public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Fabio Coatti <cova@ferrara.linux.it>
To: <linux-kernel@vger.kernel.org>
Subject: 2.6.3-mm1 and aic7xxx
Date: Thu, 19 Feb 2004 22:34:53 +0100	[thread overview]
Message-ID: <200402192234.53855.cova@ferrara.linux.it> (raw)

I'm experiencing some problems with 2.6.3-mm1 release: on boot the system 
hangs trying to detect scsi devices, and the light on scsi cdrom flashes 
every few seconds. With 2.6.3-rc3-mm1 all works just fine, and I get this 
syslog entry:

Feb 19 22:23:15 kefk kernel: ahc_pci:3:6:0: Host Adapter Bios disabled.  Using 
default SCSI device parameters
Feb 19 22:23:15 kefk kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA 
DRIVER, Rev 6.2.36
Feb 19 22:23:15 kefk kernel:         <Adaptec 2902/04/10/15/20C/30C SCSI 
adapter>
Feb 19 22:23:15 kefk kernel:         aic7850: Single Channel A, SCSI Id=7, 
3/253 SCBs

<<<<<<<<<<<<<<<2.6.3-mm1 hangs here

Feb 19 22:23:15 kefk kernel:
Feb 19 22:23:15 kefk kernel:   Vendor: Nikon     Model: COOLSCANIII       Rev: 
1.31
Feb 19 22:23:15 kefk kernel:   Type:   Scanner                            ANSI 
SCSI revision: 02
Feb 19 22:23:15 kefk kernel: (scsi0:A:3): 10.000MB/s transfers (10.000MHz, 
offset 15)
Feb 19 22:23:15 kefk kernel:   Vendor: PLEXTOR   Model: CD-ROM PX-40TS    Rev: 
1.01
Feb 19 22:23:15 kefk kernel:   Type:   CD-ROM                             ANSI 
SCSI revision: 02
Feb 19 22:23:15 kefk kernel: (scsi0:A:5): 10.000MB/s transfers (10.000MHz, 
offset 15)
Feb 19 22:23:15 kefk kernel:   Vendor: YAMAHA    Model: CRW6416S          Rev: 
1.0c
Feb 19 22:23:15 kefk kernel:   Type:   CD-ROM                             ANSI 
SCSI revision: 02

I've also noticed (only with 2.6.3-mm1) a "PCI BIOS passed non existent PCI 
BUS 0!" message when it probes ICH5, i.e.

Feb 19 22:23:15 kefk kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1

<<<<<<<<<<<<HERE

Feb 19 22:23:15 kefk kernel: ICH5: chipset revision 2
Feb 19 22:23:15 kefk kernel: ICH5: not 100%% native mode: will probe irqs 
later
Feb 19 22:23:15 kefk kernel:     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: 
hda:DMA, hdb:pio
Feb 19 22:23:15 kefk kernel:     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: 
hdc:pio, hdd:pio

system: PIV 2.HT/i875p (abit ic7-g), SMP kernel (SMT), 
gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)

I can provide more details if needed, and any help will be appreciated.

Thanks.

-- 
Fabio Coatti       http://www.ferrara.linux.it/members/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.

             reply	other threads:[~2004-02-19 21:35 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-02-19 21:34 Fabio Coatti [this message]
2004-02-20  0:21 ` 2.6.3-mm1 and aic7xxx Andrew Morton
2004-02-20 20:22   ` Fabio Coatti
2004-02-21  0:53   ` Fabio Coatti
  -- strict thread matches above, loose matches on Subject: below --
2004-02-21 10:47 P. Christeas
     [not found] <A6974D8E5F98D511BB910002A50A6647615F2BAD@hdsmsx402.hd.intel.com>
2004-02-23  7:28 ` Len Brown
2004-02-23  9:06   ` Fabio Coatti
2004-02-29 23:30   ` Fabio Coatti
2004-02-29 23:42     ` Andrew Morton
2004-03-01  0:37       ` Fabio Coatti
2004-02-29 23:45 Brown, Len
2004-03-01  0:39 ` Fabio Coatti
2004-03-01 23:33   ` Fabio Coatti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200402192234.53855.cova@ferrara.linux.it \
    --to=cova@ferrara.linux.it \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox