* Linux 2.4.25: USB problems ("device not accepting new address")
@ 2004-03-20 11:05 Johannes Resch
2004-03-20 19:53 ` Greg KH
0 siblings, 1 reply; 4+ messages in thread
From: Johannes Resch @ 2004-03-20 11:05 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1463 bytes --]
Hello,
I've got the problem that the USB mouse device will cease responding after
some time. "dmesg" then shows:
usb-uhci.c: interrupt, status 2, frame# 699
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:1d.1-2, assigned address 3
usb.c: USB device not accepting new address=3 (error=-110)
Sometimes, doing a rmmod/insmod-cycle on "usb-uhci" and "hid" helps
re-enabling the USB device.
Googling turned up lots of similar problem reports (some dating back to
2.4.9) - but no solutions, as it seems to me.
I already tried various USB mouse devices (known to work flawlessly with
other OS), so I think a hardware problem is unlikely.
I've come over this problem on two computers (one with Via KT266, the
other one with Intel ICH3M chipset), with the only similarities
"USB-uhci" and "USB mouse device".
This problem is not new, I already experienced it since I started using
USB devices with linux (2.4.18?).
While it occurs maybe 1-2 times/month on the computer with VIA chipset, it
seems to happen much more frequently on the notebook with ICH3M (after a
few hours usage).
This problem happens regardless of USB support being compiled in
statically or as modules.
Attached is dmesg boot output and output of dmesg after doing rmmod/insmod
with no success.
The corresponding kernel .config is available at
"http://xor.at/files/kernel-2.4.25-config".
best regards,
Johannes Resch
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 19895 bytes --]
Mar 20 08:35:10 medusa kernel: klogd 1.4.1#13, log source = /proc/kmsg started.
Mar 20 08:35:10 medusa kernel: Inspecting /boot/System.map-2.4.25-grsec
Mar 20 08:35:10 medusa kernel: Loaded 21563 symbols from /boot/System.map-2.4.25-grsec.
Mar 20 08:35:10 medusa kernel: Symbols match kernel version 2.4.25.
Mar 20 08:35:10 medusa kernel: Loaded 265 symbols from 18 modules.
Mar 20 08:35:10 medusa kernel: Linux version 2.4.25-grsec (root@sirius) (gcc version 3.3.3 (Debian)) #1 Sam Feb 21 20:35:54 CET 2004
Mar 20 08:35:10 medusa kernel: BIOS-provided physical RAM map:
Mar 20 08:35:10 medusa kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 20 08:35:10 medusa kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 20 08:35:10 medusa kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 20 08:35:10 medusa kernel: BIOS-e820: 0000000000100000 - 000000001ffe0000 (usable)
Mar 20 08:35:10 medusa kernel: BIOS-e820: 000000001ffe0000 - 000000001fff0000 (reserved)
Mar 20 08:35:10 medusa kernel: BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
Mar 20 08:35:10 medusa kernel: BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
Mar 20 08:35:10 medusa kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Mar 20 08:35:10 medusa kernel: 511MB LOWMEM available.
Mar 20 08:35:10 medusa kernel: ACPI: have wakeup address 0xc0001000
Mar 20 08:35:10 medusa kernel: On node 0 totalpages: 131040
Mar 20 08:35:10 medusa kernel: zone(0): 4096 pages.
Mar 20 08:35:10 medusa kernel: zone(1): 126944 pages.
Mar 20 08:35:10 medusa kernel: zone(2): 0 pages.
Mar 20 08:35:10 medusa kernel: ACPI: RSDP (v000 ) @ 0x000fe030
Mar 20 08:35:10 medusa kernel: ACPI: RSDT (v001 REX 0x00000001 0x00000000) @ 0x1fff0000
Mar 20 08:35:10 medusa kernel: ACPI: FADT (v001 REX 0x00000001 0x00000000) @ 0x1fff0054
Mar 20 08:35:10 medusa kernel: ACPI: BOOT (v001 REX 0x00000001 0x00000000) @ 0x1fff002c
Mar 20 08:35:10 medusa kernel: ACPI: DSDT (v001 AOPEN REX 0x00001000 MSFT 0x0100000d) @ 0x00000000
Mar 20 08:35:10 medusa kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hdc=ide-scsi
Mar 20 08:35:10 medusa kernel: ide_setup: hdc=ide-scsi
Mar 20 08:35:10 medusa kernel: Local APIC disabled by BIOS -- reenabling.
Mar 20 08:35:10 medusa kernel: Found and enabled local APIC!
Mar 20 08:35:10 medusa kernel: Initializing CPU#0
Mar 20 08:35:10 medusa kernel: Detected 1199.893 MHz processor.
Mar 20 08:35:10 medusa kernel: Console: colour VGA+ 80x25
Mar 20 08:35:10 medusa kernel: Calibrating delay loop... 2392.06 BogoMIPS
Mar 20 08:35:10 medusa kernel: Memory: 514872k/524160k available (2246k kernel code, 8900k reserved, 303k data, 100k init, 0k highmem)
Mar 20 08:35:10 medusa kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Mar 20 08:35:10 medusa kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar 20 08:35:10 medusa kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Mar 20 08:35:10 medusa kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 20 08:35:10 medusa kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 20 08:35:10 medusa kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 20 08:35:10 medusa kernel: CPU: L2 cache: 512K
Mar 20 08:35:10 medusa kernel: Intel machine check architecture supported.
Mar 20 08:35:10 medusa kernel: Intel machine check reporting enabled on CPU#0.
Mar 20 08:35:10 medusa kernel: CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
Mar 20 08:35:10 medusa kernel: CPU: Common caps: 0383fbff 00000000 00000000 00000000
Mar 20 08:35:10 medusa kernel: CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz stepping 01
Mar 20 08:35:10 medusa kernel: Enabling fast FPU save and restore... done.
Mar 20 08:35:10 medusa kernel: Enabling unmasked SIMD FPU exception support... done.
Mar 20 08:35:10 medusa kernel: Checking 'hlt' instruction... OK.
Mar 20 08:35:10 medusa kernel: POSIX conformance testing by UNIFIX
Mar 20 08:35:10 medusa kernel: enabled ExtINT on CPU#0
Mar 20 08:35:10 medusa kernel: ESR value before enabling vector: 00000000
Mar 20 08:35:10 medusa kernel: ESR value after enabling vector: 00000000
Mar 20 08:35:10 medusa kernel: Using local APIC timer interrupts.
Mar 20 08:35:10 medusa kernel: calibrating APIC timer ...
Mar 20 08:35:10 medusa kernel: ..... CPU clock speed is 1199.9020 MHz.
Mar 20 08:35:10 medusa kernel: ..... host bus clock speed is 133.3222 MHz.
Mar 20 08:35:10 medusa kernel: cpu: 0, clocks: 1333222, slice: 666611
Mar 20 08:35:10 medusa kernel: CPU0<T0:1333216,T1:666592,D:13,S:666611,C:1333222>
Mar 20 08:35:10 medusa kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Mar 20 08:35:10 medusa kernel: mtrr: detected mtrr type: Intel
Mar 20 08:35:10 medusa kernel: ACPI: Subsystem revision 20040211
Mar 20 08:35:10 medusa kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=2
Mar 20 08:35:10 medusa kernel: PCI: Using configuration type 1
Mar 20 08:35:10 medusa kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
Mar 20 08:35:10 medusa kernel: ACPI: Interpreter enabled
Mar 20 08:35:10 medusa kernel: ACPI: Using PIC for interrupt routing
Mar 20 08:35:10 medusa kernel: ACPI: System [ACPI] (supports S0 S1 S3 S4bios S4 S5)
Mar 20 08:35:10 medusa kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Mar 20 08:35:10 medusa kernel: PCI: Probing PCI hardware (bus 00)
Mar 20 08:35:10 medusa kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Mar 20 08:35:10 medusa kernel: Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 *11 12 14 15)
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 *10 12 14 15)
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 11 12 14 15)
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILD] (IRQs 3 4 5 6 *11 12 14 15)
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 *10 12 14 15)
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 *11 12 14 15)
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 *11 12 14 15)
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 *11 12 14 15)
Mar 20 08:35:10 medusa kernel: ACPI: Embedded Controller [EC0] (gpe 29)
Mar 20 08:35:10 medusa kernel: PCI: Probing PCI hardware
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILA] enabled at IRQ 11
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILD] enabled at IRQ 11
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILC] enabled at IRQ 11
Mar 20 08:35:10 medusa kernel: PCI: No IRQ known for interrupt pin A of device 00:1f.1 - using IRQ 255
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILB] enabled at IRQ 10
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILF] enabled at IRQ 11
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILE] enabled at IRQ 10
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILG] enabled at IRQ 11
Mar 20 08:35:10 medusa kernel: ACPI: PCI Interrupt Link [PILH] enabled at IRQ 11
Mar 20 08:35:10 medusa kernel: PCI: Using ACPI for IRQ routing
Mar 20 08:35:10 medusa kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Mar 20 08:35:10 medusa kernel: Linux NET4.0 for Linux 2.4
Mar 20 08:35:10 medusa kernel: Based upon Swansea University Computer Society NET3.039
Mar 20 08:35:10 medusa kernel: Initializing RT netlink socket
Mar 20 08:35:10 medusa kernel: Starting kswapd
Mar 20 08:35:10 medusa kernel: VFS: Disk quotas vdquot_6.5.1
Mar 20 08:35:10 medusa kernel: SGI XFS with no debug enabled
Mar 20 08:35:10 medusa kernel: SGI XFS Quota Management subsystem
Mar 20 08:35:10 medusa kernel: pty: 256 Unix98 ptys configured
Mar 20 08:35:10 medusa kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Mar 20 08:35:10 medusa kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Mar 20 08:35:10 medusa kernel: Floppy drive(s): fd0 is 1.44M
Mar 20 08:35:10 medusa kernel: FDC 0 is a post-1991 82077
Mar 20 08:35:10 medusa kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Mar 20 08:35:10 medusa kernel: loop: loaded (max 8 devices)
Mar 20 08:35:10 medusa kernel: 8139too Fast Ethernet driver 0.9.26
Mar 20 08:35:10 medusa kernel: eth0: RealTek RTL8139 at 0xe080f000, 00:00:e2:70:69:42, IRQ 10
Mar 20 08:35:10 medusa kernel: eth0: Identified 8139 chip type 'RTL-8139C'
Mar 20 08:35:10 medusa kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Mar 20 08:35:10 medusa kernel: agpgart: Maximum main memory to use for agp memory: 439M
Mar 20 08:35:10 medusa kernel: agpgart: Detected Intel(R) 830M chipset
Mar 20 08:35:10 medusa kernel: agpgart: AGP aperture is 256M @ 0xe0000000
Mar 20 08:35:10 medusa kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Mar 20 08:35:10 medusa kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 20 08:35:10 medusa kernel: ICH3M: IDE controller at PCI slot 00:1f.1
Mar 20 08:35:10 medusa kernel: PCI: No IRQ known for interrupt pin A of device 00:1f.1 - using IRQ 255
Mar 20 08:35:10 medusa kernel: ICH3M: chipset revision 1
Mar 20 08:35:10 medusa kernel: ICH3M: not 100%% native mode: will probe irqs later
Mar 20 08:35:10 medusa kernel: ide0: BM-DMA at 0xd450-0xd457, BIOS settings: hda:DMA, hdb:pio
Mar 20 08:35:10 medusa kernel: ide1: BM-DMA at 0xd458-0xd45f, BIOS settings: hdc:DMA, hdd:pio
Mar 20 08:35:10 medusa kernel: hda: FUJITSU MHR2040AT, ATA DISK drive
Mar 20 08:35:10 medusa kernel: blk: queue c0173c20, I/O limit 4095Mb (mask 0xffffffff)
Mar 20 08:35:10 medusa kernel: hdc: SONY CD-RW/DVD-ROM CRX810E, ATAPI CD/DVD-ROM drive
Mar 20 08:35:10 medusa kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 20 08:35:10 medusa kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 20 08:35:10 medusa kernel: hda: attached ide-disk driver.
Mar 20 08:35:10 medusa kernel: hda: host protected area => 1
Mar 20 08:35:10 medusa kernel: hda: 78140160 sectors (40008 MB) w/2048KiB Cache, CHS=4864/255/63, UDMA(100)
Mar 20 08:35:10 medusa kernel: hdc: attached ide-scsi driver.
Mar 20 08:35:10 medusa kernel: Partition check:
Mar 20 08:35:10 medusa kernel: hda: hda1 hda2 hda3
Mar 20 08:35:10 medusa kernel: SCSI subsystem driver Revision: 1.00
Mar 20 08:35:10 medusa kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Mar 20 08:35:10 medusa kernel: Vendor: SONY Model: CD-RW CRX810E Rev: 1.0a
Mar 20 08:35:10 medusa kernel: Type: CD-ROM ANSI SCSI revision: 02
Mar 20 08:35:10 medusa kernel: Linux Kernel Card Services 3.1.22
Mar 20 08:35:10 medusa kernel: options: [pci] [cardbus] [pm]
Mar 20 08:35:10 medusa kernel: PCI: Enabling device 02:07.0 (0000 -> 0002)
Mar 20 08:35:10 medusa kernel: usb.c: registered new driver usbdevfs
Mar 20 08:35:10 medusa kernel: usb.c: registered new driver hub
Mar 20 08:35:10 medusa kernel: Yenta ISA IRQ mask 0x0000, PCI irq 11
Mar 20 08:35:10 medusa kernel: Socket status: 30000011
Mar 20 08:35:10 medusa kernel: ti113x: Routing card interrupts to PCI
Mar 20 08:35:10 medusa kernel: Yenta ISA IRQ mask 0x00b8, PCI irq 11
Mar 20 08:35:10 medusa kernel: Socket status: 30000007
Mar 20 08:35:10 medusa kernel: mice: PS/2 mouse device common for all mice
Mar 20 08:35:10 medusa kernel: Initializing Cryptographic API
Mar 20 08:35:10 medusa kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 20 08:35:10 medusa kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Mar 20 08:35:10 medusa kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Mar 20 08:35:10 medusa kernel: TCP: Hash tables configured (established 32768 bind 65536)
Mar 20 08:35:10 medusa kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 20 08:35:10 medusa kernel: reiserfs: found format "3.6" with standard journal
Mar 20 08:35:10 medusa kernel: reiserfs: checking transaction log (device ide0(3,1)) ...
Mar 20 08:35:10 medusa kernel: for (ide0(3,1))
Mar 20 08:35:10 medusa kernel: ide0(3,1):Using r5 hash to sort names
Mar 20 08:35:10 medusa kernel: VFS: Mounted root (reiserfs filesystem) readonly.
Mar 20 08:35:10 medusa kernel: Freeing unused kernel memory: 100k freed
Mar 20 08:35:10 medusa kernel: grsec: mount proc to /proc by (mount:885) UID(0) EUID(0), parent (S02mountvirtfs:32269) UID(0) EUID(0)
Mar 20 08:35:10 medusa kernel: grsec: mount devpts to /dev/pts by (mount:27506) UID(0) EUID(0), parent (S02mountvirtfs:32269) UID(0) EUID(0)
Mar 20 08:35:10 medusa kernel: grsec: mount tmpfs to /dev/shm by (mount:22304) UID(0) EUID(0), parent (S02mountvirtfs:32269) UID(0) EUID(0)
Mar 20 08:35:10 medusa kernel: grsec: mount usbfs to /proc/bus/usb by (mount:1806) UID(0) EUID(0), parent (S02mountvirtfs:32269) UID(0) EUID(0)
Mar 20 08:35:10 medusa kernel: Adding Swap: 489972k swap-space (priority -1)
Mar 20 08:35:10 medusa kernel: grsec: mount /dev/hda1 to / by (mount:19723) UID(0) EUID(0), parent (rcS:2334) UID(0) EUID(0)
Mar 20 08:35:10 medusa kernel: Real Time Clock Driver v1.10f
Mar 20 08:35:10 medusa kernel: grsec: time set by (hwclock:18579) UID(0) EUID(0), parent (rcS:16831) UID(0) EUID(0)
Mar 20 08:35:10 medusa kernel: grsec: time set by (hwclock:26872) UID(0) EUID(0), parent (rcS:16831) UID(0) EUID(0)
Mar 20 08:35:10 medusa kernel: usb-uhci.c: $Revision: 1.275 $ time 20:47:35 Feb 21 2004
Mar 20 08:35:10 medusa kernel: usb-uhci.c: High bandwidth mode enabled
Mar 20 08:35:10 medusa kernel: PCI: Setting latency timer of device 00:1d.0 to 64
Mar 20 08:35:10 medusa kernel: usb-uhci.c: USB UHCI at I/O 0xd040, IRQ 11
Mar 20 08:35:10 medusa kernel: usb-uhci.c: Detected 2 ports
Mar 20 08:35:10 medusa kernel: usb.c: new USB bus registered, assigned bus number 1
Mar 20 08:35:10 medusa kernel: hub.c: USB hub found
Mar 20 08:35:10 medusa kernel: hub.c: 2 ports detected
Mar 20 08:35:10 medusa kernel: PCI: Setting latency timer of device 00:1d.1 to 64
Mar 20 08:35:10 medusa kernel: usb-uhci.c: USB UHCI at I/O 0xd080, IRQ 11
Mar 20 08:35:10 medusa kernel: usb-uhci.c: Detected 2 ports
Mar 20 08:35:10 medusa kernel: usb.c: new USB bus registered, assigned bus number 2
Mar 20 08:35:10 medusa kernel: hub.c: USB hub found
Mar 20 08:35:10 medusa kernel: hub.c: 2 ports detected
Mar 20 08:35:10 medusa kernel: PCI: Setting latency timer of device 00:1d.2 to 64
Mar 20 08:35:10 medusa kernel: usb-uhci.c: USB UHCI at I/O 0xd0c0, IRQ 11
Mar 20 08:35:10 medusa kernel: usb-uhci.c: Detected 2 ports
Mar 20 08:35:10 medusa kernel: usb.c: new USB bus registered, assigned bus number 3
Mar 20 08:35:10 medusa kernel: hub.c: USB hub found
Mar 20 08:35:10 medusa kernel: hub.c: 2 ports detected
Mar 20 08:35:10 medusa kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Mar 20 08:35:10 medusa kernel: Initializing USB Mass Storage driver...
Mar 20 08:35:10 medusa kernel: usb.c: registered new driver usb-storage
Mar 20 08:35:10 medusa kernel: USB Mass Storage support registered.
Mar 20 08:35:10 medusa kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Mar 20 08:35:10 medusa kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Mar 20 08:35:10 medusa kernel: Uniform CD-ROM driver Revision: 3.12
Mar 20 08:35:10 medusa kernel: ACPI: Power Button (FF) [PWRF]
Mar 20 08:35:10 medusa kernel: ACPI: Sleep Button (CM) [SLPB]
Mar 20 08:35:10 medusa kernel: ACPI: Lid Switch [LID]
Mar 20 08:35:10 medusa kernel: ACPI: Processor [CPU0] (supports C1 C2 C3, 2 performance states)
Mar 20 08:35:10 medusa kernel: ACPI: AC Adapter [AC] (on-line)
Mar 20 08:35:10 medusa kernel: hub.c: new USB device 00:1d.1-2, assigned address 2
Mar 20 08:35:10 medusa kernel: usb.c: USB device 2 (vend/prod 0x46d/0xc000) is not claimed by any active driver.
Mar 20 08:35:10 medusa kernel: ACPI: Battery Slot [BAT0] (battery absent)
Mar 20 08:35:10 medusa kernel: ACPI: Battery Slot [BAT2] (battery absent)
Mar 20 08:35:10 medusa kernel: ACPI: Thermal Zone [THR1] (27 C)
Mar 20 08:35:10 medusa kernel: ACPI: Thermal Zone [THR2] (27 C)
Mar 20 08:35:10 medusa kernel: CSLIP: code copyright 1989 Regents of the University of California
Mar 20 08:35:10 medusa kernel: PPP generic driver version 2.4.2
Mar 20 08:35:10 medusa kernel: MPPE/MPPC encryption/compression module registered
Mar 20 08:35:10 medusa kernel: usb.c: registered new driver hiddev
Mar 20 08:35:10 medusa kernel: usb.c: registered new driver hid
Mar 20 08:35:10 medusa kernel: input: USB HID v1.00 Mouse [Logitech] on usb2:2.0
Mar 20 08:35:10 medusa kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Mar 20 08:35:10 medusa kernel: hid-core.c: USB HID support drivers
Mar 20 08:35:10 medusa kernel: Intel 810 + AC97 Audio, version 0.24, 20:47:16 Feb 21 2004
Mar 20 08:35:10 medusa kernel: PCI: Setting latency timer of device 00:1f.5 to 64
Mar 20 08:35:10 medusa kernel: i810: Intel ICH3 found at IO 0xc400 and 0xc000, MEM 0x0000 and 0x0000, IRQ 10
Mar 20 08:35:10 medusa kernel: i810_audio: Audio Controller supports 6 channels.
Mar 20 08:35:10 medusa kernel: i810_audio: Defaulting to base 2 channel mode.
Mar 20 08:35:10 medusa kernel: i810_audio: Resetting connection 0
Mar 20 08:35:10 medusa kernel: ac97_codec: AC97 Audio codec, id: ALG16 (ALC200/200P)
Mar 20 08:35:10 medusa kernel: i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
Mar 20 08:35:10 medusa kernel: reiserfs: found format "3.6" with standard journal
Mar 20 08:35:10 medusa kernel: reiserfs: checking transaction log (device ide0(3,3)) ...
Mar 20 08:35:10 medusa kernel: for (ide0(3,3))
Mar 20 08:35:10 medusa kernel: ide0(3,3):Using r5 hash to sort names
Mar 20 08:35:10 medusa kernel: grsec: mount /dev/hda3 to /data by (mount:28117) UID(0) EUID(0), parent (rcS:30280) UID(0) EUID(0)
Mar 20 08:35:10 medusa kernel: eth0: link up, 10Mbps, half-duplex, lpa 0x0000
Mar 20 08:35:10 medusa kernel: grsec: time set by (hwclock:23807) UID(0) EUID(0), parent (rcS:4321) UID(0) EUID(0)
Mar 20 08:35:10 medusa kernel: grsec: time set by (ntpdate:20261) UID(0) EUID(0), parent (S51ntpdate:30740) UID(0) EUID(0)
Mar 20 08:35:11 medusa kernel: grsec: mount none to /proc/sys/fs/binfmt_misc by (mount:131) UID(0) EUID(0), parent (update-binfmts:1067) UID(0) EUID(0)
Mar 20 08:35:14 medusa kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
Mar 20 08:35:14 medusa kernel: lp0: using parport0 (polling).
Mar 20 08:35:15 medusa kernel: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
Mar 20 08:35:15 medusa kernel: hermes.c: 4 Dec 2002 David Gibson <hermes@gibson.dropbear.id.au>
Mar 20 08:35:15 medusa kernel: orinoco.c 0.13d (David Gibson <hermes@gibson.dropbear.id.au> and others)
Mar 20 08:35:16 medusa kernel: orinoco_cs.c 0.13d (David Gibson <hermes@gibson.dropbear.id.au> and others)
Mar 20 08:35:16 medusa kernel: eth1: Station identity 001f:0001:0008:000a
Mar 20 08:35:16 medusa kernel: eth1: Looks like a Lucent/Agere firmware version 8.10
Mar 20 08:35:16 medusa kernel: eth1: Ad-hoc demo mode supported
Mar 20 08:35:16 medusa kernel: eth1: IEEE standard IBSS ad-hoc mode supported
Mar 20 08:35:16 medusa kernel: eth1: WEP supported, 104-bit key
Mar 20 08:35:16 medusa kernel: eth1: MAC address 00:02:2D:5D:7E:A9
Mar 20 08:35:16 medusa kernel: eth1: Station name "HERMES I"
Mar 20 08:35:16 medusa kernel: eth1: ready
Mar 20 08:35:16 medusa kernel: eth1: index 0x01: Vcc 3.3, irq 11, io 0x0100-0x013f
[-- Attachment #3: dmesg_reload_modules --]
[-- Type: application/octet-stream, Size: 1528 bytes --]
usb-uhci.c: $Revision: 1.275 $ time 20:47:35 Feb 21 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xd040, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xd080, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd0c0, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1d.0-1, assigned address 2
usb-uhci.c: interrupt, status 2, frame# 543
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:1d.0-1, assigned address 3
usb.c: USB device not accepting new address=3 (error=-110)
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
hub.c: new USB device 00:1d.1-2, assigned address 2
usb-uhci.c: interrupt, status 2, frame# 699
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:1d.1-2, assigned address 3
usb.c: USB device not accepting new address=3 (error=-110)
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Linux 2.4.25: USB problems ("device not accepting new address")
2004-03-20 11:05 Linux 2.4.25: USB problems ("device not accepting new address") Johannes Resch
@ 2004-03-20 19:53 ` Greg KH
0 siblings, 0 replies; 4+ messages in thread
From: Greg KH @ 2004-03-20 19:53 UTC (permalink / raw)
To: Johannes Resch; +Cc: linux-kernel
On Sat, Mar 20, 2004 at 12:05:33PM +0100, Johannes Resch wrote:
> Hello,
>
> I've got the problem that the USB mouse device will cease responding after
> some time. "dmesg" then shows:
>
> usb-uhci.c: interrupt, status 2, frame# 699
> usb.c: USB device not accepting new address=2 (error=-110)
> hub.c: new USB device 00:1d.1-2, assigned address 3
> usb.c: USB device not accepting new address=3 (error=-110)
This is a PCI interrupt routing issue, not a USB issue. I suggest
disabing acpi if you do not need it. If you require acpi, then please
take this to the acpi mailing list, the people there will work with you
to solve it.
Good luck,
greg k-h
^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <A6974D8E5F98D511BB910002A50A6647615F5EC0@hdsmsx402.hd.intel.com>]
* Re: Linux 2.4.25: USB problems ("device not accepting new address")
[not found] <A6974D8E5F98D511BB910002A50A6647615F5EC0@hdsmsx402.hd.intel.com>
@ 2004-03-21 3:53 ` Len Brown
2004-03-21 7:39 ` Stian Jordet
0 siblings, 1 reply; 4+ messages in thread
From: Len Brown @ 2004-03-21 3:53 UTC (permalink / raw)
To: Greg KH; +Cc: Johannes Resch, linux-kernel
On Sat, 2004-03-20 at 14:53, Greg KH wrote:
> On Sat, Mar 20, 2004 at 12:05:33PM +0100, Johannes Resch wrote:
> > Hello,
> >
> > I've got the problem that the USB mouse device will cease responding
> after
> > some time. "dmesg" then shows:
> >
> > usb-uhci.c: interrupt, status 2, frame# 699
> > usb.c: USB device not accepting new address=2 (error=-110)
> > hub.c: new USB device 00:1d.1-2, assigned address 3
> > usb.c: USB device not accepting new address=3 (error=-110)
>
> This is a PCI interrupt routing issue, not a USB issue. I suggest
> disabing acpi if you do not need it. If you require acpi, then please
> take this to the acpi mailing list, the people there will work with
> you
> to solve it.
I didn't notice any configuration-time ACPI issues that would cause
USB to start failing after a few hours of use.
If the system runs properly with acpi=off or pci=noacpi,
but fails without it, please set me know
cc: acpi-devel@lists.sourceforge.net
thanks,
-Len
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-03-21 7:39 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-20 11:05 Linux 2.4.25: USB problems ("device not accepting new address") Johannes Resch
2004-03-20 19:53 ` Greg KH
[not found] <A6974D8E5F98D511BB910002A50A6647615F5EC0@hdsmsx402.hd.intel.com>
2004-03-21 3:53 ` Len Brown
2004-03-21 7:39 ` Stian Jordet
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox