Re: Linux 2.6.3-rc3

[Ernst Herzberg <earny@net4u.de>]

On Sonntag, 15. Februar 2004 21:11, Peter Osterlund wrote:
> Ernst Herzberg <earny@net4u.de> writes:
> > Compile warnings with new driver:
> >
> > [...]
> > drivers/video/aty/radeon_base.c: In function
> > `radeon_probe_pll_params': drivers/video/aty/radeon_base.c:474:
> > warning: `xtal' might be used uninitialized in this function
>
> This looks like a real bug. I guess the patch below fixes it, but I
> can't test it because that code is not executed on my hardware. (And I
> doubt it will fix your problem.)
>
> --- linux/drivers/video/aty/radeon_base.c.old	2004-02-15
> 21:06:02.000000000 +0100 +++
> linux/drivers/video/aty/radeon_base.c	2004-02-15 20:57:22.000000000
> +0100 @@ -566,8 +566,9 @@
>  		break;
>  	}
>
> -	do_div(vclk, 1000);
> -	xtal = (xtal * denom) / num;
> +	vclk *= denom;
> +	do_div(vclk, 1000 * num);
> +	xtal = vclk;
>
>  	if ((xtal > 26900) && (xtal < 27100))
>  		xtal = 2700;
>
> > drivers/video/aty/radeon_base.c: In function `radeon_screen_blank':
> > drivers/video/aty/radeon_base.c:944: warning: `val2' might be used
> > uninitialized in this function drivers/video/aty/radeon_base.c: In
> > function `radeonfb_setcolreg': drivers/video/aty/radeon_base.c:1025:
> > warning: `vclk_cntl' might be used uninitialized in this function CC  
> >    net/sunrpc/timer.o
> > drivers/video/aty/radeon_base.c: In function `radeon_calc_pll_regs':
> > drivers/video/aty/radeon_base.c:1319: warning: `pll_output_freq' might
> > be used uninitialized in this function
>
> I think these warnings are harmless.


This patch does not help, the console is still blank. The monitor shows:

H. Freq 63.98 kHz
V. Freq 60.00 HZ
Pixel Clock 107.98 Mhz
Resolution 1280x1024
Belinea101705

.. but with a black screen...

~Earny