From: Frank Fiene <ffiene@veka.com>
To: linux-kernel@vger.kernel.org
Subject: IBM Thinkpad with docking station
Date: Thu, 11 Mar 2004 07:04:33 +0100 [thread overview]
Message-ID: <200403110704.34054.ffiene@veka.com> (raw)
In-Reply-To: <404F2EA1.8030702@softhome.net>
Hi, i've problem with my Thinkpad A31p, USB and docking station.
Without the docking station, USB is working fine, if i plugin my
notebook, following errors occur (i remember, that before upgrading to
2.6.3 only one port could be used and with windoze both ports are ok):
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: unknown reserved power switching mode
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Port indicators are not supported
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: hub controller current requirement: 0mA
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: enabling power on all ports
hub 1-0:1.0: port 1, status 101, change 1, 12 Mb/s
uhci_hcd 0000:00:1d.1: root hub device address 1
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: unknown reserved power switching mode
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: Port indicators are not supported
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: hub controller current requirement: 0mA
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: enabling power on all ports
hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101
uhci_hcd 0000:00:1d.2: root hub device address 1
hub 1-0:1.0: port 1 not reset yet, waiting 50ms
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: unknown reserved power switching mode
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: Port indicators are not supported
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: hub controller current requirement: 0mA
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
hub 3-0:1.0: enabling power on all ports
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not enabled, trying reset again...
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not enabled, trying reset again...
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not enabled, trying reset again...
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not enabled, trying reset again...
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not reset yet, waiting 200ms
hub 1-0:1.0: port 1 not enabled, trying reset again...
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
--
uniorg Solutions GmbH - Märkische Strasse 237 - 44141 Dortmund
ffiene@veka.com - Tel:0231-9497-262
--
Ein Unternehmen der uniorg-Gruppe
next prev parent reply other threads:[~2004-03-11 6:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-10 12:27 stack allocation and gcc Ihar 'Philips' Filipau
2004-03-10 12:55 ` Jaco Kroon
2004-03-10 13:15 ` Bart Hartgers
2004-03-10 13:21 ` Richard B. Johnson
2004-03-10 15:05 ` Ihar 'Philips' Filipau
2004-03-11 6:04 ` Frank Fiene [this message]
2004-03-10 14:25 ` Ihar 'Philips' Filipau
[not found] ` <200403101344.37171.baldrick@free.fr>
2004-03-10 14:06 ` Ihar 'Philips' Filipau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200403110704.34054.ffiene@veka.com \
--to=ffiene@veka.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox