* [PATCH] Buslogic.[ch] with gcc-2.95.4
@ 2004-02-09 13:24 carbonated beverage
0 siblings, 0 replies; only message in thread
From: carbonated beverage @ 2004-02-09 13:24 UTC (permalink / raw)
To: linux-kernel
Hi all,
Minor patch to get the BusLogic driver building again under
gcc-2.95.4 with the latest (as of this writing) bk pull from
the 2.6 tree.
Apparently, anonymous structs don't play well with gcc-2.95.4,
even with -std=gnu99.
Can someone eyeball this and forward it off to Linus if it's all
good?
Thanks,
-- DN
Daniel
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.1589 -> 1.1590
# drivers/scsi/BusLogic.h 1.16 -> 1.17
# drivers/scsi/BusLogic.c 1.27 -> 1.28
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 04/02/09 barbeque@kittens.172.16.0.1 1.1590
# Fix to get it building under gcc-2.95.4.
# --------------------------------------------
#
diff -Nru a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
--- a/drivers/scsi/BusLogic.c Mon Feb 9 05:22:57 2004
+++ b/drivers/scsi/BusLogic.c Mon Feb 9 05:22:57 2004
@@ -467,8 +467,8 @@
while (--TimeoutCounter >= 0)
{
StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
- if (StatusRegister.HostAdapterReady &&
- !StatusRegister.CommandParameterRegisterBusy)
+ if (StatusRegister.sr.HostAdapterReady &&
+ !StatusRegister.sr.CommandParameterRegisterBusy)
break;
udelay(100);
}
@@ -504,10 +504,10 @@
udelay(100);
InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
- if (InterruptRegister.CommandComplete) break;
+ if (InterruptRegister.ir.CommandComplete) break;
if (HostAdapter->HostAdapterCommandCompleted) break;
- if (StatusRegister.DataInRegisterReady) break;
- if (StatusRegister.CommandParameterRegisterBusy) continue;
+ if (StatusRegister.sr.DataInRegisterReady) break;
+ if (StatusRegister.sr.CommandParameterRegisterBusy) continue;
BusLogic_WriteCommandParameterRegister(HostAdapter, *ParameterPointer++);
ParameterLength--;
}
@@ -524,7 +524,7 @@
if (OperationCode == BusLogic_ModifyIOAddress)
{
StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
- if (StatusRegister.CommandInvalid)
+ if (StatusRegister.sr.CommandInvalid)
{
BusLogic_CommandFailureReason = "Modify I/O Address Invalid";
Result = -1;
@@ -562,16 +562,16 @@
{
InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
- if (InterruptRegister.CommandComplete) break;
+ if (InterruptRegister.ir.CommandComplete) break;
if (HostAdapter->HostAdapterCommandCompleted) break;
- if (StatusRegister.DataInRegisterReady)
+ if (StatusRegister.sr.DataInRegisterReady)
{
if (++ReplyBytes <= ReplyLength)
*ReplyPointer++ = BusLogic_ReadDataInRegister(HostAdapter);
else BusLogic_ReadDataInRegister(HostAdapter);
}
if (OperationCode == BusLogic_FetchHostAdapterLocalRAM &&
- StatusRegister.HostAdapterReady) break;
+ StatusRegister.sr.HostAdapterReady) break;
udelay(100);
}
if (TimeoutCounter < 0)
@@ -602,7 +602,7 @@
/*
Process Command Invalid conditions.
*/
- if (StatusRegister.CommandInvalid)
+ if (StatusRegister.sr.CommandInvalid)
{
/*
Some early BusLogic Host Adapters may not recover properly from
@@ -614,14 +614,14 @@
*/
udelay(1000);
StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
- if (StatusRegister.CommandInvalid ||
- StatusRegister.Reserved ||
- StatusRegister.DataInRegisterReady ||
- StatusRegister.CommandParameterRegisterBusy ||
- !StatusRegister.HostAdapterReady ||
- !StatusRegister.InitializationRequired ||
- StatusRegister.DiagnosticActive ||
- StatusRegister.DiagnosticFailure)
+ if (StatusRegister.sr.CommandInvalid ||
+ StatusRegister.sr.Reserved ||
+ StatusRegister.sr.DataInRegisterReady ||
+ StatusRegister.sr.CommandParameterRegisterBusy ||
+ !StatusRegister.sr.HostAdapterReady ||
+ !StatusRegister.sr.InitializationRequired ||
+ StatusRegister.sr.DiagnosticActive ||
+ StatusRegister.sr.DiagnosticFailure)
{
BusLogic_SoftReset(HostAdapter);
udelay(1000);
@@ -1333,11 +1333,11 @@
HostAdapter->IO_Address, StatusRegister.All,
InterruptRegister.All, GeometryRegister.All);
if (StatusRegister.All == 0 ||
- StatusRegister.DiagnosticActive ||
- StatusRegister.CommandParameterRegisterBusy ||
- StatusRegister.Reserved ||
- StatusRegister.CommandInvalid ||
- InterruptRegister.Reserved != 0)
+ StatusRegister.sr.DiagnosticActive ||
+ StatusRegister.sr.CommandParameterRegisterBusy ||
+ StatusRegister.sr.Reserved ||
+ StatusRegister.sr.CommandInvalid ||
+ InterruptRegister.ir.Reserved != 0)
return false;
/*
Check the undocumented Geometry Register to test if there is an I/O port
@@ -1405,7 +1405,7 @@
while (--TimeoutCounter >= 0)
{
StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
- if (StatusRegister.DiagnosticActive) break;
+ if (StatusRegister.sr.DiagnosticActive) break;
udelay(100);
}
if (BusLogic_GlobalOptions.TraceHardwareReset)
@@ -1426,7 +1426,7 @@
while (--TimeoutCounter >= 0)
{
StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
- if (!StatusRegister.DiagnosticActive) break;
+ if (!StatusRegister.sr.DiagnosticActive) break;
udelay(100);
}
if (BusLogic_GlobalOptions.TraceHardwareReset)
@@ -1442,9 +1442,9 @@
while (--TimeoutCounter >= 0)
{
StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
- if (StatusRegister.DiagnosticFailure ||
- StatusRegister.HostAdapterReady ||
- StatusRegister.DataInRegisterReady)
+ if (StatusRegister.sr.DiagnosticFailure ||
+ StatusRegister.sr.HostAdapterReady ||
+ StatusRegister.sr.DataInRegisterReady)
break;
udelay(100);
}
@@ -1458,14 +1458,14 @@
error occurred during the Host Adapter diagnostics. If Data In Register
Ready is set, then there is an Error Code available.
*/
- if (StatusRegister.DiagnosticFailure ||
- !StatusRegister.HostAdapterReady)
+ if (StatusRegister.sr.DiagnosticFailure ||
+ !StatusRegister.sr.HostAdapterReady)
{
BusLogic_CommandFailureReason = NULL;
BusLogic_Failure(HostAdapter, "HARD RESET DIAGNOSTICS");
BusLogic_Error("HOST ADAPTER STATUS REGISTER = %02X\n",
HostAdapter, StatusRegister.All);
- if (StatusRegister.DataInRegisterReady)
+ if (StatusRegister.sr.DataInRegisterReady)
{
unsigned char ErrorCode = BusLogic_ReadDataInRegister(HostAdapter);
BusLogic_Error("HOST ADAPTER ERROR CODE = %d\n",
@@ -1756,7 +1756,7 @@
*/
GeometryRegister.All = BusLogic_ReadGeometryRegister(HostAdapter);
HostAdapter->ExtendedTranslationEnabled =
- GeometryRegister.ExtendedTranslationEnabled;
+ GeometryRegister.gr.ExtendedTranslationEnabled;
/*
Save the Scatter Gather Limits, Level Sensitive Interrupt flag, Wide
SCSI flag, Differential SCSI flag, SCAM Supported flag, and
@@ -3184,7 +3184,7 @@
Read the Host Adapter Interrupt Register.
*/
InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
- if (InterruptRegister.InterruptValid)
+ if (InterruptRegister.ir.InterruptValid)
{
/*
Acknowledge the interrupt and reset the Host Adapter
@@ -3197,11 +3197,11 @@
and Outgoing Mailbox Available Interrupts are ignored, as
they are never enabled.
*/
- if (InterruptRegister.ExternalBusReset)
+ if (InterruptRegister.ir.ExternalBusReset)
HostAdapter->HostAdapterExternalReset = true;
- else if (InterruptRegister.IncomingMailboxLoaded)
+ else if (InterruptRegister.ir.IncomingMailboxLoaded)
BusLogic_ScanIncomingMailboxes(HostAdapter);
- else if (InterruptRegister.CommandComplete)
+ else if (InterruptRegister.ir.CommandComplete)
HostAdapter->HostAdapterCommandCompleted = true;
}
}
diff -Nru a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
--- a/drivers/scsi/BusLogic.h Mon Feb 9 05:22:57 2004
+++ b/drivers/scsi/BusLogic.h Mon Feb 9 05:22:57 2004
@@ -344,7 +344,7 @@
boolean InterruptReset:1; /* Bit 5 */
boolean SoftReset:1; /* Bit 6 */
boolean HardReset:1; /* Bit 7 */
- };
+ } cr;
};
/*
@@ -363,7 +363,7 @@
boolean InitializationRequired:1; /* Bit 5 */
boolean DiagnosticFailure:1; /* Bit 6 */
boolean DiagnosticActive:1; /* Bit 7 */
- };
+ } sr;
};
/*
@@ -380,7 +380,7 @@
boolean ExternalBusReset:1; /* Bit 3 */
unsigned char Reserved:3; /* Bits 4-6 */
boolean InterruptValid:1; /* Bit 7 */
- };
+ } ir;
};
/*
@@ -395,7 +395,7 @@
enum BusLogic_BIOS_DiskGeometryTranslation Drive1Geometry:2;/* Bits 2-3 */
unsigned char :3; /* Bits 4-6 */
boolean ExtendedTranslationEnabled:1; /* Bit 7 */
- };
+ } gr;
};
/*
@@ -1272,7 +1272,7 @@
{
union BusLogic_ControlRegister ControlRegister;
ControlRegister.All = 0;
- ControlRegister.SCSIBusReset = true;
+ ControlRegister.cr.SCSIBusReset = true;
outb(ControlRegister.All,
HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
}
@@ -1281,7 +1281,7 @@
{
union BusLogic_ControlRegister ControlRegister;
ControlRegister.All = 0;
- ControlRegister.InterruptReset = true;
+ ControlRegister.cr.InterruptReset = true;
outb(ControlRegister.All,
HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
}
@@ -1290,7 +1290,7 @@
{
union BusLogic_ControlRegister ControlRegister;
ControlRegister.All = 0;
- ControlRegister.SoftReset = true;
+ ControlRegister.cr.SoftReset = true;
outb(ControlRegister.All,
HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
}
@@ -1299,7 +1299,7 @@
{
union BusLogic_ControlRegister ControlRegister;
ControlRegister.All = 0;
- ControlRegister.HardReset = true;
+ ControlRegister.cr.HardReset = true;
outb(ControlRegister.All,
HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
}
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-02-09 13:28 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-09 13:24 [PATCH] Buslogic.[ch] with gcc-2.95.4 carbonated beverage
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox