From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
To: Jesper Juhl <juhl-lkml@dif.dk>
Cc: linux-kernel@vger.kernel.org,
Ryan Underwood <nemesis-lists@icequake.net>,
Willy Tarreau <willy@w.ods.org>,
twaugh@redhat.com
Subject: Re: Request: Netmos support in parport_serial for 2.4.27
Date: Sun, 13 Jun 2004 19:07:27 -0300 [thread overview]
Message-ID: <20040613220727.GB4771@logos.cnet> (raw)
In-Reply-To: <Pine.LNX.4.56.0406132225020.5930@jjulnx.backbone.dif.dk>
Jesper,
Two more things.
It seems v2.6 also lacks support for this boards:
grep PCI_DEVICE_ID_NETMOS_ *
pci_ids.h:#define PCI_DEVICE_ID_NETMOS_9735 0x9735
pci_ids.h:#define PCI_DEVICE_ID_NETMOS_9835 0x9835
[marcelo@localhost linux]$
Care to prepare a v2.6 version?
And two, do we really need to move parport_serial.c to drivers/char in v2.4 ?
Thanks again
On Sun, Jun 13, 2004 at 10:30:35PM +0200, Jesper Juhl wrote:
> On Sun, 13 Jun 2004, Marcelo Tosatti wrote:
>
> > n Sun, Jun 13, 2004 at 06:19:49AM -0500, Ryan Underwood wrote:
> > >
> > > Hi,
> > >
> > > There's been a patch floating around for a while now to add Netmos
> > > support to parport_serial. It has been submitted numerous times but it
> > > seems that nobody notices it. :)
> > >
> > > Can it be reviewed for inclusion before 2.4.27? I have a few systems
> > > with these cards and it would be very nice to have them up to snuff.
> > >
> > > The patch against 2.4.20 can be found here:
> > > http://winterwolf.co.uk/linuxsw
> >
> > Hi Ryan,
> >
> > Care to submit the patch inlined in another email message?
> >
>
> Here are the original patches from http://winterwolf.co.uk/linuxsw
> An attempt of mine to update them for 2.4.27-pre5 can be found elsewhere
> in this thread.
>
>
> Kind regards,
> Jesper Juhl <juhl-lkml@dif.dk>
>
>
> 00_parport_serial.patch :
>
> diff -urN orig/linux-2.4.20-pre9/drivers/char/ChangeLog linux-2.4.20-pre9/drivers/char/ChangeLog
> --- orig/linux-2.4.20-pre9/drivers/char/ChangeLog Tue Aug 14 01:37:33 2001
> +++ linux-2.4.20-pre9/drivers/char/ChangeLog Sat Oct 5 17:58:35 2002
> @@ -1,3 +1,8 @@
> +2002-09-21 Marek Michalkiewicz <marekm@amelek.gda.pl>
> +
> + * parport_serial.c: Move from ../parport/ here, must be initialised
> + after serial.c for register_serial to work.
> +
> 2001-08-11 Tim Waugh <twaugh@redhat.com>
>
> * serial.c (get_pci_port): Deal with awkward Titan cards.
> diff -urN orig/linux-2.4.20-pre9/drivers/char/Makefile linux-2.4.20-pre9/drivers/char/Makefile
> --- orig/linux-2.4.20-pre9/drivers/char/Makefile Sat Oct 5 17:43:27 2002
> +++ linux-2.4.20-pre9/drivers/char/Makefile Sat Oct 5 17:58:35 2002
> @@ -153,6 +153,7 @@
>
> obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o $(CONSOLE) selection.o
> obj-$(CONFIG_SERIAL) += $(SERIAL)
> +obj-$(CONFIG_PARPORT_SERIAL) += parport_serial.o
> obj-$(CONFIG_SERIAL_HCDP) += hcdp_serial.o
> obj-$(CONFIG_SERIAL_21285) += serial_21285.o
> obj-$(CONFIG_SERIAL_SA1100) += serial_sa1100.o
> diff -urN orig/linux-2.4.20-pre9/drivers/char/parport_serial.c linux-2.4.20-pre9/drivers/char/parport_serial.c
> --- orig/linux-2.4.20-pre9/drivers/char/parport_serial.c Thu Jan 1 01:00:00 1970
> +++ linux-2.4.20-pre9/drivers/char/parport_serial.c Sat Oct 5 17:58:35 2002
> @@ -0,0 +1,426 @@
> +/*
> + * Support for common PCI multi-I/O cards (which is most of them)
> + *
> + * Copyright (C) 2001 Tim Waugh <twaugh@redhat.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + *
> + *
> + * Multi-function PCI cards are supposed to present separate logical
> + * devices on the bus. A common thing to do seems to be to just use
> + * one logical device with lots of base address registers for both
> + * parallel ports and serial ports. This driver is for dealing with
> + * that.
> + *
> + */
> +
> +#include <linux/types.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/pci.h>
> +#include <linux/parport.h>
> +#include <linux/parport_pc.h>
> +#include <linux/serial.h>
> +#include <linux/serialP.h>
> +#include <linux/list.h>
> +
> +#include <asm/serial.h>
> +
> +enum parport_pc_pci_cards {
> + titan_110l = 0,
> + titan_210l,
> + avlab_1s1p,
> + avlab_1s1p_650,
> + avlab_1s1p_850,
> + avlab_1s2p,
> + avlab_1s2p_650,
> + avlab_1s2p_850,
> + avlab_2s1p,
> + avlab_2s1p_650,
> + avlab_2s1p_850,
> + siig_1s1p_10x,
> + siig_2s1p_10x,
> + siig_2p1s_20x,
> + siig_1s1p_20x,
> + siig_2s1p_20x,
> +};
> +
> +
> +/* each element directly indexed from enum list, above */
> +static struct parport_pc_pci {
> + int numports;
> + struct { /* BAR (base address registers) numbers in the config
> + space header */
> + int lo;
> + int hi; /* -1 if not there, >6 for offset-method (max
> + BAR is 6) */
> + } addr[4];
> +
> + /* If set, this is called immediately after pci_enable_device.
> + * If it returns non-zero, no probing will take place and the
> + * ports will not be used. */
> + int (*preinit_hook) (struct pci_dev *pdev, int autoirq, int autodma);
> +
> + /* If set, this is called after probing for ports. If 'failed'
> + * is non-zero we couldn't use any of the ports. */
> + void (*postinit_hook) (struct pci_dev *pdev, int failed);
> +} cards[] __devinitdata = {
> + /* titan_110l */ { 1, { { 3, -1 }, } },
> + /* titan_210l */ { 1, { { 3, -1 }, } },
> + /* avlab_1s1p */ { 1, { { 1, 2}, } },
> + /* avlab_1s1p_650 */ { 1, { { 1, 2}, } },
> + /* avlab_1s1p_850 */ { 1, { { 1, 2}, } },
> + /* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} },
> + /* avlab_1s2p_650 */ { 2, { { 1, 2}, { 3, 4 },} },
> + /* avlab_1s2p_850 */ { 2, { { 1, 2}, { 3, 4 },} },
> + /* avlab_2s1p */ { 1, { { 2, 3}, } },
> + /* avlab_2s1p_650 */ { 1, { { 2, 3}, } },
> + /* avlab_2s1p_850 */ { 1, { { 2, 3}, } },
> + /* siig_1s1p_10x */ { 1, { { 3, 4 }, } },
> + /* siig_2s1p_10x */ { 1, { { 4, 5 }, } },
> + /* siig_2p1s_20x */ { 2, { { 1, 2 }, { 3, 4 }, } },
> + /* siig_1s1p_20x */ { 1, { { 1, 2 }, } },
> + /* siig_2s1p_20x */ { 1, { { 2, 3 }, } },
> +};
> +
> +static struct pci_device_id parport_serial_pci_tbl[] __devinitdata = {
> + /* PCI cards */
> + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
> + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
> + /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
> + { 0x14db, 0x2110, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p},
> + { 0x14db, 0x2111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_650},
> + { 0x14db, 0x2112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_850},
> + { 0x14db, 0x2140, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p},
> + { 0x14db, 0x2141, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p_650},
> + { 0x14db, 0x2142, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p_850},
> + { 0x14db, 0x2160, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p},
> + { 0x14db, 0x2161, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_650},
> + { 0x14db, 0x2162, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_850},
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
> + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
> +
> + { 0, } /* terminate list */
> +};
> +MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
> +
> +struct pci_board_no_ids {
> + int flags;
> + int num_ports;
> + int base_baud;
> + int uart_offset;
> + int reg_shift;
> + int (*init_fn)(struct pci_dev *dev, struct pci_board_no_ids *board,
> + int enable);
> + int first_uart_offset;
> +};
> +
> +static int __devinit siig10x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
> +{
> + return pci_siig10x_fn(dev, NULL, enable);
> +}
> +
> +static int __devinit siig20x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
> +{
> + return pci_siig20x_fn(dev, NULL, enable);
> +}
> +
> +static struct pci_board_no_ids pci_boards[] __devinitdata = {
> + /*
> + * PCI Flags, Number of Ports, Base (Maximum) Baud Rate,
> + * Offset to get to next UART's registers,
> + * Register shift to use for memory-mapped I/O,
> + * Initialization function, first UART offset
> + */
> +
> +// Cards not tested are marked n/t
> +// If you have one of these cards and it works for you, please tell me..
> +
> +/* titan_110l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 1, 921600 },
> +/* titan_210l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 },
> +/* avlab_1s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> +/* avlab_1s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> +/* avlab_1s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> +/* avlab_1s2p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> +/* avlab_1s2p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> +/* avlab_1s2p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> +/* avlab_2s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
> +/* avlab_2s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
> +/* avlab_2s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
> +/* siig_1s1p_10x */ { SPCI_FL_BASE2, 1, 460800, 0, 0, siig10x_init_fn },
> +/* siig_2s1p_10x */ { SPCI_FL_BASE2, 1, 921600, 0, 0, siig10x_init_fn },
> +/* siig_2p1s_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
> +/* siig_1s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
> +/* siig_2s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
> +};
> +
> +struct parport_serial_private {
> + int num_ser;
> + int line[20];
> + struct pci_board_no_ids ser;
> + int num_par;
> + struct parport *port[PARPORT_MAX];
> +};
> +
> +static int __devinit get_pci_port (struct pci_dev *dev,
> + struct pci_board_no_ids *board,
> + struct serial_struct *req,
> + int idx)
> +{
> + unsigned long port;
> + int base_idx;
> + int max_port;
> + int offset;
> +
> + base_idx = SPCI_FL_GET_BASE(board->flags);
> + if (board->flags & SPCI_FL_BASE_TABLE)
> + base_idx += idx;
> +
> + if (board->flags & SPCI_FL_REGION_SZ_CAP) {
> + max_port = pci_resource_len(dev, base_idx) / 8;
> + if (idx >= max_port)
> + return 1;
> + }
> +
> + offset = board->first_uart_offset;
> +
> + /* Timedia/SUNIX uses a mixture of BARs and offsets */
> + /* Ugh, this is ugly as all hell --- TYT */
> + if(dev->vendor == PCI_VENDOR_ID_TIMEDIA ) /* 0x1409 */
> + switch(idx) {
> + case 0: base_idx=0;
> + break;
> + case 1: base_idx=0; offset=8;
> + break;
> + case 2: base_idx=1;
> + break;
> + case 3: base_idx=1; offset=8;
> + break;
> + case 4: /* BAR 2*/
> + case 5: /* BAR 3 */
> + case 6: /* BAR 4*/
> + case 7: base_idx=idx-2; /* BAR 5*/
> + }
> +
> + port = pci_resource_start(dev, base_idx) + offset;
> +
> + if ((board->flags & SPCI_FL_BASE_TABLE) == 0)
> + port += idx * (board->uart_offset ? board->uart_offset : 8);
> +
> + if (pci_resource_flags (dev, base_idx) & IORESOURCE_IO) {
> + int high_bits_offset = ((sizeof(long)-sizeof(int))*8);
> + req->port = port;
> + if (high_bits_offset)
> + req->port_high = port >> high_bits_offset;
> + else
> + req->port_high = 0;
> + return 0;
> + }
> + req->io_type = SERIAL_IO_MEM;
> + req->iomem_base = ioremap(port, board->uart_offset);
> + req->iomem_reg_shift = board->reg_shift;
> + req->port = 0;
> + return req->iomem_base ? 0 : 1;
> +}
> +
> +/* Register the serial port(s) of a PCI card. */
> +static int __devinit serial_register (struct pci_dev *dev,
> + const struct pci_device_id *id)
> +{
> + struct pci_board_no_ids *board = &pci_boards[id->driver_data];
> + struct parport_serial_private *priv = pci_get_drvdata (dev);
> + struct serial_struct serial_req;
> + int base_baud;
> + int k;
> + int success = 0;
> +
> + priv->ser = *board;
> + if (board->init_fn && ((board->init_fn) (dev, board, 1) != 0))
> + return 1;
> +
> + base_baud = board->base_baud;
> + if (!base_baud)
> + base_baud = BASE_BAUD;
> + memset (&serial_req, 0, sizeof (serial_req));
> +
> + for (k = 0; k < board->num_ports; k++) {
> + int line;
> + serial_req.irq = dev->irq;
> + if (get_pci_port (dev, board, &serial_req, k))
> + break;
> + serial_req.flags = ASYNC_SKIP_TEST | ASYNC_AUTOPROBE;
> + serial_req.baud_base = base_baud;
> + line = register_serial (&serial_req);
> + if (line < 0) {
> + printk (KERN_DEBUG
> + "parport_serial: register_serial failed\n");
> + continue;
> + }
> + priv->line[priv->num_ser++] = line;
> + success = 1;
> + }
> +
> + return success ? 0 : 1;
> +}
> +
> +/* Register the parallel port(s) of a PCI card. */
> +static int __devinit parport_register (struct pci_dev *dev,
> + const struct pci_device_id *id)
> +{
> + struct parport_serial_private *priv = pci_get_drvdata (dev);
> + int i = id->driver_data, n;
> + int success = 0;
> +
> + if (cards[i].preinit_hook &&
> + cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
> + return -ENODEV;
> +
> + for (n = 0; n < cards[i].numports; n++) {
> + struct parport *port;
> + int lo = cards[i].addr[n].lo;
> + int hi = cards[i].addr[n].hi;
> + unsigned long io_lo, io_hi;
> + io_lo = pci_resource_start (dev, lo);
> + io_hi = 0;
> + if ((hi >= 0) && (hi <= 6))
> + io_hi = pci_resource_start (dev, hi);
> + else if (hi > 6)
> + io_lo += hi; /* Reinterpret the meaning of
> + "hi" as an offset (see SYBA
> + def.) */
> + /* TODO: test if sharing interrupts works */
> + printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, "
> + "I/O at %#lx(%#lx)\n",
> + parport_serial_pci_tbl[i].vendor,
> + parport_serial_pci_tbl[i].device, io_lo, io_hi);
> + port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
> + PARPORT_DMA_NONE, dev);
> + if (port) {
> + priv->port[priv->num_par++] = port;
> + success = 1;
> + }
> + }
> +
> + if (cards[i].postinit_hook)
> + cards[i].postinit_hook (dev, !success);
> +
> + return success ? 0 : 1;
> +}
> +
> +static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
> + const struct pci_device_id *id)
> +{
> + struct parport_serial_private *priv;
> + int err;
> +
> + priv = kmalloc (sizeof *priv, GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> + priv->num_ser = priv->num_par = 0;
> + pci_set_drvdata (dev, priv);
> +
> + err = pci_enable_device (dev);
> + if (err) {
> + pci_set_drvdata (dev, NULL);
> + kfree (priv);
> + return err;
> + }
> +
> + if (parport_register (dev, id)) {
> + pci_set_drvdata (dev, NULL);
> + kfree (priv);
> + return -ENODEV;
> + }
> +
> + if (serial_register (dev, id)) {
> + int i;
> + for (i = 0; i < priv->num_par; i++)
> + parport_pc_unregister_port (priv->port[i]);
> + pci_set_drvdata (dev, NULL);
> + kfree (priv);
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> +static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
> +{
> + struct parport_serial_private *priv = pci_get_drvdata (dev);
> + int i;
> +
> + // Serial ports
> + for (i = 0; i < priv->num_ser; i++) {
> + unregister_serial (priv->line[i]);
> +
> + if (priv->ser.init_fn)
> + (priv->ser.init_fn) (dev, &priv->ser, 0);
> + }
> + pci_set_drvdata (dev, NULL);
> +
> + // Parallel ports
> + for (i = 0; i < priv->num_par; i++)
> + parport_pc_unregister_port (priv->port[i]);
> +
> + kfree (priv);
> + return;
> +}
> +
> +static struct pci_driver parport_serial_pci_driver = {
> + name: "parport_serial",
> + id_table: parport_serial_pci_tbl,
> + probe: parport_serial_pci_probe,
> + remove: __devexit_p(parport_serial_pci_remove),
> +};
> +
> +
> +static int __init parport_serial_init (void)
> +{
> + return pci_module_init (&parport_serial_pci_driver);
> +}
> +
> +static void __exit parport_serial_exit (void)
> +{
> + pci_unregister_driver (&parport_serial_pci_driver);
> + return;
> +}
> +
> +MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
> +MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
> +MODULE_LICENSE("GPL");
> +
> +module_init(parport_serial_init);
> +module_exit(parport_serial_exit);
> diff -urN orig/linux-2.4.20-pre9/drivers/parport/ChangeLog linux-2.4.20-pre9/drivers/parport/ChangeLog
> --- orig/linux-2.4.20-pre9/drivers/parport/ChangeLog Sat Aug 3 02:39:44 2002
> +++ linux-2.4.20-pre9/drivers/parport/ChangeLog Sat Oct 5 17:58:35 2002
> @@ -1,3 +1,8 @@
> +2002-09-21 Marek Michalkiewicz <marekm@amelek.gda.pl>
> +
> + * parport_serial.c: Move from here to ../char/, must be initialised
> + after serial.c for register_serial to work.
> +
> 2002-04-25 Tim Waugh <twaugh@redhat.com>
>
> * parport_serial.c, parport_pc.c: Move some SIIG cards around.
> diff -urN orig/linux-2.4.20-pre9/drivers/parport/Makefile linux-2.4.20-pre9/drivers/parport/Makefile
> --- orig/linux-2.4.20-pre9/drivers/parport/Makefile Fri Sep 14 01:04:43 2001
> +++ linux-2.4.20-pre9/drivers/parport/Makefile Sat Oct 5 17:58:35 2002
> @@ -22,7 +22,6 @@
>
> obj-$(CONFIG_PARPORT) += parport.o
> obj-$(CONFIG_PARPORT_PC) += parport_pc.o
> -obj-$(CONFIG_PARPORT_SERIAL) += parport_serial.o
> obj-$(CONFIG_PARPORT_PC_PCMCIA)+= parport_cs.o
> obj-$(CONFIG_PARPORT_AMIGA) += parport_amiga.o
> obj-$(CONFIG_PARPORT_MFC3) += parport_mfc3.o
> diff -urN orig/linux-2.4.20-pre9/drivers/parport/parport_serial.c linux-2.4.20-pre9/drivers/parport/parport_serial.c
> --- orig/linux-2.4.20-pre9/drivers/parport/parport_serial.c Sat Aug 3 02:39:44 2002
> +++ linux-2.4.20-pre9/drivers/parport/parport_serial.c Thu Jan 1 01:00:00 1970
> @@ -1,426 +0,0 @@
> -/*
> - * Support for common PCI multi-I/O cards (which is most of them)
> - *
> - * Copyright (C) 2001 Tim Waugh <twaugh@redhat.com>
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License
> - * as published by the Free Software Foundation; either version
> - * 2 of the License, or (at your option) any later version.
> - *
> - *
> - * Multi-function PCI cards are supposed to present separate logical
> - * devices on the bus. A common thing to do seems to be to just use
> - * one logical device with lots of base address registers for both
> - * parallel ports and serial ports. This driver is for dealing with
> - * that.
> - *
> - */
> -
> -#include <linux/types.h>
> -#include <linux/module.h>
> -#include <linux/init.h>
> -#include <linux/pci.h>
> -#include <linux/parport.h>
> -#include <linux/parport_pc.h>
> -#include <linux/serial.h>
> -#include <linux/serialP.h>
> -#include <linux/list.h>
> -
> -#include <asm/serial.h>
> -
> -enum parport_pc_pci_cards {
> - titan_110l = 0,
> - titan_210l,
> - avlab_1s1p,
> - avlab_1s1p_650,
> - avlab_1s1p_850,
> - avlab_1s2p,
> - avlab_1s2p_650,
> - avlab_1s2p_850,
> - avlab_2s1p,
> - avlab_2s1p_650,
> - avlab_2s1p_850,
> - siig_1s1p_10x,
> - siig_2s1p_10x,
> - siig_2p1s_20x,
> - siig_1s1p_20x,
> - siig_2s1p_20x,
> -};
> -
> -
> -/* each element directly indexed from enum list, above */
> -static struct parport_pc_pci {
> - int numports;
> - struct { /* BAR (base address registers) numbers in the config
> - space header */
> - int lo;
> - int hi; /* -1 if not there, >6 for offset-method (max
> - BAR is 6) */
> - } addr[4];
> -
> - /* If set, this is called immediately after pci_enable_device.
> - * If it returns non-zero, no probing will take place and the
> - * ports will not be used. */
> - int (*preinit_hook) (struct pci_dev *pdev, int autoirq, int autodma);
> -
> - /* If set, this is called after probing for ports. If 'failed'
> - * is non-zero we couldn't use any of the ports. */
> - void (*postinit_hook) (struct pci_dev *pdev, int failed);
> -} cards[] __devinitdata = {
> - /* titan_110l */ { 1, { { 3, -1 }, } },
> - /* titan_210l */ { 1, { { 3, -1 }, } },
> - /* avlab_1s1p */ { 1, { { 1, 2}, } },
> - /* avlab_1s1p_650 */ { 1, { { 1, 2}, } },
> - /* avlab_1s1p_850 */ { 1, { { 1, 2}, } },
> - /* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} },
> - /* avlab_1s2p_650 */ { 2, { { 1, 2}, { 3, 4 },} },
> - /* avlab_1s2p_850 */ { 2, { { 1, 2}, { 3, 4 },} },
> - /* avlab_2s1p */ { 1, { { 2, 3}, } },
> - /* avlab_2s1p_650 */ { 1, { { 2, 3}, } },
> - /* avlab_2s1p_850 */ { 1, { { 2, 3}, } },
> - /* siig_1s1p_10x */ { 1, { { 3, 4 }, } },
> - /* siig_2s1p_10x */ { 1, { { 4, 5 }, } },
> - /* siig_2p1s_20x */ { 2, { { 1, 2 }, { 3, 4 }, } },
> - /* siig_1s1p_20x */ { 1, { { 1, 2 }, } },
> - /* siig_2s1p_20x */ { 1, { { 2, 3 }, } },
> -};
> -
> -static struct pci_device_id parport_serial_pci_tbl[] __devinitdata = {
> - /* PCI cards */
> - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
> - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
> - /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
> - { 0x14db, 0x2110, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p},
> - { 0x14db, 0x2111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_650},
> - { 0x14db, 0x2112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_850},
> - { 0x14db, 0x2140, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p},
> - { 0x14db, 0x2141, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p_650},
> - { 0x14db, 0x2142, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p_850},
> - { 0x14db, 0x2160, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p},
> - { 0x14db, 0x2161, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_650},
> - { 0x14db, 0x2162, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_850},
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
> - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
> - PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
> -
> - { 0, } /* terminate list */
> -};
> -MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
> -
> -struct pci_board_no_ids {
> - int flags;
> - int num_ports;
> - int base_baud;
> - int uart_offset;
> - int reg_shift;
> - int (*init_fn)(struct pci_dev *dev, struct pci_board_no_ids *board,
> - int enable);
> - int first_uart_offset;
> -};
> -
> -static int __devinit siig10x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
> -{
> - return pci_siig10x_fn(dev, NULL, enable);
> -}
> -
> -static int __devinit siig20x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable)
> -{
> - return pci_siig20x_fn(dev, NULL, enable);
> -}
> -
> -static struct pci_board_no_ids pci_boards[] __devinitdata = {
> - /*
> - * PCI Flags, Number of Ports, Base (Maximum) Baud Rate,
> - * Offset to get to next UART's registers,
> - * Register shift to use for memory-mapped I/O,
> - * Initialization function, first UART offset
> - */
> -
> -// Cards not tested are marked n/t
> -// If you have one of these cards and it works for you, please tell me..
> -
> -/* titan_110l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 1, 921600 },
> -/* titan_210l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 },
> -/* avlab_1s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> -/* avlab_1s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> -/* avlab_1s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> -/* avlab_1s2p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> -/* avlab_1s2p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> -/* avlab_1s2p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> -/* avlab_2s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
> -/* avlab_2s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
> -/* avlab_2s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
> -/* siig_1s1p_10x */ { SPCI_FL_BASE2, 1, 460800, 0, 0, siig10x_init_fn },
> -/* siig_2s1p_10x */ { SPCI_FL_BASE2, 1, 921600, 0, 0, siig10x_init_fn },
> -/* siig_2p1s_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
> -/* siig_1s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
> -/* siig_2s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn },
> -};
> -
> -struct parport_serial_private {
> - int num_ser;
> - int line[20];
> - struct pci_board_no_ids ser;
> - int num_par;
> - struct parport *port[PARPORT_MAX];
> -};
> -
> -static int __devinit get_pci_port (struct pci_dev *dev,
> - struct pci_board_no_ids *board,
> - struct serial_struct *req,
> - int idx)
> -{
> - unsigned long port;
> - int base_idx;
> - int max_port;
> - int offset;
> -
> - base_idx = SPCI_FL_GET_BASE(board->flags);
> - if (board->flags & SPCI_FL_BASE_TABLE)
> - base_idx += idx;
> -
> - if (board->flags & SPCI_FL_REGION_SZ_CAP) {
> - max_port = pci_resource_len(dev, base_idx) / 8;
> - if (idx >= max_port)
> - return 1;
> - }
> -
> - offset = board->first_uart_offset;
> -
> - /* Timedia/SUNIX uses a mixture of BARs and offsets */
> - /* Ugh, this is ugly as all hell --- TYT */
> - if(dev->vendor == PCI_VENDOR_ID_TIMEDIA ) /* 0x1409 */
> - switch(idx) {
> - case 0: base_idx=0;
> - break;
> - case 1: base_idx=0; offset=8;
> - break;
> - case 2: base_idx=1;
> - break;
> - case 3: base_idx=1; offset=8;
> - break;
> - case 4: /* BAR 2*/
> - case 5: /* BAR 3 */
> - case 6: /* BAR 4*/
> - case 7: base_idx=idx-2; /* BAR 5*/
> - }
> -
> - port = pci_resource_start(dev, base_idx) + offset;
> -
> - if ((board->flags & SPCI_FL_BASE_TABLE) == 0)
> - port += idx * (board->uart_offset ? board->uart_offset : 8);
> -
> - if (pci_resource_flags (dev, base_idx) & IORESOURCE_IO) {
> - int high_bits_offset = ((sizeof(long)-sizeof(int))*8);
> - req->port = port;
> - if (high_bits_offset)
> - req->port_high = port >> high_bits_offset;
> - else
> - req->port_high = 0;
> - return 0;
> - }
> - req->io_type = SERIAL_IO_MEM;
> - req->iomem_base = ioremap(port, board->uart_offset);
> - req->iomem_reg_shift = board->reg_shift;
> - req->port = 0;
> - return req->iomem_base ? 0 : 1;
> -}
> -
> -/* Register the serial port(s) of a PCI card. */
> -static int __devinit serial_register (struct pci_dev *dev,
> - const struct pci_device_id *id)
> -{
> - struct pci_board_no_ids *board = &pci_boards[id->driver_data];
> - struct parport_serial_private *priv = pci_get_drvdata (dev);
> - struct serial_struct serial_req;
> - int base_baud;
> - int k;
> - int success = 0;
> -
> - priv->ser = *board;
> - if (board->init_fn && ((board->init_fn) (dev, board, 1) != 0))
> - return 1;
> -
> - base_baud = board->base_baud;
> - if (!base_baud)
> - base_baud = BASE_BAUD;
> - memset (&serial_req, 0, sizeof (serial_req));
> -
> - for (k = 0; k < board->num_ports; k++) {
> - int line;
> - serial_req.irq = dev->irq;
> - if (get_pci_port (dev, board, &serial_req, k))
> - break;
> - serial_req.flags = ASYNC_SKIP_TEST | ASYNC_AUTOPROBE;
> - serial_req.baud_base = base_baud;
> - line = register_serial (&serial_req);
> - if (line < 0) {
> - printk (KERN_DEBUG
> - "parport_serial: register_serial failed\n");
> - continue;
> - }
> - priv->line[priv->num_ser++] = line;
> - success = 1;
> - }
> -
> - return success ? 0 : 1;
> -}
> -
> -/* Register the parallel port(s) of a PCI card. */
> -static int __devinit parport_register (struct pci_dev *dev,
> - const struct pci_device_id *id)
> -{
> - struct parport_serial_private *priv = pci_get_drvdata (dev);
> - int i = id->driver_data, n;
> - int success = 0;
> -
> - if (cards[i].preinit_hook &&
> - cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
> - return -ENODEV;
> -
> - for (n = 0; n < cards[i].numports; n++) {
> - struct parport *port;
> - int lo = cards[i].addr[n].lo;
> - int hi = cards[i].addr[n].hi;
> - unsigned long io_lo, io_hi;
> - io_lo = pci_resource_start (dev, lo);
> - io_hi = 0;
> - if ((hi >= 0) && (hi <= 6))
> - io_hi = pci_resource_start (dev, hi);
> - else if (hi > 6)
> - io_lo += hi; /* Reinterpret the meaning of
> - "hi" as an offset (see SYBA
> - def.) */
> - /* TODO: test if sharing interrupts works */
> - printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, "
> - "I/O at %#lx(%#lx)\n",
> - parport_serial_pci_tbl[i].vendor,
> - parport_serial_pci_tbl[i].device, io_lo, io_hi);
> - port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
> - PARPORT_DMA_NONE, dev);
> - if (port) {
> - priv->port[priv->num_par++] = port;
> - success = 1;
> - }
> - }
> -
> - if (cards[i].postinit_hook)
> - cards[i].postinit_hook (dev, !success);
> -
> - return success ? 0 : 1;
> -}
> -
> -static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
> - const struct pci_device_id *id)
> -{
> - struct parport_serial_private *priv;
> - int err;
> -
> - priv = kmalloc (sizeof *priv, GFP_KERNEL);
> - if (!priv)
> - return -ENOMEM;
> - priv->num_ser = priv->num_par = 0;
> - pci_set_drvdata (dev, priv);
> -
> - err = pci_enable_device (dev);
> - if (err) {
> - pci_set_drvdata (dev, NULL);
> - kfree (priv);
> - return err;
> - }
> -
> - if (parport_register (dev, id)) {
> - pci_set_drvdata (dev, NULL);
> - kfree (priv);
> - return -ENODEV;
> - }
> -
> - if (serial_register (dev, id)) {
> - int i;
> - for (i = 0; i < priv->num_par; i++)
> - parport_pc_unregister_port (priv->port[i]);
> - pci_set_drvdata (dev, NULL);
> - kfree (priv);
> - return -ENODEV;
> - }
> -
> - return 0;
> -}
> -
> -static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
> -{
> - struct parport_serial_private *priv = pci_get_drvdata (dev);
> - int i;
> -
> - // Serial ports
> - for (i = 0; i < priv->num_ser; i++) {
> - unregister_serial (priv->line[i]);
> -
> - if (priv->ser.init_fn)
> - (priv->ser.init_fn) (dev, &priv->ser, 0);
> - }
> - pci_set_drvdata (dev, NULL);
> -
> - // Parallel ports
> - for (i = 0; i < priv->num_par; i++)
> - parport_pc_unregister_port (priv->port[i]);
> -
> - kfree (priv);
> - return;
> -}
> -
> -static struct pci_driver parport_serial_pci_driver = {
> - name: "parport_serial",
> - id_table: parport_serial_pci_tbl,
> - probe: parport_serial_pci_probe,
> - remove: __devexit_p(parport_serial_pci_remove),
> -};
> -
> -
> -static int __init parport_serial_init (void)
> -{
> - return pci_module_init (&parport_serial_pci_driver);
> -}
> -
> -static void __exit parport_serial_exit (void)
> -{
> - pci_unregister_driver (&parport_serial_pci_driver);
> - return;
> -}
> -
> -MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
> -MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
> -MODULE_LICENSE("GPL");
> -
> -module_init(parport_serial_init);
> -module_exit(parport_serial_exit);
>
>
> 01_netmos.patch :
>
> diff -urN linux-2.4.20-pre9-00_parport_serial/drivers/char/parport_serial.c linux-2.4.20-pre9/drivers/char/parport_serial.c
> --- linux-2.4.20-pre9-00_parport_serial/drivers/char/parport_serial.c Sat Oct 5 17:58:35 2002
> +++ linux-2.4.20-pre9/drivers/char/parport_serial.c Sat Oct 5 18:15:14 2002
> @@ -32,6 +32,8 @@
> enum parport_pc_pci_cards {
> titan_110l = 0,
> titan_210l,
> + netmos_9735,
> + netmos_9835,
> avlab_1s1p,
> avlab_1s1p_650,
> avlab_1s1p_850,
> @@ -70,6 +72,8 @@
> } cards[] __devinitdata = {
> /* titan_110l */ { 1, { { 3, -1 }, } },
> /* titan_210l */ { 1, { { 3, -1 }, } },
> + /* netmos_9735 (not tested) */ { 1, { { 2, -1 }, } },
> + /* netmos_9835 */ { 1, { { 2, -1 }, } },
> /* avlab_1s1p */ { 1, { { 1, 2}, } },
> /* avlab_1s1p_650 */ { 1, { { 1, 2}, } },
> /* avlab_1s1p_850 */ { 1, { { 1, 2}, } },
> @@ -92,6 +96,10 @@
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
> { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
> + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9735 },
> + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9835 },
> /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
> { 0x14db, 0x2110, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p},
> { 0x14db, 0x2111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_650},
> @@ -171,6 +179,8 @@
>
> /* titan_110l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 1, 921600 },
> /* titan_210l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 },
> +/* netmos_9735 (n/t)*/ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
> +/* netmos_9835 */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 },
> /* avlab_1s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> /* avlab_1s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> /* avlab_1s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 },
> diff -urN linux-2.4.20-pre9-00_parport_serial/drivers/parport/ChangeLog linux-2.4.20-pre9/drivers/parport/ChangeLog
> --- linux-2.4.20-pre9-00_parport_serial/drivers/parport/ChangeLog Sat Oct 5 17:58:35 2002
> +++ linux-2.4.20-pre9/drivers/parport/ChangeLog Sat Oct 5 18:23:05 2002
> @@ -3,6 +3,10 @@
> * parport_serial.c: Move from here to ../char/, must be initialised
> after serial.c for register_serial to work.
>
> + 2001-10-11 Tim Waugh <twaugh@redhat.com>
> + * parport_pc.c, parport_serial.c: Support for NetMos cards.
> + Patch originally from Michael Reinelt <reinelt@eunet.at>.
> +
> 2002-04-25 Tim Waugh <twaugh@redhat.com>
>
> * parport_serial.c, parport_pc.c: Move some SIIG cards around.
> diff -urN linux-2.4.20-pre9-00_parport_serial/drivers/parport/parport_pc.c linux-2.4.20-pre9/drivers/parport/parport_pc.c
> --- linux-2.4.20-pre9-00_parport_serial/drivers/parport/parport_pc.c Sat Oct 5 17:43:32 2002
> +++ linux-2.4.20-pre9/drivers/parport/parport_pc.c Sat Oct 5 18:12:20 2002
> @@ -2699,6 +2699,10 @@
> oxsemi_840,
> aks_0100,
> mobility_pp,
> + netmos_9705,
> + netmos_9805,
> + netmos_9815,
> + netmos_9855,
> };
>
>
> @@ -2768,6 +2772,10 @@
> /* oxsemi_840 */ { 1, { { 0, -1 }, } },
> /* aks_0100 */ { 1, { { 0, 1 }, } },
> /* mobility_pp */ { 1, { { 0, 1 }, } },
> + /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* untested */
> + /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* untested */
> + /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
> + /* netmos_9855 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
> };
>
> static struct pci_device_id parport_pc_pci_tbl[] __devinitdata = {
> @@ -2836,6 +2844,15 @@
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_840 },
> { PCI_VENDOR_ID_AKS, PCI_DEVICE_ID_AKS_ALADDINCARD,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 },
> + /* NetMos communication controllers */
> + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 },
> + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9805,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 },
> + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
> + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
> { 0, } /* terminate list */
> };
> MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl);
> diff -urN linux-2.4.20-pre9-00_parport_serial/include/linux/pci_ids.h linux-2.4.20-pre9/include/linux/pci_ids.h
> --- linux-2.4.20-pre9-00_parport_serial/include/linux/pci_ids.h Sat Oct 5 17:43:41 2002
> +++ linux-2.4.20-pre9/include/linux/pci_ids.h Sat Oct 5 18:09:44 2002
> @@ -1791,8 +1791,12 @@
> #define PCI_DEVICE_ID_HOLTEK_6565 0x6565
>
> #define PCI_VENDOR_ID_NETMOS 0x9710
> +#define PCI_DEVICE_ID_NETMOS_9705 0x9705
> #define PCI_DEVICE_ID_NETMOS_9735 0x9735
> +#define PCI_DEVICE_ID_NETMOS_9805 0x9805
> +#define PCI_DEVICE_ID_NETMOS_9815 0x9815
> #define PCI_DEVICE_ID_NETMOS_9835 0x9835
> +#define PCI_DEVICE_ID_NETMOS_9855 0x9855
>
> #define PCI_SUBVENDOR_ID_EXSYS 0xd84d
> #define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014
>
>
> --
> Jesper Juhl <juhl-lkml@dif.dk>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2004-06-13 22:08 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-13 11:19 Request: Netmos support in parport_serial for 2.4.27 Ryan Underwood
2004-06-13 12:39 ` Marcelo Tosatti
2004-06-13 20:30 ` Jesper Juhl
2004-06-13 21:04 ` Marcelo Tosatti
2004-06-13 22:07 ` Marcelo Tosatti [this message]
2004-06-14 4:10 ` Willy Tarreau
2004-06-14 4:51 ` Ryan Underwood
2004-06-14 14:59 ` Jesper Juhl
2004-06-21 1:49 ` Netmos 9835 in 2.6.x was " Marcelo Tosatti
2004-06-21 2:08 ` Andrew Morton
2004-06-14 8:20 ` Jesper Juhl
2004-06-13 13:05 ` Pavel Janík
2004-06-13 14:25 ` Willy Tarreau
2004-06-13 19:15 ` Jesper Juhl
2004-06-13 19:24 ` Jesper Juhl
[not found] <20040613171701.1750.70973.Mailman@linux.us.dell.com>
2004-06-14 4:44 ` Ryan Underwood
2004-06-15 14:06 ` Marcelo Tosatti
2004-06-16 11:50 ` Ryan Underwood
[not found] ` <20040616172421.GD8703@logos.cnet>
2004-06-17 2:33 ` Ryan Underwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040613220727.GB4771@logos.cnet \
--to=marcelo.tosatti@cyclades.com \
--cc=juhl-lkml@dif.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=nemesis-lists@icequake.net \
--cc=twaugh@redhat.com \
--cc=willy@w.ods.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox