Re: APIC probs with kernel 2.6.6-rc1-bk2 and usb, bttv

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* Re: APIC probs with kernel 2.6.6-rc1-bk2 and usb, bttv
       [not found] <A6974D8E5F98D511BB910002A50A6647615F9864@hdsmsx403.hd.intel.com>
@ 2004-04-25  3:07 ` Len Brown
  2004-04-25 18:13   ` Roessner Christian
  0 siblings, 1 reply; 4+ messages in thread
From: Len Brown @ 2004-04-25  3:07 UTC (permalink / raw)
  To: Roessner Christian; +Cc: linux-kernel

On Fri, 2004-04-23 at 11:51, Roessner Christian wrote:
> Hello,
> 
> in the meantime I have tested kernel 2.6.6-rc2, but still no luck. I
> also played around with acpi_irq_nobalance and pci=noacpi, etc. But
> this does not fix it (Don´t know wht to do with flags, tagged as
> IA-32, because mine is a AMD64)

Tagged where?  These flags apply equally to both architectures.

> Maybe I forget something in my attached logfile: I use a Gigabyte K8N
> Pro with a NForce3 chipset.

Chances are good that with nforce3 you'll have some of the same problems
that nforce2 users have.

          CPU0       
  0:     345800          XT-PIC  timer
  1:       1452    IO-APIC-edge  i8042
  2:          0          XT-PIC  cascade
  8:          0    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 12:         50    IO-APIC-edge  i8042
 14:       6155    IO-APIC-edge  ide0
 15:         42    IO-APIC-edge  ide1
 16:        678   IO-APIC-level  bttv0, nvidia
 17:        147   IO-APIC-level  aic7xxx, libata
 18:        227   IO-APIC-level  eth0, b1pci-9c00
 19:          7   IO-APIC-level  eth1
 20:          0   IO-APIC-level  ohci_hcd
 21:          0   IO-APIC-level  ehci_hcd
 22:       1806   IO-APIC-level  NVidia nForce3, ohci_hcd

If you run the latest -mm patch, you can fix the XT-PIC timer
by passing "acpi_skip_timer_override" on the cmdline.

RE: USB is totally dead.
you've got a number of controllers, are they all dead.
hard to tell if the last one if taking the interrupts,
or if that is your sound.  perhaps you can disable sound
and see if IRQ22 becomes quiescent.

Re: TV station change freezes system.
Does it also freeze the system if you boot with "noapic"?

cheers,
-Len



^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: APIC probs with kernel 2.6.6-rc1-bk2 and usb, bttv
  2004-04-25  3:07 ` APIC probs with kernel 2.6.6-rc1-bk2 and usb, bttv Len Brown
@ 2004-04-25 18:13   ` Roessner Christian
  0 siblings, 0 replies; 4+ messages in thread
From: Roessner Christian @ 2004-04-25 18:13 UTC (permalink / raw)
  To: linux-kernel, Len Brown

Hello,

>
> Tagged where?  These flags apply equally to both architectures.

Okay, sorry. I did not read the leading text inside kernel-parameters.txt. 
Just did a grep acpi and looked for the listed lines.

>           CPU0
>   0:     345800          XT-PIC  timer
>   1:       1452    IO-APIC-edge  i8042
>   2:          0          XT-PIC  cascade
>   8:          0    IO-APIC-edge  rtc
>   9:          0   IO-APIC-level  acpi
>  12:         50    IO-APIC-edge  i8042
>  14:       6155    IO-APIC-edge  ide0
>  15:         42    IO-APIC-edge  ide1
>  16:        678   IO-APIC-level  bttv0, nvidia
>  17:        147   IO-APIC-level  aic7xxx, libata
>  18:        227   IO-APIC-level  eth0, b1pci-9c00
>  19:          7   IO-APIC-level  eth1
>  20:          0   IO-APIC-level  ohci_hcd
>  21:          0   IO-APIC-level  ehci_hcd
>  22:       1806   IO-APIC-level  NVidia nForce3, ohci_hcd
>
> If you run the latest -mm patch, you can fix the XT-PIC timer
> by passing "acpi_skip_timer_override" on the cmdline.
>

I will try this later, What does this timer-fix mean for my system?

> RE: USB is totally dead.
> you've got a number of controllers, are they all dead.
> hard to tell if the last one if taking the interrupts,
> or if that is your sound.  perhaps you can disable sound
> and see if IRQ22 becomes quiescent.
>

I have stopped the sound and have removed all sound modules (Init-script did 
this for me ;-) ) I have checked, if the modules had been removed (lsmod). I 
did a cat /proc/interrupts and: IRQ22 had ohci_hcd for itself. After that I 
tried to do a hotplug restart, but the init-script was unable to restart it. 
It did nothing, just waiting. I could not break it with CTRL+C.
So, USB does not work, even when sound is not running.

I also tested my SCSI-controller, but that seems to work okay, although it had 
some problems aborting a command (I copied a 400MB file and pressed CTRL+C 
after about 230MB). Here is the output:

Apr 25 19:49:34 [kernel] ISOFS: changing to secondary root
Apr 25 19:52:43 [kernel] scsi1:0:4:0: Attempting to queue an ABORT message
                - Last output repeated 3 times -
Apr 25 19:53:28 [kernel] Recovery code awake
Apr 25 19:53:28 [kernel] scsi1 (4:0): rejecting I/O to offline device

> Re: TV station change freezes system.
> Does it also freeze the system if you boot with "noapic"?
>

I have booted the system without specifying apic (Seems to be noapic, because 
of XT-PIC in /proc/interrupts) and with lapic. In both cases, TV is working 
without any problems. Only specifying apic explicitly, freezes the system.

Regards

Christian

^ permalink raw reply	[flat|nested] 4+ messages in thread

* APIC probs with kernel 2.6.6-rc1-bk2 and usb, bttv
@ 2004-04-21 17:26 Roessner Christian
  2004-04-23 15:51 ` Roessner Christian
  0 siblings, 1 reply; 4+ messages in thread
From: Roessner Christian @ 2004-04-21 17:26 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 896 bytes --]

Hello,

I have searched inside the archives for posted problems with apic and usb or 
apic and bttv. Maybe the following was posted once before, but I could not 
find good answers.

When I boot my machine using apic, usb is broken (plugging in the mouse or 
something else does not seem to do anything). I guess someone told about this 
bug earlier.

The second thing is: I tried to use my MIRO PCTV with apic enabled. When 
starting an application such as tvtime or xawtv, the current channel appears 
and everything seems to be ok until I wait some moments or trying to change 
the channel. In this moment, the machine freezes. I found this bug first, 
when using the 2.4.x kernels, but this has not changed in 2.6.x, as I 
recognized.

I hope, someone is reading this and may send me some patches, if he/she likes 
me to test it.

Regards

Christian

N.B.: Logs are attached in a single file.

[-- Attachment #2: logfile.txt --]
[-- Type: text/plain, Size: 52932 bytes --]

dmesg (right after booting):

errupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs *16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22)
SCSI subsystem initialized
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xa9 -> IRQ 23 Mode:1 Active:1)
00:00:01[A] -> 2-23 -> IRQ 23
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb1 -> IRQ 20 Mode:1 Active:0)
00:00:02[A] -> 2-20 -> IRQ 20
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:0)
00:00:02[B] -> 2-22 -> IRQ 22
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 21 Mode:1 Active:0)
00:00:02[C] -> 2-21 -> IRQ 21
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCK] enabled at IRQ 21
ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 20
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc9 -> IRQ 18 Mode:1 Active:1)
00:01:06[A] -> 2-18 -> IRQ 18
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xd1 -> IRQ 19 Mode:1 Active:1)
00:01:06[B] -> 2-19 -> IRQ 19
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xd9 -> IRQ 16 Mode:1 Active:1)
00:01:06[C] -> 2-16 -> IRQ 16
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xe1 -> IRQ 17 Mode:1 Active:1)
00:01:06[D] -> 2-17 -> IRQ 17
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 02000000
.......     : arbitration: 02
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 000 00  1    0    0   0   0    0    0    00
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  1    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    1    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    D9
 11 001 01  1    1    0   1   0    1    1    E1
 12 001 01  1    1    0   1   0    1    1    C9
 13 001 01  1    1    0   1   0    1    1    D1
 14 001 01  1    1    0   0   0    1    1    B1
 15 001 01  1    1    0   0   0    1    1    C1
 16 001 01  1    1    0   0   0    1    1    B9
 17 001 01  1    1    0   1   0    1    1    A9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xe0000000
PCI-DMA: Disabling IOMMU.
vesafb: framebuffer at 0xe8000000, mapped to 0xffffff000004e000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
ikconfig 0.7 with /proc/config*
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 21830 bytes, found (1024x768, 16923 bytes, v3).
Console: switching to colour frame buffer device 122x40
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3: IDE controller at PCI slot 0000:00:08.0
NFORCE3: chipset revision 165
NFORCE3: not 100% native mode: will probe irqs later
NFORCE3: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3: 0000:00:08.0 (rev a5) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6E040L0, ATA DISK drive
hdb: MAXTOR 6L040J2, ATA DISK drive
Uhhuh. NMI received for unknown reason 2d.
Dazed and confused, but trying to continue
Do you have a strange power saving mode enabled?
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 250 ATAPI Floppy, ATAPI FLOPPY drive
hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdd: set_drive_speed_status: error=0x04
ide1: Drive 1 didn't accept speed setting. Oh, well.
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
 /dev/ide/host0/bus0/target0/lun0: p1
hdb: max request size: 128KiB
hdb: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133)
 /dev/ide/host0/bus0/target1/lun0: p1 p2 p3
ide-floppy driver 0.99.newide
hdd: No disk in drive
hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 148k freed
Adding 1028152k swap on /dev/hdb2.  Priority:-1 extents:1
EXT3 FS on hdb3, internal journal
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xffffff0001051000, 00:e0:4c:39:30:fb, IRQ 18
eth0:  Identified 8139 chip type 'RTL-8139C'
r8169 Gigabit Ethernet driver 1.2 loaded
eth1: Identified chip type is 'RTL8169s/8110s'.
eth1: RTL8169 at 0xffffff0001053000, 00:0d:61:51:4a:fe, IRQ 19
eth1: Auto-negotiation Enabled.
eth1: 100Mbps Full-duplex operation.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86_64 NVIDIA Kernel Module  1.0-5332  Fri Jan  9 12:42:32 PST 2004
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: JLMS      Model: XJ-HD165H         Rev: CH0Z
  Type:   CD-ROM                             ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49525 usecs
intel8x0: clocking to 47386
Linux video capture interface: v1.00
bttv: driver version 0.9.14 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt848 (rev 18) at 0000:01:08.0, irq: 16, latency: 32, mmio: 0xf0000000
bttv0: using: MIRO PCTV [card=1,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=1 tuner=0 radio=no stereo=no
bttv0: using tuner=0
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
tuner: chip found at addr 0xc0 i2c-bus bt848 #0 [sw]
tuner: type set to 0 (Temic PAL (4002 FH5)) by bt848 #0 [sw]
bttv0: registered device video0
bttv0: registered device vbi0
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
ohci_hcd 0000:00:02.0: nVidia Corporation nForce3 USB 1.1
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 20, pci mem ffffff00010e7000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.1: nVidia Corporation nForce3 USB 1.1 (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 22, pci mem ffffff00010e9000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd 0000:00:02.2: nVidia Corporation nForce3 USB 2.0
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 21, pci mem ffffff00010eb000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

usb 2-1: new low speed USB device using address 2
Disabled Privacy Extensions on device ffffffff80433320(lo)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
usb 2-1: control timeout on ep0out
ohci_hcd 0000:00:02.1: Unlink after no-IRQ?  Different ACPI or APIC settings may help.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 432 bytes per conntrack
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 16923 bytes, v3).
bootsplash: status on console 0 changed to on
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
eth1: no IPv6 routers present
eth0: no IPv6 routers present
(scsi1:A:4): 10.000MB/s transfers (10.000MHz, offset 8)
  Vendor: TEAC      Model: CD-W512SB         Rev: 1.0B
  Type:   CD-ROM                             ANSI SCSI revision: 02
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 4, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 4, lun 0,  type 5
CAPI Subsystem Rev 1.1.2.8
b1: revision 1.1.2.2
b1dma: revision 1.1.2.3
b1pci: PCI BIOS reports AVM-B1 at i/o 0x9c00, irq 18
kcapi: Controller 1: b1pci-9c00 attached
b1pci: AVM B1 PCI at i/o 0x9c00, irq 18, revision 2
b1pci: revision 1.1.2.2
libata version 1.02 loaded.
sata_sil version 0.54
ata1: SATA max UDMA/100 cmd 0xFFFFFF00021F9080 ctl 0xFFFFFF00021F908A bmdma 0xFFFFFF00021F9000 irq 17
ata2: SATA max UDMA/100 cmd 0xFFFFFF00021F90C0 ctl 0xFFFFFF00021F90CA bmdma 0xFFFFFF00021F9008 irq 17
ata1: no device found (phy stat 00000000)
scsi2 : sata_sil
ata1: thread exiting
ata2: no device found (phy stat 00000000)
scsi3 : sata_sil
ata2: thread exiting
USB Universal Host Controller Interface driver v2.2


/proc/cmdline:

hdc=ide-scsi vga=0x317 video=mtrr,vesa=1024x768 root=/dev/hdb3 acpi=force apic console=tty0


lsmod:

Module                  Size  Used by
uhci_hcd               29408  0 
sata_sil                6532  0 
libata                 36864  1 sata_sil,[permanent]
b1pci                   7936  0 
b1dma                  15620  1 b1pci
b1                     22464  2 b1pci,b1dma
kernelcapi             48992  3 b1pci,b1dma,b1
ppp_synctty             8704  0 
ppp_async              11072  1 
ipt_TOS                 2432  20 
iptable_mangle          2752  1 
ipt_REJECT              5824  2 
ipt_MASQUERADE          3520  1 
iptable_nat            22860  2 ipt_MASQUERADE
ipt_state               1984  110 
ip_conntrack           33756  3 ipt_MASQUERADE,iptable_nat,ipt_state
ipt_limit               2496  16 
iptable_filter          2752  1 
ip_tables              17024  8 ipt_TOS,iptable_mangle,ipt_REJECT,ipt_MASQUERADE,iptable_nat,ipt_state,ipt_limit,iptable_filter
parport_pc             32832  1 
lp                     10096  0 
aic7xxx               177592  1 
ehci_hcd               26116  0 
ohci_hcd               18372  0 
usbcore               102768  5 uhci_hcd,ehci_hcd,ohci_hcd
v4l1_compat            12100  0 
tuner                  18444  0 
tvaudio                22028  0 
bttv                  165068  0 
video_buf              18500  1 bttv
i2c_algo_bit            8712  1 bttv
v4l2_common             6720  1 bttv
btcx_risc               4360  1 bttv
i2c_core               20676  4 tuner,tvaudio,bttv,i2c_algo_bit
videodev                9728  1 bttv
snd_pcm_oss            52644  0 
snd_mixer_oss          17728  1 snd_pcm_oss
snd_intel8x0           32036  0 
snd_ac97_codec         65156  1 snd_intel8x0
snd_pcm                94284  2 snd_pcm_oss,snd_intel8x0
snd_timer              23368  1 snd_pcm
snd_page_alloc          9992  2 snd_intel8x0,snd_pcm
snd_mpu401_uart         6912  1 snd_intel8x0
snd_rawmidi            22176  1 snd_mpu401_uart
snd_seq_device          7244  1 snd_rawmidi
snd                    48936  9 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
ide_scsi               15172  1 
ppp_generic            30752  6 ppp_synctty,ppp_async
slhc                    6720  1 ppp_generic
nvidia               2565236  0 
r8169                  16260  0 
8139too                22144  0 
parport                39564  2 parport_pc,lp
sr_mod                 15012  0 


lspci -vvxxx:

0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Region 0: Memory at e0000000 (32-bit, prefetchable)
	Capabilities: [44] #08 [0180]
	Capabilities: [c0] AGP version 3.0
		Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x8
00: de 10 d1 00 06 01 b0 00 a4 00 00 06 00 00 00 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 00 00 00 00 08 c0 80 01 22 00 01 01 d0 00 00 00
50: 23 04 1f 00 03 00 00 00 00 00 00 00 00 00 00 00
60: 32 31 03 00 66 45 04 00 66 06 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 30 30 00 00 13 66 66 00
80: 13 66 66 00 c8 00 00 00 70 00 00 00 1f 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 02 00 30 00 1b 42 00 1f 12 03 00 00 ff ff ff ff
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
	Subsystem: Giga-byte Technology: Unknown device 0c11
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
00: de 10 d0 00 0f 00 a0 00 a6 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 11 0c
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 58 14 11 0c 00 f0 ff fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 7f b1 29 04 00 00 00 01 00 00 ff ff
60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 f9 ff
70: 10 00 ff ff 03 00 00 00 00 00 40 00 18 d2 08 00
80: 09 d2 00 20 28 08 d2 88 3f 00 00 00 00 00 00 00
90: 00 00 33 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 10 00 00 00 00 00 00 80 24 40 20 71 33 14 00
f0: 00 ff 5f bf 00 00 00 00 10 ff ff ff 00 00 30 07

0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
	Subsystem: Giga-byte Technology: Unknown device 0c11
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 1c00 [size=64]
	Region 5: I/O ports at 2000 [size=64]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 d4 00 01 00 b0 00 a4 00 05 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 1c 00 00 01 20 00 00 00 00 00 00 58 14 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 58 14 11 0c 01 00 02 c0 00 00 00 00 00 00 00 00
50: 01 1c 00 00 01 20 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology: Unknown device 5004
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at f5002000 (32-bit, non-prefetchable)
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 d7 00 07 00 b0 00 a5 10 03 0c 00 00 80 00
10: 00 20 00 f5 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
40: 58 14 04 50 01 00 02 fe 00 00 00 00 02 00 00 00
50: 00 00 00 00 1d 47 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 ff ff ff 04 0b 30 07

0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology: Unknown device 5004
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at f5003000 (32-bit, non-prefetchable)
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 d7 00 07 00 b8 00 a5 10 03 0c 00 00 80 00
10: 00 30 00 f5 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 03 01
40: 58 14 04 50 01 00 02 fe 00 00 00 00 03 00 00 00
50: 0c 00 00 00 1d 47 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 ff ff ff 04 0a 30 07

0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology: Unknown device 5004
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin C routed to IRQ 21
	Region 0: Memory at f5004000 (32-bit, non-prefetchable)
	Capabilities: [44] #0a [2080]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 d8 00 06 00 b0 00 a2 20 03 0c 00 00 80 00
10: 00 40 00 f5 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 03 03 01
40: 58 14 04 50 0a 80 80 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 98 81 c3 13 00 00 00 00 00 00
70: 00 00 00 05 00 10 30 80 89 3d 84 22 77 25 04 80
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 0c e0 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 ff ff ff 00 00 30 07

0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
	Subsystem: Giga-byte Technology: Unknown device a002
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at d800
	Region 1: I/O ports at dc00 [size=128]
	Region 2: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 da 00 07 00 b0 00 a2 00 01 04 00 00 00 00
10: 01 d8 00 00 01 dc 00 00 00 00 00 f5 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 02 a0
30: 00 00 00 00 44 00 00 00 00 00 00 00 09 01 02 05
40: 58 14 02 a0 01 00 02 06 00 00 00 00 06 01 00 01
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 ff ff ff 04 06 30 07

0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) (prog-if 8a [Master SecP PriP])
	Subsystem: Giga-byte Technology: Unknown device 5002
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Region 4: I/O ports at f000 [size=16]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 d5 00 05 00 b0 00 a5 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 58 14 02 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 58 14 02 50 01 00 02 00 00 00 00 00 00 09 00 00
50: 03 f0 00 00 00 00 00 00 77 20 20 20 01 00 22 20
60: 03 c4 c7 c7 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 30 74 19 00 00 1a 34 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 12 ff ff ff 05 0f 30 07

0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
	I/O behind bridge: 00009000-0000cfff
	Memory behind bridge: f3000000-f4ffffff
	Prefetchable memory behind bridge: f0000000-f0ffffff
	Expansion ROM at 00009000 [disabled] [size=16K]
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00: de 10 dd 00 07 01 a0 00 a2 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 80 90 c0 80 a2
20: 00 f3 f0 f4 00 f0 f0 f0 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
40: 00 00 03 00 01 00 02 00 01 00 00 00 00 00 44 00
50: 00 00 fe 1f 00 00 00 00 ff 1f 00 00 03 00 80 00
60: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 16
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=10
	Memory behind bridge: f1000000-f2ffffff
	Prefetchable memory behind bridge: e8000000-efffffff
	BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00: de 10 d2 00 07 01 20 02 a4 00 04 06 00 10 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 0a f0 00 20 22
20: 00 f1 f0 f2 00 e8 f0 ef 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00
40: 01 00 00 00 00 00 f0 1f 20 00 00 00 00 00 00 00
50: 00 00 00 e0 00 f0 ff e7 ff ff ff ff ff ff ff ff
60: ff 40 ff 40 00 00 00 20 00 00 00 20 ff ff ff ff
70: ff ff ff ff 00 00 00 00 00 00 00 00 ff ff ff ff
80: ff ff ff ff 00 80 00 00 ed 01 00 00 ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: 1b 42 00 1f 00 00 00 00 0c 00 00 00 00 00 00 00
b0: 04 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 20 00 00 80 7c ff 32 07 00 06 30 07
d0: 00 00 00 00 00 00 00 00 08 00 00 e0 ff ff ff e7
e0: b0 b5 f7 ef 90 7f af bf 70 d5 7e df f0 fe ef b9
f0: b0 f6 57 ff e0 ff ef bf d0 3e ef ff 70 f5 f7 ef

0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Capabilities: [80] #08 [2101]
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 00 00 e4 00 00 00 0f cc 00 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 10 22 04 75 80 02 00 00 00
90: 56 04 51 02 00 00 ff 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 1f 00 00 00 20 00 01 00 00 00
50: 00 00 20 00 02 00 00 00 00 00 20 00 03 00 00 00
60: 00 00 20 00 04 00 00 00 00 00 20 00 05 00 00 00
70: 00 00 20 00 06 00 00 00 00 00 20 00 07 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 03 0a 00 00 00 0b 00 00 03 00 20 00 00 70 ff 00
c0: 00 00 00 00 00 00 00 00 13 10 00 00 00 f0 0f 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 00 00 01 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 fe e0 00 00 fe e0 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 03 00 00 00 00 00 00 00 45 34 83 13 31 0b 00 00
90: 00 8c 0c 08 07 07 7b 06 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: d0 e9 db 2f 6d 00 00 00 7b f7 01 25 a1 3b c6 f1
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 14 be c1 af 6c 2a 9d f8 c9 32 49 fe 2f b8 b1 a7
e0: 0d bf f9 af a8 6a d5 96 5a b5 60 3e 31 66 49 74
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 00 00 40 00 00 00 00 00 00 00 00 00 00 00
50: 68 20 e0 bc f0 00 00 00 00 00 00 00 00 09 20 00
60: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 05 00 00 00 70 00 00 00 00 c4 1f 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 07 07 e2 04 00 00 00 00 00 00 00 00
e0: 00 00 00 00 20 0e 5c 00 08 01 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 9000
	Region 1: Memory at f4004000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 39 81 07 00 90 02 10 00 00 02 00 20 00 00
10: 01 90 00 00 00 40 00 f4 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 39 81
30: 00 00 00 00 50 00 00 00 00 00 00 00 09 01 20 40
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 c2 f7 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:08.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (4000ns min, 10000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0000000 (32-bit, prefetchable)
00: 9e 10 50 03 06 00 80 02 12 00 00 04 00 20 00 00
10: 08 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 10 28
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:09.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 2000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 9400 [disabled]
	Region 1: Memory at f4008000 (32-bit, non-prefetchable) [size=4K]
00: 04 90 78 81 06 00 80 02 00 00 00 01 08 20 00 00
10: 01 94 00 00 00 80 00 f4 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 08 08
40: a0 15 00 80 a0 15 00 80 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:0a.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 9800
	Region 1: I/O ports at 9c00 [size=32]
00: 44 12 00 07 07 00 00 00 00 00 80 02 00 20 00 00
10: 01 98 00 00 01 9c 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

0000:01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 (rev 10)
	Subsystem: Giga-byte Technology: Unknown device e000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (8000ns min, 16000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at a000
	Region 1: Memory at f4005000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 69 81 07 00 b0 02 10 00 00 02 08 20 00 00
10: 01 a0 00 00 00 50 00 f4 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 00 e0
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 20 40
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 f7
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:0c.0 RAID bus controller: Integrated Technology Express, Inc.: Unknown device 8212 (rev 11)
	Subsystem: Integrated Technology Express, Inc.: Unknown device 0001
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (2000ns min, 2000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at a410
	Region 1: I/O ports at a800 [size=4]
	Region 2: I/O ports at ac10 [size=8]
	Region 3: I/O ports at b000 [size=4]
	Region 4: I/O ports at b400 [size=16]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 83 12 12 82 07 00 30 02 11 00 04 01 00 00 00 00
10: 11 a4 00 00 01 a8 00 00 11 ac 00 00 01 b0 00 00
20: 01 b4 00 00 00 00 00 00 00 00 00 00 83 12 01 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 08 08
40: 00 a0 36 00 08 00 08 00 02 02 00 00 04 02 04 02
50: 01 20 00 00 a3 00 31 31 a3 00 31 31 00 1a 02 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:0d.0 RAID bus controller: CMD Technology Inc: Unknown device 3512 (rev 01)
	Subsystem: CMD Technology Inc: Unknown device 6512
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at b800
	Region 1: I/O ports at bc00 [size=4]
	Region 2: I/O ports at c000 [size=8]
	Region 3: I/O ports at c400 [size=4]
	Region 4: I/O ports at c800 [size=16]
	Region 5: Memory at f4006000 (32-bit, non-prefetchable) [size=512]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: 95 10 12 35 07 00 b0 02 01 00 04 01 08 20 00 00
10: 01 b8 00 00 01 bc 00 00 01 c0 00 00 01 c4 00 00
20: 01 c8 00 00 00 60 00 f4 00 00 00 00 95 10 12 65
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
40: 02 00 00 00 02 a0 20 80 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 00 22 06 00 40 00 64 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 22 00 00 00 22 00 00 00 00 00 00 00 ff ff ef a6
90: 00 00 00 08 ff ff 00 00 00 00 00 18 00 00 00 00
a0: 01 21 15 65 dd 62 dd 62 92 43 92 43 09 40 09 40
b0: 01 21 15 65 dd 62 dd 62 92 43 92 43 09 40 09 40
c0: 84 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology: Unknown device 1000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 1000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f4007000 (32-bit, non-prefetchable)
	Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 4c 10 24 80 06 00 10 02 00 10 00 0c 08 20 00 00
10: 00 70 00 f4 00 00 00 f4 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 00 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 09 01 02 04
40: 00 00 00 00 01 00 02 7e 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
f0: 10 00 00 00 82 10 00 00 58 14 00 10 00 00 00 00

0000:02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA])
	Subsystem: Asustek Computer, Inc.: Unknown device 8063
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 248 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f1000000 (32-bit, non-prefetchable)
	Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 3.0
		Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
		Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x8
00: de 10 81 01 07 00 b0 02 a2 00 00 03 00 f8 00 00
10: 00 00 00 f1 08 00 00 e8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 63 80
30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 05 01
40: 43 10 63 80 02 00 30 00 1b 0e 00 1f 12 43 00 1f
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


lsusb:

Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  


gcc --version:

gcc (GCC) 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)


uname -a:

Linux amd64 2.6.6-rc1 #3 Wed Apr 21 10:00:56 CEST 2004 x86_64 4  GNU/Linux


emerge -s hotplug:

*  sys-apps/hotplug
      Latest version available: 20040401
      Latest version installed: 20040401

*  sys-apps/hotplug-base
      Latest version available: 20040401
      Latest version installed: 20040401


/proc/interrupts:

           CPU0       
  0:     345800          XT-PIC  timer
  1:       1452    IO-APIC-edge  i8042
  2:          0          XT-PIC  cascade
  8:          0    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 12:         50    IO-APIC-edge  i8042
 14:       6155    IO-APIC-edge  ide0
 15:         42    IO-APIC-edge  ide1
 16:        678   IO-APIC-level  bttv0, nvidia
 17:        147   IO-APIC-level  aic7xxx, libata
 18:        227   IO-APIC-level  eth0, b1pci-9c00
 19:          7   IO-APIC-level  eth1
 20:          0   IO-APIC-level  ohci_hcd
 21:          0   IO-APIC-level  ehci_hcd
 22:       1806   IO-APIC-level  NVidia nForce3, ohci_hcd
NMI:          1 
LOC:     345596 
ERR:          0
MIS:          0


/proc/ioports:

0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0330-0331 : MPU401 UART
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
1c00-1c3f : 0000:00:01.1
2000-203f : 0000:00:01.1
9000-cfff : PCI Bus #01
  9000-90ff : 0000:01:06.0
    9000-90ff : 8139too
  9400-94ff : 0000:01:09.0
  9800-983f : 0000:01:0a.0
  9c00-9c1f : 0000:01:0a.0
    9c00-9c1e : b1pci-9c00
  a000-a0ff : 0000:01:0b.0
    a000-a0ff : eth1
  a410-a417 : 0000:01:0c.0
  a800-a803 : 0000:01:0c.0
  ac10-ac17 : 0000:01:0c.0
  b000-b003 : 0000:01:0c.0
  b400-b40f : 0000:01:0c.0
  b800-b807 : 0000:01:0d.0
    b800-b807 : sata_sil
  bc00-bc03 : 0000:01:0d.0
    bc00-bc03 : sata_sil
  c000-c007 : 0000:01:0d.0
    c000-c007 : sata_sil
  c400-c403 : 0000:01:0d.0
    c400-c403 : sata_sil
  c800-c80f : 0000:01:0d.0
    c800-c80f : sata_sil
d800-d8ff : 0000:00:06.0
dc00-dc7f : 0000:00:06.0
  dc00-dc3f : NVidia nForce3 - Controller
f000-f00f : 0000:00:08.0
  f000-f007 : ide0
  f008-f00f : ide1


/proc/cpuinfo:

processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 15
model		: 4
model name	: AMD Athlon(tm) 64 Processor 3200+
stepping	: 8
cpu MHz		: 2009.152
cache size	: 1024 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 1
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow
bogomips	: 3981.31
TLB size	: 1088 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 40 bits physical, 48 bits virtual
power management: ts fid vid ttp


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: APIC probs with kernel 2.6.6-rc1-bk2 and usb, bttv
  2004-04-21 17:26 Roessner Christian
@ 2004-04-23 15:51 ` Roessner Christian
  0 siblings, 0 replies; 4+ messages in thread
From: Roessner Christian @ 2004-04-23 15:51 UTC (permalink / raw)
  To: linux-kernel

Hello,

in the meantime I have tested kernel 2.6.6-rc2, but still no luck. I also 
played around with acpi_irq_nobalance and pci=noacpi, etc. But this does not 
fix it (Don´t know wht to do with flags, tagged as IA-32, because mine is a 
AMD64)

Maybe I forget something in my attached logfile: I use a Gigabyte K8N Pro with 
a NForce3 chipset.

Is there someone, who is interested in finding out, what is wrong? I would 
like to help fixing this, but I only could be a tester.

Thanks

Christian

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2004-04-25 18:13 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <A6974D8E5F98D511BB910002A50A6647615F9864@hdsmsx403.hd.intel.com>
2004-04-25  3:07 ` APIC probs with kernel 2.6.6-rc1-bk2 and usb, bttv Len Brown
2004-04-25 18:13   ` Roessner Christian
2004-04-21 17:26 Roessner Christian
2004-04-23 15:51 ` Roessner Christian

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox