Re: vmscan.c heuristic adjustment for smaller systems

[Russell King <rmk+lkml@arm.linux.org.uk>]

On Sat, Apr 17, 2004 at 05:23:43PM -0700, Marc Singer wrote:
> All of these tests are performed at the console, one command at a
> time.  I have a telnet daemon available, so I open a second connection
> to the target system.  I run a continuous loop of file copies on the
> console and I execute 'ls -l /proc' in the telnet window.  It's a
> little slow, but it isn't unreasonable.  Hmm.  I then run the copy
> command in the telnet window followed by the 'ls -l /proc'.  It works
> fine.  I logout of the console session and perform the telnet window
> test again.  The 'ls -l /proc takes 30 seconds.
> 
> When there is more than one process running, everything is peachy.
> When there is only one process (no context switching) I see the slow
> performance.  I had a hypothesis, but my test of that hypothesis
> failed.

Guys, this tends to indicate that we _must_ have up to date aging
information from the PTE - if not, we're liable to miss out on the
pressure from user applications.  The "lazy" method which 2.4 will
allow is not possible with 2.6.

This means we must flush the TLB when we mark the PTE old.

Might be worth reading my thread on linux-mm about this and commenting?
(hint hint)

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core