From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261195AbUCCVQP (ORCPT ); Wed, 3 Mar 2004 16:16:15 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261203AbUCCVQP (ORCPT ); Wed, 3 Mar 2004 16:16:15 -0500 Received: from BOFH.binhex.EU.org ([212.30.223.106]:37894 "EHLO binhex.EU.org") by vger.kernel.org with ESMTP id S261195AbUCCVP6 (ORCPT ); Wed, 3 Mar 2004 16:15:58 -0500 Date: Wed, 3 Mar 2004 21:15:53 +0000 From: =?iso-8859-1?Q?Gu=F0mundur_D=2E?= Haraldsson To: linux-kernel@vger.kernel.org Subject: Kernel panic on kernel 2.6.3 with AIC-7770 SCSI controller Message-ID: <20040303211553.GA2902@binhex.EU.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="h31gzZEtNLTqOjlF" Content-Disposition: inline User-Agent: Mutt/1.4.1i X-Organization: binhex.EU.org X-To-Spammer: You spam me and you will get an anal probe. X-Spam-Search-By: binhex.EU.org Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --h31gzZEtNLTqOjlF Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi,=20 I have a HP NetServer machine which I want to upgrade to kernel 2.6.3, but = I am unable to do so since the machine panics when probing the SCSI controller, which i= s an Adaptec=20 AIC-7770. Please note that the driver for the card is built into the kernel= , so it has=20 not even started init when this happens. This problem also happens with ker= nel 2.4.22, but 2.4.7 works fine. My environment is this: HP NetServer LC 133MHz, 64MB RAM, 4 SCSI Hard-drives, 1 tape drive and 1 cd= -rom drive -=20 all of those are connected to the AIC-7770. More info about the hardware is= in the bottom of the message. Gnu C 2.96 Gnu make 3.79.1 util-linux 2.11f mount 2.11g module-init-tools writing e2fsprogs 1.26 pcmcia-cs 3.1.22 quota-tools 3.06. Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.60 Console-tools 0.3.3 Sh-utils 2.0.11 Modules Loaded ipv6 ipt_REJECT iptable_nat ip_conntrack iptable_fil= ter ip_tables eepro100 st aic7xxx sd_mod scsi_mod --- I was able to catch the oops and after I ran it through the ksymoops progra= m, I get this: ksymoops 2.4.1 on i586 2.4.7-10. Options used -v /home/gdh/linux-2.6.3/vmlinux (specified) -K (specified) -L (specified) -o /lib/modules/2.6.3/ (specified) -m /home/gdh/linux-2.6.3/System.map (specified) No modules in ksyms, skipping objects Intel Pentium with F0 0F bug - workaround enabled. Receiver lock-up bug exists -- enabling work-around. Unable to handle kernel NULL pointer dereference at virtual address 00000088 c0178749 *pde =3D 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010202 eax: 00000070 ebx: 00000070 ecx: 00000005 edx: c3f50cc0 esi: c3f50cc0 edi: c3f50d1e ebp: c3f50cc0 esp: c10bff84 ds: 007b es: 007b ss: 0068 Stack: c3f50d18 c01a1011 00000070 c01a0f3b 0000004c 0000004c c3f50c00 c02b4= 960=20 c3f50cc0 c01cce40 c3f50cc0 c3f50c00 c02b49d4 c02b4960 00000000 c02ee= a9e=20 c3f50c00 00000000 c0335d28 00000000 00000000 c02de68b c0105060 00000= 000=20 [] get_device+0x11/0x20 [] device_add+0x3b/0xe0 [] scsi_add_host+0x80/0xf0 [] init_this_scsi_driver+0x7e/0xe0 [] do_initcalls+0x3b/0x90 [] init+0x0/0xe0 [] init+0x1a/0xe0 [] init+0x0/0xe0 [] kernel_thread_helper+0x5/0x10 Code: 8b 43 18 85 c0 75 21 68 af 01 00 00 68 80 a7 26 c0 68 8e a7=20 >>EIP; c0178749 <=3D=3D=3D=3D=3D Code; c0178749 00000000 <_EIP>: Code; c0178749 <=3D=3D=3D=3D=3D 0: 8b 43 18 mov 0x18(%ebx),%eax <=3D=3D=3D=3D=3D Code; c017874c 3: 85 c0 test %eax,%eax Code; c017874e 5: 75 21 jne 28 <_EIP+0x28> c0178771 Code; c0178750 7: 68 af 01 00 00 push $0x1af Code; c0178755 c: 68 80 a7 26 c0 push $0xc026a780 Code; c017875a 11: 68 8e a7 00 00 push $0xa78e <0>Kernel panic: Attempted to kill init! --- More about the hardware: =2E. and the PCI devices: 00:00.0 Host bridge: Intel Corporation 82434LX [Mercury/Neptune] (rev 11) 00:03.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (re= v 01) 00:04.0 Non-VGA unclassified device: Intel Corporation 82375EB (rev 03) =2E. and the SCSI controller seen by the 2.4.7 kernel, which works (!): SCSI subsystem driver Revision: 1.00 (scsi0) found at EISA slot 11 (scsi0) Twin Channel, A SCSI ID 7, B SCSI ID 7, 4/255 SCBs (scsi0) Downloading sequencer code... 426 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0 Vendor: IBM Model: DCAS-34330W Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 (scsi0:0:1:0) Synchronous at 10.0 Mbyte/sec, offset 15. Vendor: COMPAQ Model: ST32171W Rev: 0388 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SONY Model: CD-ROM CDU-76S Rev: 1.1c Type: CD-ROM ANSI SCSI revision: 02 Vendor: HP Model: C1533A Rev: A708 Type: Sequential-Access ANSI SCSI revision: 02 Vendor: Quantum Model: XP32150W Rev: L912 Type: Direct-Access ANSI SCSI revision: 02 Vendor: IBM Model: DCAS-34330W Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 Attached scsi disk sdc at scsi0, channel 1, id 0, lun 0 Attached scsi disk sdd at scsi0, channel 1, id 1, lun 0 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. SCSI device sda: 8467200 512-byte hdwr sectors (4335 MB) sda: sda1 sda4 SCSI device sdb: 4110000 512-byte hdwr sectors (2104 MB) sdb: sdb1 sdb2 < sdb5 sdb6 > (scsi0:1:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. SCSI device sdc: 4406960 512-byte hdwr sectors (2256 MB) sdc: sdc1 (scsi0:1:1:0) Synchronous at 10.0 Mbyte/sec, offset 15. SCSI device sdd: 8467200 512-byte hdwr sectors (4335 MB) sdd: sdd1 =2E. and the CPU: processor : 0 vendor_id : GenuineIntel cpu family : 5 model : 2 model name : Pentium 75 - 200 stepping : 12 cpu MHz : 133.335 fdiv_bug : no hlt_bug : no f00f_bug : yes coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr mce cx8 bogomips : 265.42 =2E. and iomem: 00000000-0009efff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000c8000-000cffff : Extension ROM 000f0000-000fffff : System ROM 00100000-03ffffff : System RAM 00100000-0024007f : Kernel code 00240080-00256a6b : Kernel data fecff000-fecfffff : Intel Corporation 82557 [Ethernet Pro 100] fecff000-fecfffff : eepro100 fed00000-fedfffff : Intel Corporation 82557 [Ethernet Pro 100] =2E. and ioports: 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 02f8-02ff : serial(auto) 03b0-03bf : ega 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cfb : PCI conf2 bc00-bcfe : aic7xxx fce0-fcff : Intel Corporation 82557 [Ethernet Pro 100] fce0-fcff : eepro100 =2E. and interrupts: CPU0 =20 0: 7781679 XT-PIC timer 1: 21 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 11: 66644 XT-PIC eth0 12: 0 XT-PIC PS/2 Mouse 14: 12 XT-PIC ide0 15: 85576 XT-PIC aic7xxx NMI: 0=20 ERR: 0 I really hope that this is enough info, just let me know if there is someth= ing I'm missing. If needed, I can try to pin down when this problem started to happen (which= is somewhere 2.4.7=20 and 2.4.22), I'll do so if requested. Thank you very much,=20 best regards,=20 Gudmundur D. Haraldsson. --=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D | Gu=F0mundur D. Haraldsson | When you have eliminated the im= possible,| | gdh@binhex.EU.org | what ever remains, however improb= able, | | http://www.binhex.EU.org/ | must be the truth. | | | - Sherlock Holmes, "The sign of f= our" | |--------------------------------------------------------------------------= -------| | GPG key: lynx -dump http://vlug.eyjar.is/gdh/gpgkey.asc | gpg --import = | | Key fingerprint =3D DE6D A875 EA92 0699 9B49 8C49 2DBB 76BF ADD4 C933 = | =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D // Spammers will be asphyxiated in pat=E9! --h31gzZEtNLTqOjlF Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFARksILbt2v63UyTMRAulGAKC9dh3Ar8+E10QBSMQuGzr3nbuaUgCeMYPh h3uQFjv73Dk3gmbIdc+6vU4= =FNE4 -----END PGP SIGNATURE----- --h31gzZEtNLTqOjlF--