From: "Randy.Dunlap" <rddunlap@osdl.org>
To: Matthew Caron <matt@mattcaron.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2 PROBLEMs: mkinitrd fails during make install (2.6.1) + first network connect fails after boot (2.6.1)
Date: Sun, 8 Feb 2004 19:08:12 -0800 [thread overview]
Message-ID: <20040208190812.07703fce.rddunlap@osdl.org> (raw)
In-Reply-To: <40268B01.10608@mattcaron.net>
On Sun, 08 Feb 2004 14:16:17 -0500 Matthew Caron <matt@mattcaron.net> wrote:
| PROBLEM 1:
|
| 1. Summary:
| mkinitrd fails during make install (2.6.1)
|
| 2. Description:
| mkinitrd fails with error:
|
| No module 3w-xxxx found for kernel 2.6.1
| mkinitrd failed
| make[1]: *** [install] Error 1
| make: *** [install] Error 2
|
| config command was: 'make xconfig'
| build command was: 'make clean modules_install install'
What version of mkinitrd? Please send output from 'mkinitrd --version'.
Latest version seems to be 3.5.18.
| 3. Keywords:
| 2.6.1 mkinitrd 3w-xxxx
|
| 4. Kernel Version:
| Linux version 2.6.1 (root@localhost.localdomain) (gcc version 3.3.2
| 20031022 (Red Hat Linux 3.3.2-1)) #4 Sun Feb 8 00:38:13 EST 2004
|
| 5. Oops:
| None
|
| 6. Trigger:
| config included below:
[snipped]
Wow, I almost missed prob. 2. Probably better as separate postings.
| PROBLEM 2:
|
| 1. Summary:
| first network connect fails after boot
|
| 2. Description:
| The first connection to any host on any port fails after boot/reboot.
| Subsequent connects work fine. Typical errors are:
|
| ssh: connect to host foobar port 22: Resource temporarily unavailable
|
| Firebird reports "Document Contains No Data"
|
| 3. Keywords:
| 2.6.1 network connection failure
|
| 4. Kernel Version:
| Linux version 2.6.1 (root@case) (gcc version 3.3.2 20031022 (Red Hat
| Linux 3.3.2-1)) #9 SMP Sun Feb 8 12:55:51 EST 2004
|
| 5. Oops:
| None
|
| 6. Trigger:
| ssh-ing to something shows the problem quite well.
| config included below:
[snipped]
| 7. Environment:
| 7.1 Software:
| Linux case 2.6.1 #9 SMP Sun Feb 8 12:55:51 EST 2004 i686 athlon i386
| GNU/Linux
|
| Gnu C 3.3.2
| Gnu make 3.79.1
| util-linux 2.11y
| mount 2.11y
| module-init-tools 2.4.25
| e2fsprogs 1.34
| jfsutils 1.1.3
| reiserfsprogs 3.6.8
| pcmcia-cs 3.1.31
| quota-tools 3.06.
| PPP 2.4.1
| nfs-utils 1.0.6
| Linux C Library 2.3.2
| Dynamic linker (ldd) 2.3.2
| Procps 2.0.17
| Net-tools 1.60
| Kbd 1.08
| Sh-utils 5.0
| Modules Loaded
|
| 7.2 Processor:
| processor : 0
| vendor_id : AuthenticAMD
| cpu family : 6
| model : 6
| model name : AMD Athlon(tm) Processor
| stepping : 2
| cpu MHz : 1000.490
| cache size : 256 KB
| fdiv_bug : no
| hlt_bug : no
| f00f_bug : no
| coma_bug : no
| fpu : yes
| fpu_exception : yes
| cpuid level : 1
| wp : yes
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
| mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
| bogomips : 1966.08
|
| processor : 1
| vendor_id : AuthenticAMD
| cpu family : 6
| model : 6
| model name : AMD Athlon(tm) Processor
| stepping : 2
| cpu MHz : 1000.490
| cache size : 256 KB
| fdiv_bug : no
| hlt_bug : no
| f00f_bug : no
| coma_bug : no
| fpu : yes
| fpu_exception : yes
| cpuid level : 1
| wp : yes
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
| mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
| bogomips : 1998.84
|
| 7.3 Module Info:
| (none)
|
| 7.4: Driver/Hardware:
| /proc/ioports:
| 0000-001f : dma1
| 0020-0021 : pic1
| 0040-005f : timer
| 0060-006f : keyboard
| 0070-0077 : rtc
| 0080-008f : dma page reg
| 00a0-00a1 : pic2
| 00c0-00df : dma2
| 00f0-00ff : fpu
| 0170-0177 : ide1
| 01f0-01f7 : ide0
| 02f8-02ff : serial
| 0376-0376 : ide1
| 0378-037a : parport0
| 037b-037f : parport0
| 03c0-03df : vga+
| 03f6-03f6 : ide0
| 03f8-03ff : serial
| 0cf8-0cff : PCI conf1
| 1000-101f : 0000:00:08.0
| 1000-101f : e1000
| 1030-1033 : 0000:00:00.0
| 2000-2fff : PCI Bus #01
| 2000-20ff : 0000:01:05.0
| 3000-3fff : PCI Bus #02
| 3000-307f : 0000:02:08.0
| 3000-307f : 0000:02:08.0
| 3080-309f : 0000:02:07.0
| 3080-309f : EMU10K1
| 30a0-30af : 0000:02:06.0
| 30a0-30af : 3ware Storage Controller
| 30b0-30b7 : 0000:02:07.1
| 30b0-30b7 : emu10k1-gp
| f000-f00f : 0000:00:07.1
| f000-f007 : ide0
| f008-f00f : ide1
|
| /proc/iomem:
| 00000000-0009efff : System RAM
| 0009f000-0009ffff : reserved
| 000a0000-000bffff : Video RAM area
| 000cd000-000cd7ff : Extension ROM
| 000cd800-000cefff : Extension ROM
| 000cf000-000cffff : Extension ROM
| 000e0000-000effff : Extension ROM
| 000f0000-000fffff : System ROM
| 00100000-1feeffff : System RAM
| 00100000-0044a6f8 : Kernel code
| 0044a6f9-0058f0bf : Kernel data
| 1fef0000-1fefefff : ACPI Tables
| 1feff000-1fefffff : ACPI Non-volatile Storage
| 1ff00000-1ff7ffff : System RAM
| 1ff80000-1fffffff : reserved
| d0000000-d001ffff : 0000:00:08.0
| d0000000-d001ffff : e1000
| d0020000-d003ffff : 0000:00:08.0
| d0020000-d003ffff : e1000
| d0100000-d01fffff : PCI Bus #01
| d0100000-d010ffff : 0000:01:05.0
| d0200000-d02fffff : PCI Bus #02
| d0200000-d0203fff : 0000:02:04.0
| d0204000-d0204fff : 0000:02:00.0
| d0204000-d0204fff : ohci_hcd
| d0205000-d02057ff : 0000:02:04.0
| d0205000-d02057ff : ohci1394
| d0205800-d020587f : 0000:02:08.0
| d0500000-d0500fff : 0000:00:00.0
| d8000000-dfffffff : 0000:00:00.0
| e0000000-efffffff : PCI Bus #01
| e0000000-efffffff : 0000:01:05.0
| fec00000-fec03fff : reserved
| fee00000-fee00fff : reserved
| fff80000-ffffffff : reserved
|
| 7.5 PCI Info:
| 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
| System Controller (rev 11)
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort+ >SERR- <PERR-
| Latency: 32
| Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
| Region 1: Memory at d0500000 (32-bit, prefetchable) [size=4K]
| Region 2: I/O ports at 1030 [disabled] [size=4]
| Capabilities: <available only to root>
|
| 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
| AGP Bridge (prog-if 00 [Normal decode])
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
| Latency: 99
| Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
| I/O behind bridge: 00002000-00002fff
| Memory behind bridge: d0100000-d01fffff
| Prefetchable memory behind bridge: e0000000-efffffff
| BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
|
| 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 05)
| Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
| Latency: 0
|
| 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
| (rev 04) (prog-if 8a [Master SecP PriP])
| Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
| Latency: 0
| Region 4: I/O ports at f000 [size=16]
|
| 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03)
| Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI
| Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
|
| 00:08.0 Ethernet controller: Intel Corp. 82544EI Gigabit Ethernet
| Controller (Copper) (rev 02)
| Subsystem: Intel Corp. PRO/1000 XT Server Adapter
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
| Latency: 64 (63750ns min), cache line size 10
| Interrupt: pin A routed to IRQ 20
| Region 0: Memory at d0020000 (32-bit, non-prefetchable) [size=128K]
| Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=128K]
| Region 2: I/O ports at 1000 [size=32]
| Expansion ROM at <unassigned> [disabled] [size=128K]
| Capabilities: <available only to root>
|
| 00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev
| 05) (prog-if 00 [Normal decode])
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort+ >SERR- <PERR-
| Latency: 64
| Bus: primary=00, secondary=02, subordinate=02, sec-latency=168
| I/O behind bridge: 00003000-00003fff
| Memory behind bridge: d0200000-d02fffff
| Prefetchable memory behind bridge: fff00000-000fffff
| BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
|
| 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QM
| [Radeon 9100] (prog-if 00 [VGA])
| Subsystem: PC Partner Limited: Unknown device 7149
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
| Stepping+ SERR- FastB2B+
| Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
| Latency: 66 (2000ns min), cache line size 10
| Interrupt: pin A routed to IRQ 18
| Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
| Region 1: I/O ports at 2000 [size=256]
| Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
| Expansion ROM at <unassigned> [disabled] [size=128K]
| Capabilities: <available only to root>
|
| 02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-768 [Opus] USB
| (rev 07) (prog-if 10 [OHCI])
| Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] USB
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR+
| Latency: 64 (20000ns max)
| Interrupt: pin D routed to IRQ 19
| Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=4K]
|
| 02:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
| IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
| Subsystem: Adaptec: Unknown device 0030
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
| Latency: 64 (750ns min, 1000ns max), cache line size 10
| Interrupt: pin A routed to IRQ 16
| Region 0: Memory at d0205000 (32-bit, non-prefetchable) [size=2K]
| Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
| Capabilities: <available only to root>
|
| 02:06.0 RAID bus controller: 3ware Inc 3ware ATA-RAID (rev 12)
| Subsystem: 3ware Inc 3ware ATA-RAID
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
| Stepping+ SERR- FastB2B-
| Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
| Latency: 64 (2250ns min)
| Interrupt: pin A routed to IRQ 18
| Region 0: I/O ports at 30a0 [size=16]
| Expansion ROM at <unassigned> [disabled] [size=64K]
|
| 02:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 05)
| Subsystem: Creative Labs CT4760 SBLive!
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
| Latency: 64 (500ns min, 5000ns max)
| Interrupt: pin A routed to IRQ 19
| Region 0: I/O ports at 3080 [size=32]
| Capabilities: <available only to root>
|
| 02:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
| (rev 05)
| Subsystem: Creative Labs Gameport Joystick
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
| Latency: 64
| Region 0: I/O ports at 30b0 [size=8]
| Capabilities: <available only to root>
|
| 02:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
| (rev 78)
| Subsystem: Tyan Computer: Unknown device 2466
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
| Stepping- SERR- FastB2B-
| Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
| <TAbort- <MAbort- >SERR- <PERR-
| Latency: 80 (2500ns min, 2500ns max), cache line size 10
| Interrupt: pin A routed to IRQ 19
| Region 0: I/O ports at 3000 [size=128]
| Region 1: Memory at d0205800 (32-bit, non-prefetchable) [size=128]
| Expansion ROM at <unassigned> [disabled] [size=128K]
| Capabilities: <available only to root>
|
| 7.6 SCSI Info:
| Attached devices:
| Host: scsi0 Channel: 00 Id: 00 Lun: 00
| Vendor: 3ware Model: Logical Disk 0 Rev: 1.0
| Type: Direct-Access ANSI SCSI revision: ffffffff
|
| 7.7 Other Info:
| None that I can think of
|
| X. Notes:
| X.1 Machine 1 (above) does not exhibit this problem. Ethernet cards are
| identical.
| X.2 This machine exhibits this problem regardless of Ethernet card used.
|
| Thanks in advance.
| --
--
~Randy
next prev parent reply other threads:[~2004-02-09 3:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-08 19:16 2 PROBLEMs: mkinitrd fails during make install (2.6.1) + first network connect fails after boot (2.6.1) Matthew Caron
2004-02-09 3:08 ` Randy.Dunlap [this message]
2004-02-09 4:39 ` Matthew Caron
2004-02-21 0:37 ` Matthew Caron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040208190812.07703fce.rddunlap@osdl.org \
--to=rddunlap@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt@mattcaron.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox