* Kernel panic on kernel 2.6.3 with AIC-7770 SCSI controller
@ 2004-03-03 21:15 Guðmundur D. Haraldsson
0 siblings, 0 replies; only message in thread
From: Guðmundur D. Haraldsson @ 2004-03-03 21:15 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 8358 bytes --]
Hi,
I have a HP NetServer machine which I want to upgrade to kernel 2.6.3, but I am unable
to do so since the machine panics when probing the SCSI controller, which is an Adaptec
AIC-7770. Please note that the driver for the card is built into the kernel, so it has
not even started init when this happens. This problem also happens with kernel 2.4.22, but
2.4.7 works fine.
My environment is this:
HP NetServer LC 133MHz, 64MB RAM, 4 SCSI Hard-drives, 1 tape drive and 1 cd-rom drive -
all of those are connected to the AIC-7770. More info about the hardware is in the bottom
of the message.
Gnu C 2.96
Gnu make 3.79.1
util-linux 2.11f
mount 2.11g
module-init-tools writing
e2fsprogs 1.26
pcmcia-cs 3.1.22
quota-tools 3.06.
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded ipv6 ipt_REJECT iptable_nat ip_conntrack iptable_filter ip_tables eepro100 st aic7xxx sd_mod scsi_mod
---
I was able to catch the oops and after I ran it through the ksymoops program, I get this:
ksymoops 2.4.1 on i586 2.4.7-10. Options used
-v /home/gdh/linux-2.6.3/vmlinux (specified)
-K (specified)
-L (specified)
-o /lib/modules/2.6.3/ (specified)
-m /home/gdh/linux-2.6.3/System.map (specified)
No modules in ksyms, skipping objects
Intel Pentium with F0 0F bug - workaround enabled.
Receiver lock-up bug exists -- enabling work-around.
Unable to handle kernel NULL pointer dereference at virtual address 00000088
c0178749
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c0178749>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: 00000070 ebx: 00000070 ecx: 00000005 edx: c3f50cc0
esi: c3f50cc0 edi: c3f50d1e ebp: c3f50cc0 esp: c10bff84
ds: 007b es: 007b ss: 0068
Stack: c3f50d18 c01a1011 00000070 c01a0f3b 0000004c 0000004c c3f50c00 c02b4960
c3f50cc0 c01cce40 c3f50cc0 c3f50c00 c02b49d4 c02b4960 00000000 c02eea9e
c3f50c00 00000000 c0335d28 00000000 00000000 c02de68b c0105060 00000000
[<c01a1011>] get_device+0x11/0x20
[<c01a0f3b>] device_add+0x3b/0xe0
[<c01cce40>] scsi_add_host+0x80/0xf0
[<c02eea9e>] init_this_scsi_driver+0x7e/0xe0
[<c02de68b>] do_initcalls+0x3b/0x90
[<c0105060>] init+0x0/0xe0
[<c010507a>] init+0x1a/0xe0
[<c0105060>] init+0x0/0xe0
[<c0106f95>] kernel_thread_helper+0x5/0x10
Code: 8b 43 18 85 c0 75 21 68 af 01 00 00 68 80 a7 26 c0 68 8e a7
>>EIP; c0178749 <kobject_get+9/40> <=====
Code; c0178749 <kobject_get+9/40>
00000000 <_EIP>:
Code; c0178749 <kobject_get+9/40> <=====
0: 8b 43 18 mov 0x18(%ebx),%eax <=====
Code; c017874c <kobject_get+c/40>
3: 85 c0 test %eax,%eax
Code; c017874e <kobject_get+e/40>
5: 75 21 jne 28 <_EIP+0x28> c0178771 <kobject_get+31/40>
Code; c0178750 <kobject_get+10/40>
7: 68 af 01 00 00 push $0x1af
Code; c0178755 <kobject_get+15/40>
c: 68 80 a7 26 c0 push $0xc026a780
Code; c017875a <kobject_get+1a/40>
11: 68 8e a7 00 00 push $0xa78e
<0>Kernel panic: Attempted to kill init!
---
More about the hardware:
.. and the PCI devices:
00:00.0 Host bridge: Intel Corporation 82434LX [Mercury/Neptune] (rev 11)
00:03.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 01)
00:04.0 Non-VGA unclassified device: Intel Corporation 82375EB (rev 03)
.. and the SCSI controller seen by the 2.4.7 kernel, which works (!):
SCSI subsystem driver Revision: 1.00
(scsi0) <Adaptec AIC-7770 SCSI host adapter> found at EISA slot 11
(scsi0) Twin Channel, A SCSI ID 7, B SCSI ID 7, 4/255 SCBs
(scsi0) Downloading sequencer code... 426 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0
<Adaptec AIC-7770 SCSI host adapter>
Vendor: IBM Model: DCAS-34330W Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
(scsi0:0:1:0) Synchronous at 10.0 Mbyte/sec, offset 15.
Vendor: COMPAQ Model: ST32171W Rev: 0388
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SONY Model: CD-ROM CDU-76S Rev: 1.1c
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HP Model: C1533A Rev: A708
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: Quantum Model: XP32150W Rev: L912
Type: Direct-Access ANSI SCSI revision: 02
Vendor: IBM Model: DCAS-34330W Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdc at scsi0, channel 1, id 0, lun 0
Attached scsi disk sdd at scsi0, channel 1, id 1, lun 0
(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sda: 8467200 512-byte hdwr sectors (4335 MB)
sda: sda1 sda4
SCSI device sdb: 4110000 512-byte hdwr sectors (2104 MB)
sdb: sdb1 sdb2 < sdb5 sdb6 >
(scsi0:1:0:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sdc: 4406960 512-byte hdwr sectors (2256 MB)
sdc: sdc1
(scsi0:1:1:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sdd: 8467200 512-byte hdwr sectors (4335 MB)
sdd: sdd1
.. and the CPU:
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 2
model name : Pentium 75 - 200
stepping : 12
cpu MHz : 133.335
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8
bogomips : 265.42
.. and iomem:
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cffff : Extension ROM
000f0000-000fffff : System ROM
00100000-03ffffff : System RAM
00100000-0024007f : Kernel code
00240080-00256a6b : Kernel data
fecff000-fecfffff : Intel Corporation 82557 [Ethernet Pro 100]
fecff000-fecfffff : eepro100
fed00000-fedfffff : Intel Corporation 82557 [Ethernet Pro 100]
.. and ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03b0-03bf : ega
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cfb : PCI conf2
bc00-bcfe : aic7xxx
fce0-fcff : Intel Corporation 82557 [Ethernet Pro 100]
fce0-fcff : eepro100
.. and interrupts:
CPU0
0: 7781679 XT-PIC timer
1: 21 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
11: 66644 XT-PIC eth0
12: 0 XT-PIC PS/2 Mouse
14: 12 XT-PIC ide0
15: 85576 XT-PIC aic7xxx
NMI: 0
ERR: 0
I really hope that this is enough info, just let me know if there is something I'm missing.
If needed, I can try to pin down when this problem started to happen (which is somewhere 2.4.7
and 2.4.22), I'll do so if requested.
Thank you very much,
best regards,
Gudmundur D. Haraldsson.
--
===================================================================================
| Guðmundur D. Haraldsson | When you have eliminated the impossible,|
| gdh@binhex.EU.org | what ever remains, however improbable, |
| http://www.binhex.EU.org/ | must be the truth. |
| | - Sherlock Holmes, "The sign of four" |
|---------------------------------------------------------------------------------|
| GPG key: lynx -dump http://vlug.eyjar.is/gdh/gpgkey.asc | gpg --import |
| Key fingerprint = DE6D A875 EA92 0699 9B49 8C49 2DBB 76BF ADD4 C933 |
===================================================================================
// Spammers will be asphyxiated in paté!
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-03-03 21:16 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-03 21:15 Kernel panic on kernel 2.6.3 with AIC-7770 SCSI controller Guðmundur D. Haraldsson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox