From: Martin Zwickel <martin.zwickel@technotrend.de>
To: linux-kernel@vger.kernel.org
Subject: IDE questions [kernel: 2.6.1-rc1]
Date: Thu, 29 Jan 2004 11:28:21 +0100 [thread overview]
Message-ID: <20040129112821.27b59313@phoebee> (raw)
[-- Attachment #1: Type: text/plain, Size: 1554 bytes --]
Hi there,
2 questions about IDE:
1.: with my machine:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800BB-00CAA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 >
cdrom: : unknown mrw mode page
^ no cdi->name?
is this for the hda device or hdc?
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
2.: with another machine:
I have a disk that has some bad sectors (that says the drive fitness test from
ibm). and I think one of the sectors is where the partition table is.
on kernel boot the kernel stops when it tries to detect the partitions and
gives some "dma timeout"s.
can I disable the partition table probe? is the "hdx=noprobe" argument the right
one?
Regards,
Martin
ps.: sorry for my bad english
--
MyExcuse:
halon system went off and killed the operators.
Martin Zwickel <martin.zwickel@technotrend.de>
Research & Development
TechnoTrend AG <http://www.technotrend.de>
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next reply other threads:[~2004-01-29 10:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-29 10:28 Martin Zwickel [this message]
2004-01-29 10:58 ` IDE questions [kernel: 2.6.1-rc1] Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040129112821.27b59313@phoebee \
--to=martin.zwickel@technotrend.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox