF_WDT=m CONFIG_MACHZ_WDT=m CONFIG_SC520_WDT=m CONFIG_AMD7XX_TCO=m CONFIG_ALIM7101_WDT=m CONFIG_ALIM1535_WDT=m CONFIG_SC1200_WDT=m CONFIG_WAFER_WDT=m CONFIG_CPU5_WDT=m CONFIG_HW_RANDOM=y CONFIG_NVRAM=m CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # CONFIG_AGP=y CONFIG_AGP_ALI=m CONFIG_AGP_ATI=m CONFIG_AGP_AMD=y CONFIG_AGP_AMD64=m CONFIG_AGP_INTEL=m CONFIG_AGP_NVIDIA=m CONFIG_AGP_SIS=m CONFIG_AGP_SWORKS=m CONFIG_AGP_VIA=m CONFIG_DRM=y CONFIG_DRM_TDFX=m CONFIG_DRM_GAMMA=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HANGCHECK_TIMER=m # # I2C support # CONFIG_I2C=m CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCF=m # # I2C Hardware Bus support # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD8111=m CONFIG_I2C_ELV=m CONFIG_I2C_I801=m CONFIG_I2C_I810=m CONFIG_I2C_ISA=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_PHILIPSPAR=m CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_PIIX4=m CONFIG_I2C_PROSAVAGE=m CONFIG_I2C_SAVAGE4=m CONFIG_SCx200_ACB=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_VELLEMAN=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m CONFIG_I2C_VOODOO3=m # # I2C Hardware Sensors Chip support # CONFIG_I2C_SENSOR=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83L785TS=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m # # Video For Linux # # # Video Adapters # CONFIG_VIDEO_BT848=m CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m CONFIG_VIDEO_CPIA=m CONFIG_VIDEO_CPIA_USB=m CONFIG_VIDEO_SAA5249=m CONFIG_TUNER_3036=m CONFIG_VIDEO_STRADIS=m CONFIG_VIDEO_ZORAN=m CONFIG_VIDEO_ZORAN_BUZ=m CONFIG_VIDEO_ZORAN_DC10=m CONFIG_VIDEO_ZORAN_DC30=m CONFIG_VIDEO_ZORAN_LML33=m CONFIG_VIDEO_ZORAN_LML33R10=m CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_MXB=m CONFIG_VIDEO_DPC=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_HEXIUM_GEMINI=m CONFIG_VIDEO_CX88=m # # Radio Adapters # CONFIG_RADIO_GEMTEK_PCI=m CONFIG_RADIO_MAXIRADIO=m CONFIG_RADIO_MAESTRO=m # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_VIDEO_VIDEOBUF=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_BUF=m CONFIG_VIDEO_BTCX=m CONFIG_VIDEO_IR=m # # Graphics support # CONFIG_FB=y CONFIG_FB_CYBER2000=m # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m # CONFIG_FB_VESA is not set CONFIG_VIDEO_SELECT=y CONFIG_FB_HGA=m CONFIG_FB_RIVA=m CONFIG_FB_I810=m # CONFIG_FB_I810_GTF is not set CONFIG_FB_MATROX=m # CONFIG_FB_MATROX_MILLENIUM is not set # CONFIG_FB_MATROX_MYSTIQUE is not set # CONFIG_FB_MATROX_G450 is not set # CONFIG_FB_MATROX_G100A is not set # CONFIG_FB_MATROX_I2C is not set # CONFIG_FB_MATROX_MULTIHEAD is not set CONFIG_FB_RADEON=m CONFIG_FB_ATY128=m CONFIG_FB_ATY=m # CONFIG_FB_ATY_CT is not set # CONFIG_FB_ATY_GX is not set CONFIG_FB_SIS=m # CONFIG_FB_SIS_300 is not set # CONFIG_FB_SIS_315 is not set CONFIG_FB_NEOMAGIC=m # CONFIG_FB_KYRO is not set CONFIG_FB_3DFX=m CONFIG_FB_VOODOO1=m CONFIG_FB_TRIDENT=m CONFIG_FB_VIRTUAL=m # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_PCI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m # # PCI devices # CONFIG_SND_ALI5451=m CONFIG_SND_AZT3328=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=y CONFIG_SND_KORG1212=m CONFIG_SND_NM256=m CONFIG_SND_RME32=m CONFIG_SND_RME96=m CONFIG_SND_RME9652=m CONFIG_SND_HDSP=m CONFIG_SND_TRIDENT=m CONFIG_SND_YMFPCI=m CONFIG_SND_ALS4000=m CONFIG_SND_CMIPCI=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m CONFIG_SND_ES1938=m CONFIG_SND_ES1968=m CONFIG_SND_MAESTRO3=m CONFIG_SND_FM801=m CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_SONICVIBES=m CONFIG_SND_VIA82XX=m CONFIG_SND_VX222=m # # ALSA USB devices # CONFIG_SND_USB_AUDIO=m # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=y CONFIG_USB_DEBUG=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # CONFIG_USB_AUDIO=m CONFIG_USB_BLUETOOTH_TTY=m CONFIG_USB_MIDI=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_HP8200e=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # # USB Human Interface Devices (HID) # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set CONFIG_USB_AIPTEK=m CONFIG_USB_WACOM=m CONFIG_USB_KBTAB=m CONFIG_USB_POWERMATE=m CONFIG_USB_XPAD=m # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_SCANNER=m CONFIG_USB_MICROTEK=m CONFIG_USB_HPUSBSCSI=m # # USB Multimedia devices # CONFIG_USB_DABUSB=m CONFIG_USB_VICAM=m CONFIG_USB_DSBR=m CONFIG_USB_IBMCAM=m CONFIG_USB_KONICAWC=m CONFIG_USB_OV511=m CONFIG_USB_PWC=m CONFIG_USB_SE401=m CONFIG_USB_STV680=m CONFIG_USB_W9968CF=m # # USB Network adaptors # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m # # USB Host-to-Host Cables # CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_GENESYS=y CONFIG_USB_NET1080=y CONFIG_USB_PL2301=y # # Intelligent USB Devices/Gadgets # CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_ZAURUS=y CONFIG_USB_CDCETHER=y # # USB Network Adapters # CONFIG_USB_AX8817X=y # # USB port drivers # CONFIG_USB_USS720=m # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set CONFIG_USB_EMI26=m CONFIG_USB_TIGL=m CONFIG_USB_AUERSWALD=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_BRLVGER=m CONFIG_USB_LCD=m # CONFIG_USB_LED is not set CONFIG_USB_TEST=m CONFIG_USB_GADGET=m CONFIG_USB_NET2280=m CONFIG_USB_ZERO=m CONFIG_USB_ZERO_NET2280=y CONFIG_USB_ETH=m CONFIG_USB_ETH_NET2280=y CONFIG_USB_GADGETFS=m CONFIG_USB_GADGETFS_NET2280=y # CONFIG_USB_G_SERIAL is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_SUNRPC=m # CONFIG_SUNRPC_GSS is not set CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_SPINLINE is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_INFO is not set # CONFIG_LOCKMETER is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_KGDB is not set # CONFIG_FRAME_POINTER is not set CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_CAPABILITIES is not set CONFIG_SECURITY_ROOTPLUG=m # CONFIG_SECURITY_SELINUX is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_TEST=m # # Library routines # CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_PC=y ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-24 6:11 ` Eric @ 2004-01-24 22:39 ` Eric 2004-01-25 1:02 ` Adrian Bunk 0 siblings, 1 reply; 68+ messages in thread From: Eric @ 2004-01-24 22:39 UTC (permalink / raw) To: linux-kernel On Saturday 24 January 2004 00:11, Eric wrote: > On Friday 23 January 2004 22:53, Eric wrote: > > Hello. > > I am unable to boot with kernels greater than 2.6.1-mm3. I do not recall > > if mm3 booted or not, but I know for sure that mm4 and rc1-mm1 are broken > > for me. When I try to boot the selected kernel I see uncompressing > > kernel.....then booting kernel. > > Very sorry, here is the .config i MEANT to attach but got distracted. Confirmed, the same problem when I recompiled and tried (just now) 2.6.1-rc1-mm1 2.6.1-rc1-mm2 What changed? Why am I suddenly locked out of all newer kernel versions? I am using vanilla sources with nothing other than mm patches. ------------------------- Eric Bambach Eric at cisu dot net ------------------------- ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-24 22:39 ` Eric @ 2004-01-25 1:02 ` Adrian Bunk 2004-01-25 4:03 ` Eric 2004-01-25 13:52 ` Fabio Coatti 0 siblings, 2 replies; 68+ messages in thread From: Adrian Bunk @ 2004-01-25 1:02 UTC (permalink / raw) To: Eric; +Cc: linux-kernel On Sat, Jan 24, 2004 at 04:39:23PM -0600, Eric wrote: > On Saturday 24 January 2004 00:11, Eric wrote: > > On Friday 23 January 2004 22:53, Eric wrote: > > > Hello. > > > I am unable to boot with kernels greater than 2.6.1-mm3. I do not recall > > > if mm3 booted or not, but I know for sure that mm4 and rc1-mm1 are broken > > > for me. When I try to boot the selected kernel I see uncompressing > > > kernel.....then booting kernel. > > > > Very sorry, here is the .config i MEANT to attach but got distracted. > > Confirmed, the same problem when I recompiled and tried (just now) > > 2.6.1-rc1-mm1 > 2.6.1-rc1-mm2 > > What changed? Why am I suddenly locked out of all newer kernel versions? > I am using vanilla sources with nothing other than mm patches. Please check exactly between which two kernel versions the problem first appeared. Please send the .config of the last kernel that worked for you. > Eric Bambach cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-25 1:02 ` Adrian Bunk @ 2004-01-25 4:03 ` Eric 2004-01-25 13:15 ` Adrian Bunk 2004-01-25 13:52 ` Fabio Coatti 1 sibling, 1 reply; 68+ messages in thread From: Eric @ 2004-01-25 4:03 UTC (permalink / raw) To: Adrian Bunk; +Cc: linux-kernel, Andrew Morton On Saturday 24 January 2004 19:02, Adrian Bunk wrote: > On Sat, Jan 24, 2004 at 04:39:23PM -0600, Eric wrote: > > On Saturday 24 January 2004 00:11, Eric wrote: > > > On Friday 23 January 2004 22:53, Eric wrote: > > > > Hello. > > > > I am unable to boot with kernels greater than 2.6.1-mm3. I do not > > > > recall if mm3 booted or not, but I know for sure that mm4 and rc1-mm1 > > > > are broken for me. When I try to boot the selected kernel I see > > > > uncompressing kernel.....then booting kernel. > > > > > > Very sorry, here is the .config i MEANT to attach but got distracted. > > > > Confirmed, the same problem when I recompiled and tried (just now) > > > > 2.6.1-rc1-mm1 > > 2.6.1-rc1-mm2 > > > > What changed? Why am I suddenly locked out of all newer kernel versions? > > I am using vanilla sources with nothing other than mm patches. > > Please check exactly between which two kernel versions the problem > first appeared. The current kernel I am using. Last kernel I trust. #uname -a Linux eric 2.6.1-mm1 #1 SMP Thu Jan 15 22:07:05 CST 2004 i686 unknown unknown GNU/Linux Just booted 2.6.1-mm2 Bare config. Just bzipped, patched and set cpu-type. Works ok Just booted 2.6.1-mm3 Bare config also. Worked Trying 2.6.1-mm4. This is where the new cpu options are introduced. I selected 586 only. I am attaching the .config that failed. Please note though, in all these kernels I just tested+booted I did NO custom configuration beyond selecting a CPU type. I did not boot them to my root fs, because that would require SCSI drivers and FS drivers. I only booted them to a kernel panic (unable to mount root fs...obviously) You can emulate any of my tests by unzipping the vanilla kernel, patching to a mm series and seleting a cpu type. I have a strange suspicion that the new cpu options are to blame. I am by no means a kernel hacker, but I've never had a problem like this where I am locked out of a whole series of kernels, or where they would stop booting. Possibly the new CPU selection options are generating bad code with my gcc? I am pasting 2 configs inline the e-mail here. The first is one similar to the options I always use for my 2.6 kernels. SMP/my scsi drivers, etc. The second one is the .config of the 2.6.1-mm4 kernel that did not boot. No kernel after this series will boot with any config (that I know of). Possibly you can suggest some options for unravelling this mystery. I am also including a lspci at the end. See the lkml thread for this for my cpuinfo. I feel bad making this message as long as it is already. Thanks in advance for you time and effort on this problem. -----------2.6.1-mm1 .config # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_STANDALONE=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y # CONFIG_X86_4G is not set # CONFIG_X86_SWITCH_PAGETABLES is not set # CONFIG_X86_4G_VM_LAYOUT is not set # CONFIG_X86_UACCESS_INDIRECT is not set # CONFIG_X86_HIGH_ENTRY is not set # CONFIG_HPET_TIMER is not set # CONFIG_HPET_EMULATE_RTC is not set CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_MICROCODE=m CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # CONFIG_EDD is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set # CONFIG_PM_DISK is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_ASUS=m CONFIG_ACPI_TOSHIBA=m # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_RELAXED_AML is not set CONFIG_X86_PM_TIMER=y # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_USE_VECTOR=y # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_HOTPLUG is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # # Device Drivers # # # Generic Driver Options # # # Memory Technology Devices (MTD) # CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set CONFIG_MTD_PARTITIONS=m CONFIG_MTD_CONCAT=m CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_CMDLINE_PARTS=m # # User Modules And Translation Layers # CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=m CONFIG_MTD_BLOCK_RO=m CONFIG_FTL=m CONFIG_NFTL=m # CONFIG_NFTL_RW is not set # CONFIG_INFTL is not set # # RAM/ROM/Flash chip drivers # # CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLKMTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set # # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_ISAPNP is not set CONFIG_PNPBIOS=y # CONFIG_PNPBIOS_PROC_FS is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y CONFIG_LBD=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_AEC62XX=m CONFIG_BLK_DEV_ALI15X3=m # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y CONFIG_BLK_DEV_CMD64X=m CONFIG_BLK_DEV_TRIFLEX=m CONFIG_BLK_DEV_CY82C693=m CONFIG_BLK_DEV_CS5520=m CONFIG_BLK_DEV_CS5530=m CONFIG_BLK_DEV_HPT34X=m CONFIG_BLK_DEV_HPT366=m CONFIG_BLK_DEV_SC1200=m CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_NS87415=m CONFIG_BLK_DEV_PDC202XX_OLD=m CONFIG_BLK_DEV_PDC202XX_NEW=m CONFIG_BLK_DEV_SVWKS=m CONFIG_BLK_DEV_SIIMAGE=m CONFIG_BLK_DEV_SIS5513=m CONFIG_BLK_DEV_SLC90E66=m CONFIG_BLK_DEV_TRM290=m CONFIG_BLK_DEV_VIA82CXXX=m CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_MAX_SD_DISKS=256 CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_REPORT_LUNS=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=64 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=128 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m # CONFIG_BLK_DEV_DM is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # CONFIG_IEEE1394=y # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set # # Device Drivers # # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=y # # Protocol Drivers # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m CONFIG_IEEE1394_CMP=m # CONFIG_IEEE1394_AMDTP is not set # # I2O device support # CONFIG_I2O=m CONFIG_I2O_PCI=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_IPV6 is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_NETFILTER is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m # CONFIG_HP100 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m CONFIG_ADAPTEC_STARFIRE=m CONFIG_ADAPTEC_STARFIRE_NAPI=y CONFIG_B44=m CONFIG_FORCEDETH=m CONFIG_DGRS=m CONFIG_EEPRO100=m # CONFIG_EEPRO100_PIO is not set CONFIG_E100=m CONFIG_E100_NAPI=y CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NE2K_PCI=m CONFIG_8139CP=m CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_8139_RXBUF_IDX=3 CONFIG_SIS900=m CONFIG_EPIC100=m CONFIG_SUNDANCE=m CONFIG_SUNDANCE_MMIO=y CONFIG_TLAN=m CONFIG_VIA_RHINE=m # CONFIG_VIA_RHINE_MMIO is not set # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m CONFIG_E1000_NAPI=y CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_R8169=m CONFIG_SIS190=m CONFIG_SK98LIN=m CONFIG_TIGON3=m # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=y CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPPOE=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=m # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # Bluetooth support # # CONFIG_BT is not set # CONFIG_KGDBOE is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # CONFIG_GAMEPORT=m CONFIG_SOUND_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m CONFIG_GAMEPORT_EMU10K1=m CONFIG_GAMEPORT_VORTEX=m CONFIG_GAMEPORT_FM801=m CONFIG_GAMEPORT_CS461x=m CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m CONFIG_SERIO_CT82C710=m CONFIG_SERIO_PARKBD=m CONFIG_SERIO_PCIPS2=m # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m CONFIG_JOYSTICK_ADI=m CONFIG_JOYSTICK_COBRA=m CONFIG_JOYSTICK_GF2K=m CONFIG_JOYSTICK_GRIP=m CONFIG_JOYSTICK_GRIP_MP=m CONFIG_JOYSTICK_GUILLEMOT=m CONFIG_JOYSTICK_INTERACT=m CONFIG_JOYSTICK_SIDEWINDER=m CONFIG_JOYSTICK_TMDC=m CONFIG_JOYSTICK_IFORCE=m CONFIG_JOYSTICK_IFORCE_USB=y CONFIG_JOYSTICK_IFORCE_232=y CONFIG_JOYSTICK_WARRIOR=m CONFIG_JOYSTICK_MAGELLAN=m CONFIG_JOYSTICK_SPACEORB=m CONFIG_JOYSTICK_SPACEBALL=m CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDDLER=m CONFIG_JOYSTICK_DB9=m CONFIG_JOYSTICK_GAMECON=m CONFIG_JOYSTICK_TURBOGRAFX=m CONFIG_INPUT_JOYDUMP=m # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=m # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=m CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m CONFIG_TIPAR=m # # I2C support # CONFIG_I2C=m CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCF=m # # I2C Hardware Bus support # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m CONFIG_I2C_I810=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_PHILIPSPAR=m CONFIG_I2C_PIIX4=m CONFIG_I2C_PROSAVAGE=m CONFIG_I2C_SAVAGE4=m CONFIG_SCx200_ACB=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m CONFIG_I2C_VOODOO3=m # # I2C Hardware Sensors Chip support # CONFIG_I2C_SENSOR=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_W83781D=m # # Mice # CONFIG_BUSMOUSE=m # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_SOFT_WATCHDOG=m CONFIG_WDT=m # CONFIG_WDT_501 is not set CONFIG_WDTPCI=m # CONFIG_WDT_501_PCI is not set CONFIG_PCWATCHDOG=m CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m CONFIG_EUROTECH_WDT=m CONFIG_IB700_WDT=m CONFIG_I810_TCO=m CONFIG_MIXCOMWD=m CONFIG_SCx200_WDT=m CONFIG_60XX_WDT=m CONFIG_W83877F_WDT=m CONFIG_W83627HF_WDT=m CONFIG_MACHZ_WDT=m CONFIG_SC520_WDT=m CONFIG_AMD7XX_TCO=m CONFIG_ALIM7101_WDT=m CONFIG_ALIM1535_WDT=m CONFIG_SC1200_WDT=m CONFIG_WAFER_WDT=m CONFIG_CPU5_WDT=m CONFIG_HW_RANDOM=y CONFIG_NVRAM=m CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # CONFIG_AGP=y CONFIG_AGP_ALI=m CONFIG_AGP_ATI=m CONFIG_AGP_AMD=y CONFIG_AGP_AMD64=m CONFIG_AGP_INTEL=m CONFIG_AGP_NVIDIA=m CONFIG_AGP_SIS=m CONFIG_AGP_SWORKS=m CONFIG_AGP_VIA=m CONFIG_DRM=y CONFIG_DRM_TDFX=m CONFIG_DRM_GAMMA=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HANGCHECK_TIMER=m # # Multimedia devices # CONFIG_VIDEO_DEV=m # # Video For Linux # # # Video Adapters # CONFIG_VIDEO_BT848=m CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m CONFIG_VIDEO_CPIA=m CONFIG_VIDEO_CPIA_USB=m CONFIG_VIDEO_SAA5249=m CONFIG_TUNER_3036=m CONFIG_VIDEO_STRADIS=m CONFIG_VIDEO_ZORAN=m CONFIG_VIDEO_ZORAN_BUZ=m CONFIG_VIDEO_ZORAN_DC10=m CONFIG_VIDEO_ZORAN_DC30=m CONFIG_VIDEO_ZORAN_LML33=m CONFIG_VIDEO_ZORAN_LML33R10=m CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_MXB=m CONFIG_VIDEO_DPC=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_HEXIUM_GEMINI=m # # Radio Adapters # CONFIG_RADIO_GEMTEK_PCI=m CONFIG_RADIO_MAXIRADIO=m CONFIG_RADIO_MAESTRO=m # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_VIDEO_VIDEOBUF=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_BUF=m CONFIG_VIDEO_BTCX=m # # Graphics support # CONFIG_FB=y CONFIG_FB_CYBER2000=m # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m # CONFIG_FB_VESA is not set CONFIG_VIDEO_SELECT=y CONFIG_FB_HGA=m CONFIG_FB_RIVA=m CONFIG_FB_I810=m # CONFIG_FB_I810_GTF is not set CONFIG_FB_MATROX=m # CONFIG_FB_MATROX_MILLENIUM is not set # CONFIG_FB_MATROX_MYSTIQUE is not set # CONFIG_FB_MATROX_G450 is not set # CONFIG_FB_MATROX_G100A is not set # CONFIG_FB_MATROX_I2C is not set # CONFIG_FB_MATROX_MULTIHEAD is not set CONFIG_FB_RADEON=m CONFIG_FB_ATY128=m CONFIG_FB_ATY=m # CONFIG_FB_ATY_CT is not set # CONFIG_FB_ATY_GX is not set CONFIG_FB_SIS=m # CONFIG_FB_SIS_300 is not set # CONFIG_FB_SIS_315 is not set CONFIG_FB_NEOMAGIC=m CONFIG_FB_3DFX=m CONFIG_FB_VOODOO1=m CONFIG_FB_TRIDENT=m CONFIG_FB_VIRTUAL=m # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_PCI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m # # PCI devices # CONFIG_SND_ALI5451=m CONFIG_SND_AZT3328=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=y CONFIG_SND_KORG1212=m CONFIG_SND_NM256=m CONFIG_SND_RME32=m CONFIG_SND_RME96=m CONFIG_SND_RME9652=m CONFIG_SND_HDSP=m CONFIG_SND_TRIDENT=m CONFIG_SND_YMFPCI=m CONFIG_SND_ALS4000=m CONFIG_SND_CMIPCI=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m CONFIG_SND_ES1938=m CONFIG_SND_ES1968=m CONFIG_SND_MAESTRO3=m CONFIG_SND_FM801=m CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_SONICVIBES=m CONFIG_SND_VIA82XX=m CONFIG_SND_VX222=m # # ALSA USB devices # CONFIG_SND_USB_AUDIO=m # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=y CONFIG_USB_DEBUG=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # CONFIG_USB_AUDIO=m CONFIG_USB_BLUETOOTH_TTY=m CONFIG_USB_MIDI=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_HP8200e=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # # USB Human Interface Devices (HID) # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set CONFIG_USB_AIPTEK=m CONFIG_USB_WACOM=m CONFIG_USB_KBTAB=m CONFIG_USB_POWERMATE=m CONFIG_USB_XPAD=m # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_SCANNER=m CONFIG_USB_MICROTEK=m CONFIG_USB_HPUSBSCSI=m # # USB Multimedia devices # CONFIG_USB_DABUSB=m CONFIG_USB_VICAM=m CONFIG_USB_DSBR=m CONFIG_USB_IBMCAM=m CONFIG_USB_KONICAWC=m CONFIG_USB_OV511=m CONFIG_USB_PWC=m CONFIG_USB_SE401=m CONFIG_USB_STV680=m CONFIG_USB_W9968CF=m # # USB Network adaptors # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m # # USB Host-to-Host Cables # CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_GENESYS=y CONFIG_USB_NET1080=y CONFIG_USB_PL2301=y # # Intelligent USB Devices/Gadgets # CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_ZAURUS=y CONFIG_USB_CDCETHER=y # # USB Network Adapters # CONFIG_USB_AX8817X=y # # USB port drivers # CONFIG_USB_USS720=m # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # CONFIG_USB_EMI26=m CONFIG_USB_TIGL=m CONFIG_USB_AUERSWALD=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_BRLVGER=m CONFIG_USB_LCD=m CONFIG_USB_TEST=m CONFIG_USB_GADGET=m CONFIG_USB_NET2280=m CONFIG_USB_ZERO=m CONFIG_USB_ZERO_NET2280=y CONFIG_USB_ETH=m CONFIG_USB_ETH_NET2280=y CONFIG_USB_GADGETFS=m CONFIG_USB_GADGETFS_NET2280=y # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_SUNRPC=m # CONFIG_SUNRPC_GSS is not set CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_SPINLINE is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_INFO is not set # CONFIG_LOCKMETER is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_KGDB is not set # CONFIG_FRAME_POINTER is not set CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_CAPABILITIES is not set CONFIG_SECURITY_ROOTPLUG=m # CONFIG_SECURITY_SELINUX is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_TEST=m # # Library routines # CONFIG_CRC32=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_PC=y # #--------------------------EOF 2.6.1-mm1 .config ---------------------------# #--------------------------BOF 2.6.1-mm4 .config----------------------------# # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y # CONFIG_STANDALONE is not set # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # # Processor support # # # Select all processors your kernel should support # # CONFIG_CPU_386 is not set # CONFIG_CPU_486 is not set CONFIG_CPU_586=y # CONFIG_CPU_586TSC is not set # CONFIG_CPU_586MMX is not set # CONFIG_CPU_686 is not set # CONFIG_CPU_PENTIUMII is not set # CONFIG_CPU_PENTIUMIII is not set # CONFIG_CPU_PENTIUMM is not set # CONFIG_CPU_PENTIUM4 is not set # CONFIG_CPU_K6 is not set # CONFIG_CPU_K7 is not set # CONFIG_CPU_K8 is not set # CONFIG_CPU_CRUSOE is not set # CONFIG_CPU_WINCHIPC6 is not set # CONFIG_CPU_WINCHIP2 is not set # CONFIG_CPU_WINCHIP3D is not set # CONFIG_CPU_CYRIXIII is not set # CONFIG_CPU_VIAC3_2 is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_USE_3DNOW=y # CONFIG_X86_4G is not set # CONFIG_X86_SWITCH_PAGETABLES is not set # CONFIG_X86_4G_VM_LAYOUT is not set # CONFIG_X86_UACCESS_INDIRECT is not set # CONFIG_X86_HIGH_ENTRY is not set # CONFIG_HPET_TIMER is not set # CONFIG_HPET_EMULATE_RTC is not set CONFIG_SMP=y CONFIG_NR_CPUS=8 # CONFIG_SCHED_SMT is not set CONFIG_PREEMPT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y # CONFIG_REGPARM is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set # CONFIG_PM_DISK is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_RELAXED_AML is not set # CONFIG_X86_PM_TIMER is not set # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_USE_VECTOR is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set CONFIG_PCMCIA_PROBE=y # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Device Drivers # # # Generic Driver Options # # CONFIG_FW_LOADER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_LBD=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_MAX_SD_DISKS=256 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_REPORT_LUNS=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX_CONFIG=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA23XX is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # CONFIG_IEEE1394=y # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set # # Device Drivers # # # Texas Instruments PCILynx requires I2C bit-banging # CONFIG_IEEE1394_OHCI1394=y # # Protocol Drivers # # CONFIG_IEEE1394_VIDEO1394 is not set # CONFIG_IEEE1394_SBP2 is not set # CONFIG_IEEE1394_ETH1394 is not set # CONFIG_IEEE1394_DV1394 is not set # CONFIG_IEEE1394_RAWIO is not set # CONFIG_IEEE1394_CMP is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_IPV6 is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_NETFILTER is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set CONFIG_8139_RXBUF_IDX=2 # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # Bluetooth support # # CONFIG_BT is not set # CONFIG_KGDBOE is not set # CONFIG_NETPOLL is not set # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # I2C support # # CONFIG_I2C is not set # # I2C Algorithms # # # I2C Hardware Bus support # # # I2C Hardware Sensors Chip support # # CONFIG_I2C_SENSOR is not set # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set CONFIG_DRM_I830=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # ISA devices # # CONFIG_SND_AD1848 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=y # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VX222 is not set # # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=y # CONFIG_SUNRPC_GSS is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set # CONFIG_LOCKMETER is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_FRAME_POINTER=y CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Library routines # CONFIG_CRC32=y CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_PC=y #-----EOF 2.6.1-mm4 .config--------# eric:/home/bot403 # lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 05) 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03) 00:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3 SCSI Adapter (rev 01) 00:08.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 Ultra3 SCSI Adapter (rev 01) 00:09.0 Ethernet controller: National Semiconductor Corporation DP83820 10/100/1000 Ethernet Controller 00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 05) 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] 02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-768 [Opus] USB (rev 07) 02:04.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 02:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) 02:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) 02:06.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03) 02:06.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03) 02:06.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port > Please send the .config of the last kernel that worked for you. > > > Eric Bambach > > cu > Adrian ------------------------- Eric Bambach Eric at cisu dot net ------------------------- ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-25 4:03 ` Eric @ 2004-01-25 13:15 ` Adrian Bunk 0 siblings, 0 replies; 68+ messages in thread From: Adrian Bunk @ 2004-01-25 13:15 UTC (permalink / raw) To: Eric; +Cc: linux-kernel, Andrew Morton On Sat, Jan 24, 2004 at 10:03:44PM -0600, Eric wrote: >... > I have a strange suspicion that the new cpu options are to blame. I am by no > means a kernel hacker, but I've never had a problem like this where I am > locked out of a whole series of kernels, or where they would stop booting. > Possibly the new CPU selection options are generating bad code with my gcc? >... After diffing two of your .config's, I don't see how the CPU selection options might have caused this. I'm sorry that I don't have a real idea where to search for the problems, only a few thoughts how to get nearer to finding it: Please try 2.6.2-rc1 (without any -mm patch). If this kernel works, please try -mm4 with disabled SMP support and support for the Athlon (and no other CPUs). If you compile with make V=1 the kernel build is more verbose. If this kernel doesn't boot, please send the complete gcc call for the compilation of a file (it doesn't matter which file, e.g. one under fs/). cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-25 1:02 ` Adrian Bunk 2004-01-25 4:03 ` Eric @ 2004-01-25 13:52 ` Fabio Coatti 2004-01-25 14:34 ` Adrian Bunk 1 sibling, 1 reply; 68+ messages in thread From: Fabio Coatti @ 2004-01-25 13:52 UTC (permalink / raw) To: Adrian Bunk; +Cc: Eric, linux-kernel [-- Attachment #1: Type: text/plain, Size: 1163 bytes --] Alle Sunday 25 January 2004 02:02, Adrian Bunk ha scritto: > > Please check exactly between which two kernel versions the problem > first appeared. > > Please send the .config of the last kernel that worked for you. Confirmed here also... the latest working kernel is 2.6.1-mm3; the first non working is 2.6.1-mm4 The symptom is that the booting sequence stops right after "Uncompressing..". I've cofnigured -mm4 using .config and "make oldconfig", answering when needed. The only relevant changed config options are related to CPU, but I haven't looked in configure files. I've attached both .config (working-mm3/not working 2.6.2-rc1-mm3). I'm now trying to compile 2.6.2-rc1-mm3, but the problem is here from 2.6.1-mm4 (not rc). I've also tried several choices for CPU (386->P4), without any change. The system is a P4/HT, chipset i875p, 1Gb ram If more information/test are needed, just let me know. -- Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password. [-- Attachment #2: config-261mm3.gz --] [-- Type: application/x-gzip, Size: 7612 bytes --] [-- Attachment #3: config-262rc1mm4.gz --] [-- Type: application/x-gzip, Size: 7952 bytes --] ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-25 13:52 ` Fabio Coatti @ 2004-01-25 14:34 ` Adrian Bunk 2004-01-25 15:39 ` Fabio Coatti 0 siblings, 1 reply; 68+ messages in thread From: Adrian Bunk @ 2004-01-25 14:34 UTC (permalink / raw) To: Fabio Coatti; +Cc: Eric, linux-kernel On Sun, Jan 25, 2004 at 02:52:58PM +0100, Fabio Coatti wrote: > Alle Sunday 25 January 2004 02:02, Adrian Bunk ha scritto: > > > > > Please check exactly between which two kernel versions the problem > > first appeared. > > > > Please send the .config of the last kernel that worked for you. > > Confirmed here also... > the latest working kernel is 2.6.1-mm3; the first non working is 2.6.1-mm4 > The symptom is that the booting sequence stops right after "Uncompressing..". > I've cofnigured -mm4 using .config and "make oldconfig", answering when > needed. > The only relevant changed config options are related to CPU, but I haven't > looked in configure files. > I've attached both .config (working-mm3/not working 2.6.2-rc1-mm3). > I'm now trying to compile 2.6.2-rc1-mm3, but the problem is here from > 2.6.1-mm4 (not rc). > I've also tried several choices for CPU (386->P4), without any change. > The system is a P4/HT, chipset i875p, 1Gb ram > If more information/test are needed, just let me know. I sent the following to Eric: <-- snip --> After diffing two of your .config's, I don't see how the CPU selection options might have caused this. I'm sorry that I don't have a real idea where to search for the problems, only a few thoughts how to get nearer to finding it: Please try 2.6.2-rc1 (without any -mm patch). If this kernel works, please try -mm4 with disabled SMP support and support for the Athlon (and no other CPUs). If you compile with make V=1 the kernel build is more verbose. If this kernel doesn't boot, please send the complete gcc call for the compilation of a file (it doesn't matter which file, e.g. one under fs/). <-- snip --> The same is true for your .config's, so i you have some spare time these tests would be interesting. TIA Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-25 14:34 ` Adrian Bunk @ 2004-01-25 15:39 ` Fabio Coatti 2004-01-25 16:21 ` Adrian Bunk 2004-01-25 16:28 ` Kernels > 2.6.1-mm3 do not boot Valdis.Kletnieks 0 siblings, 2 replies; 68+ messages in thread From: Fabio Coatti @ 2004-01-25 15:39 UTC (permalink / raw) To: Adrian Bunk; +Cc: Eric, linux-kernel Alle Sunday 25 January 2004 15:34, Adrian Bunk ha scritto: > I sent the following to Eric: [...] sorry, I've seen your mail just few seconds after sending my message; anyway I've tried following your suggestions: > > Please try 2.6.2-rc1 (without any -mm patch). Works just fine. > > If this kernel works, please try -mm4 with disabled SMP support and > support for the Athlon (and no other CPUs). Doesn't work > If you compile with > make V=1 gcc -Wp,-MD,fs/.dcache.o.d -nostdinc -iwithprefix include -D__KERNEL__ -Iinclude -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -pipe -msoft-float -mpreferred-stack-boundary=2 -march=pentium4 -Iinclude/asm-i386/mach-default -O2 -fomit-frame-pointer -funit-at-a-time -DKBUILD_BASENAME=dcache -DKBUILD_MODNAME=dcache -c -o fs/.tmp_dcache.o fs/dcache.c -- Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password. ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-25 15:39 ` Fabio Coatti @ 2004-01-25 16:21 ` Adrian Bunk 2004-01-25 17:11 ` Kernels > 2.6.1-mm3 do not boot. - SOLVED Fabio Coatti 2004-01-25 16:28 ` Kernels > 2.6.1-mm3 do not boot Valdis.Kletnieks 1 sibling, 1 reply; 68+ messages in thread From: Adrian Bunk @ 2004-01-25 16:21 UTC (permalink / raw) To: Fabio Coatti; +Cc: Eric, linux-kernel On Sun, Jan 25, 2004 at 04:39:56PM +0100, Fabio Coatti wrote: >... > > If this kernel works, please try -mm4 with disabled SMP support and > > support for the Athlon (and no other CPUs). > > Doesn't work > > > If you compile with > > make V=1 > > gcc -Wp,-MD,fs/.dcache.o.d -nostdinc -iwithprefix include -D__KERNEL__ > -Iinclude -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs > -fno-strict-aliasing -fno-common -pipe -msoft-float > -mpreferred-stack-boundary=2 -march=pentium4 -Iinclude/asm-i386/mach-default > -O2 -fomit-frame-pointer -funit-at-a-time -DKBUILD_BASENAME=dcache > -DKBUILD_MODNAME=dcache -c -o fs/.tmp_dcache.o fs/dcache.c What's your gcc version ("gcc --version")? Could you back out ("patch -p1 -R < ..." or manually remove the lines) the patch below and retry? TIA Adrian diff -puN Makefile~use-funit-at-a-time Makefile --- 25/Makefile~use-funit-at-a-time 2004-01-14 00:56:05.000000000 -0800 +++ 25-akpm/Makefile 2004-01-14 00:56:05.000000000 -0800 @@ -445,6 +445,10 @@ ifdef CONFIG_DEBUG_INFO CFLAGS += -g endif +# Enable unit-at-a-time mode when possible. It shrinks the +# kernel considerably. +CFLAGS += $(call check_gcc,-funit-at-a-time,) + # warn about C99 declaration after statement CFLAGS += $(call check_gcc,-Wdeclaration-after-statement,) _ ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 16:21 ` Adrian Bunk @ 2004-01-25 17:11 ` Fabio Coatti 2004-01-25 17:30 ` [patch] " Adrian Bunk 0 siblings, 1 reply; 68+ messages in thread From: Fabio Coatti @ 2004-01-25 17:11 UTC (permalink / raw) To: Adrian Bunk; +Cc: Eric, linux-kernel Alle Sunday 25 January 2004 17:21, Adrian Bunk ha scritto: > > What's your gcc version ("gcc --version")? gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk) > > Could you back out ("patch -p1 -R < ..." or manually remove the lines) > the patch below and retry? Yep, and now it works :) Now I'm running 2.6.1-mm4, tested both UP and SMP (SMT) and it boots just fine. Later I'll try with more recents releases, but I'm pretty sure that these will work. Many thanks, the patch has solved this issue :) -- Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password. ^ permalink raw reply [flat|nested] 68+ messages in thread
* [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 17:11 ` Kernels > 2.6.1-mm3 do not boot. - SOLVED Fabio Coatti @ 2004-01-25 17:30 ` Adrian Bunk 2004-01-25 17:48 ` Andi Kleen 2004-01-25 17:49 ` Valdis.Kletnieks 0 siblings, 2 replies; 68+ messages in thread From: Adrian Bunk @ 2004-01-25 17:30 UTC (permalink / raw) To: Fabio Coatti, Andi Kleen, Andrew Morton; +Cc: Eric, linux-kernel On Sun, Jan 25, 2004 at 06:11:27PM +0100, Fabio Coatti wrote: > Alle Sunday 25 January 2004 17:21, Adrian Bunk ha scritto: > > > > > What's your gcc version ("gcc --version")? > > gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk) > > > > > > Could you back out ("patch -p1 -R < ..." or manually remove the lines) > > the patch below and retry? > > Yep, and now it works :) > Now I'm running 2.6.1-mm4, tested both UP and SMP (SMT) and it boots just > fine. Later I'll try with more recents releases, but I'm pretty sure that > these will work. > > Many thanks, the patch has solved this issue :) Many thanks to Eric and you for your help in tracking the problem down! @Andi,Andrew: It seems use-funit-at-a-time breaks with distributions shipping a gcc 3.3 that supports -funit-at-a-time. Th patch below replaces use-funit-at-a-time.patch and uses scripts/gcc-version.sh from add-config-for-mregparm-3-ng* to use -funit-at-a-time only with gcc >= 3.4 . cu Adrian --- linux-2.6.2-rc1-mm3/Makefile.old 2004-01-25 18:22:25.000000000 +0100 +++ linux-2.6.2-rc1-mm3/Makefile 2004-01-25 18:26:56.000000000 +0100 @@ -441,6 +441,15 @@ CFLAGS += -g endif +# Enable unit-at-a-time mode when possible. It shrinks the +# kernel considerably. +# +# Check the gcc version since -funit-at-a-time is available since gcc 3.4, +# but some distributions ship a gcc 3.3 patched with a broken +# -funit-at-a-time implementation +GCC_VERSION = $(shell $(CONFIG_SHELL) scripts/gcc-version.sh $(CC)) +CFLAGS += $(shell if [ $(GCC_VERSION) -ge 0304 ] ; then echo "-funit-at-a-time"; fi ;) + # warn about C99 declaration after statement CFLAGS += $(call check_gcc,-Wdeclaration-after-statement,) ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 17:30 ` [patch] " Adrian Bunk @ 2004-01-25 17:48 ` Andi Kleen 2004-01-25 18:00 ` Valdis.Kletnieks 2004-01-25 21:11 ` Andrew Morton 2004-01-25 17:49 ` Valdis.Kletnieks 1 sibling, 2 replies; 68+ messages in thread From: Andi Kleen @ 2004-01-25 17:48 UTC (permalink / raw) To: Adrian Bunk; +Cc: Fabio Coatti, Andi Kleen, Andrew Morton, Eric, linux-kernel > It seems use-funit-at-a-time breaks with distributions shipping a gcc > 3.3 that supports -funit-at-a-time. It works for me with the hammer branch gcc 3.3 with -funit-at-a-time. Are you sure the exception table sorting patch was properly applied? > Th patch below replaces use-funit-at-a-time.patch and uses > scripts/gcc-version.sh from add-config-for-mregparm-3-ng* to use > -funit-at-a-time only with gcc >= 3.4 . I disagree with that change. -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 17:48 ` Andi Kleen @ 2004-01-25 18:00 ` Valdis.Kletnieks 2004-01-25 19:12 ` Andi Kleen 2004-01-25 21:11 ` Andrew Morton 1 sibling, 1 reply; 68+ messages in thread From: Valdis.Kletnieks @ 2004-01-25 18:00 UTC (permalink / raw) To: Andi Kleen; +Cc: Adrian Bunk, Fabio Coatti, Andrew Morton, Eric, linux-kernel [-- Attachment #1: Type: text/plain, Size: 380 bytes --] On Sun, 25 Jan 2004 18:48:37 +0100, Andi Kleen said: > It works for me with the hammer branch gcc 3.3 with -funit-at-a-time. > Are you sure the exception table sorting patch was properly applied? Was that patch an x86 issue as well, or only on the 64-bit boxes? And if it is a x86 issue, can you repost what *you* think it is (as opposed to what the -mm patch thinks it is?) [-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --] ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 18:00 ` Valdis.Kletnieks @ 2004-01-25 19:12 ` Andi Kleen 2004-01-25 20:21 ` John Stoffel 0 siblings, 1 reply; 68+ messages in thread From: Andi Kleen @ 2004-01-25 19:12 UTC (permalink / raw) To: Valdis.Kletnieks Cc: Andi Kleen, Adrian Bunk, Fabio Coatti, Andrew Morton, Eric, linux-kernel On Sun, Jan 25, 2004 at 01:00:27PM -0500, Valdis.Kletnieks@vt.edu wrote: > On Sun, 25 Jan 2004 18:48:37 +0100, Andi Kleen said: > > > It works for me with the hammer branch gcc 3.3 with -funit-at-a-time. > > > Are you sure the exception table sorting patch was properly applied? > > Was that patch an x86 issue as well, or only on the 64-bit boxes? And if it > is a x86 issue, can you repost what *you* think it is (as opposed to what the -mm > patch thinks it is?) The latest bk tree (post 2.6.2rc1) has a full solution that should cover all architectures. AFAIK there is a known problem on MIPS (not related to the exception tables) If someone is seeing crashes with a BK snapshot from today and -funit-at-a-time please send me the decoded oops. -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 19:12 ` Andi Kleen @ 2004-01-25 20:21 ` John Stoffel 2004-01-25 20:25 ` Andi Kleen 0 siblings, 1 reply; 68+ messages in thread From: John Stoffel @ 2004-01-25 20:21 UTC (permalink / raw) To: Andi Kleen Cc: Valdis.Kletnieks, Adrian Bunk, Fabio Coatti, Andrew Morton, Eric, linux-kernel Andi> The latest bk tree (post 2.6.2rc1) has a full solution that Andi> should cover all architectures. Can you post your patch please? I've been running into this too. I'm compiling 2.6.2-rc1-mm3 right now after having commented out the -funit-at-a-time in Makefile. I'm running gcc 3.3.3 on Debian with the stable/unstable/testing branches. Of course I posted my email before I read the entire rest of the chain of messages on this. Thanks, John ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 20:21 ` John Stoffel @ 2004-01-25 20:25 ` Andi Kleen 2004-01-25 20:37 ` John Stoffel 0 siblings, 1 reply; 68+ messages in thread From: Andi Kleen @ 2004-01-25 20:25 UTC (permalink / raw) To: John Stoffel Cc: Andi Kleen, Valdis.Kletnieks, Adrian Bunk, Fabio Coatti, Andrew Morton, Eric, linux-kernel On Sun, Jan 25, 2004 at 03:21:04PM -0500, John Stoffel wrote: > > Andi> The latest bk tree (post 2.6.2rc1) has a full solution that > Andi> should cover all architectures. > > Can you post your patch please? I've been running into this too. I'm > compiling 2.6.2-rc1-mm3 right now after having commented out the It should be in there already. > -funit-at-a-time in Makefile. I'm running gcc 3.3.3 on Debian with > the stable/unstable/testing branches. Did you actually have problems? -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 20:25 ` Andi Kleen @ 2004-01-25 20:37 ` John Stoffel 2004-01-25 21:45 ` Andi Kleen ` (2 more replies) 0 siblings, 3 replies; 68+ messages in thread From: John Stoffel @ 2004-01-25 20:37 UTC (permalink / raw) To: Andi Kleen Cc: John Stoffel, Valdis.Kletnieks, Adrian Bunk, Fabio Coatti, Andrew Morton, Eric, linux-kernel Andi> On Sun, Jan 25, 2004 at 03:21:04PM -0500, John Stoffel wrote: >> Andi> The latest bk tree (post 2.6.2rc1) has a full solution that Andi> should cover all architectures. >> >> Can you post your patch please? I've been running into this too. I'm >> compiling 2.6.2-rc1-mm3 right now after having commented out the Andi> It should be in there already. It's not in there, since my Makefile had the -funit-at-a-time stuff, which I've now commented out. Still compiling, and waiting to do areboot to test it out. >> -funit-at-a-time in Makefile. I'm running gcc 3.3.3 on Debian with >> the stable/unstable/testing branches. Andi> Did you actually have problems? Sure, the darn thing wouldn't boot, it kept Oopsing with the test_wp_bit oops (that I just posted more details about). More confirmation as I get it. John ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 20:37 ` John Stoffel @ 2004-01-25 21:45 ` Andi Kleen 2004-01-25 21:49 ` Adrian Bunk 2004-01-26 6:00 ` Andrew Morton 2 siblings, 0 replies; 68+ messages in thread From: Andi Kleen @ 2004-01-25 21:45 UTC (permalink / raw) To: John Stoffel Cc: Andi Kleen, Valdis.Kletnieks, Adrian Bunk, Fabio Coatti, Andrew Morton, Eric, linux-kernel On Sun, Jan 25, 2004 at 03:37:20PM -0500, John Stoffel wrote: > > > Andi> On Sun, Jan 25, 2004 at 03:21:04PM -0500, John Stoffel wrote: > >> > Andi> The latest bk tree (post 2.6.2rc1) has a full solution that > Andi> should cover all architectures. > >> > >> Can you post your patch please? I've been running into this too. I'm > >> compiling 2.6.2-rc1-mm3 right now after having commented out the > > Andi> It should be in there already. > > It's not in there, since my Makefile had the -funit-at-a-time stuff, > which I've now commented out. Still compiling, and waiting to do > areboot to test it out. I meant the patch to sort the exception tables, which fixes the only problem I know that unit-at-a-time triggered on i386 > > >> -funit-at-a-time in Makefile. I'm running gcc 3.3.3 on Debian with > >> the stable/unstable/testing branches. > > Andi> Did you actually have problems? > > Sure, the darn thing wouldn't boot, it kept Oopsing with the > test_wp_bit oops (that I just posted more details about). Looks like the sort extable patch was missing. Are you 100% sure you booted the right kernel? 2.6.2-rc1 has Paul Mackerras' generalized sort extable patch already. I just booted an 2.6.2-rc1-mm3 kernel compiled with an -funit-at-a-time capable gcc 3 and it worked just fine. -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 20:37 ` John Stoffel 2004-01-25 21:45 ` Andi Kleen @ 2004-01-25 21:49 ` Adrian Bunk 2004-01-25 23:18 ` John Stoffel 2004-01-26 6:00 ` Andrew Morton 2 siblings, 1 reply; 68+ messages in thread From: Adrian Bunk @ 2004-01-25 21:49 UTC (permalink / raw) To: John Stoffel Cc: Andi Kleen, Valdis.Kletnieks, Fabio Coatti, Andrew Morton, Eric, linux-kernel On Sun, Jan 25, 2004 at 03:37:20PM -0500, John Stoffel wrote: >... > >> -funit-at-a-time in Makefile. I'm running gcc 3.3.3 on Debian with > >> the stable/unstable/testing branches. > > Andi> Did you actually have problems? > > Sure, the darn thing wouldn't boot, it kept Oopsing with the > test_wp_bit oops (that I just posted more details about). > > More confirmation as I get it. I'd say that's a different issue: The gcc 3.3 in debian unstable doesn't know about -funit-at-a-time, and it should therefore not be affected by this problem. > John cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 21:49 ` Adrian Bunk @ 2004-01-25 23:18 ` John Stoffel 2004-01-25 23:47 ` Andi Kleen 0 siblings, 1 reply; 68+ messages in thread From: John Stoffel @ 2004-01-25 23:18 UTC (permalink / raw) To: Adrian Bunk Cc: John Stoffel, Andi Kleen, Valdis.Kletnieks, Fabio Coatti, Andrew Morton, Eric, linux-kernel Adrian> On Sun, Jan 25, 2004 at 03:37:20PM -0500, John Stoffel wrote: >> More confirmation as I get it. Adrian> I'd say that's a different issue: The gcc 3.3 in debian Adrian> unstable doesn't know about -funit-at-a-time, and it should Adrian> therefore not be affected by this problem. It certainly didn't seem to make a difference, after doing a make mrproper and then putting my .config back in place, it still doesn't boot. I'm not doing anything funky in grub, here's my boot options: title 2.6.2-rc1-mm3 root (hd0,0) kernel /vmlinuz-2.6.2-rc1-mm3 root=/dev/sda2 ro savedefault boot I point this out since the last Oops I got on boot said something about kernel_options, but since I didn't write it down, that's not a good report. I'll see about falling back to 2.6.1-mm5 and then to 2.6.2-rc1 and seeing what happens. I could even try going back to 2.6.1 plain as well. Any suggestions? Or any other info I can provide here? John ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 23:18 ` John Stoffel @ 2004-01-25 23:47 ` Andi Kleen 2004-01-26 2:40 ` John Stoffel 2004-01-26 3:23 ` John Stoffel 0 siblings, 2 replies; 68+ messages in thread From: Andi Kleen @ 2004-01-25 23:47 UTC (permalink / raw) To: John Stoffel Cc: Adrian Bunk, Andi Kleen, Valdis.Kletnieks, Fabio Coatti, Andrew Morton, Eric, linux-kernel On Sun, Jan 25, 2004 at 06:18:47PM -0500, John Stoffel wrote: > > Adrian> On Sun, Jan 25, 2004 at 03:37:20PM -0500, John Stoffel wrote: > > >> More confirmation as I get it. > > Adrian> I'd say that's a different issue: The gcc 3.3 in debian > Adrian> unstable doesn't know about -funit-at-a-time, and it should > Adrian> therefore not be affected by this problem. > > It certainly didn't seem to make a difference, after doing a make > mrproper and then putting my .config back in place, it still doesn't > boot. I'm not doing anything funky in grub, here's my boot options: Can you apply the appended patch and boot with earlyprintk=serial (+ serial console with 38400 baud on ttyS0 and a terminal program that does logging on the other side). If you don't have a serial console you can also use earlyprintk=vga , but that would require writing down what's on the screen. What does it say? -Andi diff -u linux-2.6.2rc1mm3/arch/i386/Kconfig-o linux-2.6.2rc1mm3/arch/i386/Kconfig --- linux-2.6.2rc1mm3/arch/i386/Kconfig-o 2004-01-25 22:40:18.000000000 +0100 +++ linux-2.6.2rc1mm3/arch/i386/Kconfig 2004-01-25 23:23:17.282866816 +0100 @@ -1247,6 +1247,10 @@ Say Y here if you are developing drivers or trying to debug and identify kernel problems. +config EARLY_PRINTK + bool + default y + config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL diff -u linux-2.6.2rc1mm3/arch/i386/kernel/setup.c-o linux-2.6.2rc1mm3/arch/i386/kernel/setup.c --- linux-2.6.2rc1mm3/arch/i386/kernel/setup.c-o 2004-01-25 22:40:18.000000000 +0100 +++ linux-2.6.2rc1mm3/arch/i386/kernel/setup.c 2004-01-25 23:59:43.123568520 +0100 @@ -1118,6 +1118,18 @@ #endif paging_init(); +#ifdef CONFIG_EARLY_PRINTK + { + char *s = strstr(*cmdline_p, "earlyprintk="); + if (s) { + extern void setup_early_printk(char *); + setup_early_printk(s+12); + printk("early console should work ....\n"); + } + } +#endif + + dmi_scan_machine(); #ifdef CONFIG_X86_GENERICARCH diff -u linux-2.6.2rc1mm3/arch/i386/kernel/Makefile-o linux-2.6.2rc1mm3/arch/i386/kernel/Makefile --- linux-2.6.2rc1mm3/arch/i386/kernel/Makefile-o 2004-01-25 22:40:18.000000000 +0100 +++ linux-2.6.2rc1mm3/arch/i386/kernel/Makefile 2004-01-25 23:23:19.082593216 +0100 @@ -32,6 +32,9 @@ obj-$(CONFIG_ACPI_SRAT) += srat.o obj-$(CONFIG_HPET_TIMER) += time_hpet.o obj-$(CONFIG_EFI) += efi.o efi_stub.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +early_printk-y := ../../x86_64/kernel/early_printk.o EXTRA_AFLAGS := -traditional diff -u linux-2.6.2rc1mm3/arch/x86_64/kernel/early_printk.c-o linux-2.6.2rc1mm3/arch/x86_64/kernel/early_printk.c --- linux-2.6.2rc1mm3/arch/x86_64/kernel/early_printk.c-o 2003-05-27 03:00:44.000000000 +0200 +++ linux-2.6.2rc1mm3/arch/x86_64/kernel/early_printk.c 2004-01-25 23:25:25.978302136 +0100 @@ -7,7 +7,11 @@ /* Simple VGA output */ +#ifdef __i386__ +#define VGABASE (__PAGE_OFFSET + 0xb8000UL) +#else #define VGABASE 0xffffffff800b8000UL +#endif #define MAX_YPOS 25 #define MAX_XPOS 80 ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 23:47 ` Andi Kleen @ 2004-01-26 2:40 ` John Stoffel 2004-01-26 3:23 ` John Stoffel 1 sibling, 0 replies; 68+ messages in thread From: John Stoffel @ 2004-01-26 2:40 UTC (permalink / raw) To: Andi Kleen Cc: John Stoffel, Adrian Bunk, Valdis.Kletnieks, Fabio Coatti, Andrew Morton, Eric, linux-kernel Andi, I've got the serial cable setu, now I'm compiling 2.6.2-rc1 based on the config from 2.6.1-mm5, which is what I'm running right now. So it looks like my issue is possibly with the new CPU selection stuff in 2.6.2-rc1 and later -mm kernels. Hopefully I'll get this up and running soon. Thanks for your help and the early printk patch. John ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 23:47 ` Andi Kleen 2004-01-26 2:40 ` John Stoffel @ 2004-01-26 3:23 ` John Stoffel 2004-01-26 4:26 ` John Stoffel 2004-01-26 5:04 ` Andi Kleen 1 sibling, 2 replies; 68+ messages in thread From: John Stoffel @ 2004-01-26 3:23 UTC (permalink / raw) To: Andi Kleen Cc: John Stoffel, Adrian Bunk, Valdis.Kletnieks, Fabio Coatti, Andrew Morton, Eric, linux-kernel Andi, I applied the early-printk patch to 2.6.2-rc1 and here's the serial output I got, before the system just stopped booting: Linux version 2.6.2-rc1 (john@jfsnew) (gcc version 3.3.3 20040110 (prerelease) (Debian)) #4 SMP Sun Jan 25 22:13:38 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fffe000 (usable) BIOS-e820: 000000002fffe000 - 0000000030000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 767MB LOWMEM available. found SMP MP-table at 000fe710 hm, page 000fe000 reserved twice. hm, page 000ff000 reserved twice. hm, page 000f0000 reserved twice. On node 0 totalpages: 196606 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192510 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Here's the copied odwn output from tty0, my regular console: Booting '2.6.2-rc1' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinux-2.6.2-rc1 root=sda2 ro console=ttyS0,38400n8 console=tty0 earlyprintk=serial [linux-bzImage, setup=0xa00, size=0x1d3b38] savedefault boot Uncompressing Linux... Ok, booting the kernel. And that's it. I'll see about applying the patch to the various 2.6.2-rc1-mm kernels as well, and possibly to 2.6.2-rc2, which I just got downloaded. Hmmm... I'll try that one first actually and try to get more info out tonight. John ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 3:23 ` John Stoffel @ 2004-01-26 4:26 ` John Stoffel 2004-01-26 5:04 ` Andi Kleen 1 sibling, 0 replies; 68+ messages in thread From: John Stoffel @ 2004-01-26 4:26 UTC (permalink / raw) To: John Stoffel Cc: Andi Kleen, Adrian Bunk, Valdis.Kletnieks, Fabio Coatti, Andrew Morton, Eric, linux-kernel Just a quick followup, but 2.6.2-rc2 also hung in the exact same spot, after printing out the HighMem zone: line. Falling back to 2.6.1-mm5 for now. More testing tomorrow evening when I get a chance. John ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 3:23 ` John Stoffel 2004-01-26 4:26 ` John Stoffel @ 2004-01-26 5:04 ` Andi Kleen 2004-01-26 14:14 ` John Stoffel 1 sibling, 1 reply; 68+ messages in thread From: Andi Kleen @ 2004-01-26 5:04 UTC (permalink / raw) To: John Stoffel Cc: Andi Kleen, Adrian Bunk, Valdis.Kletnieks, Fabio Coatti, Andrew Morton, Eric, linux-kernel > On node 0 totalpages: 196606 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 192510 pages, LIFO batch:16 > HighMem zone: 0 pages, LIFO batch:1 Ok, it didn't oops. Just hung early. Probably needs some printks to track it down. And the problem really goes away when you disable -funit-at-a-time ? -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 5:04 ` Andi Kleen @ 2004-01-26 14:14 ` John Stoffel 2004-01-26 14:36 ` Andi Kleen 0 siblings, 1 reply; 68+ messages in thread From: John Stoffel @ 2004-01-26 14:14 UTC (permalink / raw) To: Andi Kleen Cc: John Stoffel, Adrian Bunk, Valdis.Kletnieks, Fabio Coatti, Andrew Morton, Eric, linux-kernel >> On node 0 totalpages: 196606 >> DMA zone: 4096 pages, LIFO batch:1 >> Normal zone: 192510 pages, LIFO batch:16 >> HighMem zone: 0 pages, LIFO batch:1 Andi> Ok, it didn't oops. Just hung early. Probably needs some printks Andi> to track it down. Andi> And the problem really goes away when you disable -funit-at-a-time ? This was from both 2.6.2-rc1 and 2.6.2-rc2, and since the later doesn't have the -funit-at-time declaration in the Makefile, I don't think that's the problem. My gcc version is: > gcc --version gcc.real (GCC) 3.3.3 20040110 (prerelease) (Debian) John ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 14:14 ` John Stoffel @ 2004-01-26 14:36 ` Andi Kleen 0 siblings, 0 replies; 68+ messages in thread From: Andi Kleen @ 2004-01-26 14:36 UTC (permalink / raw) To: John Stoffel Cc: Andi Kleen, Adrian Bunk, Valdis.Kletnieks, Fabio Coatti, Andrew Morton, Eric, linux-kernel On Mon, Jan 26, 2004 at 09:14:36AM -0500, John Stoffel wrote: > > >> On node 0 totalpages: 196606 > >> DMA zone: 4096 pages, LIFO batch:1 > >> Normal zone: 192510 pages, LIFO batch:16 > >> HighMem zone: 0 pages, LIFO batch:1 > > Andi> Ok, it didn't oops. Just hung early. Probably needs some printks > Andi> to track it down. > > Andi> And the problem really goes away when you disable -funit-at-a-time ? > > This was from both 2.6.2-rc1 and 2.6.2-rc2, and since the later > doesn't have the -funit-at-time declaration in the Makefile, I don't > think that's the problem. > > My gcc version is: > > > gcc --version > gcc.real (GCC) 3.3.3 20040110 (prerelease) (Debian) Well, you have some different problem then. I was assuming you used -funit-at-a-time because you posted on the unit-at-a-time thread. I don't know what's wrong with your kernel, sorry. If it happened to me here I would add printks to the early kernel initialisation until I figured out where it hangs. (it's somewhere after mem_init and before console_init in init/main.c:start_kernel). You could try that, together with earlyprintk. -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 20:37 ` John Stoffel 2004-01-25 21:45 ` Andi Kleen 2004-01-25 21:49 ` Adrian Bunk @ 2004-01-26 6:00 ` Andrew Morton 2004-01-26 6:09 ` Andi Kleen ` (3 more replies) 2 siblings, 4 replies; 68+ messages in thread From: Andrew Morton @ 2004-01-26 6:00 UTC (permalink / raw) To: John Stoffel Cc: ak, stoffel, Valdis.Kletnieks, bunk, cova, eric, linux-kernel "John Stoffel" <stoffel@lucent.com> wrote: > > Sure, the darn thing wouldn't boot, it kept Oopsing with the > test_wp_bit oops (that I just posted more details about). Does this fix the test_wp_bit oops? --- 25/init/main.c~test_wp_bit-oops-fix 2004-01-25 15:29:53.000000000 -0800 +++ 25-akpm/init/main.c 2004-01-25 15:30:03.000000000 -0800 @@ -434,9 +434,9 @@ asmlinkage void __init start_kernel(void } #endif page_address_init(); + sort_main_extable(); mem_init(); kmem_cache_init(); - sort_main_extable(); if (late_time_init) late_time_init(); calibrate_delay(); _ ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 6:00 ` Andrew Morton @ 2004-01-26 6:09 ` Andi Kleen 2004-01-26 14:12 ` John Stoffel 2004-01-26 19:26 ` Eric ` (2 subsequent siblings) 3 siblings, 1 reply; 68+ messages in thread From: Andi Kleen @ 2004-01-26 6:09 UTC (permalink / raw) To: Andrew Morton Cc: John Stoffel, ak, Valdis.Kletnieks, bunk, cova, eric, linux-kernel On Sun, Jan 25, 2004 at 10:00:27PM -0800, Andrew Morton wrote: > "John Stoffel" <stoffel@lucent.com> wrote: > > > > Sure, the darn thing wouldn't boot, it kept Oopsing with the > > test_wp_bit oops (that I just posted more details about). > > Does this fix the test_wp_bit oops? He apparently doesn't have an test_wp_bit oops, but just an hang very early (after mem_init according to early printk) -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 6:09 ` Andi Kleen @ 2004-01-26 14:12 ` John Stoffel 2004-01-26 14:51 ` Fabio Coatti 0 siblings, 1 reply; 68+ messages in thread From: John Stoffel @ 2004-01-26 14:12 UTC (permalink / raw) To: Andi Kleen Cc: Andrew Morton, John Stoffel, Valdis.Kletnieks, bunk, cova, eric, linux-kernel Andi> On Sun, Jan 25, 2004 at 10:00:27PM -0800, Andrew Morton wrote: >> "John Stoffel" <stoffel@lucent.com> wrote: >> > >> > Sure, the darn thing wouldn't boot, it kept Oopsing with the >> > test_wp_bit oops (that I just posted more details about). >> >> Does this fix the test_wp_bit oops? Andi> He apparently doesn't have an test_wp_bit oops, but just an hang Andi> very early (after mem_init according to early printk) Just to follow up here. On kernels 2.6.2-rc1 and 2.6.2-rc2, it just hangs on bootup and doesn't give any Oops output. When I tried out 2.6.2-rc1-mm[1,2,3], it would start booting, but oops immediately with the one I posted before, but I've re-created here. I'm at work now, so I won't be able to do any tests besides remote kernel compiles during the day. My plan is to apply the patch from Andrew where sort_main_extable() is moved up above mem_init() to both 2.6.2-rc2 and to 2.6.2-rc1-mm3 and see what happens. Here's my .config for 2.6.2-rc1-mm3: # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_STANDALONE=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # # Processor support # # # Select all processors your kernel should support # # CONFIG_CPU_386 is not set CONFIG_CPU_486=y CONFIG_CPU_586=y CONFIG_CPU_586TSC=y CONFIG_CPU_586MMX=y CONFIG_CPU_686=y CONFIG_CPU_PENTIUMII=y CONFIG_CPU_PENTIUMIII=y # CONFIG_CPU_PENTIUMM is not set # CONFIG_CPU_PENTIUM4 is not set # CONFIG_CPU_K6 is not set # CONFIG_CPU_K7 is not set # CONFIG_CPU_K8 is not set # CONFIG_CPU_CRUSOE is not set # CONFIG_CPU_WINCHIPC6 is not set # CONFIG_CPU_WINCHIP2 is not set # CONFIG_CPU_WINCHIP3D is not set # CONFIG_CPU_CYRIXIII is not set # CONFIG_CPU_VIAC3_2 is not set CONFIG_CPU_INTEL=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_PPRO_FENCE=y CONFIG_X86_F00F_BUG=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_BAD_APIC=y CONFIG_X86_INTEL_USERCOPY=y # CONFIG_X86_4G is not set # CONFIG_X86_SWITCH_PAGETABLES is not set # CONFIG_X86_4G_VM_LAYOUT is not set # CONFIG_X86_UACCESS_INDIRECT is not set # CONFIG_X86_HIGH_ENTRY is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_SMP=y CONFIG_NR_CPUS=8 # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_MCE is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_MATH_EMULATION=y CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y # CONFIG_REGPARM is not set # # Power management options (ACPI, APM) # # CONFIG_PM is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_ASUS=m CONFIG_ACPI_TOSHIBA=m CONFIG_ACPI_DEBUG=y CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_RELAXED_AML is not set # CONFIG_X86_PM_TIMER is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_USE_VECTOR is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set CONFIG_PCMCIA_PROBE=y # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Device Drivers # # # Generic Driver Options # # CONFIG_FW_LOADER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play support # CONFIG_PNP=y CONFIG_PNP_DEBUG=y # # Protocols # CONFIG_ISAPNP=y CONFIG_PNPBIOS=y # CONFIG_PNPBIOS_PROC_FS is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set CONFIG_LBD=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # CONFIG_IDE_TASKFILE_IO is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_MAX_SD_DISKS=16 CONFIG_CHR_DEV_ST=y # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_REPORT_LUNS=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX_CONFIG=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA23XX is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y # CONFIG_MD_RAID6 is not set # CONFIG_MD_MULTIPATH is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_IOCTL_V4 is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set CONFIG_IEEE1394_OUI_DB=y # # Device Drivers # # # Texas Instruments PCILynx requires I2C # CONFIG_IEEE1394_OHCI1394=m # # Protocol Drivers # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m CONFIG_IEEE1394_CMP=m # CONFIG_IEEE1394_AMDTP is not set # # I2O device support # # CONFIG_I2O is not set # # Macintosh device drivers # # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_IPV6 is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_NETFILTER is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # Bluetooth support # # CONFIG_BT is not set # CONFIG_KGDBOE is not set # CONFIG_NETPOLL is not set # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_UINPUT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set CONFIG_CYCLADES=y # CONFIG_CYZ_INTR is not set # CONFIG_DIGIEPCA is not set # CONFIG_DIGI is not set # CONFIG_ESPSERIAL is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # Mice # CONFIG_BUSMOUSE=y # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # I2C support # # CONFIG_I2C is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y CONFIG_SND_DEBUG_MEMORY=y CONFIG_SND_DEBUG_DETECT=y # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # ISA devices # # CONFIG_SND_AD1816A is not set # CONFIG_SND_AD1848 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES968 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_ALS100 is not set # CONFIG_SND_AZT2320 is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_DT019X is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set CONFIG_SND_ENS1371=m # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VX222 is not set # # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m # CONFIG_USB_UHCI_HCD is not set # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_HP8200e is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # # USB Human Interface Devices (HID) # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set CONFIG_USB_SCANNER=m # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V4 is not set CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=y # CONFIG_SUNRPC_GSS is not set CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_NEC98_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_IOVIRT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_PAGEALLOC=y # CONFIG_SPINLINE is not set CONFIG_DEBUG_INFO=y # CONFIG_LOCKMETER is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_KGDB is not set CONFIG_FRAME_POINTER=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Library routines # CONFIG_CRC32=y CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_PC=y ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 14:12 ` John Stoffel @ 2004-01-26 14:51 ` Fabio Coatti 0 siblings, 0 replies; 68+ messages in thread From: Fabio Coatti @ 2004-01-26 14:51 UTC (permalink / raw) To: John Stoffel Cc: Andi Kleen, Andrew Morton, Valdis.Kletnieks, bunk, eric, linux-kernel Alle Monday 26 January 2004 15:12, John Stoffel ha scritto: > > Just to follow up here. On kernels 2.6.2-rc1 and 2.6.2-rc2, it just > hangs on bootup and doesn't give any Oops output. > > When I tried out 2.6.2-rc1-mm[1,2,3], it would start booting, but > oops immediately with the one I posted before, but I've re-created > here. It seems a little bit different from my situation: 2.6.2-rcX (basically non -mm versions) boots and works just fine (besides some oopses on shutdown, but this is another story, I'll investigate further on this). -mm series, both 2.6.2-rcX-mmY and 2.6.1-mmZ with Z > 3 hangs after decompressing image, if I leave -funit-at-time in Makefile. I can redo any of these tests, I can also use a serial interface to capture any "hidden" oops, if someone sends me any needed patch to show some data (i.e. early printk) and the desired tests. > > I'm at work now, so I won't be able to do any tests besides remote > kernel compiles during the day. The same holds for me :) -- Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password. ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 6:00 ` Andrew Morton 2004-01-26 6:09 ` Andi Kleen @ 2004-01-26 19:26 ` Eric 2004-01-26 19:56 ` Andrew Morton 2004-01-27 0:18 ` 2.6.2-rc2 Hangs on boot (was: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED) John Stoffel 2004-01-27 9:40 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED Erik Hensema 3 siblings, 1 reply; 68+ messages in thread From: Eric @ 2004-01-26 19:26 UTC (permalink / raw) To: Andrew Morton, John Stoffel Cc: ak, Valdis.Kletnieks, bunk, cova, linux-kernel On Monday 26 January 2004 00:00, Andrew Morton wrote: > "John Stoffel" <stoffel@lucent.com> wrote: > > Sure, the darn thing wouldn't boot, it kept Oopsing with the > > test_wp_bit oops (that I just posted more details about). > > Does this fix the test_wp_bit oops? Yes, it fixes my test_wp_bit oops. But NOW, when booting 2.6.2-rc1-mm3 (which i pathed removing -funit-at-a-time and the wp_but oops patch) I get an oops derefrencing null pointer in blkdev_reread_part. I booted normal and with vga=ask acpi=off Here is a close approxamation of what I wrote down by hand. raid1: raid set md1 active..(blah blah) Unable to handle null dereference at virtual address 0000008c025b893 *pde = 00000000 oops = 0000 [#1] PREEMPT SMP CPU: 0 EIP: 0060 Not Tainted VLI EIP is at blkdev_reread_part+0x13/0x80 Trace [<c025bdfe>] blkdev_ioctl+0x30e/0x3b5 [<co17f426>] wake_up_inode+0x6/0x30 (might be 0xb.. cant read my writing) [<co1bb696>] io_ctl_by_bdev+0x26/0x40 [<c0307e53>] do_md_run+0x493/0x5c0 .....trace continues about 20-30 functions Let me know if you need more (or more accurate) debugging info. I am very sorry if I have copied something down incorrectly. If I have, I guess its a great time to learn how to set a up serial console :) ------------------------- Eric Bambach Eric at cisu dot net ------------------------- ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 19:26 ` Eric @ 2004-01-26 19:56 ` Andrew Morton 2004-01-27 5:43 ` Eric 0 siblings, 1 reply; 68+ messages in thread From: Andrew Morton @ 2004-01-26 19:56 UTC (permalink / raw) To: Eric; +Cc: stoffel, ak, Valdis.Kletnieks, bunk, cova, linux-kernel Eric <eric@cisu.net> wrote: > > On Monday 26 January 2004 00:00, Andrew Morton wrote: > > "John Stoffel" <stoffel@lucent.com> wrote: > > > Sure, the darn thing wouldn't boot, it kept Oopsing with the > > > test_wp_bit oops (that I just posted more details about). > > > > Does this fix the test_wp_bit oops? > > Yes, it fixes my test_wp_bit oops. But NOW, when booting 2.6.2-rc1-mm3 (which > i pathed removing -funit-at-a-time and the wp_but oops patch) I get an oops > derefrencing null pointer in blkdev_reread_part. It is likely that this can be fixed by reverting ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.2-rc1/2.6.2-rc1-mm3/broken-out/md-06-allow-partitioning.patch ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 19:56 ` Andrew Morton @ 2004-01-27 5:43 ` Eric 2004-01-27 5:50 ` Andrew Morton 0 siblings, 1 reply; 68+ messages in thread From: Eric @ 2004-01-27 5:43 UTC (permalink / raw) To: Andrew Morton; +Cc: stoffel, ak, Valdis.Kletnieks, bunk, cova, linux-kernel On Monday 26 January 2004 13:56, Andrew Morton wrote: > Eric <eric@cisu.net> wrote: > > On Monday 26 January 2004 00:00, Andrew Morton wrote: > > > "John Stoffel" <stoffel@lucent.com> wrote: > > > > Sure, the darn thing wouldn't boot, it kept Oopsing with the > > > > test_wp_bit oops (that I just posted more details about). > > > > > > Does this fix the test_wp_bit oops? > > > > Yes, it fixes my test_wp_bit oops. But NOW, when booting 2.6.2-rc1-mm3 > > (which i pathed removing -funit-at-a-time and the wp_but oops patch) I > > get an oops derefrencing null pointer in blkdev_reread_part. > > It is likely that this can be fixed by reverting > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.2-rc1/2. >6.2-rc1-mm3/broken-out/md-06-allow-partitioning.patch - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ YES. I finally have a working 2.6.2-rc1-mm3 booted kernel. Lets review folks--- reverted -funit-at-a-time patched test_wp_bit so exception tables are sorted sooner reverted md-partition patch Thank you very much for your help. I hope we all learned something today. I definatly did. ------------------------- Eric Bambach Eric at cisu dot net ------------------------- ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-27 5:43 ` Eric @ 2004-01-27 5:50 ` Andrew Morton 2004-01-27 5:57 ` Eric ` (2 more replies) 0 siblings, 3 replies; 68+ messages in thread From: Andrew Morton @ 2004-01-27 5:50 UTC (permalink / raw) To: Eric; +Cc: stoffel, ak, Valdis.Kletnieks, bunk, cova, linux-kernel Eric <eric@cisu.net> wrote: > > YES. I finally have a working 2.6.2-rc1-mm3 booted kernel. > Lets review folks--- > reverted -funit-at-a-time > patched test_wp_bit so exception tables are sorted sooner > reverted md-partition patch The latter two are understood, but the `-funit-at-a-time' problem is not. Can you plesae confirm that restoring only -funit-at-a-time again produces a crashy kernel? And that you are using a flavour of gcc-3.3? If so, I guess we'll need to only enable it for gcc-3.4 and later. ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-27 5:50 ` Andrew Morton @ 2004-01-27 5:57 ` Eric 2004-01-27 6:37 ` Eric 2004-01-27 16:20 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED Andi Kleen 2 siblings, 0 replies; 68+ messages in thread From: Eric @ 2004-01-27 5:57 UTC (permalink / raw) To: Andrew Morton; +Cc: stoffel, ak, Valdis.Kletnieks, bunk, cova, linux-kernel On Monday 26 January 2004 23:50, Andrew Morton wrote: > Eric <eric@cisu.net> wrote: > > YES. I finally have a working 2.6.2-rc1-mm3 booted kernel. > > Lets review folks--- > > reverted -funit-at-a-time > > patched test_wp_bit so exception tables are sorted sooner > > reverted md-partition patch > > The latter two are understood, but the `-funit-at-a-time' problem is not. > > Can you plesae confirm that restoring only -funit-at-a-time again produces > a crashy kernel? And that you are using a flavour of gcc-3.3? If so, I > guess we'll need to only enable it for gcc-3.4 and later. Yea ill try it right now. Ill get back to you in about half hour, probably less. Would you like me to send you a complied kernel or some files that my compiler has generated if its still crashy? I remember reading somewhere on lkml about another problem that hung RIGHT on boot and it was related to GCC producing an invalid instruction for that particular processor. This smells of badly generated code. Heres a recap of my GCC: SuSE Linux 8.2 eric:/usr/src/linux-2.6.2-rc1-mm3/linux-2.6.1 # gcc -v Reading specs from /usr/lib/gcc-lib/i486-suse-linux/3.3/specs Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --libdir=/usr/lib --enable-languages=c,c++,f77,objc,java,ada --disable-checking --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib --with-system-zlib --enable-shared --enable-__cxa_atexit i486-suse-linux Thread model: posix gcc version 3.3 20030226 (prerelease) (SuSE Linux) ------------------------- Eric Bambach Eric at cisu dot net ------------------------- ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-27 5:50 ` Andrew Morton 2004-01-27 5:57 ` Eric @ 2004-01-27 6:37 ` Eric 2004-01-27 16:26 ` Andi Kleen 2004-01-27 18:15 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - REALLY SOLVED Andi Kleen 2004-01-27 16:20 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED Andi Kleen 2 siblings, 2 replies; 68+ messages in thread From: Eric @ 2004-01-27 6:37 UTC (permalink / raw) To: Andrew Morton; +Cc: stoffel, ak, Valdis.Kletnieks, bunk, cova, linux-kernel On Monday 26 January 2004 23:50, Andrew Morton wrote: > Eric <eric@cisu.net> wrote: > > YES. I finally have a working 2.6.2-rc1-mm3 booted kernel. > > Lets review folks--- > > reverted -funit-at-a-time > > patched test_wp_bit so exception tables are sorted sooner > > reverted md-partition patch > > The latter two are understood, but the `-funit-at-a-time' problem is not. > > Can you plesae confirm that restoring only -funit-at-a-time again produces > a crashy kernel? And that you are using a flavour of gcc-3.3? If so, I > guess we'll need to only enable it for gcc-3.4 and later. > Yes, confirmed. My version of gcc, I just sent you adding the -funit-at-a-time hung after uncompressing the kernel. I booted a secondary kernel, recompiled without it and all was fine again. Confirmed non-boot for 2.6.2-rc1-mm3 but without a doubt for all kernels previous where -funit-at-a-time is active in the makefile. ------------------------- Eric Bambach Eric at cisu dot net ------------------------- ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-27 6:37 ` Eric @ 2004-01-27 16:26 ` Andi Kleen 2004-01-27 18:15 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - REALLY SOLVED Andi Kleen 1 sibling, 0 replies; 68+ messages in thread From: Andi Kleen @ 2004-01-27 16:26 UTC (permalink / raw) To: Eric; +Cc: Andrew Morton, stoffel, ak, Valdis.Kletnieks, bunk, cova, linux-kernel On Tue, Jan 27, 2004 at 12:37:43AM -0600, Eric wrote: > On Monday 26 January 2004 23:50, Andrew Morton wrote: > > Eric <eric@cisu.net> wrote: > > > YES. I finally have a working 2.6.2-rc1-mm3 booted kernel. > > > Lets review folks--- > > > reverted -funit-at-a-time > > > patched test_wp_bit so exception tables are sorted sooner > > > reverted md-partition patch > > > > The latter two are understood, but the `-funit-at-a-time' problem is not. > > > > Can you plesae confirm that restoring only -funit-at-a-time again produces > > a crashy kernel? And that you are using a flavour of gcc-3.3? If so, I > > guess we'll need to only enable it for gcc-3.4 and later. > > > Yes, confirmed. My version of gcc, I just sent you adding the > -funit-at-a-time hung after uncompressing the kernel. I booted a secondary > kernel, recompiled without it and all was fine again. Confirmed non-boot for > 2.6.2-rc1-mm3 but without a doubt for all kernels previous where > -funit-at-a-time is active in the makefile. Ok thanks for the confimration. I will try to reproduce this with the SuSE 8.2 compiler and track it down. -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - REALLY SOLVED 2004-01-27 6:37 ` Eric 2004-01-27 16:26 ` Andi Kleen @ 2004-01-27 18:15 ` Andi Kleen 2004-01-27 19:31 ` Eric 2004-01-27 21:09 ` Fabio Coatti 1 sibling, 2 replies; 68+ messages in thread From: Andi Kleen @ 2004-01-27 18:15 UTC (permalink / raw) To: Eric; +Cc: Andrew Morton, stoffel, ak, Valdis.Kletnieks, bunk, cova, linux-kernel On Tue, Jan 27, 2004 at 12:37:43AM -0600, Eric wrote: > On Monday 26 January 2004 23:50, Andrew Morton wrote: > > Eric <eric@cisu.net> wrote: > > > YES. I finally have a working 2.6.2-rc1-mm3 booted kernel. > > > Lets review folks--- > > > reverted -funit-at-a-time > > > patched test_wp_bit so exception tables are sorted sooner > > > reverted md-partition patch > > > > The latter two are understood, but the `-funit-at-a-time' problem is not. > > > > Can you plesae confirm that restoring only -funit-at-a-time again produces > > a crashy kernel? And that you are using a flavour of gcc-3.3? If so, I > > guess we'll need to only enable it for gcc-3.4 and later. > > > Yes, confirmed. My version of gcc, I just sent you adding the > -funit-at-a-time hung after uncompressing the kernel. I booted a secondary > kernel, recompiled without it and all was fine again. Confirmed non-boot for > 2.6.2-rc1-mm3 but without a doubt for all kernels previous where > -funit-at-a-time is active in the makefile. Ok, found it. This patch should fix it. The top level asm in process.c assumed that the section was .text, but that is not guaranteed in a funit-at-a-time compiler. It ended up in the setup section and messed up the argument parsing. This bug could have hit with any compiler, it was just plain luck that it worked with newer gcc 3.3 and 3.4. Please test if it fixes your problem. Andrew, please merge it if the bug is confirmed to be fixed. -Andi diff -u linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c-o linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c --- linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c-o 2004-01-27 02:26:39.000000000 +0100 +++ linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c 2004-01-27 19:09:41.131460832 +0100 @@ -253,13 +253,15 @@ * the "args". */ extern void kernel_thread_helper(void); -__asm__(".align 4\n" +__asm__(".section .text\n" + ".align 4\n" "kernel_thread_helper:\n\t" "movl %edx,%eax\n\t" "pushl %edx\n\t" "call *%ebx\n\t" "pushl %eax\n\t" - "call do_exit"); + "call do_exit\n" + ".previous"); /* * Create a kernel thread ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - REALLY SOLVED 2004-01-27 18:15 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - REALLY SOLVED Andi Kleen @ 2004-01-27 19:31 ` Eric 2004-01-27 21:09 ` Fabio Coatti 1 sibling, 0 replies; 68+ messages in thread From: Eric @ 2004-01-27 19:31 UTC (permalink / raw) To: Andi Kleen Cc: Andrew Morton, stoffel, Valdis.Kletnieks, bunk, cova, linux-kernel On Tuesday 27 January 2004 12:15, Andi Kleen wrote: > On Tue, Jan 27, 2004 at 12:37:43AM -0600, Eric wrote: > > On Monday 26 January 2004 23:50, Andrew Morton wrote: > > > Eric <eric@cisu.net> wrote: > > > > YES. I finally have a working 2.6.2-rc1-mm3 booted kernel. > > > > Lets review folks--- > > > > reverted -funit-at-a-time > > > > patched test_wp_bit so exception tables are sorted sooner > > > > reverted md-partition patch > > > > > > The latter two are understood, but the `-funit-at-a-time' problem is > > > not. > > > > > > Can you plesae confirm that restoring only -funit-at-a-time again > > > produces a crashy kernel? And that you are using a flavour of gcc-3.3? > > > If so, I guess we'll need to only enable it for gcc-3.4 and later. > > > > Yes, confirmed. My version of gcc, I just sent you adding the > > -funit-at-a-time hung after uncompressing the kernel. I booted a > > secondary kernel, recompiled without it and all was fine again. Confirmed > > non-boot for 2.6.2-rc1-mm3 but without a doubt for all kernels previous > > where -funit-at-a-time is active in the makefile. > > Ok, found it. This patch should fix it. The top level asm in process.c > assumed that the section was .text, but that is not guaranteed in a > funit-at-a-time compiler. It ended up in the setup section and messed up > the argument parsing. This bug could have hit with any compiler, > it was just plain luck that it worked with newer gcc 3.3 and 3.4. > > Please test if it fixes your problem. Yes. Confirmed. Lets review again. -removed -funit from makefile patched to fix exception table sorting reverted md-partition-patch BOOTS add -funit again FAILS leave -funit active in makefile patch with patch below BOOTS This patch is confirmed to fix the boot with -funit-at-a-time with 2.6.2-rc1-mm2 with gcc(below) Thanks so much for everyones attention in the matter. bot403@eric:~> gcc -v Reading specs from /usr/lib/gcc-lib/i486-suse-linux/3.3/specs Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --libdir=/usr/lib --enable-languages=c,c++,f77,objc,java,ada --disable-checking --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib --with-system-zlib --enable-shared --enable-__cxa_atexit i486-suse-linux Thread model: posix gcc version 3.3 20030226 (prerelease) (SuSE Linux) > Andrew, please merge it if the bug is confirmed to be fixed. > > -Andi > > diff -u linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c-o > linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c --- > linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c-o 2004-01-27 > 02:26:39.000000000 +0100 +++ > linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c 2004-01-27 > 19:09:41.131460832 +0100 @@ -253,13 +253,15 @@ > * the "args". > */ > extern void kernel_thread_helper(void); > -__asm__(".align 4\n" > +__asm__(".section .text\n" > + ".align 4\n" > "kernel_thread_helper:\n\t" > "movl %edx,%eax\n\t" > "pushl %edx\n\t" > "call *%ebx\n\t" > "pushl %eax\n\t" > - "call do_exit"); > + "call do_exit\n" > + ".previous"); > > /* > * Create a kernel thread ------------------------- Eric Bambach Eric at cisu dot net ------------------------- ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - REALLY SOLVED 2004-01-27 18:15 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - REALLY SOLVED Andi Kleen 2004-01-27 19:31 ` Eric @ 2004-01-27 21:09 ` Fabio Coatti 1 sibling, 0 replies; 68+ messages in thread From: Fabio Coatti @ 2004-01-27 21:09 UTC (permalink / raw) To: Andi Kleen Cc: Eric, Andrew Morton, stoffel, Valdis.Kletnieks, bunk, linux-kernel Alle Tuesday 27 January 2004 19:15, Andi Kleen ha scritto: > Ok, found it. This patch should fix it. The top level asm in process.c > assumed that the section was .text, but that is not guaranteed in a > funit-at-a-time compiler. It ended up in the setup section and messed up > the argument parsing. This bug could have hit with any compiler, > it was just plain luck that it worked with newer gcc 3.3 and 3.4. Confirmed here. 2.6.2-rc1-mm3 boots just fine with this patch; without patch it hangs just as described before. (-funit-at-a-time enabled, of course). Many thanks to all. -- Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password. ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-27 5:50 ` Andrew Morton 2004-01-27 5:57 ` Eric 2004-01-27 6:37 ` Eric @ 2004-01-27 16:20 ` Andi Kleen 2004-01-27 20:54 ` Andrew Morton 2 siblings, 1 reply; 68+ messages in thread From: Andi Kleen @ 2004-01-27 16:20 UTC (permalink / raw) To: Andrew Morton Cc: Eric, stoffel, ak, Valdis.Kletnieks, bunk, cova, linux-kernel > Can you plesae confirm that restoring only -funit-at-a-time again produces > a crashy kernel? And that you are using a flavour of gcc-3.3? If so, I It works just fine on the SuSE 9.0 3.3-hammer gcc. So far the reports point to some Mandrake gcc 3.3 having problems (they used an older version of Hammer branch). It's hard to be sure because everybody having any problem with the kernel seems to like to report it to this thread :-) But before just disabling it I would like to track down the problem and see if it's really a compiler issue or something that can be fixed in the kernel. If you really want to disable it I would prefer to only check for that compiler version and keep it for working 3.3-hammers. -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-27 16:20 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED Andi Kleen @ 2004-01-27 20:54 ` Andrew Morton 2004-01-27 22:30 ` Andi Kleen 0 siblings, 1 reply; 68+ messages in thread From: Andrew Morton @ 2004-01-27 20:54 UTC (permalink / raw) To: Andi Kleen; +Cc: eric, stoffel, ak, Valdis.Kletnieks, bunk, cova, linux-kernel Andi Kleen <ak@muc.de> wrote: > > > Can you plesae confirm that restoring only -funit-at-a-time again produces > > a crashy kernel? And that you are using a flavour of gcc-3.3? If so, I > > It works just fine on the SuSE 9.0 3.3-hammer gcc. > > So far the reports point to some Mandrake gcc 3.3 having problems > (they used an older version of Hammer branch). It's hard to be sure > because everybody having any problem with the kernel seems to like > to report it to this thread :-) But before just disabling > it I would like to track down the problem and see if it's really a > compiler issue or something that can be fixed in the kernel. > > If you really want to disable it I would prefer to only check for that > compiler version and keep it for working 3.3-hammers. I've moved the enabling of -funit-at-a-time out of Makefile and down into arch/i386/Makefile, and I changed to require gcc-3.4 or higher. So if you want to use -funit-at-a-time on gcc-3.3/hammer you can do so. ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-27 20:54 ` Andrew Morton @ 2004-01-27 22:30 ` Andi Kleen 2004-01-27 23:16 ` Andrew Morton 0 siblings, 1 reply; 68+ messages in thread From: Andi Kleen @ 2004-01-27 22:30 UTC (permalink / raw) To: Andrew Morton Cc: Andi Kleen, eric, stoffel, Valdis.Kletnieks, bunk, cova, linux-kernel > I've moved the enabling of -funit-at-a-time out of Makefile and down into > arch/i386/Makefile, and I changed to require gcc-3.4 or higher. > > So if you want to use -funit-at-a-time on gcc-3.3/hammer you can do so. Please undo that and apply this patch instead. It fixes the bug that broke booting with older gcc 3.3-hammer compilers (confirmed by two people on l-k). It was plain luck that it worked with the other compilers. -Andi diff -u linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c-o linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c --- linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c-o 2004-01-27 02:26:39.000000000 +0100 +++ linux-2.6.2rc1mm3-test/arch/i386/kernel/process.c 2004-01-27 19:09:41.131460832 +0100 @@ -253,13 +253,15 @@ * the "args". */ extern void kernel_thread_helper(void); -__asm__(".align 4\n" +__asm__(".section .text\n" + ".align 4\n" "kernel_thread_helper:\n\t" "movl %edx,%eax\n\t" "pushl %edx\n\t" "call *%ebx\n\t" "pushl %eax\n\t" - "call do_exit"); + "call do_exit\n" + ".previous"); /* * Create a kernel thread ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-27 22:30 ` Andi Kleen @ 2004-01-27 23:16 ` Andrew Morton 2004-01-27 23:29 ` Andi Kleen 0 siblings, 1 reply; 68+ messages in thread From: Andrew Morton @ 2004-01-27 23:16 UTC (permalink / raw) To: Andi Kleen; +Cc: ak, eric, stoffel, Valdis.Kletnieks, bunk, cova, linux-kernel Andi Kleen <ak@muc.de> wrote: > > > I've moved the enabling of -funit-at-a-time out of Makefile and down into > > arch/i386/Makefile, and I changed to require gcc-3.4 or higher. > > > > So if you want to use -funit-at-a-time on gcc-3.3/hammer you can do so. > > Please undo that and apply this patch instead. It fixes the bug that > broke booting with older gcc 3.3-hammer compilers (confirmed by > two people on l-k). It was plain luck that it worked with the other > compilers. I'll turn it on for gcc-3.3 and higher. We can change that if someone has tested earlier compilers. Also, I do think this should remain a per-arch decision. Other architectures could well have similar problems to this and we don't want to be mysteriously breaking their kernels for them. ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-27 23:16 ` Andrew Morton @ 2004-01-27 23:29 ` Andi Kleen 2004-01-27 23:45 ` Andrew Morton 0 siblings, 1 reply; 68+ messages in thread From: Andi Kleen @ 2004-01-27 23:29 UTC (permalink / raw) To: Andrew Morton Cc: Andi Kleen, eric, stoffel, Valdis.Kletnieks, bunk, cova, linux-kernel > I'll turn it on for gcc-3.3 and higher. We can change that if someone has > tested earlier compilers. Earlier compilers never supported -funit-at-a-time. The option was first implemented in gcc 3.3-hammer and later merged into 3.4. > Also, I do think this should remain a per-arch decision. Other > architectures could well have similar problems to this and we don't want to > be mysteriously breaking their kernels for them. That's fine by me. While you're at it could you enable it for x86-64 too? -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-27 23:29 ` Andi Kleen @ 2004-01-27 23:45 ` Andrew Morton 0 siblings, 0 replies; 68+ messages in thread From: Andrew Morton @ 2004-01-27 23:45 UTC (permalink / raw) To: Andi Kleen; +Cc: ak, eric, stoffel, Valdis.Kletnieks, bunk, cova, linux-kernel Andi Kleen <ak@muc.de> wrote: > > > I'll turn it on for gcc-3.3 and higher. We can change that if someone has > > tested earlier compilers. > > Earlier compilers never supported -funit-at-a-time. The option > was first implemented in gcc 3.3-hammer and later merged into 3.4. OK, then let's use check-gcc again. > > Also, I do think this should remain a per-arch decision. Other > > architectures could well have similar problems to this and we don't want to > > be mysteriously breaking their kernels for them. > > That's fine by me. While you're at it could you enable it for x86-64 too? yup. diff -puN arch/i386/Makefile~use-funit-at-a-time arch/i386/Makefile --- 25/arch/i386/Makefile~use-funit-at-a-time Tue Jan 27 15:40:09 2004 +++ 25-akpm/arch/i386/Makefile Tue Jan 27 15:42:26 2004 @@ -73,6 +73,10 @@ cflags-$(CONFIG_X86_ELAN) := -march=i486 GCC_VERSION := $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC)) cflags-$(CONFIG_REGPARM) += $(shell if [ $(GCC_VERSION) -ge 0300 ] ; then echo "-mregparm=3"; fi ;) +# Enable unit-at-a-time mode when possible. It shrinks the +# kernel considerably. +CFLAGS += $(call check_gcc,-funit-at-a-time,) + CFLAGS += $(cflags-y) # Default subarch .c files diff -puN arch/x86_64/Makefile~use-funit-at-a-time arch/x86_64/Makefile --- 25/arch/x86_64/Makefile~use-funit-at-a-time Tue Jan 27 15:42:34 2004 +++ 25-akpm/arch/x86_64/Makefile Tue Jan 27 15:44:44 2004 @@ -52,7 +52,10 @@ CFLAGS += -Wno-sign-compare ifneq ($(CONFIG_DEBUG_INFO),y) CFLAGS += -fno-asynchronous-unwind-tables endif -#CFLAGS += $(call check_gcc,-funit-at-a-time,) + +# Enable unit-at-a-time mode when possible. It shrinks the +# kernel considerably. +CFLAGS += $(call check_gcc,-funit-at-a-time,) head-y := arch/x86_64/kernel/head.o arch/x86_64/kernel/head64.o arch/x86_64/kernel/init_task.o _ ^ permalink raw reply [flat|nested] 68+ messages in thread
* 2.6.2-rc2 Hangs on boot (was: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED) 2004-01-26 6:00 ` Andrew Morton 2004-01-26 6:09 ` Andi Kleen 2004-01-26 19:26 ` Eric @ 2004-01-27 0:18 ` John Stoffel 2004-01-27 0:38 ` Andrew Morton 2004-01-27 9:40 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED Erik Hensema 3 siblings, 1 reply; 68+ messages in thread From: John Stoffel @ 2004-01-27 0:18 UTC (permalink / raw) To: Andrew Morton Cc: John Stoffel, ak, Valdis.Kletnieks, bunk, cova, eric, linux-kernel >>>>> "Andrew" == Andrew Morton <akpm@osdl.org> writes: Andrew> "John Stoffel" <stoffel@lucent.com> wrote: >> >> Sure, the darn thing wouldn't boot, it kept Oopsing with the >> test_wp_bit oops (that I just posted more details about). Andrew> Does this fix the test_wp_bit oops? Andrew> --- 25/init/main.c~test_wp_bit-oops-fix 2004-01-25 15:29:53.000000000 -0800 Andrew> +++ 25-akpm/init/main.c 2004-01-25 15:30:03.000000000 -0800 Andrew> @@ -434,9 +434,9 @@ asmlinkage void __init start_kernel(void Andrew> } Andrew> #endif Andrew> page_address_init(); Andrew> + sort_main_extable(); Andrew> mem_init(); Andrew> kmem_cache_init(); Andrew> - sort_main_extable(); Andrew> if (late_time_init) Andrew> late_time_init(); Andrew> calibrate_delay(); No, nor does this fix my booting problem(s) with 2.6.2-rc2. I'm now back and running 2.6.1-mm5 without any problems. Is there any further info I can give, or patches I can apply? I've applied the early printk patch, the above patch, and I'm at a loss where the problem is. It hangs at the following spot: Linux version 2.6.2-rc2 (john@jfsnew) (gcc version 3.3.3 20040110 (prerelease) (Debian)) #2 SMP Mon Jan 26 09:17:00 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fffe000 (usable) BIOS-e820: 000000002fffe000 - 0000000030000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 767MB LOWMEM available. found SMP MP-table at 000fe710 hm, page 000fe000 reserved twice. hm, page 000ff000 reserved twice. hm, page 000f0000 reserved twice. On node 0 totalpages: 196606 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192510 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Should I start adding in printks, or would it make sense to go back through the various 2.6.2-bk# snapshots looking for where the problem hit? Here's my PCI info, just in case this info helps: > lspci 00:00.0 Host bridge: Intel Corp. 440GX - 82443GX Host bridge 00:01.0 PCI bridge: Intel Corp. 440GX - 82443GX AGP bridge 00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 00:0d.0 RAID bus controller: Triones Technologies, Inc. HPT302 (rev 01) 00:10.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 13) 00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24) 00:13.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82) 02:08.0 USB Controller: NEC Corporation USB (rev 41) 02:08.1 USB Controller: NEC Corporation USB (rev 41) 02:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02) 02:0b.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) 03:06.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06) 03:0a.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 03:0e.0 SCSI storage controller: Adaptec AIC-7880U (rev 01) ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: 2.6.2-rc2 Hangs on boot (was: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED) 2004-01-27 0:18 ` 2.6.2-rc2 Hangs on boot (was: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED) John Stoffel @ 2004-01-27 0:38 ` Andrew Morton 0 siblings, 0 replies; 68+ messages in thread From: Andrew Morton @ 2004-01-27 0:38 UTC (permalink / raw) To: John Stoffel Cc: stoffel, ak, Valdis.Kletnieks, bunk, cova, eric, linux-kernel "John Stoffel" <stoffel@lucent.com> wrote: > > ... > It hangs at the following spot: > > Linux version 2.6.2-rc2 (john@jfsnew) (gcc version 3.3.3 20040110 > (prerelease) (Debian)) #2 SMP Mon Jan 26 09:17:00 EST 2004 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000002fffe000 (usable) > BIOS-e820: 000000002fffe000 - 0000000030000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > 767MB LOWMEM available. > found SMP MP-table at 000fe710 > hm, page 000fe000 reserved twice. > hm, page 000ff000 reserved twice. > hm, page 000f0000 reserved twice. > On node 0 totalpages: 196606 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 192510 pages, LIFO batch:16 > HighMem zone: 0 pages, LIFO batch:1 > > > Should I start adding in printks, or would it make sense to go back > through the various 2.6.2-bk# snapshots looking for where the problem > hit? Adding printk's is a pretty quick-n-easy way of finding out where it is getting stuck. Just add #define AAA() printk("%s:%d\n", __FILE__, __LINE__) to kernel.h and sprinkle AAA()'s everywhere. It takes a few iterations to drill right down to the bug. ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-26 6:00 ` Andrew Morton ` (2 preceding siblings ...) 2004-01-27 0:18 ` 2.6.2-rc2 Hangs on boot (was: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED) John Stoffel @ 2004-01-27 9:40 ` Erik Hensema 3 siblings, 0 replies; 68+ messages in thread From: Erik Hensema @ 2004-01-27 9:40 UTC (permalink / raw) To: linux-kernel Andrew Morton (akpm@osdl.org) wrote: > "John Stoffel" <stoffel@lucent.com> wrote: >> >> Sure, the darn thing wouldn't boot, it kept Oopsing with the >> test_wp_bit oops (that I just posted more details about). > > Does this fix the test_wp_bit oops? > > --- 25/init/main.c~test_wp_bit-oops-fix 2004-01-25 15:29:53.000000000 -0800 > +++ 25-akpm/init/main.c 2004-01-25 15:30:03.000000000 -0800 > @@ -434,9 +434,9 @@ asmlinkage void __init start_kernel(void > } > #endif > page_address_init(); > + sort_main_extable(); > mem_init(); > kmem_cache_init(); > - sort_main_extable(); > if (late_time_init) > late_time_init(); > calibrate_delay(); This makes 2.6.2-rc2 boot for me. -- Erik Hensema <erik@hensema.net> ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 17:48 ` Andi Kleen 2004-01-25 18:00 ` Valdis.Kletnieks @ 2004-01-25 21:11 ` Andrew Morton 2004-01-25 21:21 ` Fabio Coatti 2004-01-25 21:48 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED Adrian Bunk 1 sibling, 2 replies; 68+ messages in thread From: Andrew Morton @ 2004-01-25 21:11 UTC (permalink / raw) To: Andi Kleen; +Cc: bunk, cova, eric, linux-kernel Andi Kleen <ak@muc.de> wrote: > > > It seems use-funit-at-a-time breaks with distributions shipping a gcc > > 3.3 that supports -funit-at-a-time. > > It works for me with the hammer branch gcc 3.3 with -funit-at-a-time. > > Are you sure the exception table sorting patch was properly applied? I'd say so. There are no extable patches in current -mm. > > Th patch below replaces use-funit-at-a-time.patch and uses > > scripts/gcc-version.sh from add-config-for-mregparm-3-ng* to use > > -funit-at-a-time only with gcc >= 3.4 . > > I disagree with that change. Well there doesn't seem much doubt that -funit-at-a-time causes Fabio's kernel to fail. Do we know exactly which compiler he is using? ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 21:11 ` Andrew Morton @ 2004-01-25 21:21 ` Fabio Coatti 2004-01-25 21:46 ` Andi Kleen 2004-01-25 21:54 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - II Andi Kleen 2004-01-25 21:48 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED Adrian Bunk 1 sibling, 2 replies; 68+ messages in thread From: Fabio Coatti @ 2004-01-25 21:21 UTC (permalink / raw) To: Andrew Morton; +Cc: Andi Kleen, bunk, eric, linux-kernel Alle Sunday 25 January 2004 22:11, Andrew Morton ha scritto: > > > > I disagree with that change. > > Well there doesn't seem much doubt that -funit-at-a-time causes Fabio's > kernel to fail. Do we know exactly which compiler he is using? Well, I'm using gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk), provided with Mandrake 9.2. If more details about configuration are needed please let me know. -- Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password. ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 21:21 ` Fabio Coatti @ 2004-01-25 21:46 ` Andi Kleen 2004-01-25 22:03 ` Bartlomiej Zolnierkiewicz 2004-01-25 22:08 ` Fabio Coatti 2004-01-25 21:54 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - II Andi Kleen 1 sibling, 2 replies; 68+ messages in thread From: Andi Kleen @ 2004-01-25 21:46 UTC (permalink / raw) To: Fabio Coatti; +Cc: Andrew Morton, Andi Kleen, bunk, eric, linux-kernel On Sun, Jan 25, 2004 at 10:21:01PM +0100, Fabio Coatti wrote: > Alle Sunday 25 January 2004 22:11, Andrew Morton ha scritto: > > > > > > > I disagree with that change. > > > > Well there doesn't seem much doubt that -funit-at-a-time causes Fabio's > > kernel to fail. Do we know exactly which compiler he is using? > > Well, I'm using gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk), provided > with Mandrake 9.2. If more details about configuration are needed please let > me know. Let's take this from the start: what kernel version are you running exactly? what oops are you seeing? does official 2.6.2rc1 (not mm) with -funit-at-a-time enabled in the Makefile work? -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 21:46 ` Andi Kleen @ 2004-01-25 22:03 ` Bartlomiej Zolnierkiewicz 2004-01-25 22:08 ` Fabio Coatti 1 sibling, 0 replies; 68+ messages in thread From: Bartlomiej Zolnierkiewicz @ 2004-01-25 22:03 UTC (permalink / raw) To: Andi Kleen; +Cc: Fabio Coatti, Andrew Morton, bunk, eric, linux-kernel On Sun, 25 Jan 2004, Andi Kleen wrote: > On Sun, Jan 25, 2004 at 10:21:01PM +0100, Fabio Coatti wrote: > > Alle Sunday 25 January 2004 22:11, Andrew Morton ha scritto: > > > > > > > > > > I disagree with that change. > > > > > > Well there doesn't seem much doubt that -funit-at-a-time causes Fabio's > > > kernel to fail. Do we know exactly which compiler he is using? > > > > Well, I'm using gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk), provided > > with Mandrake 9.2. If more details about configuration are needed please let > > me know. > > Let's take this from the start: > > what kernel version are you running exactly? > what oops are you seeing? > does official 2.6.2rc1 (not mm) with -funit-at-a-time enabled in the Makefile > work? I remember trying 2.6.1-mm4 + your sort extable patch (i386 specific version) on Mandrake 9.2 -> no boot. Removing -funit-at-a-time cured problem. I didn't have time to investigate it more (like trying patched vanilla). Just FYI. --bart ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 21:46 ` Andi Kleen 2004-01-25 22:03 ` Bartlomiej Zolnierkiewicz @ 2004-01-25 22:08 ` Fabio Coatti 2004-01-25 22:13 ` Andi Kleen 1 sibling, 1 reply; 68+ messages in thread From: Fabio Coatti @ 2004-01-25 22:08 UTC (permalink / raw) To: Andi Kleen; +Cc: Andrew Morton, bunk, eric, linux-kernel Alle Sunday 25 January 2004 22:46, Andi Kleen ha scritto: > > what kernel version are you running exactly? I've tried all -mm versions for 2.6.1 and 2.6.2-rc1 The latest working one without any patch was 2.6.1-mm3 2.6.2-rc1-mm3 didn't work. > what oops are you seeing? no oops at all. The boot stops right after "Uncompressing.." line > does official 2.6.2rc1 (not mm) with -funit-at-a-time enabled in the > Makefile work? Yes. -- Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password. ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 22:08 ` Fabio Coatti @ 2004-01-25 22:13 ` Andi Kleen 2004-01-25 22:25 ` Andrew Morton ` (2 more replies) 0 siblings, 3 replies; 68+ messages in thread From: Andi Kleen @ 2004-01-25 22:13 UTC (permalink / raw) To: Fabio Coatti; +Cc: Andi Kleen, Andrew Morton, bunk, eric, linux-kernel On Sun, Jan 25, 2004 at 11:08:33PM +0100, Fabio Coatti wrote: > > does official 2.6.2rc1 (not mm) with -funit-at-a-time enabled in the > > Makefile work? > > Yes. Ok, then it is something in -mm*. I would suspect the new weird CPU configuration stuff. Can you double check you configured your CPU correctly? Or do you use 4/4? If yes turn that off. -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 22:13 ` Andi Kleen @ 2004-01-25 22:25 ` Andrew Morton 2004-01-25 22:31 ` Andi Kleen 2004-01-25 23:24 ` John Stoffel 2004-01-26 3:27 ` Adrian Bunk 2 siblings, 1 reply; 68+ messages in thread From: Andrew Morton @ 2004-01-25 22:25 UTC (permalink / raw) To: Andi Kleen; +Cc: cova, ak, bunk, eric, linux-kernel Andi Kleen <ak@muc.de> wrote: > > I would suspect the new weird CPU > configuration stuff. What do you believe is wrong with it? ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 22:25 ` Andrew Morton @ 2004-01-25 22:31 ` Andi Kleen 2004-01-25 22:59 ` Andrew Morton 0 siblings, 1 reply; 68+ messages in thread From: Andi Kleen @ 2004-01-25 22:31 UTC (permalink / raw) To: Andrew Morton; +Cc: Andi Kleen, cova, bunk, eric, linux-kernel On Sun, Jan 25, 2004 at 02:25:00PM -0800, Andrew Morton wrote: > Andi Kleen <ak@muc.de> wrote: > > > > I would suspect the new weird CPU > > configuration stuff. > > What do you believe is wrong with it? It's different and it is weird and probably easy to screw up. It's just that CPU configuration errors often cause problems before the console is running. And we unfortunately still don't have early printk on i386, which makes it hard to diagnose. -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 22:31 ` Andi Kleen @ 2004-01-25 22:59 ` Andrew Morton 2004-01-26 3:48 ` Adrian Bunk 0 siblings, 1 reply; 68+ messages in thread From: Andrew Morton @ 2004-01-25 22:59 UTC (permalink / raw) To: Andi Kleen; +Cc: ak, cova, bunk, eric, linux-kernel Andi Kleen <ak@muc.de> wrote: > > On Sun, Jan 25, 2004 at 02:25:00PM -0800, Andrew Morton wrote: > > Andi Kleen <ak@muc.de> wrote: > > > > > > I would suspect the new weird CPU > > > configuration stuff. > > > > What do you believe is wrong with it? > > It's different and it is weird and probably easy to screw up. > I must say that it does seem to be causing quite a few problems and doesn't have a very good benefit:breakage ratio. Maybe we should say that 2.6 has sucky CPU selection and leave it for 2.7. ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 22:59 ` Andrew Morton @ 2004-01-26 3:48 ` Adrian Bunk 0 siblings, 0 replies; 68+ messages in thread From: Adrian Bunk @ 2004-01-26 3:48 UTC (permalink / raw) To: Andrew Morton; +Cc: Andi Kleen, cova, eric, linux-kernel On Sun, Jan 25, 2004 at 02:59:48PM -0800, Andrew Morton wrote: > Andi Kleen <ak@muc.de> wrote: > > > > On Sun, Jan 25, 2004 at 02:25:00PM -0800, Andrew Morton wrote: > > > Andi Kleen <ak@muc.de> wrote: > > > > > > > > I would suspect the new weird CPU > > > > configuration stuff. > > > > > > What do you believe is wrong with it? > > > > It's different and it is weird and probably easy to screw up. > > > > I must say that it does seem to be causing quite a few problems and doesn't > have a very good benefit:breakage ratio. Maybe we should say that 2.6 has > sucky CPU selection and leave it for 2.7. The cpu selection patch is perhaps a bit prominent and therefore the first suspect in case of problems. After looking at yesterday's problems (including looking through the .config's) I'd claim that my cpu selection changes are definitely not guilty. Besides that it broke "allnoconfig" I haven't yet seen it having big problems caused. Your impression might be different, and you are the one who makes the decisions. cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 22:13 ` Andi Kleen 2004-01-25 22:25 ` Andrew Morton @ 2004-01-25 23:24 ` John Stoffel 2004-01-26 3:27 ` Adrian Bunk 2 siblings, 0 replies; 68+ messages in thread From: John Stoffel @ 2004-01-25 23:24 UTC (permalink / raw) To: Andi Kleen; +Cc: Fabio Coatti, Andrew Morton, bunk, eric, linux-kernel Andi> Ok, then it is something in -mm*. I would suspect the new weird Andi> CPU configuration stuff. Can you double check you configured Andi> your CPU correctly? As I recall (and I'll test tonight) it didn't make a difference if I chose just the PIII config, or if I compiled for I386 on up to PIII using the new selection stuff. Check the .config I posted before. I've got a laptop here, so maybe I can configure the serial console and get a copy of the boot messages so I can post them. We'll see if I get a chance to do this tongiht. Right now, 2.6.1-mm5 is compiling, I should be testing it, then 2.6.2-rc1 in an hour. John ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 22:13 ` Andi Kleen 2004-01-25 22:25 ` Andrew Morton 2004-01-25 23:24 ` John Stoffel @ 2004-01-26 3:27 ` Adrian Bunk 2 siblings, 0 replies; 68+ messages in thread From: Adrian Bunk @ 2004-01-26 3:27 UTC (permalink / raw) To: Andi Kleen; +Cc: Fabio Coatti, Andrew Morton, eric, linux-kernel On Sun, Jan 25, 2004 at 11:13:04PM +0100, Andi Kleen wrote: > On Sun, Jan 25, 2004 at 11:08:33PM +0100, Fabio Coatti wrote: > > > does official 2.6.2rc1 (not mm) with -funit-at-a-time enabled in the > > > Makefile work? > > > > Yes. > > Ok, then it is something in -mm*. I would suspect the new weird CPU > configuration stuff. Can you double check you configured your CPU correctly? >... The .config's were already sent, and they seemed to be correct. > -Andi cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - II 2004-01-25 21:21 ` Fabio Coatti 2004-01-25 21:46 ` Andi Kleen @ 2004-01-25 21:54 ` Andi Kleen 1 sibling, 0 replies; 68+ messages in thread From: Andi Kleen @ 2004-01-25 21:54 UTC (permalink / raw) To: Fabio Coatti; +Cc: Andrew Morton, Andi Kleen, bunk, eric, linux-kernel On Sun, Jan 25, 2004 at 10:21:01PM +0100, Fabio Coatti wrote: > Alle Sunday 25 January 2004 22:11, Andrew Morton ha scritto: > > > > > > > I disagree with that change. > > > > Well there doesn't seem much doubt that -funit-at-a-time causes Fabio's > > kernel to fail. Do we know exactly which compiler he is using? > > Well, I'm using gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk), provided > with Mandrake 9.2. If more details about configuration are needed please let > me know. Oh yes i forgot... Also please save your .config, do a make distclean and compile again and try if it still happens. Sometimes compile dirs get messed up and produce miscompilations. -Andi ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 21:11 ` Andrew Morton 2004-01-25 21:21 ` Fabio Coatti @ 2004-01-25 21:48 ` Adrian Bunk 1 sibling, 0 replies; 68+ messages in thread From: Adrian Bunk @ 2004-01-25 21:48 UTC (permalink / raw) To: Andrew Morton; +Cc: Andi Kleen, cova, eric, linux-kernel On Sun, Jan 25, 2004 at 01:11:53PM -0800, Andrew Morton wrote: > Andi Kleen <ak@muc.de> wrote: >... > > > Th patch below replaces use-funit-at-a-time.patch and uses > > > scripts/gcc-version.sh from add-config-for-mregparm-3-ng* to use > > > -funit-at-a-time only with gcc >= 3.4 . > > > > I disagree with that change. > > Well there doesn't seem much doubt that -funit-at-a-time causes Fabio's > kernel to fail. Do we know exactly which compiler he is using? gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk) cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED 2004-01-25 17:30 ` [patch] " Adrian Bunk 2004-01-25 17:48 ` Andi Kleen @ 2004-01-25 17:49 ` Valdis.Kletnieks 1 sibling, 0 replies; 68+ messages in thread From: Valdis.Kletnieks @ 2004-01-25 17:49 UTC (permalink / raw) To: Adrian Bunk; +Cc: Fabio Coatti, Andi Kleen, Andrew Morton, Eric, linux-kernel [-- Attachment #1: Type: text/plain, Size: 395 bytes --] On Sun, 25 Jan 2004 18:30:48 +0100, Adrian Bunk said: > Th patch below replaces use-funit-at-a-time.patch and uses > scripts/gcc-version.sh from add-config-for-mregparm-3-ng* to use > -funit-at-a-time only with gcc >= 3.4 . The Fedora gcc-ssa compiler has this problem, but claims to be 3.5. So at a minimum, we'd need to document the Fedora breakage and stick a big "Don't do that" on it. [-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --] ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-25 15:39 ` Fabio Coatti 2004-01-25 16:21 ` Adrian Bunk @ 2004-01-25 16:28 ` Valdis.Kletnieks 2004-01-25 17:12 ` Fabio Coatti 1 sibling, 1 reply; 68+ messages in thread From: Valdis.Kletnieks @ 2004-01-25 16:28 UTC (permalink / raw) To: Fabio Coatti; +Cc: Adrian Bunk, Eric, linux-kernel [-- Attachment #1: Type: text/plain, Size: 628 bytes --] On Sun, 25 Jan 2004 16:39:56 +0100, Fabio Coatti said: > gcc -Wp,-MD,fs/.dcache.o.d -nostdinc -iwithprefix include -D__KERNEL__ > -Iinclude -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs > -fno-strict-aliasing -fno-common -pipe -msoft-float > -mpreferred-stack-boundary=2 -march=pentium4 -Iinclude/asm-i386/mach-default > -O2 -fomit-frame-pointer -funit-at-a-time -DKBUILD_BASENAME=dcache > -DKBUILD_MODNAME=dcache -c -o fs/.tmp_dcache.o fs/dcache.c Does it work if you disable -funit-at-a-time? I had a problem with that totally wedging a kernel right after the decompressing/loading messages. [-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --] ^ permalink raw reply [flat|nested] 68+ messages in thread
* Re: Kernels > 2.6.1-mm3 do not boot. 2004-01-25 16:28 ` Kernels > 2.6.1-mm3 do not boot Valdis.Kletnieks @ 2004-01-25 17:12 ` Fabio Coatti 0 siblings, 0 replies; 68+ messages in thread From: Fabio Coatti @ 2004-01-25 17:12 UTC (permalink / raw) To: Valdis.Kletnieks; +Cc: Adrian Bunk, Eric, linux-kernel Alle Sunday 25 January 2004 17:28, Valdis.Kletnieks@vt.edu ha scritto: > Does it work if you disable -funit-at-a-time? I had a problem with that > totally wedging a kernel right after the decompressing/loading messages. Yep, the patch posted by Adrian removed -funit-at-a-time and now it works, thanks. -- Fabio Coatti http://www.ferrara.linux.it/members/cova Ferrara Linux Users Group http://ferrara.linux.it GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703 Old SysOps never die... they simply forget their password. ^ permalink raw reply [flat|nested] 68+ messages in thread
end of thread, other threads:[~2004-01-27 23:48 UTC | newest] Thread overview: 68+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2004-01-24 4:53 Kernels > 2.6.1-mm3 do not boot Eric 2004-01-24 6:11 ` Eric 2004-01-24 22:39 ` Eric 2004-01-25 1:02 ` Adrian Bunk 2004-01-25 4:03 ` Eric 2004-01-25 13:15 ` Adrian Bunk 2004-01-25 13:52 ` Fabio Coatti 2004-01-25 14:34 ` Adrian Bunk 2004-01-25 15:39 ` Fabio Coatti 2004-01-25 16:21 ` Adrian Bunk 2004-01-25 17:11 ` Kernels > 2.6.1-mm3 do not boot. - SOLVED Fabio Coatti 2004-01-25 17:30 ` [patch] " Adrian Bunk 2004-01-25 17:48 ` Andi Kleen 2004-01-25 18:00 ` Valdis.Kletnieks 2004-01-25 19:12 ` Andi Kleen 2004-01-25 20:21 ` John Stoffel 2004-01-25 20:25 ` Andi Kleen 2004-01-25 20:37 ` John Stoffel 2004-01-25 21:45 ` Andi Kleen 2004-01-25 21:49 ` Adrian Bunk 2004-01-25 23:18 ` John Stoffel 2004-01-25 23:47 ` Andi Kleen 2004-01-26 2:40 ` John Stoffel 2004-01-26 3:23 ` John Stoffel 2004-01-26 4:26 ` John Stoffel 2004-01-26 5:04 ` Andi Kleen 2004-01-26 14:14 ` John Stoffel 2004-01-26 14:36 ` Andi Kleen 2004-01-26 6:00 ` Andrew Morton 2004-01-26 6:09 ` Andi Kleen 2004-01-26 14:12 ` John Stoffel 2004-01-26 14:51 ` Fabio Coatti 2004-01-26 19:26 ` Eric 2004-01-26 19:56 ` Andrew Morton 2004-01-27 5:43 ` Eric 2004-01-27 5:50 ` Andrew Morton 2004-01-27 5:57 ` Eric 2004-01-27 6:37 ` Eric 2004-01-27 16:26 ` Andi Kleen 2004-01-27 18:15 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - REALLY SOLVED Andi Kleen 2004-01-27 19:31 ` Eric 2004-01-27 21:09 ` Fabio Coatti 2004-01-27 16:20 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED Andi Kleen 2004-01-27 20:54 ` Andrew Morton 2004-01-27 22:30 ` Andi Kleen 2004-01-27 23:16 ` Andrew Morton 2004-01-27 23:29 ` Andi Kleen 2004-01-27 23:45 ` Andrew Morton 2004-01-27 0:18 ` 2.6.2-rc2 Hangs on boot (was: [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED) John Stoffel 2004-01-27 0:38 ` Andrew Morton 2004-01-27 9:40 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED Erik Hensema 2004-01-25 21:11 ` Andrew Morton 2004-01-25 21:21 ` Fabio Coatti 2004-01-25 21:46 ` Andi Kleen 2004-01-25 22:03 ` Bartlomiej Zolnierkiewicz 2004-01-25 22:08 ` Fabio Coatti 2004-01-25 22:13 ` Andi Kleen 2004-01-25 22:25 ` Andrew Morton 2004-01-25 22:31 ` Andi Kleen 2004-01-25 22:59 ` Andrew Morton 2004-01-26 3:48 ` Adrian Bunk 2004-01-25 23:24 ` John Stoffel 2004-01-26 3:27 ` Adrian Bunk 2004-01-25 21:54 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - II Andi Kleen 2004-01-25 21:48 ` [patch] Re: Kernels > 2.6.1-mm3 do not boot. - SOLVED Adrian Bunk 2004-01-25 17:49 ` Valdis.Kletnieks 2004-01-25 16:28 ` Kernels > 2.6.1-mm3 do not boot Valdis.Kletnieks 2004-01-25 17:12 ` Fabio Coatti
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox