Re: 2.6.3 BUG - can't write DVD-RAM - reported as write-protected

[Jens Axboe <axboe@suse.de>]

On Tue, Mar 09 2004, Olaf Fr?czyk wrote:
> On Sun, 2004-03-07 at 11:59, Jens Axboe wrote:
> > On Fri, Mar 05 2004, Olaf Fr?czyk wrote:
> > > On Fri, 2004-03-05 at 09:23, Jens Axboe wrote:
> > > > On Thu, Mar 04 2004, Olaf Fr?czyk wrote:
> > > > > Hi,
> > > > > I switched to 2.6.3 from 2.4.x serie.
> > > > > When I mount DVD-RAM it is mounted read-only:
> > > > > 
> > > > > [root@venus olaf]# mount /dev/dvdram /mnt/dvdram
> > > > > mount: block device /dev/dvdram is write-protected, mounting read-only
> > > > > [root@venus olaf]#
> > > > > 
> > > > > In 2.4 it is mounted correctly as read-write.
> > > > > 
> > > > > Drive: Panasonic LF-201, reported in Linux as:
> > > > > MATSHITA        DVD-RAM LF-D200         A120
> > > > > 
> > > > > SCSI controller: Adaptec 2940U2W
> > > > 
> > > > What does cat /proc/sys/dev/cdrom/info say? Do you get any kernel
> > > > messages in dmesg when the rw mount fails?
> > > 
> > > I get nothing in /var/log/dmesg and in /var/log/messages
> > > In /proc/sys/dev/cdrom/info I get:
> > > [olaf@venus olaf]$ cat /proc/sys/dev/cdrom/info
> > > CD-ROM information, Id: cdrom.c 3.20 2003/12/17
> > >  
> > > drive name:             sr1     sr0     hdc
> > > drive speed:            0       16      44
> > > drive # of slots:       1       1       1
> > > Can close tray:         1       1       1
> > > Can open tray:          1       1       1
> > > Can lock tray:          1       1       1
> > > Can change speed:       1       1       1
> > > Can select disk:        0       0       0
> > > Can read multisession:  1       1       1
> > > Can read MCN:           1       1       1
> > > Reports media changed:  1       1       1
> > > Can play audio:         1       1       1
> > > Can write CD-R:         0       1       1
> > > Can write CD-RW:        0       1       1
> > > Can read DVD:           1       0       0
> > > Can write DVD-R:        0       0       0
> > > Can write DVD-RAM:      1       0       0
> > > Can read MRW:           0       0       1
> > > Can write MRW:          0       0       1
> > > 
> > > The one I'm mounting is /dev/scd1.
> > > As there is capablity to write-protect DVD-RAM disk (like a 1.44"
> > > Floppy), I think that the linux kernel interprets some message from
> > > device in wrong way.
> > 
> > Please repeat with this patch applied and send back the results, thanks.
> > 
> > ===== drivers/cdrom/cdrom.c 1.48 vs edited =====
> > --- 1.48/drivers/cdrom/cdrom.c	Mon Feb  9 21:58:21 2004
> > +++ edited/drivers/cdrom/cdrom.c	Sun Mar  7 11:58:40 2004
> > @@ -645,9 +645,12 @@
> >  {
> >  	disc_information di;
> >  
> > -	if (cdrom_get_disc_info(cdi, &di))
> > +	if (cdrom_get_disc_info(cdi, &di)) {
> > +		printk("cdrom: read di failed\n");
> >  		return 0;
> > +	}
> >  
> > +	printk("cdrom: erasable: %d\n", di.erasable);
> >  	return di.erasable;
> >  }
> >  
> I get:
> cdrom: read di failed

Can you try to instrument drivers/cdrom/cdrom.c:cdrom_get_disc_info()
and find out where it fails? Change the cgc.quiet = 1 to a = 0 in there
as well (that alone might be enough to pin point the problem).

-- 
Jens Axboe