[2.6.7-mm1] Firewire sbp2 problem

[2.6.7-mm1] Firewire sbp2 problem

[Andre Eisenbach]

Hey there! 
 
 I have a firewire hard drive which I have previously used with an earlier 
kernel. However, after a recent OS reinstall, I cannot access the drive 
anymore. 
 
 Here is the related dmsg output: 
 
ieee1394: raw1394: /dev/raw1394 device initialized 
 ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000bcd009e53243d] 
 ieee1394: Error parsing configrom for node 0-01:1023 
 ieee1394: The root node is not cycle master capable; selecting a new root 
node and resetting... 
 ieee1394: Error parsing configrom for node 0-00:1023 
 ieee1394: Node changed: 0-00:1023 -> 0-01:1023 
 sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>

 Note that there is no further report from sbp2. Nothing happens. 
 
 I'm using kernel 2.6.7-mm1. 
 
 IEEE1394 related config options: 

# IEEE 1394 (FireWire) support 
 CONFIG_IEEE1394=y 
 # CONFIG_IEEE1394_VERBOSEDEBUG is not set 
 CONFIG_IEEE1394_OUI_DB=y 
 # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set 
 CONFIG_IEEE1394_PCILYNX=y 
 CONFIG_IEEE1394_OHCI1394=y 
 CONFIG_IEEE1394_VIDEO1394=y 
 CONFIG_IEEE1394_SBP2=m 
 # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set 
 # CONFIG_IEEE1394_ETH1394 is not set 
 CONFIG_IEEE1394_DV1394=y 
 CONFIG_IEEE1394_RAWIO=y 
 # CONFIG_IEEE1394_CMP is not set

 
 SCSI related: 
 
CONFIG_BLK_DEV_IDESCSI=y 
 CONFIG_SCSI=y 
 CONFIG_SCSI_PROC_FS=y 
 CONFIG_BLK_DEV_SD=y

 
 Dont know what to do anymore  
 The firewire hard drive contains the backup of my previous gentoo 
installation. I *need* that data . 
 
 Thanks for your help...

Re: [2.6.7-mm1] Firewire sbp2 problem

[Guido Guenther]

On Mon, Jun 21, 2004 at 01:25:23AM -0700, Andre Eisenbach wrote:
> Hey there! 
>  
>  I have a firewire hard drive which I have previously used with an earlier 
> kernel. However, after a recent OS reinstall, I cannot access the drive 
> anymore. 
>  
>  Here is the related dmsg output: 
>  
> ieee1394: raw1394: /dev/raw1394 device initialized 
>  ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000bcd009e53243d] 
>  ieee1394: Error parsing configrom for node 0-01:1023 
>  ieee1394: The root node is not cycle master capable; selecting a new root 
> node and resetting... 
>  ieee1394: Error parsing configrom for node 0-00:1023 
>  ieee1394: Node changed: 0-00:1023 -> 0-01:1023 
>  sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
> 
>  Note that there is no further report from sbp2. Nothing happens. 
>  
>  I'm using kernel 2.6.7-mm1. 
Same here with 2.6.9-rc1-bk16 on a 12" pbook.
 -- Guido