From: Lech Szychowski <lech.szychowski@pse.pl>
To: linux-kernel@vger.kernel.org
Subject: Re: bcm5700 driver at 100Mbit? tg3 doesn't do 100Mbit - 2.6.4-mm1
Date: Sun, 14 Mar 2004 14:24:56 +0100 [thread overview]
Message-ID: <20040314132456.GA14249@lech.pse.pl> (raw)
In-Reply-To: <20040314123014.GA8839@merlin.emma.line.org>
> > tg3.ko loads, network starts up. Can't connect to 100Mbit network
> > switch. The bcm5700 driver in ths SuSE kraxel 2.6.3 kernel works. The
> > tg3 is supposed to be a replacement for bcm5700 I believe.
Works for me (Dell Latitude D600), both for "NIC to switch"...
===
Mar 12 16:20:37 y kernel: Linux version 2.6.4-mm1 (lech7@y) (gcc version 3.3.3) #1 Thu Mar 11 14:16:54 CET 2004
[...]
Mar 12 16:20:37 y kernel: eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0d:56:7b:d8:9d
[...]
Mar 12 16:20:39 y kernel: tg3: eth0: Link is up at 100 Mbps, half duplex.
Mar 12 16:20:39 y kernel: tg3: eth0: Flow control is off for TX and off for RX.
===
...and "NIC to NIC" mode:
===
Mar 14 03:43:08 y kernel: Linux version 2.6.4-mm1 (lech7@y) (gcc version 3.3.3) #1 Thu Mar 11 14:16:54 CET 2004
[...]
Mar 14 03:43:08 y kernel: eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0d:56:7b:d8:9d
[...]
Mar 14 03:43:10 y kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
Mar 14 03:43:10 y kernel: tg3: eth0: Flow control is off for TX and off for RX.
===
--
Leszek.
-- lech7@pse.pl 2:480/33.7 -- REAL programmers use INTEGERS --
-- speaking just for myself...
next prev parent reply other threads:[~2004-03-14 13:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-14 6:00 bcm5700 driver at 100Mbit? tg3 doesn't do 100Mbit - 2.6.4-mm1 Sid Boyce
2004-03-14 12:30 ` Matthias Andree
2004-03-14 13:24 ` Lech Szychowski [this message]
[not found] ` <Pine.LNX.4.58.0403140322430.9920@puma.cabm.rutgers.edu>
2004-03-14 15:52 ` Sid Boyce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040314132456.GA14249@lech.pse.pl \
--to=lech.szychowski@pse.pl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox