* Unable to handle kernel paging request at virtual address 6e65704f
@ 2004-04-16 23:31 John Summerfield
0 siblings, 0 replies; only message in thread
From: John Summerfield @ 2004-04-16 23:31 UTC (permalink / raw)
To: Linux-Kernel
I'm not at all sure that I have this entirely straight.
The problem.
I get very many segfaults and oopses. I suspect there is a problem in the
hardware, but before I scrap the system I'd like someone who can
authoratatively distinguish between bad hardware and bad software has a look
to see whether they can diagnose the problem.
If the hardware's bad, then at least it's good enough to run long enough to do
useful testing, and bad enough to fail often enough to be really useful for
testing error recovery: I get serious failures (requiring reset) every few
days, less serious ones (segfaults) more often:
Bilby:~# dmesg | ksymoops -k /proc/kallsyms -v /boot/vmlinuz-2.6.3-1-686 -m
/boot/System.map-2.6.3-1-686 >/tmp/oops1 2>&1
Segmentation fault
Bilby:~# dmesg | ksymoops -k /proc/kallsyms -v /boot/vmlinuz-2.6.3-1-686 -m
/boot/System.map-2.6.3-1-686 >/tmp/oops1 2>&1
Segmentation fault
Bilby:~# dmesg | ksymoops -k /proc/kallsyms -v /boot/vmlinuz-2.6.3-1-686 -m
/boot/System.map-2.6.3-1-686 >/tmp/oops1 2>&1
Bilby:~#
The environment.
I'm running Debian/Sarge in a Pentum III system:
Bilby:~# uname -a
Linux Bilby 2.6.3-1-686 #2 Tue Feb 24 20:24:38 EST 2004 i686 GNU/Linux
Bilby:~#
This is a standard Debian kernel.
I get similar problems with all the other Debian kernels I've tried, including
some 2.4.x.
Bilby:~# lspci -v
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
Flags: bus master, medium devsel, latency 64
Memory at f8000000 (32-bit, prefetchable)
Capabilities: [a0] AGP version 1.0
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
0000:00:0d.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev
26)
Subsystem: LSI Logic / Symbios Logic: Unknown device 1000
Flags: bus master, medium devsel, latency 72, IRQ 11
I/O ports at 1400
Memory at f4102000 (32-bit, non-prefetchable) [size=256]
Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 1
0000:00:0f.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100]
(rev 05)
Subsystem: Intel Corp. 82558 10/100 with Wake on LAN
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at f4103000 (32-bit, prefetchable)
I/O ports at 1060 [size=32]
Memory at f4000000 (32-bit, non-prefetchable) [size=1M]
0000:00:12.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
0000:00:12.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at 1050 [size=16]
0000:00:12.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at 1080 [size=32]
0000:00:12.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9
0000:00:14.0 VGA compatible controller: Cirrus Logic GD 5480 (rev 23) (prog-if
00 [VGA])
Subsystem: Intel Corp.: Unknown device 4945
Flags: bus master, medium devsel, latency 64
Memory at f6000000 (32-bit, prefetchable)
Memory at f4101000 (32-bit, non-prefetchable) [size=4K]
Bilby:~#
I'll provide a more verbose listing if anyone asks.
I have these SCSI devices:
-raw96r Write disk in RAW/RAW96R mode. This option will be
replaced Bilby:~# cdrecord -s -scanbus
Cdrecord-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to
<cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this
version.
Linux sg driver version: 3.5.30
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'QUANTUM ' 'ATLAS IV 9 WLS ' '0909' Disk
0,1,0 1) 'QUANTUM ' 'ATLAS IV 18 WLS ' '0909' Disk
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) 'SONY ' 'SDT-7000 ' '0300' Removable Tape
0,6,0 6) *
0,7,0 7) *
Bilby:~#
The tape is not in use.
/dev/hdc is a Creative CD-ROM CD4832E, my only IDE/ATA device, and not in use
at the relevant time.
These are the bits of dmidecode's report that seem to me most relevant. If
anyone asks, they can have the full report.
BIOS Information Block
Vendor: Intel Corporation
Version: NITELT0.86B.0044.P11.9910111055
Release: 10/11/99
BIOS base: 0xE0000
ROM size: 448K
Capabilities:
Flags: 0x000000007FE9DA90
Board Information Block
Vendor:
Product: NL440BX
Version: 700980-417
Serial Number: IMNL93701413
Processor
Socket Designation: J5C1
Processor Type: Central Processor
Processor Family: Pentium III processor
Processor Manufacturer: Intel Corporation
Processor Version: Intel(R) Pentium(R) III processor
It has 256 Mbytes of ECC RAM, but there's no DMI info about it.
The report.
The standard ksymoops options are wrong for this kernel. I've made my best
guess, but it doesn't seem entirely happy. I'm using this commandline:
ksymoops -k /proc/kallsyms -v /boot/vmlinuz-2.6.3-1-686 -m
/boot/System.map-2.6.3-1-686
ksymoops 2.4.9 on i686 2.6.3-1-686. Options used
-v /boot/vmlinuz-2.6.3-1-686 (specified)
-k /proc/kallsyms (specified)
-l /proc/modules (default)
-o /lib/modules/2.6.3-1-686/ (default)
-m /boot/System.map-2.6.3-1-686 (specified)
/usr/bin/nm: /boot/vmlinuz-2.6.3-1-686: File format not recognized
Error (pclose_local): read_nm_symbols pclose failed 0x100
Warning (read_vmlinux): no kernel symbols in vmlinux, is
/boot/vmlinuz-2.6.3-1-686 a valid vmlinux file?
Warning (read_ksyms): no kernel symbols in ksyms, is /proc/kallsyms a valid
ksyms file?
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Machine check exception polling timer started.
Receiver lock-up bug exists -- enabling work-around.
Unable to handle kernel paging request at virtual address 6e65704f
c0171b30
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c0171b30>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: c243fc14 ebx: 00027d2e ecx: 6e65704f edx: 6e65704f
esi: cf549400 edi: cfb0ef08 ebp: cf549400 esp: ce921e30
ds: 007b es: 007b ss: 0068
Stack: 00000000 ce920000 ca402c20 00027d2e c01721e2 cf549400 cfb0ef08 00027d2e
cfb0ef08 00027d2e ca402c20 cf549400 ca402c20 d08d7efb cf549400 00027d2e
c6f77ed4 fffffff4 cd02f4fc cd02f494 c0165c12 cd02f494 ca402c20 ce921f38
Call Trace:
[<c01721e2>] iget_locked+0x52/0xc0
[<d08d7efb>] ext3_lookup+0x6b/0xd0 [ext3]
[<c0165c12>] real_lookup+0xd2/0x100
[<c0165ea6>] do_lookup+0x96/0xb0
[<c016638d>] link_path_walk+0x4cd/0x950
[<c012fc65>] in_group_p+0x25/0x30
[<c0166d29>] __user_walk+0x49/0x60
[<c0161b1c>] vfs_lstat+0x1c/0x60
[<c016228b>] sys_lstat64+0x1b/0x40
[<c010b38b>] syscall_call+0x7/0xb
Code: 8b 11 0f 18 02 90 39 59 18 89 c8 74 13 85 d2 89 d1 75 ed 31
>>EIP; c0171b30 <find_inode_fast+20/70> <=====
>>eax; c243fc14 <__crc_udp_disconnect+8426e/44eb7f>
>>ecx; 6e65704f <__crc_input_grab_device+26387/f032a>
>>edx; 6e65704f <__crc_input_grab_device+26387/f032a>
>>esi; cf549400 <__crc_nf_unregister_hook+4e82fe/b96145>
>>edi; cfb0ef08 <__crc_nf_unregister_hook+aade06/b96145>
>>ebp; cf549400 <__crc_nf_unregister_hook+4e82fe/b96145>
>>esp; ce921e30 <__crc_unregister_serial+7dfcb/2c078b>
Trace; c01721e2 <iget_locked+52/c0>
Trace; d08d7efb <__crc_alloc_fddidev+820d0/19f023>
Trace; c0165c12 <real_lookup+d2/100>
Trace; c0165ea6 <do_lookup+96/b0>
Trace; c016638d <link_path_walk+4cd/950>
Trace; c012fc65 <in_group_p+25/30>
Trace; c0166d29 <__user_walk+49/60>
Trace; c0161b1c <vfs_lstat+1c/60>
Trace; c016228b <sys_lstat64+1b/40>
Trace; c010b38b <syscall_call+7/b>
Code; c0171b30 <find_inode_fast+20/70>
00000000 <_EIP>:
Code; c0171b30 <find_inode_fast+20/70> <=====
0: 8b 11 mov (%ecx),%edx <=====
Code; c0171b32 <find_inode_fast+22/70>
2: 0f 18 02 prefetchnta (%edx)
Code; c0171b35 <find_inode_fast+25/70>
5: 90 nop
Code; c0171b36 <find_inode_fast+26/70>
6: 39 59 18 cmp %ebx,0x18(%ecx)
Code; c0171b39 <find_inode_fast+29/70>
9: 89 c8 mov %ecx,%eax
Code; c0171b3b <find_inode_fast+2b/70>
b: 74 13 je 20 <_EIP+0x20>
Code; c0171b3d <find_inode_fast+2d/70>
d: 85 d2 test %edx,%edx
Code; c0171b3f <find_inode_fast+2f/70>
f: 89 d1 mov %edx,%ecx
Code; c0171b41 <find_inode_fast+31/70>
11: 75 ed jne 0 <_EIP>
Code; c0171b43 <find_inode_fast+33/70>
13: 31 00 xor %eax,(%eax)
Call Trace:
[<c011dcd6>] schedule+0x596/0x5a0
[<c014820b>] zap_pmd_range+0x4b/0x70
[<c014827b>] unmap_page_range+0x4b/0x80
[<c014847d>] unmap_vmas+0x1cd/0x230
[<c014c410>] exit_mmap+0x80/0x1a0
[<c011f715>] mmput+0x65/0x90
[<c01239ec>] do_exit+0x15c/0x410
[<c011ba30>] do_page_fault+0x0/0x52e
[<c010c451>] die+0xe1/0xf0
[<c011bc0e>] do_page_fault+0x1de/0x52e
[<d08d384e>] ext3_getblk+0xae/0x2a0 [ext3]
[<d089d6ca>] __journal_file_buffer+0x1aa/0x2b0 [jbd]
[<c015917f>] wake_up_buffer+0xf/0x30
[<c01591cc>] unlock_buffer+0x2c/0x50
[<d089bcc6>] do_get_write_access+0x2e6/0x620 [jbd]
[<c015cdec>] ll_rw_block+0x5c/0x90
[<d08d7b92>] ext3_find_entry+0x332/0x3f0 [ext3]
[<c011ba30>] do_page_fault+0x0/0x52e
[<c010bdb5>] error_code+0x2d/0x38
[<c0171b30>] find_inode_fast+0x20/0x70
[<c01721e2>] iget_locked+0x52/0xc0
[<d08d7efb>] ext3_lookup+0x6b/0xd0 [ext3]
[<c0165c12>] real_lookup+0xd2/0x100
[<c0165ea6>] do_lookup+0x96/0xb0
[<c016638d>] link_path_walk+0x4cd/0x950
[<c012fc65>] in_group_p+0x25/0x30
[<c0166d29>] __user_walk+0x49/0x60
[<c0161b1c>] vfs_lstat+0x1c/0x60
[<c016228b>] sys_lstat64+0x1b/0x40
[<c010b38b>] syscall_call+0x7/0xb
Warning (Oops_read): Code line not seen, dumping what data is available
Trace; c011dcd6 <schedule+596/5a0>
Trace; c014820b <zap_pmd_range+4b/70>
Trace; c014827b <unmap_page_range+4b/80>
Trace; c014847d <unmap_vmas+1cd/230>
Trace; c014c410 <exit_mmap+80/1a0>
Trace; c011f715 <mmput+65/90>
Trace; c01239ec <do_exit+15c/410>
Trace; c011ba30 <do_page_fault+0/52e>
Trace; c010c451 <die+e1/f0>
Trace; c011bc0e <do_page_fault+1de/52e>
Trace; d08d384e <__crc_alloc_fddidev+7da23/19f023>
Trace; d089d6ca <__crc_alloc_fddidev+4789f/19f023>
Trace; c015917f <wake_up_buffer+f/30>
Trace; c01591cc <unlock_buffer+2c/50>
Trace; d089bcc6 <__crc_alloc_fddidev+45e9b/19f023>
Trace; c015cdec <ll_rw_block+5c/90>
Trace; d08d7b92 <__crc_alloc_fddidev+81d67/19f023>
Trace; c011ba30 <do_page_fault+0/52e>
Trace; c010bdb5 <error_code+2d/38>
Trace; c0171b30 <find_inode_fast+20/70>
Trace; c01721e2 <iget_locked+52/c0>
Trace; d08d7efb <__crc_alloc_fddidev+820d0/19f023>
Trace; c0165c12 <real_lookup+d2/100>
Trace; c0165ea6 <do_lookup+96/b0>
Trace; c016638d <link_path_walk+4cd/950>
Trace; c012fc65 <in_group_p+25/30>
Trace; c0166d29 <__user_walk+49/60>
Trace; c0161b1c <vfs_lstat+1c/60>
Trace; c016228b <sys_lstat64+1b/40>
Trace; c010b38b <syscall_call+7/b>
3 warnings and 1 error issued. Results may not be reliable.
--
Cheers
John Summerfield
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-04-16 23:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-16 23:31 Unable to handle kernel paging request at virtual address 6e65704f John Summerfield
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox