* 2.6.7-mm1
@ 2004-06-21 0:46 Andrew Morton
2004-06-21 1:40 ` 2.6.7-mm1: empty help text for FB_RIVA_I2C Adrian Bunk
` (8 more replies)
0 siblings, 9 replies; 23+ messages in thread
From: Andrew Morton @ 2004-06-21 0:46 UTC (permalink / raw)
To: linux-kernel
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm1/
- Added a new vm tunable: /proc/sys/vm/vfs-cache-pressure.
This allows tuning of the kernel's preference for reclaiming VFS caches
versus pagecache.
vfs-cache-pressure=0: dentry and inode caches aren't reclaimed at all
vfs-cache-pressure=100: default - current behaviour
vfs-cache-pressure > 100: reclaim the VFS caches harder.
It seems that large values of vfs-cache-pressure are needed to make much
difference: 1000 or more.
- Under some circumstances the current page reclaim code can hold
interrupts off for a long time. That is fixed here.
- I went through and dropped a bunch of patches which don't seem to be very
useful now - mainly debug stuff.
- Various driver updates and random fixes
Changes since 2.6.7-rc3-mm2:
linus.patch
bk-agpgart.patch
bk-alsa.patch
bk-cpufreq.patch
bk-input.patch
bk-libata.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-pcmcia.patch
bk-scsi.patch
External trees. bk-driver-core is in disgrace due to rejects against
bk-scsi.
-mp_find_ioapic-must-not-be-__init.patch
-prism94-build-fix.patch
-mp_find_ioapic-oops-fix.patch
-85xx+e500.l26-20040608.patch
-ppc32-irqc-cpumask-fix.patch
-ppc64-fix-out_be64.patch
-non-readable-binaries.patch
-binfmt_misc-credentials.patch
-siimage-update.patch
-clean-up-asm-pgalloch-include.patch
-clean-up-asm-pgalloch-include-2.patch
-clean-up-asm-pgalloch-include-3.patch
-ppc64-uninline-__pte_free_tlb.patch
-fix-scancode-keycode-scancode-conversion-for-265.patch
-reiserfs-group-alloc-9.patch
-reiserfs-block-allocator-should-not-inherit-packing-locality.patch
-reiserfs-remove-debugging-warning-from-block-allocator.patch
-reiserfs-group-alloc-9-build-fix.patch
-reiserfs-search_reada-5.patch
-reiserfs-data-logging-support.patch
-idr-overflow-fixes.patch
-idr-remove-counter.patch
-idr-fixups.patch
-use-idr_get_new-to-allocate-a-bus-id-in-drivers-i2c-i2c-corec-update-to-new-api.patch
-rlim-add-rlimit-entry-for-controlling-queued-signals.patch
-rlim-add-sigpending-field-to-user_struct.patch
-rlim-pass-task_struct-in-send_signal.patch
-rlim-add-simple-get_uid-helper.patch
-rlim-enforce-rlimits-on-queued-signals.patch
-rlim-remove-unused-queued_signals-global-accounting.patch
-rlim-add-rlimit-entry-for-posix-mqueue-allocation.patch
-rlim-add-mq_bytes-to-user_struct.patch
-rlim-add-mq_attr_ok-helper.patch
-rlim-enforce-rlimits-for-posix-mqueue-allocation.patch
-rlim-adjust-default-mqueue-sizes.patch
-hpet-driver.patch
-hpet-driver-updates.patch
-fix-hpet-for-acpi-changes.patch
-hpet-kconfig-loop-fix.patch
-hpet-rtc-dependency-fix.patch
-hpet-free_irq-deadlock-fix.patch
-hpet-dont-use-new-major.patch
-kill-off-pc9800.patch
-more-pc9800-removal.patch
-pc9800-merge-std_resourcesc-back-into-setupc.patch
-ext3-retry-allocation-after-transaction-commit-v2.patch
-ext3-retry-allocation-after-transaction-commit-v2-jbd-api.patch
-pty-allocation-first-fit.patch
-dynpty-fix.patch
-2-3-small-tweaks-to-standard-resource-stuff.patch
-3-3-same-small-tweaks-x86_64-version.patch
-sis900-fix-phy-transceiver-detection.patch
-getgroups16-fix.patch
-check-return-status-of-register-calls-in-i82365.patch
-invalidate_inodes2-mark-pages-notuptodate.patch
-reiserfs-v3-logging-bug-for-blocksize-page-size.patch
-read-vs-truncate-race.patch
-cleanups-for-apic.patch
-remove-apic_lockup_debug.patch
-remove-io_apic_sync.patch
-ach1542-mca-build-fix.patch
-validate-pm-timer-rate-at-boot-time.patch
-fix-3c59xc-to-allow-3c905c-100bt-fd.patch
-first-cut-at-fixing-the-3c59x-power-mismanagment.patch
-kbuild-specify-default-target-during-configuration.patch
-bsd-accounting-format-rework.patch
-bsd-accounting-format-rework-update.patch
-iso9660-inodes-beyond-4gb.patch
-iso9660-inodes-beyond-4gb-fixes.patch
-iso9660-comment-cleanup.patch
-iso9660-inodes-anywhere-and-nfs.patch
-sisfb-update-1710.patch
-sisfb-update-1710-fixes.patch
-sisfb-build-fix.patch
-nfs-writepage-fix.patch
-3c59x-support-for-ati-radeon-9100-igp.patch
-1-5-device-mapper-dm-ioc.patch
-dm-cache-flushing-fix.patch
-2-5-device-mapper-kcopyd.patch
-dm-1-5-kcopyd-remove-superfluous-init_list_heads.patch
-dm-2-5-kcopyd-no-need-to-lock-pages.patch
-2-5-device-mapper-kcopyd-docs.patch
-3-5-device-mapper-snapshots.patch
-dm-3-5-fix-error-cleanup-in-dm_create_persistent.patch
-4-5-device-mapper-mirroring.patch
-5-5-device-mapper-dm-zero.patch
-dm-4-5-dm-zero-version.patch
-dm-zero-flushing-fix.patch
-dm-5-5-documentation.patch
-let-serial_8250_acpi-depend-on-acpi_pci-2.patch
-export-acpi_register_gsi.patch
-submission-of-via-velocitytm-series-adapter-driver.patch
-via-velocity-oops-fix.patch
-fb-accel-capabilities.patch
-fbcon-prefer-pan-when-available.patch
-rawdev-driver-2.patch
-msi-target-cpus-fix.patch
-x86_64-numa-build-fix.patch
-i386-uninline-bitops.patch
-apic-enumeration-fixes.patch
-apic-fix-kicking-of-non-present-cpus.patch
-apic-remove-marking-of-non-present-physids-in-phys_cpu_present_map.patch
-apic-make-mach_default-compile-again.patch
-use-numa-policy-api-for-boot-time-policy.patch
-266-memory-allocation-checks-in-eth1394_update.patch
-266-memory-allocation-checks-in-mtdblock_open.patch
-memory-allocation-checks-in-cs46xx_dsp_proc_register_scb_desc.patch
-dont-create-cpu-online-sysfs-file.patch
-checkstack-fixes.patch
-sys-getdents64-needs-compat-wrapper.patch
-remap_file_pages-speedup.patch
-wanxl-firmware-build-fix.patch
-cciss-ioctl32-update.patch
-fix-cdrom-mt-rainier-probe.patch
-blk-move-threshold-unplugging.patch
-fix-memory-leak-in-swsusp.patch
-pmdisk-memleak-fix.patch
-swsusp-remove-memsets.patch
-swsusp-remove-copy_pagedir.patch
-decrease-stack-usage-in-ncpfss-ioctl.patch
-staticalise-update_one_process.patch
-267-rc3-drivers-char-ipmi-ipmi_devintfc-user-kernel.patch
-267-rc3-drivers-scsi-megaraidc-user-kernel-pointer-bugs.patch
-ia64-discontic-fix.patch
-epoll-uses-rbtrees.patch
-larger-io-bitmap.patch
-permit-inode-dentry-hash-tables-to-be-allocated-max_order-size-warning-fix.patch
-respect-edge-level-triggering-requested-in-acpi_register_gsi.patch
-ide-pci-hotplugging-fixes.patch
-ide-kill-some-useless-headers-for-pci-drivers.patch
-ide-ide-proc-fix-for-m68k.patch
-ide-kill-hw_regs_t-dma.patch
-ide-ide-pnp-update.patch
-ide-remove-alternate_state_diagram_multi_out-from-ide-taskfilec.patch
-ide-fix-ide-cd-to-not-retry-req_drive_taskfile-requests.patch
-ide-fix-req_drive_-requests-error-handling-in-ide-scsi.patch
-ide-cleanup-taskfile-pio-handlers-config_ide_taskfile_io=n.patch
-ide-tiny-task_mulout_intr-config_ide_taskfile_io=n-cleanup.patch
-ide-kill-task_map_rq.patch
-ide-check-no-of-sectors-for-in-out-commands-in-ide_diag_taskfile.patch
-revert-sched-improve-wakeup-affinity.patch
-shiftpgup-if-nr-of-scrolled-lines-is-4.patch
-istallion-printk-fix.patch
-pcwdc-patches.patch
-usb-tt-oops-fix.patch
-fix-x86-64-via-systems-with-iommu-debug.patch
-lower-priority-of-too-many-keys-msg-in-atkbdc.patch
-remove-irda-usage-of-isa_virt_to_bus.patch
-unregister-driver-if-probing-fails-in-sb_cardc.patch
-ignore-errors-from-tw_setfeature-in-3w-xxxxc.patch
-fake-inquiry-for-sony-clie-peg-tj25-in-unusual_devsh.patch
-fix-duplicate-environment-variables-passed-to-init.patch
-fix-handling-of--embedded-in-filenames-in-isofs.patch
-fix-isofs-ignoring-noexec-and-mode-mount-options.patch
-fix-thread_infoh-ignoring-__have_thread_functions.patch
-sparse-fix-to-mm-vmscanc.patch
Merged
+ext3-jbd-needs-to-wait-for-locked-buffers.patch
ext3 locking fix
+ppc64-build-fix.patch
+ppc64-eeh-warning-fix.patch
PPC64 fixes
-pdflush-diag.patch
-pci_set_power_state-might-sleep.patch
-slab-leak-detector.patch
-local_bh_enable-warning-fix.patch
-cond_resched-might-sleep.patch
-poll-select-longer-timeouts.patch
-poll-select-range-check-fix.patch
-poll-select-handle-large-timeouts.patch
-add-a-slab-for-ethernet.patch
-shm-do_munmap-check.patch
-stack-overflow-test-fix.patch
-call-might_sleep-in-tasklet_kill.patch
-abs-cleanup.patch
Dropped
-ext3-reservation-ifdef-cleanup-patch.patch
-ext3-reservation-max-window-size-check-patch.patch
-ext3-reservation-file-ioctl-fix.patch
Folded into ext3_rsv_base.patch
-ext3-reservation-bad-inode-fix.patch
-ext3_reservation_discard_race_fix.patch
Folded into ext3-lazy-discard-reservation-window-patch.patch
+larger-io-bitmap.patch
Support for larger iopl() address ranges
-disk-barrier-core-tweaks.patch
Folded into disk-barrier-core.patch
-disk-barrier-ide-symbol-expoprt.patch
-disk-barrier-ide-warning-fix.patch
Folded into disk-barrier-ide.patch
-reiserfs-v3-barrier-support-tweak.patch
Folded into reiserfs-v3-barrier-support.patch
+singly-linked-rcu.patch
+rcu-no-arg.patch
+rcu-no-arg-fix.patch
rcu_head shrinkage
-perfctr-disabled-build-fix.patch
Folded into perfctr-core.patch
-perfctr-if-ifdef-cleanup.patch
-perfctr-dothan-support.patch
Folded into perfctr-i386.patch
+nx-update.patch
Update to nx-2.6.7-rc2-bk2-AF.patch
-irqaction-use-cpumask-voyager-fix.patch
Folded into irqaction-use-cpumask.patch
-fix-and-reenable-msi-support-on-x86_64-fix.patch
Folded into fix-and-reenable-msi-support-on-x86_64.patch
+permit-inode-dentry-hash-tables-to-be-allocated-max_order-size-update.patch
Allocate VFS hash tables from bootmem
+vmscan-shuffle-things-around.patch
vmscan.c cleanup
+vmscan-scan-sanity.patch
Remove the "try to keep the inactive list 1/3rd of the size of the active
list" "logic". Try to do something meaningful instead.
+vmscan-dont-reclaim-too-many-pages.patch
Avoid possible excessive reclaim
+vfs-shrinkage-tuning.patch
Add /proc/sys/vm/vfs-cache-pressure
+ppp_syncttyc-receive-write_wakeup-fix.patch
PPP fix
+ide-stack-reduction.patch
+ide-stack-reduction-cleanup.patch
IDE stack reduction
+airo-broke.patch
airo.c fix
+jfs-build-fix.patch
JFS compile fix
+hid-tmff-fix-again.patch
Fix USB breakage
+swapoff-activate-pages.patch
Move pages to the active list during swapoff
+add-ovcamchip-driver.patch
Add a new driver of OmniVision OV6xx0 and OV7xx0 image sensors
+dnotify-remove-dn_lock.patch
dnotify SMp scalability improvement
+uninline-machine_specific_memory_setup.patch
Fix sparse warnings
+dont-writeback-fd-bdev-inodes.patch
Address a umount-vs-writeback oops
+add-wait_event_interruptible_exclusive-macro.patch
Add wait_event_interruptible_exclusive()
+fancy-wakeups-in-wait-h.patch
Switch all the wait.h macros over to prepare_to_wait/finish_wait
+iommu-max-segment-size.patch
Tweak the BIO layer to understand device iommu limitations
+input-psmouse-resync-for-kvm-users.patch
+input-psmouse-state-locking.patch
+input-serio-connect-disconnect-mandatory.patch
+input-serio-renames-1.patch
+input-serio-renames-1-fix.patch
+input-serio-renames-2.patch
+input-serio-dynamic-allocation.patch
+input-serio-dynamic-allocation-fix.patch
+input-serio-dynamic-allocation-fix-2.patch
+input-serio-dynamic-allocation-fix-3.patch
+input-serio-no-recursion.patch
+input-serio-sysfs-integration.patch
+input-serio-allow-rebinding.patch
+input-serio-manual-bind.patch
+input-serio_raw-driver.patch
input driver updates
+v4l-v4l2-api-updates.patch
+v4l-update-video-buf-for-per-frame-input-switching.patch
+v4l-video-buf-magic-numbers.patch
+v4l-video-buf-fixes.patch
+v4l-msp3400-cleanup.patch
+v4l-ir-common-update.patch
+v4l-tuner-tda9887-updates.patch
+v4l-bttv-driver-update.patch
+v4l-ir-input-driver-update.patch
+saa7134-update.patch
+v4l-cx88-driver-update.patch
+v4l-radio-zoltrix-fix.patch
video-for-linux updates
+fix-isdn-to-not-assume-memio-return-values.patch
ISDN cleanup
+sys_ioctl-export.patch
export sys_ioctl() to modules (for compat handlers)
+buddy-reordering.patch
Diddle the page allocator to make DMA segment merging more successful
+mprotect-propagate-anon_vma.patch
mprotect fix
+sparsify-quotactl.patch
Add __user annotations
+fix-possible-stack-corruption-during-reiserfs_file_write.patch
reiserfs fix
+numa-api-updates.patch
NUMA API fixes
+isp16-check_region-removal.patch
Remove some check_region() warnings
+deadline-docco.patch
Document the deadline I/O scheduler and its tunables.
+move-as-docco.patch
Move the anticipatory scheduler documentation into Documentation/block
+credits-update.patch
Update ./CREDITS
+hwcache-align-kmalloc-caches.patch
slab.c tweaks
+reduce-function-inlining-in-slabc.patch
slab.c uninlinings
+nls-support-for-ascii.patch
Add a new NLS for ascii
+mips-remove-old-junk.patch
+ds1286-cleanups.patch
+cobalt-lcd-driver-update.patch
+add-m48t35-rtc-driver.patch
mips things
+farsync-warning-fix.patch
Fix a warning
+sparc64-bug-needs-compiler-h.patch
sparc64 warning fix
+jfs-warning-fix.patch
JFS warning fix
+velocity-warning-fixes.patch
+velocity-warning-fixes-2.patch
+velocity-warning-fixes-3.patch
+velocity-warning-fixes-4.patch
Various warning fixes for via-velocity.c
+abs-fix.patch
Provide a single implementation of abs() in kernel.h, kill various provate
implementations.
+lindent-rwsem.patch
Feed rwsem code through Lindent
+tdfxb-warning-fix.patch
Fix a warning
+ide-taskfilec-fixups-cleanups.patch
+ide-end-request-fix-for-config_ide_taskfile_io=y-pio-handlers.patch
+ide-pio-in-drive-busy-fix-config_ide_taskfile_io=y.patch
+ide-check-drive-mult_count-in-flagged_taskfile.patch
+ide-last-irq-fix-for-task_mulout_intr-config_ide_taskfile_io=n.patch
+ide-remove-dtf-debugging-printks-from-ide-taskfilec.patch
+ide-add-task_multi_sectors-to-ide-taskfilec.patch
+ide-split-task_sectors-and-task_multi_sectors.patch
+ide-dont-clear-rq-errors-for-req_drive_taskfile-requests.patch
+ide-use-task_buffer_sectors-in-ide-taskfilec.patch
+ide-pio-out-setup-fixes-config_ide_taskfile_io=n.patch
IDE update
+idrh-path.patch
Fix a comment
+wanxl-firmware-build-fix.patch
Fix allmodconfig build
+avoid-rebuild-of-ikcfg-when-using-o=.patch
+kbuild-add-deb-pkg-target.patch
kbuild updates
+x86_64-double-clock-speed-fix.patch
Revert the ACPI change which makes Opteron timekeeping run too fast
+sysfs-overflow-debug.patch
Add debug traps for sysfs show() handlers which overrun theor buffer.
+fix-smbfs-readdir-oops.patch
+remove-smbfs-server-rcls-err.patch
smbfs fixes and cleanups
+kallsyms-exclude.patch
+kallsyms-verify.patch
Fix a few awkward kallsyms problems.
All 226 patches:
linus.patch
sysfs-leaves-mount.patch
sysfs backing store: add sysfs_dirent
sysfs-leaves-dir.patch
sysfs backing store: add sysfs_dirent
sysfs-leaves-file.patch
sysfs backing store: sysfs_create() changes
sysfs-leaves-bin.patch
sysfs backing store: bin attribute changes
sysfs-leaves-symlink.patch
sysfs backing store: sysfs_create_link changes
sysfs-leaves-misc.patch
sysfs backing store: attribute groups and misc routines
opti92x-ad1848-locking-fix.patch
opti92x-ad1848.c locking fix
ext3-jbd-needs-to-wait-for-locked-buffers.patch
jbd needs to wait for locked buffers
bk-agpgart.patch
bk-alsa.patch
bk-cpufreq.patch
bk-input.patch
bk-libata.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-pcmcia.patch
bk-scsi.patch
mm.patch
add -mmN to EXTRAVERSION
bk-input-build-fix.patch
bk-input-build-fix
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-ia64-support.patch
IA64 kgdb support
ia64 kgdb repair and cleanup
make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock
radix_tree_tag_set-atomic.patch
Make radix_tree_tag_set/clear atomic wrt the tag
radix_tree_tag_set-only-needs-read_lock.patch
radix_tree_tag_set only needs read_lock()
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix-update-5.patch
must-fix update
mustfix-lists.patch
mustfix lists
ppc64-build-fix.patch
ppc64 CONFIG_ALTIVEC=n build fix
ppc64-eeh-warning-fix.patch
ppc64: eeh.h warning-fix
ppc64-reloc_hide.patch
invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes
config_spinline.patch
uninline spinlocks for profiling accuracy.
allow-i386-to-reenable-interrupts-on-lock-contention.patch
Allow i386 to reenable interrupts on lock contention
get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem
schedstats.patch
sched: scheduler statistics
fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card
pid_max-fix.patch
Bug when setting pid_max > 32k
jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
oops-dump-preceding-code.patch
i386 oops output: dump preceding code
lockmeter.patch
lockmeter
ia64 CONFIG_LOCKMETER fix
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
ext3_rsv_cleanup.patch
ext3 block reservation patch set -- ext3 preallocation cleanup
ext3_rsv_base.patch
ext3 block reservation patch set -- ext3 block reservation
ext3 reservations: fix performance regression
ext3 block reservation patch set -- mount and ioctl feature
ext3 block reservation patch set -- dynamically increase reservation window
ext3 reservation ifdef cleanup patch
ext3 reservation max window size check patch
ext3 reservation file ioctl fix
ext3-reservation-default-on.patch
ext3 reservation: default to on
ext3-lazy-discard-reservation-window-patch.patch
ext3 lazy discard reservation window patch
ext3 discard reservation in last iput fix patch
Fix lazy reservation discard
ext3 reservations: bad_inode fix
ext3 reservation discard race fix
hugetlb_shm_group-sysctl-gid-0-fix.patch
hugetlb_shm_group sysctl-gid-0-fix
larger-io-bitmap.patch
larger IO bitmaps
really-ptrace-single-step-2.patch
ptrace single-stepping fix
ftruncate-vs-block_write_full_page.patch
ftruncate vs block_write_full_page race fix
ia32-fault-deadlock-fix-2.patch
ia32: fix deadlocks when oopsing while mmap_sem is held
ppc64-fault-deadlock-fix-2.patch
ppc64: fix deadlocks when oopsing while mmap_sem is held
SL0-core-RC6-bk5.patch
symlinks: infrastructure
SL1-ext2-RC6-bk5.patch
symlinks: ext2 conversion
SL2-trivial-RC6-bk5.patch
symlinks: trivial cases
SL3-page-RC6-bk5.patch
symlinks: reuse new helpers
SL4-smb-RC6-bk5.patch
symlinks: smbfs
SL5-xfs-RC6-bk5.patch
symlinks: XFS
SL6-shm-RC6-bk5.patch
symlinks: tmpfs
SL7-befs-RC6-bk5.patch
symlinks: befs
SL8-jffs2-RC6-bk5.patch
symlinks: jffs2
ipr-ppc64-depends.patch
Make ipr.c require ppc
disk-barrier-core.patch
disk barriers: core
disk-barrier-core-tweaks
disk-barrier-ide.patch
disk barriers: IDE
disk-barrier-ide-symbol-expoprt
disk-barrier ide warning fix
barrier-update.patch
barrier update
disk-barrier-scsi.patch
disk barriers: scsi
disk-barrier-dm.patch
disk barriers: devicemapper
disk-barrier-md.patch
disk barriers: MD
reiserfs-v3-barrier-support.patch
reiserfs v3 barrier support
reiserfs-v3-barrier-support-tweak
sync_dirty_buffer-retval.patch
make sync_dirty_buffer() return something useful
ext3-barrier-support.patch
ext3 barrier support
jbd-barrier-fallback-on-failure.patch
jbd: barrier fallback on failure
ide-print-failed-opcode.patch
ide: print failed opcode on IO errors
add-bh_eopnotsupp-for-testing.patch
add BH_Eopnotsupp for testing async barrier failures
handle-async-barrier-failures.patch
Handle async barrier failures
x86-stack-dump-fixes.patch
x86 stack dump fixes
reduce-tlb-flushing-during-process-migration.patch
Reduce TLB flushing during process migration
reduce-tlb-flushing-during-process-migration-oops-fix.patch
reduce-tlb-flushing-during-process-migration oops fix
Move-saved_command_line-to-init-mainc.patch
Move saved_command_line to init/main.c
arch/i386/boot/compressed/misc.c warning fixes
rcu-lock-update-add-per-cpu-batch-counter.patch
rcu lock update: Add per-cpu batch counter
rcu-lock-update-use-a-sequence-lock-for-starting-batches.patch
rcu lock update: Use a sequence lock for starting batches
rcu-lock-update-code-move-cleanup.patch
rcu lock update: Code move & cleanup
singly-linked-rcu.patch
reduce rcu_head size - core
rcu-no-arg.patch
rcu: avoid passing an argument to the callback function
rcu-no-arg-fix.patch
reduce rcu_head size fix
pcm_native-stack-reduction.patch
pcm_native.c stack reduction
enable-suspend-resuming-of-e1000.patch
Enable suspend/resuming of e1000
tty_io-hangup-locking.patch
tty_io.c hangup locking
perfctr-core.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][1/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: core
CONFIG_PERFCTR=n build fix
perfctr-i386.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][2/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: i386
perfctr #if/#ifdef cleanup
perfctr Dothan support
perfctr-x86_64.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][3/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: x86_64
perfctr-ppc.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][4/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: PowerPC
perfctr-virtualised-counters.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][5/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: virtualised counters
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-cpus_complement-fix.patch
perfctr-cpus_complement-fix
perfctr-cpumask-cleanup.patch
perfctr cpumask cleanup
perfctr-misc.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][6/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: misc
nx-2.6.7-rc2-bk2-AF.patch
NX (No eXecute) support for x86
nx-update.patch
nx update
cpumask-1-10-cpu_present_map-real-even-on-non-smp.patch
cpumask 1/10 cpu_present_map real even on non-smp
cpumask-2-10-bitmap-cleanup-preparation-for-cpumask.patch
cpumask 2/10 bitmap cleanup preparation for cpumask overhaul
cpumask-3-10-bitmap-inlining-and-optimizations.patch
cpumask 3/10 bitmap inlining and optimizations
cpumask-5-10-rewrite-cpumaskh-single-bitmap-based.patch
cpumask 5/10 rewrite cpumask.h - single bitmap based implementation
cpumask-5-10-rewrite-cpumaskh-single-bitmap-based-cpu_mask_none-fix.patch
CPU_MASK_NONE fix
s390-fix-cpu_online-redefined-warnings.patch
s390: fix "cpu_online" redefined warnings
cpumask-6-10-remove-26-no-longer-used-cpumaskh-files.patch
cpumask 6/10 remove 26 no longer used cpumask*.h files
cpumask-7-10-remove-obsolete-cpumask-macro-uses-i386-arch.patch
cpumask 7/10 remove obsolete cpumask macro uses - i386 arch
cpumask-8-10-remove-obsolete-cpumask-macro-uses-other.patch
cpumask 8/10 remove obsolete cpumask macro uses - other archs
x86_64-cpu_online-fix.patch
x86_64-cpu_online-fix
ppc64-cpu_online-fix.patch
ppc64: cpu_online fix
cpumask-9-10-remove-no-longer-used-obsolete-macro-emulation.patch
cpumask 9/10 Remove no longer used obsolete macro emulation
cpumask-10-10-optimize-various-uses-of-new-cpumasks.patch
cpumask 10/10 optimize various uses of new cpumasks
cpumask-11-10-comment-spacing-tweaks.patch
cpumask: comment, spacing tweaks
cleanup-cpumask_t-temporaries.patch
clean up cpumask_t temporaries
alpha-cpumask-fix.patch
alpha: cpumask fixups
irqaction-use-cpumask.patch
make irqaction use a cpu mask
Fix irqaction-use-cpumask.patch for voyager
fix-and-reenable-msi-support-on-x86_64.patch
Fix and Reenable MSI Support on x86_64
Fix and Reenable MSI Support on x86_64 fix
export-dmi-check-functions.patch
export DMI check functions
hp-pavilion-use-dmi-api.patch
use new DMI API for HP Pavilion
pcmcia-enable-read-prefetch-on-o2micro-bridges-to-fix-hdsp.patch
pcmcia: enable read prefetch on o2micro bridges to fix HDSP
ext3-online-resize-patch.patch
ext3: online resizing
ext3-online-resize-warning-fix.patch
ext3-online-resize-warning-fix
permit-inode-dentry-hash-tables-to-be-allocated-max_order-size.patch
Permit inode & dentry hash tables to be allocated > MAX_ORDER size
permit-inode-dentry-hash-tables-to-be-allocated-max_order-size-warning-fix
permit-inode-dentry-hash-tables-to-be-allocated-max_order-size-update.patch
Subject: Re: [PATCH] Permit inode & dentry hash tables to be allocated > MAX_ORDER size [try #3]
improved-psx-support-in-input-joystick-gameconc.patch
improved PSX support in input/joystick/gamecon.c
o_noatime-support.patch
O_NOATIME support
vmscan-shuffle-things-around.patch
vmscan.c: shuffle things around
vmscan-scan-sanity.patch
vmscan.c scan rate fixes
vmscan-dont-reclaim-too-many-pages.patch
vmscan.c: dont reclaim too many pages
vfs-shrinkage-tuning.patch
vm: vfs shrinkage tuning
ppp_syncttyc-receive-write_wakeup-fix.patch
ppp_synctty.c receive/write_wakeup fix
ide-stack-reduction.patch
IDE stack reduction
ide-stack-reduction-cleanup.patch
ide-stack-reduction-cleanup
airo-broke.patch
airo.c broke
jfs-build-fix.patch
jfs build fix
hid-tmff-fix-again.patch
hid-tmff fix again
swapoff-activate-pages.patch
swapoff-activate-pages
add-ovcamchip-driver.patch
Add ovcamchip driver
dnotify-remove-dn_lock.patch
dnotify.c: use inode->i_lock in place of dn_lock
uninline-machine_specific_memory_setup.patch
Uninline machine_specific_memory_setup()
dont-writeback-fd-bdev-inodes.patch
dont-writeback-fd-bdev-inodes
add-wait_event_interruptible_exclusive-macro.patch
add wait_event_interruptible_exclusive() macro
fancy-wakeups-in-wait-h.patch
Use fancy wakeups in wait.h
iommu-max-segment-size.patch
iommu max segment size
input-psmouse-resync-for-kvm-users.patch
input: psmouse resync for KVM users
input-psmouse-state-locking.patch
input: psmouse state locking
input-serio-connect-disconnect-mandatory.patch
input: serio connect/disconnect mandatory
input-serio-renames-1.patch
input: serio renames 1
input-serio-renames-1-fix.patch
input-serio-renames-1-fix
input-serio-renames-2.patch
input: serio renames 2
input-serio-dynamic-allocation.patch
input: serio dynamic allocation
input-serio-dynamic-allocation-fix.patch
input-serio-dynamic-allocation-fix
input-serio-dynamic-allocation-fix-2.patch
input-serio-dynamic-allocation-fix-2
input-serio-dynamic-allocation-fix-3.patch
input-serio-dynamic-allocation-fix-3
input-serio-no-recursion.patch
input: serio no recursion
input-serio-sysfs-integration.patch
input: serio sysfs integration
input-serio-allow-rebinding.patch
input: serio allow rebinding
input-serio-manual-bind.patch
input: serio manual bind
input-serio_raw-driver.patch
input: serio_raw driver
v4l-v4l2-api-updates.patch
v4l: v4l2 API updates
v4l-update-video-buf-for-per-frame-input-switching.patch
v4l: update video-buf for per-frame input switching.
v4l-video-buf-magic-numbers.patch
v4l: video-buf magic numbers
v4l-video-buf-fixes.patch
v4l: video-buf fixes.
v4l-msp3400-cleanup.patch
v4l: msp3400 cleanup.
v4l-ir-common-update.patch
v4l: ir-common update
v4l-tuner-tda9887-updates.patch
v4l: tuner + tda9887 updates
v4l-bttv-driver-update.patch
v4l: bttv driver update
v4l-ir-input-driver-update.patch
v4l: IR input driver update.
saa7134-update.patch
saa7134 driver update
v4l-cx88-driver-update.patch
v4l: cx88 driver update
v4l-radio-zoltrix-fix.patch
v4l: radio-zoltrix fix.
fix-isdn-to-not-assume-memio-return-values.patch
fix isdn to not assume mem*io return values
sys_ioctl-export.patch
export sys_ioctl to modules
buddy-reordering.patch
tweak the buddy allocator for better I/O merging
mprotect-propagate-anon_vma.patch
mprotect propagate anon_vma
sparsify-quotactl.patch
sparse annotation for sys_quotactl()
fix-possible-stack-corruption-during-reiserfs_file_write.patch
fix possible stack corruption during reiserfs_file_write
numa-api-updates.patch
NUMA API updates
isp16-check_region-removal.patch
isp16 check_region() removal
deadline-docco.patch
deadline I/O scheduler documentation
move-as-docco.patch
move-as-docco
credits-update.patch
CREDITS update
hwcache-align-kmalloc-caches.patch
hwcache align kmalloc caches
reduce-function-inlining-in-slabc.patch
reduce function inlining in slab.c
nls-support-for-ascii.patch
NLS support for ASCII
mips-remove-old-junk.patch
mips: remove old junk
ds1286-cleanups.patch
DS1286 cleanups
cobalt-lcd-driver-update.patch
Cobalt LCD Driver update
add-m48t35-rtc-driver.patch
Add M48T35 RTC driver
farsync-warning-fix.patch
farsync.c warning fix
sparc64-bug-needs-compiler-h.patch
sparc64: bug.h needs compiler.h
jfs-warning-fix.patch
jfs warning fix
velocity-warning-fixes.patch
velocity warning fixes
velocity-warning-fixes-2.patch
via-velocity: more warning fixes
velocity-warning-fixes-3.patch
via-velocity.c: even more warning fixes
velocity-warning-fixes-4.patch
via-velocity warning fix 4
abs-fix.patch
abs() fixes
lindent-rwsem.patch
lindent rwsem
tdfxb-warning-fix.patch
Fix warning in tdfxfb.c
ide-taskfilec-fixups-cleanups.patch
ide: remove redundant hwgroup->handler checks from ide-taskfile.c
ide-end-request-fix-for-config_ide_taskfile_io=y-pio-handlers.patch
ide: end request fix for CONFIG_IDE_TASKFILE_IO=y PIO handlers
ide-pio-in-drive-busy-fix-config_ide_taskfile_io=y.patch
ide: PIO-in drive busy fix (CONFIG_IDE_TASKFILE_IO=y)
ide-check-drive-mult_count-in-flagged_taskfile.patch
ide: check drive->mult_count in flagged_taskfile()
ide-last-irq-fix-for-task_mulout_intr-config_ide_taskfile_io=n.patch
ide: last IRQ fix for task_mulout_intr() (CONFIG_IDE_TASKFILE_IO=n)
ide-remove-dtf-debugging-printks-from-ide-taskfilec.patch
ide: remove DTF() debugging printks from ide-taskfile.c
ide-add-task_multi_sectors-to-ide-taskfilec.patch
ide: add task_multi_sectors() to ide-taskfile.c
ide-split-task_sectors-and-task_multi_sectors.patch
ide: split task_sectors() and task_multi_sectors()
ide-dont-clear-rq-errors-for-req_drive_taskfile-requests.patch
ide: don't clear rq->errors for REQ_DRIVE_TASKFILE requests
ide-use-task_buffer_sectors-in-ide-taskfilec.patch
ide: use task_buffer[_multi]_sectors() in ide-taskfile.c
ide-pio-out-setup-fixes-config_ide_taskfile_io=n.patch
ide: PIO-out setup fixes (CONFIG_IDE_TASKFILE_IO=n)
idrh-path.patch
idr.h path
wanxl-firmware-build-fix.patch
wanxl firware build fix
avoid-rebuild-of-ikcfg-when-using-o=.patch
Avoid rebuild of IKCFG when using O=
kbuild-add-deb-pkg-target.patch
kbuild: add deb-pkg target
x86_64-double-clock-speed-fix.patch
Fix rthe x86_64 clock-runs-too-fast thing
sysfs-overflow-debug.patch
sysfs-overflow-debug
fix-smbfs-readdir-oops.patch
Fix smbfs readdir oops
remove-smbfs-server-rcls-err.patch
Remove smbfs server->rcls/err
kallsyms-exclude.patch
kallsyms: exclude kallsyms-generated symbols
kallsyms-verify.patch
kallsyms: verify that System.map is stable
^ permalink raw reply [flat|nested] 23+ messages in thread
* 2.6.7-mm1: empty help text for FB_RIVA_I2C
2004-06-21 0:46 2.6.7-mm1 Andrew Morton
@ 2004-06-21 1:40 ` Adrian Bunk
2004-06-21 7:38 ` Antonino A. Daplas
2004-06-21 1:43 ` [patch] 2.6.7-mm1: R8169_NAPI help text Adrian Bunk
` (7 subsequent siblings)
8 siblings, 1 reply; 23+ messages in thread
From: Adrian Bunk @ 2004-06-21 1:40 UTC (permalink / raw)
To: Andrew Morton, Antonino Daplas; +Cc: linux-kernel
On Sun, Jun 20, 2004 at 05:46:32PM -0700, Andrew Morton wrote:
>...
> All 226 patches:
>
>
> linus.patch
>...
FB_RIVA_I2C has an empty help text.
Please add a help text with some information.
TIA
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 23+ messages in thread
* [patch] 2.6.7-mm1: R8169_NAPI help text
2004-06-21 0:46 2.6.7-mm1 Andrew Morton
2004-06-21 1:40 ` 2.6.7-mm1: empty help text for FB_RIVA_I2C Adrian Bunk
@ 2004-06-21 1:43 ` Adrian Bunk
2004-06-21 1:55 ` [patch] 2.6.7-mm1: drivers/scsi/hosts.h -> scsi/scsi_host.h Adrian Bunk
` (6 subsequent siblings)
8 siblings, 0 replies; 23+ messages in thread
From: Adrian Bunk @ 2004-06-21 1:43 UTC (permalink / raw)
To: Andrew Morton, jgarzik; +Cc: linux-kernel, linux-net
The patch below adds the missing help text for R8169_NAPI.
Please apply
Adrian
--- linux-2.6.7-rc2-mm2-full/drivers/net/Kconfig.old 2004-06-04 17:10:43.000000000 +0200
+++ linux-2.6.7-rc2-mm2-full/drivers/net/Kconfig 2004-06-04 17:18:14.000000000 +0200
@@ -1983,8 +2027,20 @@
config R8169_NAPI
bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
- depends on R8169 && EXPERIMENTAL
+ depends on R8169 && EXPERIMENTAL
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
config SK98LIN
tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
^ permalink raw reply [flat|nested] 23+ messages in thread
* [patch] 2.6.7-mm1: drivers/scsi/hosts.h -> scsi/scsi_host.h
2004-06-21 0:46 2.6.7-mm1 Andrew Morton
2004-06-21 1:40 ` 2.6.7-mm1: empty help text for FB_RIVA_I2C Adrian Bunk
2004-06-21 1:43 ` [patch] 2.6.7-mm1: R8169_NAPI help text Adrian Bunk
@ 2004-06-21 1:55 ` Adrian Bunk
2004-06-22 3:48 ` Jeff Garzik
2004-06-21 2:04 ` 2.6.7-mm1 Adrian Bunk
` (5 subsequent siblings)
8 siblings, 1 reply; 23+ messages in thread
From: Adrian Bunk @ 2004-06-21 1:55 UTC (permalink / raw)
To: Andrew Morton, jgarzik; +Cc: linux-kernel
On Sun, Jun 20, 2004 at 05:46:32PM -0700, Andrew Morton wrote:
>...
> All 226 patches:
>...
> bk-libata.patch
>...
drivers/scsi/hosts.h is obsolete, use scsi/scsi_host.h.
Please apply
Adrian
--- linux-2.6.7-mm1-full/drivers/scsi/sata_nv.c.old 2004-06-21 03:50:36.000000000 +0200
+++ linux-2.6.7-mm1-full/drivers/scsi/sata_nv.c 2004-06-21 03:51:17.000000000 +0200
@@ -31,7 +31,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "scsi.h"
-#include "hosts.h"
+#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1
2004-06-21 0:46 2.6.7-mm1 Andrew Morton
` (2 preceding siblings ...)
2004-06-21 1:55 ` [patch] 2.6.7-mm1: drivers/scsi/hosts.h -> scsi/scsi_host.h Adrian Bunk
@ 2004-06-21 2:04 ` Adrian Bunk
2004-06-22 5:33 ` 2.6.7-mm1 Sam Ravnborg
2004-06-21 2:06 ` 2.6.7-mm1 linker trouble with CONFIG_FB_RIVA_I2C=y and modular I2C Matthias Andree
` (4 subsequent siblings)
8 siblings, 1 reply; 23+ messages in thread
From: Adrian Bunk @ 2004-06-21 2:04 UTC (permalink / raw)
To: Andrew Morton, Sam Ravnborg; +Cc: linux-kernel
On Sun, Jun 20, 2004 at 05:46:32PM -0700, Andrew Morton wrote:
>...
> +wanxl-firmware-build-fix.patch
>
> Fix allmodconfig build
>...
This option is in drivers/base/Kconfig, but the similar option
STANDALONE [1] is in init/Kconfig.
Shouldn't buoth be at the same place?
What about moving STANDALONE ad let it depend on PREVENT_FIRMWARE_BUILD?
cu
Adrian
[1] both options do different things, and both seem to be needed,
but I think they should be at the same place
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1 linker trouble with CONFIG_FB_RIVA_I2C=y and modular I2C
2004-06-21 0:46 2.6.7-mm1 Andrew Morton
` (3 preceding siblings ...)
2004-06-21 2:04 ` 2.6.7-mm1 Adrian Bunk
@ 2004-06-21 2:06 ` Matthias Andree
2004-06-21 15:29 ` [patch] " Adrian Bunk
2004-06-21 10:48 ` 2.6.7-mm1 Dominik Karall
` (3 subsequent siblings)
8 siblings, 1 reply; 23+ messages in thread
From: Matthias Andree @ 2004-06-21 2:06 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1032 bytes --]
On Sun, 20 Jun 2004, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm1/
This version causes linker trouble with
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_FB_RIVA_I2C=y
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o(.text+0xda101): In function `riva_setup_i2c_bus':
: undefined reference to `i2c_bit_add_bus'
drivers/built-in.o(.text+0xda218): In function `riva_delete_i2c_busses':
: undefined reference to `i2c_bit_del_bus'
drivers/built-in.o(.text+0xda237): In function `riva_delete_i2c_busses':
: undefined reference to `i2c_bit_del_bus'
drivers/built-in.o(.text+0xda2c9): In function `riva_do_probe_i2c_edid':
: undefined reference to `i2c_transfer'
make: *** [.tmp_vmlinux1] Error 1
Setting CONFIG_FB_RIVA_I2C to "n" fixes the build problem.
Setting CONFIG_I2C and CONFIG_I2C_ALGOBIT to "y" (I used to use "m")
also fixes the build problem.
Full failing .config is attached (comments stripped, gzipped).
--
Matthias Andree
[-- Attachment #2: failconfig.gz --]
[-- Type: application/x-gunzip, Size: 3082 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1: empty help text for FB_RIVA_I2C
2004-06-21 1:40 ` 2.6.7-mm1: empty help text for FB_RIVA_I2C Adrian Bunk
@ 2004-06-21 7:38 ` Antonino A. Daplas
0 siblings, 0 replies; 23+ messages in thread
From: Antonino A. Daplas @ 2004-06-21 7:38 UTC (permalink / raw)
To: Adrian Bunk, Andrew Morton; +Cc: linux-kernel
On Monday 21 June 2004 09:40, Adrian Bunk wrote:
> On Sun, Jun 20, 2004 at 05:46:32PM -0700, Andrew Morton wrote:
> >...
> > All 226 patches:
> >
> >
> > linus.patch
> >...
>
> FB_RIVA_I2C has an empty help text.
>
> Please add a help text with some information.
>
Ok.
Tony
Signed-off-by: Antonino Daplas <adaplas@pol.net>
diff -Naur linux-2.6.7-rc3-mm2-orig/drivers/video/Kconfig linux-2.6.7-rc3-mm2/drivers/video/Kconfig
--- linux-2.6.7-rc3-mm2-orig/drivers/video/Kconfig 2004-06-21 07:22:00.113603640 +0000
+++ linux-2.6.7-rc3-mm2/drivers/video/Kconfig 2004-06-21 07:34:13.975039744 +0000
@@ -436,7 +436,14 @@
bool "Enable DDC support"
depends on FB_RIVA && I2C
help
-
+ This enables I2C support for nVidia Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
depends on FB && AGP && AGP_INTEL && EXPERIMENTAL && PCI
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1
2004-06-21 0:46 2.6.7-mm1 Andrew Morton
` (4 preceding siblings ...)
2004-06-21 2:06 ` 2.6.7-mm1 linker trouble with CONFIG_FB_RIVA_I2C=y and modular I2C Matthias Andree
@ 2004-06-21 10:48 ` Dominik Karall
2004-06-21 11:00 ` 2.6.7-mm1 Andrew Morton
2004-06-21 11:48 ` 2.6.7-mm1 Eric BEGOT
` (2 subsequent siblings)
8 siblings, 1 reply; 23+ messages in thread
From: Dominik Karall @ 2004-06-21 10:48 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 852 bytes --]
On Monday 21 June 2004 02:46, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-m
>m1/
My network does not work with this patch. I have a SiS900 onboard chip. It
works with 2.6.7 and 2.6.7-bk3 too. All other -mm patches with 2.6.7-rcX
kernel worked too.
I attached syslog and .config file. Here are the lines which are suspected:
...
Jun 21 12:07:51 debian kernel: NET: Registered protocol family 4
Jun 21 12:07:51 debian pptp[1933]: anon log[main:pptp.c:219]: The synchronous
pptp option is NOT activated
Jun 21 12:07:54 debian kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jun 21 12:07:54 debian kernel: eth0: Transmit timeout, status 00000004
00000000
Jun 21 12:07:54 debian kernel: eth0: Media Link On 100mbps full-duplex
.....
The same .config file works with 2.6.7-bk3!
greets dominik
[-- Attachment #2: syslog.txt --]
[-- Type: text/plain, Size: 33672 bytes --]
Jun 21 12:07:26 debian kernel: Linux version 2.6.7-mm1 (root@debian) (gcc-Version 3.4.0 20040403 (prerelease) (Debian)) #1 Mon Jun 21 09:57:37 CEST 2004
Jun 21 12:07:26 debian kernel: BIOS-provided physical RAM map:
Jun 21 12:07:26 debian kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jun 21 12:07:26 debian kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jun 21 12:07:26 debian kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jun 21 12:07:26 debian kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Jun 21 12:07:26 debian kernel: BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Jun 21 12:07:26 debian kernel: BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
Jun 21 12:07:26 debian kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Jun 21 12:07:26 debian kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jun 21 12:07:26 debian kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Jun 21 12:07:26 debian kernel: 0MB HIGHMEM available.
Jun 21 12:07:26 debian kernel: 255MB LOWMEM available.
Jun 21 12:07:26 debian kernel: found SMP MP-table at 000f58e0
Jun 21 12:07:26 debian kernel: On node 0 totalpages: 65520
Jun 21 12:07:26 debian kernel: DMA zone: 4096 pages, LIFO batch:1
Jun 21 12:07:26 debian kernel: Normal zone: 61424 pages, LIFO batch:14
Jun 21 12:07:26 debian kernel: HighMem zone: 0 pages, LIFO batch:1
Jun 21 12:07:26 debian kernel: DMI 2.3 present.
Jun 21 12:07:26 debian kernel: ACPI: RSDP (v000 AWARD ) @ 0x000f72b0
Jun 21 12:07:26 debian kernel: ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
Jun 21 12:07:26 debian kernel: ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
Jun 21 12:07:26 debian kernel: ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff69c0
Jun 21 12:07:26 debian kernel: ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
Jun 21 12:07:26 debian kernel: ACPI: PM-Timer IO Port: 0x1008
Jun 21 12:07:26 debian kernel: ACPI: Local APIC address 0xfee00000
Jun 21 12:07:26 debian kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jun 21 12:07:26 debian kernel: Processor #0 15:2 APIC version 20
Jun 21 12:07:26 debian kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jun 21 12:07:26 debian kernel: IOAPIC[0]: Assigned apic_id 2
Jun 21 12:07:26 debian kernel: IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
Jun 21 12:07:26 debian kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 21 12:07:26 debian kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Jun 21 12:07:26 debian kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Jun 21 12:07:26 debian kernel: Using ACPI (MADT) for SMP configuration information
Jun 21 12:07:26 debian kernel: Built 1 zonelists
Jun 21 12:07:26 debian kernel: Initializing CPU#0
Jun 21 12:07:26 debian kernel: Kernel command line: BOOT_IMAGE=2.6.7-mm1 ro root=30a hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
Jun 21 12:07:26 debian kernel: ide_setup: hda=scsi
Jun 21 12:07:26 debian kernel: ide_setup: hdb=scsi
Jun 21 12:07:26 debian kernel: ide_setup: hdc=scsi
Jun 21 12:07:26 debian kernel: ide_setup: hdd=scsi
Jun 21 12:07:26 debian kernel: ide_setup: hde=scsi
Jun 21 12:07:26 debian kernel: ide_setup: hdf=scsi
Jun 21 12:07:26 debian kernel: ide_setup: hdg=scsi
Jun 21 12:07:26 debian kernel: ide_setup: hdh=scsi
Jun 21 12:07:26 debian kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
Jun 21 12:07:26 debian kernel: Detected 2672.867 MHz processor.
Jun 21 12:07:26 debian kernel: Using pmtmr for high-res timesource
Jun 21 12:07:26 debian kernel: Console: colour dummy device 80x25
Jun 21 12:07:26 debian kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 21 12:07:26 debian kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 21 12:07:26 debian kernel: Memory: 255880k/262080k available (1841k kernel code, 5452k reserved, 778k data, 132k init, 0k highmem)
Jun 21 12:07:26 debian kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 21 12:07:26 debian kernel: Calibrating delay loop... 5308.41 BogoMIPS
Jun 21 12:07:26 debian kernel: Security Scaffold v1.0.0 initialized
Jun 21 12:07:26 debian kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jun 21 12:07:26 debian kernel: CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
Jun 21 12:07:26 debian kernel: CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
Jun 21 12:07:26 debian kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Jun 21 12:07:26 debian kernel: CPU: L2 cache: 512K
Jun 21 12:07:26 debian kernel: CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Jun 21 12:07:26 debian kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Jun 21 12:07:26 debian kernel: Enabling fast FPU save and restore... done.
Jun 21 12:07:26 debian kernel: Enabling unmasked SIMD FPU exception support... done.
Jun 21 12:07:26 debian kernel: Checking 'hlt' instruction... OK.
Jun 21 12:07:26 debian kernel: enabled ExtINT on CPU#0
Jun 21 12:07:26 debian kernel: ESR value before enabling vector: 00000000
Jun 21 12:07:26 debian kernel: ESR value after enabling vector: 00000000
Jun 21 12:07:26 debian kernel: ENABLING IO-APIC IRQs
Jun 21 12:07:26 debian kernel: init IO_APIC IRQs
Jun 21 12:07:26 debian kernel: IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
Jun 21 12:07:26 debian kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Jun 21 12:07:26 debian kernel: Using local APIC timer interrupts.
Jun 21 12:07:26 debian kernel: calibrating APIC timer ...
Jun 21 12:07:26 debian kernel: ..... CPU clock speed is 2672.0300 MHz.
Jun 21 12:07:26 debian kernel: ..... host bus clock speed is 133.0614 MHz.
Jun 21 12:07:26 debian kernel: NET: Registered protocol family 16
Jun 21 12:07:26 debian kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
Jun 21 12:07:26 debian kernel: PCI: Using configuration type 1
Jun 21 12:07:26 debian kernel: mtrr: v2.0 (20020519)
Jun 21 12:07:26 debian kernel: ACPI: Subsystem revision 20040326
Jun 21 12:07:26 debian kernel: ACPI: Interpreter enabled
Jun 21 12:07:26 debian kernel: ACPI: Using IOAPIC for interrupt routing
Jun 21 12:07:26 debian kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Jun 21 12:07:26 debian kernel: PCI: Probing PCI hardware (bus 00)
Jun 21 12:07:26 debian kernel: Uncovering SIS963 that hid as a SIS503 (compatible=1)
Jun 21 12:07:26 debian kernel: Enabling SiS 96x SMBus.
Jun 21 12:07:26 debian kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 21 12:07:26 debian kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jun 21 12:07:26 debian kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Jun 21 12:07:26 debian kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Jun 21 12:07:26 debian kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Jun 21 12:07:26 debian kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Jun 21 12:07:26 debian kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Jun 21 12:07:26 debian kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *13
Jun 21 12:07:26 debian kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jun 21 12:07:26 debian kernel: PCI: Using ACPI for IRQ routing
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 17 (level, low) -> IRQ 17
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 17
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 21 12:07:26 debian kernel: number of MP IRQ sources: 18.
Jun 21 12:07:26 debian kernel: number of IO-APIC #2 registers: 24.
Jun 21 12:07:26 debian kernel: testing the IO APIC.......................
Jun 21 12:07:26 debian kernel: IO APIC #2......
Jun 21 12:07:26 debian kernel: .... register #00: 02000000
Jun 21 12:07:26 debian kernel: ....... : physical APIC id: 02
Jun 21 12:07:26 debian kernel: ....... : Delivery Type: 0
Jun 21 12:07:26 debian kernel: ....... : LTS : 0
Jun 21 12:07:26 debian kernel: .... register #01: 00178014
Jun 21 12:07:26 debian kernel: ....... : max redirection entries: 0017
Jun 21 12:07:26 debian kernel: ....... : PRQ implemented: 1
Jun 21 12:07:26 debian kernel: ....... : IO APIC version: 0014
Jun 21 12:07:26 debian kernel: .... register #02: 02000000
Jun 21 12:07:26 debian kernel: ....... : arbitration: 02
Jun 21 12:07:26 debian kernel: .... IRQ redirection table:
Jun 21 12:07:26 debian kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Jun 21 12:07:26 debian kernel: 00 001 01 0 0 0 0 0 1 1 31
Jun 21 12:07:26 debian kernel: 01 001 01 0 0 0 0 0 1 1 39
Jun 21 12:07:26 debian kernel: 02 001 01 0 0 0 0 0 1 1 31
Jun 21 12:07:26 debian kernel: 03 001 01 0 0 0 0 0 1 1 41
Jun 21 12:07:26 debian kernel: 04 001 01 0 0 0 0 0 1 1 49
Jun 21 12:07:26 debian kernel: 05 001 01 0 0 0 0 0 1 1 51
Jun 21 12:07:26 debian kernel: 06 001 01 0 0 0 0 0 1 1 59
Jun 21 12:07:26 debian kernel: 07 001 01 0 0 0 0 0 1 1 61
Jun 21 12:07:26 debian kernel: 08 001 01 0 0 0 0 0 1 1 69
Jun 21 12:07:26 debian kernel: 09 001 01 0 1 0 1 0 1 1 71
Jun 21 12:07:26 debian kernel: 0a 001 01 0 0 0 0 0 1 1 79
Jun 21 12:07:26 debian kernel: 0b 001 01 0 0 0 0 0 1 1 81
Jun 21 12:07:26 debian kernel: 0c 001 01 0 0 0 0 0 1 1 89
Jun 21 12:07:26 debian kernel: 0d 001 01 0 0 0 0 0 1 1 91
Jun 21 12:07:26 debian kernel: 0e 001 01 0 0 0 0 0 1 1 99
Jun 21 12:07:26 debian kernel: 0f 001 01 0 0 0 0 0 1 1 A1
Jun 21 12:07:26 debian kernel: 10 001 01 1 1 0 1 0 1 1 B1
Jun 21 12:07:26 debian kernel: 11 001 01 1 1 0 1 0 1 1 A9
Jun 21 12:07:26 debian kernel: 12 001 01 1 1 0 1 0 1 1 B9
Jun 21 12:07:26 debian kernel: 13 001 01 1 1 0 1 0 1 1 E1
Jun 21 12:07:26 debian kernel: 14 001 01 1 1 0 1 0 1 1 C1
Jun 21 12:07:26 debian kernel: 15 001 01 1 1 0 1 0 1 1 C9
Jun 21 12:07:26 debian kernel: 16 001 01 1 1 0 1 0 1 1 D1
Jun 21 12:07:26 debian kernel: 17 001 01 1 1 0 1 0 1 1 D9
Jun 21 12:07:26 debian kernel: IRQ to pin mappings:
Jun 21 12:07:26 debian kernel: IRQ0 -> 0:0-> 0:2
Jun 21 12:07:26 debian kernel: IRQ1 -> 0:1
Jun 21 12:07:26 debian kernel: IRQ3 -> 0:3
Jun 21 12:07:26 debian kernel: IRQ4 -> 0:4
Jun 21 12:07:26 debian kernel: IRQ5 -> 0:5
Jun 21 12:07:26 debian kernel: IRQ6 -> 0:6
Jun 21 12:07:26 debian kernel: IRQ7 -> 0:7
Jun 21 12:07:26 debian kernel: IRQ8 -> 0:8
Jun 21 12:07:26 debian kernel: IRQ9 -> 0:9
Jun 21 12:07:26 debian kernel: IRQ10 -> 0:10
Jun 21 12:07:26 debian kernel: IRQ11 -> 0:11
Jun 21 12:07:26 debian kernel: IRQ12 -> 0:12
Jun 21 12:07:26 debian kernel: IRQ13 -> 0:13
Jun 21 12:07:26 debian kernel: IRQ14 -> 0:14
Jun 21 12:07:26 debian kernel: IRQ15 -> 0:15
Jun 21 12:07:26 debian kernel: IRQ16 -> 0:16
Jun 21 12:07:26 debian kernel: IRQ17 -> 0:17
Jun 21 12:07:26 debian kernel: IRQ18 -> 0:18
Jun 21 12:07:26 debian kernel: IRQ19 -> 0:19
Jun 21 12:07:26 debian kernel: IRQ20 -> 0:20
Jun 21 12:07:26 debian kernel: IRQ21 -> 0:21
Jun 21 12:07:26 debian kernel: IRQ22 -> 0:22
Jun 21 12:07:26 debian kernel: IRQ23 -> 0:23
Jun 21 12:07:26 debian kernel: .................................... done.
Jun 21 12:07:26 debian kernel: vesafb: framebuffer at 0xd8000000, mapped to 0xd0807000, size 10240k
Jun 21 12:07:26 debian kernel: vesafb: mode is 1280x1024x32, linelength=5120, pages=0
Jun 21 12:07:26 debian kernel: vesafb: protected mode interface info at c000:e2d0
Jun 21 12:07:26 debian kernel: vesafb: scrolling: redraw
Jun 21 12:07:26 debian kernel: vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
Jun 21 12:07:26 debian kernel: fb0: VESA VGA frame buffer device
Jun 21 12:07:26 debian kernel: udf: registering filesystem
Jun 21 12:07:26 debian kernel: Initializing Cryptographic API
Jun 21 12:07:26 debian kernel: Console: switching to colour frame buffer device 160x64
Jun 21 12:07:26 debian kernel: Linux agpgart interface v0.100 (c) Dave Jones
Jun 21 12:07:26 debian kernel: agpgart: Detected SiS 648 chipset
Jun 21 12:07:26 debian kernel: agpgart: Maximum main memory to use for agp memory: 203M
Jun 21 12:07:26 debian kernel: agpgart: AGP aperture is 128M @ 0xd0000000
Jun 21 12:07:26 debian kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
Jun 21 12:07:26 debian kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 21 12:07:26 debian kernel: PPP generic driver version 2.4.2
Jun 21 12:07:26 debian kernel: PPP Deflate Compression module registered
Jun 21 12:07:26 debian kernel: PPP BSD Compression module registered
Jun 21 12:07:26 debian kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jun 21 12:07:26 debian kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun 21 12:07:26 debian kernel: SIS5513: IDE controller at PCI slot 0000:00:02.5
Jun 21 12:07:26 debian kernel: ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16
Jun 21 12:07:26 debian kernel: SIS5513: chipset revision 0
Jun 21 12:07:26 debian kernel: SIS5513: not 100%% native mode: will probe irqs later
Jun 21 12:07:26 debian kernel: SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
Jun 21 12:07:26 debian kernel: ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
Jun 21 12:07:26 debian kernel: ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
Jun 21 12:07:26 debian kernel: hda: ST3120023A, ATA DISK drive
Jun 21 12:07:26 debian kernel: hdb: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
Jun 21 12:07:26 debian kernel: Using anticipatory io scheduler
Jun 21 12:07:26 debian kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 21 12:07:26 debian kernel: hdc: SONY CD-RW CRX210E1, ATAPI CD/DVD-ROM drive
Jun 21 12:07:26 debian kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jun 21 12:07:26 debian kernel: hda: max request size: 128KiB
Jun 21 12:07:26 debian kernel: hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
Jun 21 12:07:26 debian kernel: hda: cache flushes supported
Jun 21 12:07:26 debian kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
Jun 21 12:07:26 debian kernel: ide-cd: passing drive hdb to ide-scsi emulation.
Jun 21 12:07:26 debian kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Jun 21 12:07:26 debian kernel: ide-floppy driver 0.99.newide
Jun 21 12:07:26 debian kernel: ide-cd: passing drive hdb to ide-scsi emulation.
Jun 21 12:07:26 debian kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Jun 21 12:07:26 debian kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 21 12:07:26 debian kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 21 12:07:26 debian kernel: mice: PS/2 mouse device common for all mice
Jun 21 12:07:26 debian kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Jun 21 12:07:26 debian kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Jun 21 12:07:26 debian kernel: input: PC Speaker
Jun 21 12:07:26 debian kernel: NET: Registered protocol family 2
Jun 21 12:07:26 debian kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Jun 21 12:07:26 debian kernel: TCP: Hash tables configured (established 16384 bind 32768)
Jun 21 12:07:26 debian kernel: IPv4 over IPv4 tunneling driver
Jun 21 12:07:26 debian kernel: GRE over IPv4 tunneling driver
Jun 21 12:07:26 debian kernel: Initializing IPsec netlink socket
Jun 21 12:07:26 debian kernel: NET: Registered protocol family 1
Jun 21 12:07:26 debian kernel: NET: Registered protocol family 17
Jun 21 12:07:26 debian kernel: ACPI: (supports S0 S3 S4 S5)
Jun 21 12:07:26 debian kernel: kjournald starting. Commit interval 5 seconds
Jun 21 12:07:26 debian kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 21 12:07:26 debian kernel: VFS: Mounted root (ext3 filesystem) readonly.
Jun 21 12:07:26 debian kernel: Freeing unused kernel memory: 132k freed
Jun 21 12:07:26 debian kernel: SCSI subsystem initialized
Jun 21 12:07:26 debian kernel: ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
Jun 21 12:07:26 debian kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Jun 21 12:07:26 debian kernel: Vendor: IDE Model: DVD-ROM 16X Rev: 2.05
Jun 21 12:07:26 debian kernel: Type: CD-ROM ANSI SCSI revision: 02
Jun 21 12:07:26 debian kernel: scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Jun 21 12:07:26 debian kernel: Vendor: SONY Model: CD-RW CRX210E1 Rev: 2YS2
Jun 21 12:07:26 debian kernel: Type: CD-ROM ANSI SCSI revision: 02
Jun 21 12:07:26 debian kernel: hdb: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
Jun 21 12:07:26 debian kernel: ide: failed opcode was 100
Jun 21 12:07:26 debian kernel: hda: dma_timer_expiry: dma status == 0x60
Jun 21 12:07:26 debian kernel: hda: DMA timeout retry
Jun 21 12:07:26 debian kernel: hda: timeout waiting for DMA
Jun 21 12:07:26 debian kernel: Adding 514040k swap on /dev/hda9. Priority:-1 extents:1
Jun 21 12:07:26 debian kernel: EXT3 FS on hda10, internal journal
Jun 21 12:07:26 debian kernel: warning: process `update' used the obsolete bdflush system call
Jun 21 12:07:26 debian kernel: Fix your initscripts?
Jun 21 12:07:27 debian kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
Jun 21 12:07:27 debian kernel: ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 17
Jun 21 12:07:27 debian kernel: ohci1394: fw-host0: Unexpected PCI resource length of 1000!
Jun 21 12:07:27 debian kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e2427000-e24277ff] Max Packet=[2048]
Jun 21 12:07:27 debian pci.agent[816]: ohci1394: loaded sucessfully
Jun 21 12:07:27 debian kernel: ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
Jun 21 12:07:28 debian kernel: intel8x0_measure_ac97_clock: measured 99886 usecs
Jun 21 12:07:28 debian kernel: intel8x0: measured clock 24027 rejected
Jun 21 12:07:28 debian kernel: intel8x0: clocking to 48000
Jun 21 12:07:28 debian pci.agent[886]: snd-intel8x0: loaded sucessfully
Jun 21 12:07:28 debian kernel: usbcore: registered new driver usbfs
Jun 21 12:07:28 debian kernel: usbcore: registered new driver hub
Jun 21 12:07:28 debian kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Jun 21 12:07:28 debian kernel: ohci_hcd: block sizes: ed 64 td 64
Jun 21 12:07:28 debian kernel: ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
Jun 21 12:07:28 debian kernel: ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
Jun 21 12:07:28 debian kernel: ohci_hcd 0000:00:03.0: irq 20, pci mem d12ba000
Jun 21 12:07:28 debian kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
Jun 21 12:07:28 debian kernel: hub 1-0:1.0: USB hub found
Jun 21 12:07:28 debian kernel: hub 1-0:1.0: 2 ports detected
Jun 21 12:07:28 debian kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000000000000000]
Jun 21 12:07:28 debian kernel: ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
Jun 21 12:07:28 debian kernel: ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
Jun 21 12:07:28 debian usb.agent[1002]: usbcore: already loaded
Jun 21 12:07:28 debian kernel: ohci_hcd 0000:00:03.1: irq 21, pci mem d1353000
Jun 21 12:07:29 debian kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
Jun 21 12:07:29 debian kernel: hub 2-0:1.0: USB hub found
Jun 21 12:07:29 debian kernel: hub 2-0:1.0: 2 ports detected
Jun 21 12:07:29 debian usb.agent[1050]: usbcore: already loaded
Jun 21 12:07:29 debian kernel: ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
Jun 21 12:07:29 debian kernel: ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
Jun 21 12:07:29 debian kernel: ohci_hcd 0000:00:03.2: irq 22, pci mem d1355000
Jun 21 12:07:29 debian kernel: ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
Jun 21 12:07:29 debian kernel: usb 2-1: new full speed USB device using address 2
Jun 21 12:07:29 debian kernel: hub 3-0:1.0: USB hub found
Jun 21 12:07:29 debian kernel: hub 3-0:1.0: 2 ports detected
Jun 21 12:07:29 debian usb.agent[1090]: usbcore: already loaded
Jun 21 12:07:30 debian pci.agent[961]: ohci-hcd: loaded sucessfully
Jun 21 12:07:30 debian kernel: Initializing USB Mass Storage driver...
Jun 21 12:07:30 debian kernel: usb 3-1: new full speed USB device using address 2
Jun 21 12:07:30 debian kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Jun 21 12:07:30 debian pci.agent[1153]: ohci-hcd: already loaded
Jun 21 12:07:30 debian scsi.agent[1215]: disk at /devices/pci0000:00/0000:00:03.1/usb2/2-1/2-1:1.0/host2/2:0:0:0
Jun 21 12:07:30 debian kernel: Vendor: Medion Model: Flash XL CF Rev: 2.6D
Jun 21 12:07:30 debian kernel: Type: Direct-Access ANSI SCSI revision: 02
Jun 21 12:07:30 debian usb.agent[1125]: usb-storage: loaded sucessfully
Jun 21 12:07:30 debian kernel: USB Mass Storage device found at 2
Jun 21 12:07:30 debian kernel: usbcore: registered new driver usb-storage
Jun 21 12:07:30 debian kernel: USB Mass Storage support registered.
Jun 21 12:07:30 debian pci.agent[1202]: ohci-hcd: already loaded
Jun 21 12:07:31 debian usb.agent[1237]: usblp: loaded sucessfully
Jun 21 12:07:31 debian kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
Jun 21 12:07:31 debian kernel: usbcore: registered new driver usblp
Jun 21 12:07:31 debian kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jun 21 12:07:31 debian kernel: ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
Jun 21 12:07:31 debian kernel: ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
Jun 21 12:07:31 debian kernel: ehci_hcd 0000:00:03.3: irq 23, pci mem d1357000
Jun 21 12:07:31 debian kernel: ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
Jun 21 12:07:31 debian kernel: PCI: cache line size of 128 is not supported by device 0000:00:03.3
Jun 21 12:07:31 debian kernel: ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Jun 21 12:07:31 debian kernel: usb 2-1: USB disconnect, address 2
Jun 21 12:07:31 debian kernel: hub 4-0:1.0: USB hub found
Jun 21 12:07:31 debian kernel: hub 4-0:1.0: 6 ports detected
Jun 21 12:07:31 debian pci.agent[1302]: ehci-hcd: loaded sucessfully
Jun 21 12:07:31 debian usb.agent[1370]: usbcore: already loaded
Jun 21 12:07:31 debian kernel: usb 3-1: USB disconnect, address 2
Jun 21 12:07:31 debian kernel: drivers/usb/class/usblp.c: usblp0: removed
Jun 21 12:07:32 debian kernel: sis900.c: v1.08.07 11/02/2003
Jun 21 12:07:32 debian kernel: ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 0.
Jun 21 12:07:32 debian kernel: eth0: Realtek RTL8201 PHY transceiver found at address 1.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 2.
Jun 21 12:07:32 debian net.agent[1463]: Setting up IP spoofing protection: rp_filter.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 3.
Jun 21 12:07:32 debian kernel: ohci_hcd 0000:00:03.1: remote wakeup
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 4.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 5.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 6.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 7.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 8.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 9.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 10.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 11.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 12.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 13.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 14.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 15.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 16.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 17.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 18.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 19.
Jun 21 12:07:32 debian kernel: ohci_hcd 0000:00:03.2: remote wakeup
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 20.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 21.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 22.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 23.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 24.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 25.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 26.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 27.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 28.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 29.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 30.
Jun 21 12:07:32 debian kernel: eth0: Unknown PHY transceiver found at address 31.
Jun 21 12:07:32 debian kernel: usb 2-1: new full speed USB device using address 3
Jun 21 12:07:32 debian kernel: eth0: Using transceiver found at address 1 as default
Jun 21 12:07:32 debian kernel: eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:10:dc:af:b9:cc.
Jun 21 12:07:32 debian pci.agent[1414]: sis900: loaded sucessfully
Jun 21 12:07:33 debian kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Jun 21 12:07:33 debian kernel: Vendor: Medion Model: Flash XL CF Rev: 2.6D
Jun 21 12:07:33 debian usb.agent[1494]: usb-storage: already loaded
Jun 21 12:07:33 debian kernel: Type: Direct-Access ANSI SCSI revision: 02
Jun 21 12:07:33 debian kernel: USB Mass Storage device found at 3
Jun 21 12:07:33 debian kernel: 8139too Fast Ethernet driver 0.9.27
Jun 21 12:07:33 debian kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
Jun 21 12:07:33 debian net.agent[1571]: Setting up IP spoofing protection: rp_filter.
Jun 21 12:07:33 debian kernel: eth1: RealTek RTL8139 at 0xd1359000, 00:50:fc:2d:9a:5c, IRQ 18
Jun 21 12:07:33 debian kernel: eth1: Identified 8139 chip type 'RTL-8139C'
Jun 21 12:07:33 debian pci.agent[1523]: 8139too: loaded sucessfully
Jun 21 12:07:33 debian kernel: usb 3-1: new full speed USB device using address 3
Jun 21 12:07:33 debian usb.agent[1632]: usblp: already loaded
Jun 21 12:07:33 debian kernel: Linux video capture interface: v1.00
Jun 21 12:07:34 debian kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
Jun 21 12:07:34 debian kernel: saa7130/34: v4l2 driver version 0.2.12 loaded
Jun 21 12:07:34 debian kernel: ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
Jun 21 12:07:34 debian kernel: saa7134[0]: found at 0000:00:08.0, rev: 1, irq: 19, latency: 32, mmio: 0xe2426000
Jun 21 12:07:34 debian kernel: saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
Jun 21 12:07:34 debian kernel: saa7134[0]: board init: gpio is 0
Jun 21 12:07:34 debian kernel: saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9
Jun 21 12:07:34 debian kernel: saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00
Jun 21 12:07:34 debian kernel: saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff
Jun 21 12:07:34 debian kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jun 21 12:07:34 debian kernel: tuner: chip found at addr 0xc0 i2c-bus saa7134[0]
Jun 21 12:07:34 debian kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by saa7134[0]
Jun 21 12:07:34 debian kernel: tda9885/6/7: chip found @ 0x86
Jun 21 12:07:34 debian kernel: saa7134[0]: registered device video0 [v4l2]
Jun 21 12:07:34 debian scsi.agent[1555]: disk at /devices/pci0000:00/0000:00:03.1/usb2/2-1/2-1:1.0/host3/3:0:0:0
Jun 21 12:07:34 debian kernel: saa7134[0]: registered device vbi0
Jun 21 12:07:34 debian kernel: saa7134[0]: registered device radio0
Jun 21 12:07:34 debian pci.agent[1601]: saa7134: loaded sucessfully
Jun 21 12:07:34 debian pci.rc[720]: ignore pci display device on 01:00.0
Jun 21 12:07:37 debian pumpd[458]: PUMP: sending discover
Jun 21 12:07:42 debian kernel: eth0: Media Link On 100mbps full-duplex
Jun 21 12:07:50 debian pumpd[458]: got dhcp offer
Jun 21 12:07:50 debian pumpd[458]: PUMP: sending second discover
Jun 21 12:07:50 debian pumpd[458]: PUMP: got an offer
Jun 21 12:07:50 debian pumpd[458]: PUMP: got lease
Jun 21 12:07:50 debian pumpd[458]: intf: device: eth0
Jun 21 12:07:50 debian pumpd[458]: intf: set: 416
Jun 21 12:07:50 debian pumpd[458]: intf: bootServer: 193.170.62.146
Jun 21 12:07:50 debian pumpd[458]: intf: reqLease: 43200
Jun 21 12:07:50 debian pumpd[458]: intf: ip: 172.16.1.62
Jun 21 12:07:50 debian pumpd[458]: intf: next server: 193.170.62.146
Jun 21 12:07:50 debian pumpd[458]: intf: netmask: 255.255.0.0
Jun 21 12:07:50 debian pumpd[458]: intf: dnsServers[0]: 172.16.0.1
Jun 21 12:07:50 debian pumpd[458]: intf: numDns: 1
Jun 21 12:07:50 debian pumpd[458]: intf: domain: vpn.gateway.net.de
Jun 21 12:07:50 debian pumpd[458]: intf: broadcast: 172.16.255.255
Jun 21 12:07:50 debian pumpd[458]: intf: network: 172.16.0.0
Jun 21 12:07:50 debian pumpd[458]: configured interface eth0
Jun 21 12:07:50 debian kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Jun 21 12:07:50 debian kernel: apm: overridden by ACPI.
Jun 21 12:07:50 debian modprobe: FATAL: Error inserting apm (/lib/modules/2.6.7-mm1/kernel/arch/i386/kernel/apm.ko): No such device
Jun 21 12:07:50 debian automount[1909]: starting automounter version 4.0.0, path = /mnt/auto, maptype = program, mapname = /etc/automount.sh
Jun 21 12:07:50 debian automount[1909]: Map argc = 1
Jun 21 12:07:50 debian automount[1909]: Map argv[0] = /etc/automount.sh
Jun 21 12:07:51 debian automount[1909]: mount(bind): bind_works = 1
Jun 21 12:07:51 debian automount[1909]: using kernel protocol version 4
Jun 21 12:07:51 debian automount[1909]: using timeout 2 seconds; freq 1 secs
Jun 21 12:07:51 debian kernel: NET: Registered protocol family 4
Jun 21 12:07:51 debian pptp[1933]: anon log[main:pptp.c:219]: The synchronous pptp option is NOT activated
Jun 21 12:07:54 debian kernel: NETDEV WATCHDOG: eth0: transmit timed out
Jun 21 12:07:54 debian kernel: eth0: Transmit timeout, status 00000004 00000000
Jun 21 12:07:54 debian kernel: eth0: Media Link On 100mbps full-duplex
Jun 21 12:07:54 debian pptp[1935]: anon warn[open_inetsock:pptp_callmgr.c:312]: connect: No route to host
Jun 21 12:07:54 debian pptp[1935]: anon fatal[callmgr_main:pptp_callmgr.c:121]: Could not open control connection to 172.16.0.1
Jun 21 12:07:54 debian pptp[1934]: anon fatal[open_callmgr:pptp.c:379]: Call manager exited with error 256
Jun 21 12:09:47 debian init: Switching to runlevel: 6
Jun 21 12:09:50 debian kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Jun 21 12:09:50 debian kernel: apm: overridden by ACPI.
[-- Attachment #3: 2.6.7-mm1.config --]
[-- Type: text/plain, Size: 31639 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_TABLE=m
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_SPEEDSTEP_LIB=m
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_USE_VECTOR is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDEDMA_FORCED=y
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not set
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
# CONFIG_IP_NF_MATCH_STATE is not set
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_ARPTABLES=m
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IP_NF_RAW is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
CONFIG_ISDN=m
#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
# CONFIG_ISDN_PPP is not set
# CONFIG_ISDN_AUDIO is not set
#
# ISDN feature submodules
#
# CONFIG_ISDN_DRV_LOOP is not set
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
#
# Active cards
#
# CONFIG_ISDN_DRV_TPAM is not set
# CONFIG_HYSDN is not set
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_C4 is not set
#
# Active Eicon DIVA Server cards
#
# CONFIG_CAPI_EICON is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=10
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_NOMMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_I810=y
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=m
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_IR=m
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_W9968CF is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="iso8859-15"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_POSIX=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1
2004-06-21 10:48 ` 2.6.7-mm1 Dominik Karall
@ 2004-06-21 11:00 ` Andrew Morton
2004-06-21 11:43 ` 2.6.7-mm1 Dominik Karall
0 siblings, 1 reply; 23+ messages in thread
From: Andrew Morton @ 2004-06-21 11:00 UTC (permalink / raw)
To: Dominik Karall; +Cc: linux-kernel
Dominik Karall <dominik.karall@gmx.net> wrote:
>
> On Monday 21 June 2004 02:46, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-m
> >m1/
>
> My network does not work with this patch.
Bummer. Does this reversion fix it?
diff -puN drivers/net/sis900.c~a drivers/net/sis900.c
--- 25/drivers/net/sis900.c~a 2004-06-21 04:00:05.242017088 -0700
+++ 25-akpm/drivers/net/sis900.c 2004-06-21 04:00:07.832623256 -0700
@@ -116,7 +116,6 @@ static struct mii_chip_info {
#define HOME 0x0001
#define LAN 0x0002
#define MIX 0x0003
-#define UNKNOWN 0x0
} mii_chip_table[] = {
{ "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN },
{ "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN },
@@ -578,11 +577,9 @@ static int __init sis900_mii_probe (stru
break;
}
- if( !mii_chip_table[i].phy_id1 ) {
+ if( !mii_chip_table[i].phy_id1 )
printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n",
- net_dev->name, phy_addr);
- mii_phy->phy_types = UNKNOWN;
- }
+ net_dev->name, phy_addr);
}
if (sis_priv->mii == NULL) {
@@ -647,15 +644,15 @@ static int __init sis900_mii_probe (stru
static u16 sis900_default_phy(struct net_device * net_dev)
{
struct sis900_private * sis_priv = net_dev->priv;
- struct mii_phy *phy = NULL, *phy_home = NULL, *default_phy = NULL, *phy_lan = NULL;
+ struct mii_phy *phy = NULL, *phy_home = NULL, *default_phy = NULL;
u16 status;
for( phy=sis_priv->first_mii; phy; phy=phy->next ){
status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
- /* Link ON & Not select default PHY & not ghost PHY */
- if ( (status & MII_STAT_LINK) && !default_phy && (phy->phy_types != UNKNOWN) )
+ /* Link ON & Not select deafalut PHY */
+ if ( (status & MII_STAT_LINK) && !(default_phy) )
default_phy = phy;
else{
status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL);
@@ -663,16 +660,12 @@ static u16 sis900_default_phy(struct net
status | MII_CNTL_AUTO | MII_CNTL_ISOLATE);
if( phy->phy_types == HOME )
phy_home = phy;
- else if (phy->phy_types == LAN)
- phy_lan = phy;
}
}
- if( !default_phy && phy_home )
+ if( (!default_phy) && phy_home )
default_phy = phy_home;
- else if( !default_phy && phy_lan )
- default_phy = phy_lan;
- else if ( !default_phy )
+ else if(!default_phy)
default_phy = sis_priv->first_mii;
if( sis_priv->mii != default_phy ){
_
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1
2004-06-21 11:00 ` 2.6.7-mm1 Andrew Morton
@ 2004-06-21 11:43 ` Dominik Karall
2004-06-23 7:28 ` 2.6.7-mm1 Daniele Venzano
0 siblings, 1 reply; 23+ messages in thread
From: Dominik Karall @ 2004-06-21 11:43 UTC (permalink / raw)
To: Andrew Morton, Daniele Venzano; +Cc: linux-kernel
On Monday 21 June 2004 13:00, Andrew Morton wrote:
> Dominik Karall <dominik.karall@gmx.net> wrote:
> > On Monday 21 June 2004 02:46, Andrew Morton wrote:
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.
> > >6.7-m m1/
> >
> > My network does not work with this patch.
>
> Bummer. Does this reversion fix it?
Yes. With this patch it works, but it works in that way, that the wrong
transceiver will be set as default. Maybe the current bk-netdev.patch is
incompatible with this patch? Or something isn't ok in bk-netdev.patch?
Because the SiS900 patch is long time in -mm tree now, and it worked before!
greets dominik
> diff -puN drivers/net/sis900.c~a drivers/net/sis900.c
> --- 25/drivers/net/sis900.c~a 2004-06-21 04:00:05.242017088 -0700
> +++ 25-akpm/drivers/net/sis900.c 2004-06-21 04:00:07.832623256 -0700
> @@ -116,7 +116,6 @@ static struct mii_chip_info {
> #define HOME 0x0001
> #define LAN 0x0002
> #define MIX 0x0003
> -#define UNKNOWN 0x0
> } mii_chip_table[] = {
> { "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN },
> { "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN },
> @@ -578,11 +577,9 @@ static int __init sis900_mii_probe (stru
> break;
> }
>
> - if( !mii_chip_table[i].phy_id1 ) {
> + if( !mii_chip_table[i].phy_id1 )
> printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n",
> - net_dev->name, phy_addr);
> - mii_phy->phy_types = UNKNOWN;
> - }
> + net_dev->name, phy_addr);
> }
>
> if (sis_priv->mii == NULL) {
> @@ -647,15 +644,15 @@ static int __init sis900_mii_probe (stru
> static u16 sis900_default_phy(struct net_device * net_dev)
> {
> struct sis900_private * sis_priv = net_dev->priv;
> - struct mii_phy *phy = NULL, *phy_home = NULL, *default_phy = NULL,
> *phy_lan = NULL; + struct mii_phy *phy = NULL, *phy_home = NULL,
> *default_phy = NULL; u16 status;
>
> for( phy=sis_priv->first_mii; phy; phy=phy->next ){
> status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
> status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
>
> - /* Link ON & Not select default PHY & not ghost PHY */
> - if ( (status & MII_STAT_LINK) && !default_phy && (phy->phy_types !=
> UNKNOWN) ) + /* Link ON & Not select deafalut PHY */
> + if ( (status & MII_STAT_LINK) && !(default_phy) )
> default_phy = phy;
> else{
> status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL);
> @@ -663,16 +660,12 @@ static u16 sis900_default_phy(struct net
> status | MII_CNTL_AUTO | MII_CNTL_ISOLATE);
> if( phy->phy_types == HOME )
> phy_home = phy;
> - else if (phy->phy_types == LAN)
> - phy_lan = phy;
> }
> }
>
> - if( !default_phy && phy_home )
> + if( (!default_phy) && phy_home )
> default_phy = phy_home;
> - else if( !default_phy && phy_lan )
> - default_phy = phy_lan;
> - else if ( !default_phy )
> + else if(!default_phy)
> default_phy = sis_priv->first_mii;
>
> if( sis_priv->mii != default_phy ){
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1
2004-06-21 0:46 2.6.7-mm1 Andrew Morton
` (5 preceding siblings ...)
2004-06-21 10:48 ` 2.6.7-mm1 Dominik Karall
@ 2004-06-21 11:48 ` Eric BEGOT
2004-06-21 14:25 ` 2.6.7-mm1 James Morris
2004-06-21 14:32 ` 2.6.7-mm1 (compile stats) John Cherry
2004-06-21 23:05 ` 2.6.7-mm1 I/O regression ? FabF
8 siblings, 1 reply; 23+ messages in thread
From: Eric BEGOT @ 2004-06-21 11:48 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Andrew Morton wrote:
>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm1/
>
>
>- Added a new vm tunable: /proc/sys/vm/vfs-cache-pressure.
>
> This allows tuning of the kernel's preference for reclaiming VFS caches
> versus pagecache.
>
> vfs-cache-pressure=0: dentry and inode caches aren't reclaimed at all
> vfs-cache-pressure=100: default - current behaviour
> vfs-cache-pressure > 100: reclaim the VFS caches harder.
>
> It seems that large values of vfs-cache-pressure are needed to make much
> difference: 1000 or more.
>
>- Under some circumstances the current page reclaim code can hold
> interrupts off for a long time. That is fixed here.
>
>- I went through and dropped a bunch of patches which don't seem to be very
> useful now - mainly debug stuff.
>
>- Various driver updates and random fixes
>
>
>
I can't compile 2.6.7-mm1. here are the errors :
CC security/selinux/hooks.o
security/selinux/hooks.c:4129: error: `selinux_netlink_send' undeclared here (not in a function)
security/selinux/hooks.c:4129: error: initializer element is not constant
security/selinux/hooks.c:4129: error: (near initialization for `selinux_ops.netlink_send')
security/selinux/hooks.c:4130: error: `selinux_netlink_recv' undeclared here (not in a function)
security/selinux/hooks.c:4130: error: initializer element is not constant
security/selinux/hooks.c:4130: error: (near initialization for `selinux_ops.netlink_recv')
make[2]: *** [security/selinux/hooks.o] Error 1
make[1]: *** [security/selinux] Error 2
make: *** [security] Error 2
With the same config, the 2.6.7 compiles perfectly. I join my .config.
Regards
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1
2004-06-21 11:48 ` 2.6.7-mm1 Eric BEGOT
@ 2004-06-21 14:25 ` James Morris
2004-06-21 14:38 ` 2.6.7-mm1 Eric BEGOT
0 siblings, 1 reply; 23+ messages in thread
From: James Morris @ 2004-06-21 14:25 UTC (permalink / raw)
To: Eric BEGOT; +Cc: Andrew Morton, linux-kernel, Stephen Smalley
On Mon, 21 Jun 2004, Eric BEGOT wrote:
> I can't compile 2.6.7-mm1. here are the errors :
>
> CC security/selinux/hooks.o
>
> security/selinux/hooks.c:4129: error: `selinux_netlink_send' undeclared here (not in a function)
>
> security/selinux/hooks.c:4129: error: initializer element is not constant
>
> security/selinux/hooks.c:4129: error: (near initialization for `selinux_ops.netlink_send')
>
> security/selinux/hooks.c:4130: error: `selinux_netlink_recv' undeclared here (not in a function)
>
> security/selinux/hooks.c:4130: error: initializer element is not constant
>
> security/selinux/hooks.c:4130: error: (near initialization for `selinux_ops.netlink_recv')
>
> make[2]: *** [security/selinux/hooks.o] Error 1
>
> make[1]: *** [security/selinux] Error 2
>
> make: *** [security] Error 2
>
>
> With the same config, the 2.6.7 compiles perfectly. I join my .config.
Works ok for me. What arch are you using?
Also, didn't see any attached config.
- James
--
James Morris
<jmorris@redhat.com>
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1 (compile stats)
2004-06-21 0:46 2.6.7-mm1 Andrew Morton
` (6 preceding siblings ...)
2004-06-21 11:48 ` 2.6.7-mm1 Eric BEGOT
@ 2004-06-21 14:32 ` John Cherry
2004-06-21 23:05 ` 2.6.7-mm1 I/O regression ? FabF
8 siblings, 0 replies; 23+ messages in thread
From: John Cherry @ 2004-06-21 14:32 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel@vger.kernel.org
Linux 2.6 (mm tree) Compile Statistics (gcc 3.2.2)
Warnings/Errors Summary
Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------
2.6.7-mm1 0w/0e 5w/0e 108w/0e 5w/0e 1w/0e 104w/0e
2.6.7-rc3-mm2 0w/0e 5w/0e 105w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc3-mm1 0w/0e 5w/0e 104w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc2-mm2 0w/0e 5w/0e 109w/10e 5w/0e 2w/0e 105w/2e
2.6.7-rc2-mm1 0w/0e 12w/0e 158w/13e 5w/0e 3w/0e 153w/4e
2.6.7-rc1-mm1 0w/0e 6w/0e 108w/0e 5w/0e 2w/0e 104w/0e
2.6.6-mm5 0w/0e 0w/0e 109w/5e 5w/0e 2w/0e 110w/0e
2.6.6-mm4 0w/0e 0w/0e 112w/9e 5w/0e 2w/5e 106w/1e
2.6.6-mm3 3w/9e 0w/0e 120w/26e 5w/0e 2w/0e 114w/10e
2.6.6-mm2 4w/11e 0w/0e 120w/24e 6w/0e 2w/0e 118w/9e
2.6.6-mm1 1w/0e 0w/0e 118w/25e 6w/0e 2w/0e 114w/10e
2.6.6-rc3-mm2 0w/0e 0w/0e 117w/ 0e 8w/0e 2w/0e 116w/0e
2.6.6-rc3-mm1 0w/0e 0w/0e 120w/10e 8w/0e 2w/0e 152w/2e
2.6.6-rc2-mm2 0w/0e 1w/5e 118w/ 0e 8w/0e 3w/0e 118w/0e
2.6.6-rc2-mm1 0w/0e 0w/0e 115w/ 0e 7w/0e 3w/0e 116w/0e
2.6.6-rc1-mm1 0w/0e 0w/7e 122w/ 0e 7w/0e 4w/0e 122w/0e
2.6.5-mm6 0w/0e 0w/0e 123w/ 0e 7w/0e 4w/0e 124w/0e
2.6.5-mm5 0w/0e 0w/0e 119w/ 0e 7w/0e 4w/0e 120w/0e
2.6.5-mm4 0w/0e 0w/0e 120w/ 0e 7w/0e 4w/0e 121w/0e
2.6.5-mm3 0w/0e 1w/0e 121w/12e 7w/0e 3w/0e 123w/0e
2.6.5-mm2 0w/0e 0w/0e 128w/12e 7w/0e 3w/0e 134w/0e
2.6.5-mm1 0w/0e 5w/0e 122w/ 0e 7w/0e 3w/0e 124w/0e
2.6.5-rc3-mm4 0w/0e 0w/0e 124w/ 0e 8w/0e 4w/0e 126w/0e
2.6.5-rc3-mm3 0w/0e 5w/0e 129w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm2 0w/0e 5w/0e 130w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm1 0w/0e 5w/0e 129w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm5 0w/0e 5w/0e 130w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm4 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm3 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm2 0w/0e 5w/0e 137w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc2-mm1 0w/0e 5w/0e 136w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc1-mm2 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.5-rc1-mm1 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.4-mm2 1w/2e 5w/2e 144w/10e 8w/0e 3w/2e 144w/0e
2.6.4-mm1 1w/0e 5w/0e 146w/ 5e 8w/0e 3w/0e 144w/0e
2.6.4-rc2-mm1 1w/0e 5w/0e 146w/12e 11w/0e 3w/0e 147w/2e
2.6.4-rc1-mm2 1w/0e 5w/0e 144w/ 0e 11w/0e 3w/0e 145w/0e
2.6.4-rc1-mm1 1w/0e 5w/0e 147w/ 5e 11w/0e 3w/0e 147w/0e
2.6.3-mm4 1w/0e 5w/0e 146w/ 0e 7w/0e 3w/0e 142w/0e
2.6.3-mm3 1w/2e 5w/2e 146w/15e 7w/0e 3w/2e 144w/5e
2.6.3-mm2 1w/8e 5w/0e 140w/ 0e 7w/0e 3w/0e 138w/0e
2.6.3-mm1 1w/0e 5w/0e 143w/ 5e 7w/0e 3w/0e 141w/0e
2.6.3-rc3-mm1 1w/0e 0w/0e 144w/13e 7w/0e 3w/0e 142w/3e
2.6.3-rc2-mm1 1w/0e 0w/265e 144w/ 5e 7w/0e 3w/0e 145w/0e
2.6.3-rc1-mm1 1w/0e 0w/265e 141w/ 5e 7w/0e 3w/0e 143w/0e
2.6.2-mm1 2w/0e 0w/264e 147w/ 5e 7w/0e 3w/0e 173w/0e
2.6.2-rc3-mm1 2w/0e 0w/265e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc2-mm2 0w/0e 0w/264e 145w/ 5e 7w/0e 3w/0e 171w/0e
2.6.2-rc2-mm1 0w/0e 0w/264e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc1-mm3 0w/0e 0w/265e 144w/ 8e 7w/0e 3w/0e 169w/0e
2.6.2-rc1-mm2 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.2-rc1-mm1 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.1-mm5 2w/5e 0w/264e 153w/11e 10w/0e 3w/0e 180w/0e
2.6.1-mm4 0w/821e 0w/264e 154w/ 5e 8w/1e 5w/0e 179w/0e
2.6.1-mm3 0w/0e 0w/0e 151w/ 5e 10w/0e 3w/0e 177w/0e
2.6.1-mm2 0w/0e 0w/0e 143w/ 5e 12w/0e 3w/0e 171w/0e
2.6.1-mm1 0w/0e 0w/0e 146w/ 9e 12w/0e 6w/0e 171w/0e
2.6.1-rc2-mm1 0w/0e 0w/0e 149w/ 0e 12w/0e 6w/0e 171w/4e
2.6.1-rc1-mm2 0w/0e 0w/0e 157w/15e 12w/0e 3w/0e 185w/4e
2.6.1-rc1-mm1 0w/0e 0w/0e 156w/10e 12w/0e 3w/0e 184w/2e
2.6.0-mm2 0w/0e 0w/0e 161w/ 0e 12w/0e 3w/0e 189w/0e
2.6.0-mm1 0w/0e 0w/0e 173w/ 0e 12w/0e 3w/0e 212w/0e
Web page with links to complete details:
http://developer.osdl.org/cherry/compile/
John
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1
2004-06-21 14:25 ` 2.6.7-mm1 James Morris
@ 2004-06-21 14:38 ` Eric BEGOT
2004-06-22 0:15 ` 2.6.7-mm1 Adrian Bunk
0 siblings, 1 reply; 23+ messages in thread
From: Eric BEGOT @ 2004-06-21 14:38 UTC (permalink / raw)
To: James Morris; +Cc: Andrew Morton, linux-kernel, Stephen Smalley
[-- Attachment #1: Type: text/plain, Size: 1137 bytes --]
James Morris wrote:
>On Mon, 21 Jun 2004, Eric BEGOT wrote:
>
>
>
>>I can't compile 2.6.7-mm1. here are the errors :
>>
>>CC security/selinux/hooks.o
>>
>>security/selinux/hooks.c:4129: error: `selinux_netlink_send' undeclared here (not in a function)
>>
>>security/selinux/hooks.c:4129: error: initializer element is not constant
>>
>>security/selinux/hooks.c:4129: error: (near initialization for `selinux_ops.netlink_send')
>>
>>security/selinux/hooks.c:4130: error: `selinux_netlink_recv' undeclared here (not in a function)
>>
>>security/selinux/hooks.c:4130: error: initializer element is not constant
>>
>>security/selinux/hooks.c:4130: error: (near initialization for `selinux_ops.netlink_recv')
>>
>>make[2]: *** [security/selinux/hooks.o] Error 1
>>
>>make[1]: *** [security/selinux] Error 2
>>
>>make: *** [security] Error 2
>>
>>
>>With the same config, the 2.6.7 compiles perfectly. I join my .config.
>>
>>
>
>Works ok for me. What arch are you using?
>
>Also, didn't see any attached config.
>
>
>- James
>
>
I'm on x86 and I use gcc version 3.3.4 (Debian). I forgot the ;config,
sorry. I attach it here :
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 31351 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=32
# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
#
# Performance-monitoring counters support
#
CONFIG_PERFCTR=y
CONFIG_PERFCTR_INIT_TESTS=y
CONFIG_PERFCTR_VIRTUAL=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_ASUS=y
CONFIG_ACPI_TOSHIBA=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_USE_VECTOR is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_DEBUG_DRIVER=y
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_CMDLINE_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
# CONFIG_INFTL is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_PDC202XX_FORCE is not set
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_TOS is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=y
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_SA1100 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_SLAB=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_SPINLINE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_LOCKMETER is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_KGDB is not set
CONFIG_FRAME_POINTER=y
# CONFIG_4KSTACKS is not set
CONFIG_SCHEDSTATS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y
^ permalink raw reply [flat|nested] 23+ messages in thread
* [patch] Re: 2.6.7-mm1 linker trouble with CONFIG_FB_RIVA_I2C=y and modular I2C
2004-06-21 2:06 ` 2.6.7-mm1 linker trouble with CONFIG_FB_RIVA_I2C=y and modular I2C Matthias Andree
@ 2004-06-21 15:29 ` Adrian Bunk
2004-06-22 15:11 ` Matthias Andree
0 siblings, 1 reply; 23+ messages in thread
From: Adrian Bunk @ 2004-06-21 15:29 UTC (permalink / raw)
To: Andrew Morton, linux-kernel, Antonino A. Daplas
On Mon, Jun 21, 2004 at 04:06:27AM +0200, Matthias Andree wrote:
> On Sun, 20 Jun 2004, Andrew Morton wrote:
>
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm1/
>
> This version causes linker trouble with
> CONFIG_I2C=m
> CONFIG_I2C_ALGOBIT=m
> CONFIG_FB_RIVA_I2C=y
>
> CC init/version.o
> LD init/built-in.o
> LD .tmp_vmlinux1
> drivers/built-in.o(.text+0xda101): In function `riva_setup_i2c_bus':
> : undefined reference to `i2c_bit_add_bus'
> drivers/built-in.o(.text+0xda218): In function `riva_delete_i2c_busses':
> : undefined reference to `i2c_bit_del_bus'
> drivers/built-in.o(.text+0xda237): In function `riva_delete_i2c_busses':
> : undefined reference to `i2c_bit_del_bus'
> drivers/built-in.o(.text+0xda2c9): In function `riva_do_probe_i2c_edid':
> : undefined reference to `i2c_transfer'
> make: *** [.tmp_vmlinux1] Error 1
>...
Thanks for this report.
The problem is:
FB_RIVA=y
FB_RIVA_I2C=y
I2C=m
I2C_ALGOBIT=m
The patch below fixes this.
Besides this, it contains:
- help text by Antonino A. Daplas
- converted spaces to tabs
- it was forgotten that FB_RIVA_I2C requires I2C_ALGOBIT
> Matthias Andree
cu
Adrian
--- linux-2.6.7-mm1-modular/drivers/video/Kconfig.old 2004-06-21 17:09:57.000000000 +0200
+++ linux-2.6.7-mm1-modular/drivers/video/Kconfig 2004-06-21 17:26:57.000000000 +0200
@@ -424,6 +424,8 @@
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
+ select I2C_ALGOBIT if FB_RIVA_I2C
+ select I2C if FB_RIVA_I2C
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
@@ -433,9 +435,17 @@
module will be called rivafb.
config FB_RIVA_I2C
- bool "Enable DDC Support"
- depends on FB_RIVA && I2C
- help
+ bool "Enable DDC Support"
+ depends on FB_RIVA
+ help
+ This enables I2C support for nVidia Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
^ permalink raw reply [flat|nested] 23+ messages in thread
* 2.6.7-mm1 I/O regression ?
2004-06-21 0:46 2.6.7-mm1 Andrew Morton
` (7 preceding siblings ...)
2004-06-21 14:32 ` 2.6.7-mm1 (compile stats) John Cherry
@ 2004-06-21 23:05 ` FabF
2004-06-21 23:18 ` FabF
8 siblings, 1 reply; 23+ messages in thread
From: FabF @ 2004-06-21 23:05 UTC (permalink / raw)
To: linux-kernel
Hi,
I've got strange I/O regression from 2.6.7-mm1.Here's a small fgrep
report :
2.6.7-mm1 (worst results ever seen)
-----------------------------------
Grepping /usr/bin :
23% cpu - 86.16 RT Sec - 1.77 Sec in KM
Entries scanned :
1569
90192 Kb analyzed this time
2.6.7-mm1 vm profile snippet
----------------------------
61.9360 vmlinux poll_idle
0.8899 vmlinux mark_offset_tsc
0.8857 vmlinux __copy_to_user_ll
0.6136 vmlinux mask_and_ack_8259A
0.5605 vmlinux do_anonymous_page
0.3445 vmlinux unix_poll
0.3240 vmlinux __switch_to
0.2016 vmlinux enable_8259A_irq
0.1448 vmlinux do_select
0.1336 vmlinux get_exec_dcookie
0.1128 vmlinux fget
0.0959 vmlinux schedule
2.6.7 (best results ever seen)
------------------------------
Grepping /usr/bin :
48% cpu - 37.61 RT Sec - 1.46 Sec in KM
Entries scanned :
1569
90184 Kb analyzed this time
2.6.7 vm Profile snippet
------------------------
80.4850 vmlinux poll_idle
0.9149 vmlinux mark_offset_tsc
0.7879 vmlinux mask_and_ack_8259A
0.4552 vmlinux do_wp_page
0.3943 vmlinux do_anonymous_page
0.2559 vmlinux enable_8259A_irq
0.2464 vmlinux __copy_to_user_ll
0.1721 vmlinux unix_poll
0.1302 vmlinux irq_entries_start
Well, profiles don't give a clue but fgrep RT delta is impressive.Did I missed something ?
PS : Those tests were made on ext3 partition.
Regards,
FabF
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1 I/O regression ?
2004-06-21 23:05 ` 2.6.7-mm1 I/O regression ? FabF
@ 2004-06-21 23:18 ` FabF
0 siblings, 0 replies; 23+ messages in thread
From: FabF @ 2004-06-21 23:18 UTC (permalink / raw)
To: linux-kernel
Oops, my clock seems running in double speed ?!!!! as related in other
messages already :) so forget about this one :)
Regards,
FabF
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1
2004-06-21 14:38 ` 2.6.7-mm1 Eric BEGOT
@ 2004-06-22 0:15 ` Adrian Bunk
0 siblings, 0 replies; 23+ messages in thread
From: Adrian Bunk @ 2004-06-22 0:15 UTC (permalink / raw)
To: Eric BEGOT; +Cc: James Morris, Andrew Morton, linux-kernel, Stephen Smalley
On Mon, Jun 21, 2004 at 04:38:41PM +0200, Eric BEGOT wrote:
>...
> I'm on x86 and I use gcc version 3.3.4 (Debian). I forgot the ;config,
> sorry. I attach it here :
>...
2.6.7-mm1 with your .config compiles for me on a Debian unstable.
Could you try the compilation with a freshly unpackaged kernel tree?
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [patch] 2.6.7-mm1: drivers/scsi/hosts.h -> scsi/scsi_host.h
2004-06-21 1:55 ` [patch] 2.6.7-mm1: drivers/scsi/hosts.h -> scsi/scsi_host.h Adrian Bunk
@ 2004-06-22 3:48 ` Jeff Garzik
0 siblings, 0 replies; 23+ messages in thread
From: Jeff Garzik @ 2004-06-22 3:48 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
applied
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1
2004-06-21 2:04 ` 2.6.7-mm1 Adrian Bunk
@ 2004-06-22 5:33 ` Sam Ravnborg
2004-07-17 20:46 ` [2.6 patch] move STANDALONE to drivers/base/Kconfig Adrian Bunk
0 siblings, 1 reply; 23+ messages in thread
From: Sam Ravnborg @ 2004-06-22 5:33 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, Sam Ravnborg, linux-kernel
On Mon, Jun 21, 2004 at 04:04:20AM +0200, Adrian Bunk wrote:
> On Sun, Jun 20, 2004 at 05:46:32PM -0700, Andrew Morton wrote:
> >...
> > +wanxl-firmware-build-fix.patch
> >
> > Fix allmodconfig build
> >...
>
> This option is in drivers/base/Kconfig, but the similar option
> STANDALONE [1] is in init/Kconfig.
>
> Shouldn't buoth be at the same place?
> What about moving STANDALONE ad let it depend on PREVENT_FIRMWARE_BUILD?
STANDALONE avoids any drivers not using external firmware.
PREVENT_FIRMWARE_BUILD just prevents the supplied firmware to be build.
So no I do not see they should be dependent.
But for sure they should be located in the same place.
This is drivers only information and not related to the actual
maturity of the code - so moving STANDALONE to drivers/base
makes sense to me.
Adrian - care to submit a patch?
Sam
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [patch] Re: 2.6.7-mm1 linker trouble with CONFIG_FB_RIVA_I2C=y and modular I2C
2004-06-21 15:29 ` [patch] " Adrian Bunk
@ 2004-06-22 15:11 ` Matthias Andree
0 siblings, 0 replies; 23+ messages in thread
From: Matthias Andree @ 2004-06-22 15:11 UTC (permalink / raw)
To: linux-kernel; +Cc: Adrian Bunk
On Mon, 21 Jun 2004, Adrian Bunk wrote:
> > drivers/built-in.o(.text+0xda101): In function `riva_setup_i2c_bus':
> > : undefined reference to `i2c_bit_add_bus'
> > drivers/built-in.o(.text+0xda218): In function `riva_delete_i2c_busses':
> > : undefined reference to `i2c_bit_del_bus'
> > drivers/built-in.o(.text+0xda237): In function `riva_delete_i2c_busses':
> > : undefined reference to `i2c_bit_del_bus'
> > drivers/built-in.o(.text+0xda2c9): In function `riva_do_probe_i2c_edid':
> > : undefined reference to `i2c_transfer'
> > make: *** [.tmp_vmlinux1] Error 1
> >...
>
> Thanks for this report.
You're welcome.
> The problem is:
> FB_RIVA=y
FB_RIVA alone is not a problem with I²C and _ALGOBIT =m,
FB_RIVA_I2C introduces the link failure. But nevermind, the problem is
fixed for me with your patch.
> FB_RIVA_I2C=y
> I2C=m
> I2C_ALGOBIT=m
>
> The patch below fixes this.
Danke!
--
Matthias Andree
Encrypted mail welcome: my GnuPG key ID is 0x052E7D95
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: 2.6.7-mm1
2004-06-21 11:43 ` 2.6.7-mm1 Dominik Karall
@ 2004-06-23 7:28 ` Daniele Venzano
0 siblings, 0 replies; 23+ messages in thread
From: Daniele Venzano @ 2004-06-23 7:28 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Jeff Garzik, Dominik Karall
On Mon, Jun 21, 2004 at 01:43:47PM +0200, Dominik Karall wrote:
> On Monday 21 June 2004 13:00, Andrew Morton wrote:
> > Bummer. Does this reversion fix it?
>
> Yes. With this patch it works, but it works in that way, that the wrong
> transceiver will be set as default. Maybe the current bk-netdev.patch is
> incompatible with this patch? Or something isn't ok in bk-netdev.patch?
> Because the SiS900 patch is long time in -mm tree now, and it worked before!
>
> greets dominik
>
> > diff -puN drivers/net/sis900.c~a drivers/net/sis900.c
> > --- 25/drivers/net/sis900.c~a 2004-06-21 04:00:05.242017088 -0700
> > +++ 25-akpm/drivers/net/sis900.c 2004-06-21 04:00:07.832623256 -0700
This patch fixes a real bug in the detection of the active PHY when the
hardware is slightly broken and reports multiple PHY trancievers. Jeff
has some issues with the patch, but said he would check on them.
Since Dominik's NIC stoppen working in 2.6.7-mm1, there is some change
in that version that broke the driver, but the patch in discussion here
is the same (reversed) that I wrote and test with Dominik.
--
-----------------------------
Daniele Venzano
Web: http://teg.homeunix.org
^ permalink raw reply [flat|nested] 23+ messages in thread
* [2.6 patch] move STANDALONE to drivers/base/Kconfig
2004-06-22 5:33 ` 2.6.7-mm1 Sam Ravnborg
@ 2004-07-17 20:46 ` Adrian Bunk
0 siblings, 0 replies; 23+ messages in thread
From: Adrian Bunk @ 2004-07-17 20:46 UTC (permalink / raw)
To: Andrew Morton, Sam Ravnborg, linux-kernel
> > This option is in drivers/base/Kconfig, but the similar option
> > STANDALONE [1] is in init/Kconfig.
> >
> > Shouldn't buoth be at the same place?
> > What about moving STANDALONE ad let it depend on PREVENT_FIRMWARE_BUILD?
>
> STANDALONE avoids any drivers not using external firmware.
> PREVENT_FIRMWARE_BUILD just prevents the supplied firmware to be build.
> So no I do not see they should be dependent.
>
> But for sure they should be located in the same place.
> This is drivers only information and not related to the actual
> maturity of the code - so moving STANDALONE to drivers/base
> makes sense to me.
> Adrian - care to submit a patch?
Sorry for the late answer, the patch is below.
> Sam
cu
Adrian
Move STANDALONE from init/Kconfig to drivers/base/Kconfig .
This way, it's besides PREVENT_FIRMWARE_BUILD.
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
--- linux-2.6.8-rc1-mm1-full/init/Kconfig.old 2004-07-17 20:07:03.000000000 +0200
+++ linux-2.6.8-rc1-mm1-full/init/Kconfig 2004-07-17 20:07:39.000000000 +0200
@@ -41,15 +41,6 @@
If unsure, say Y
-config STANDALONE
- bool "Select only drivers that don't need compile-time external firmware" if EXPERIMENTAL
- default y
- help
- Select this option if you don't have magic firmware for drivers that
- need it.
-
- If unsure, say Y.
-
config BROKEN
bool
depends on !CLEAN_COMPILE
--- linux-2.6.8-rc1-mm1-full/drivers/base/Kconfig.old 2004-07-17 20:06:36.000000000 +0200
+++ linux-2.6.8-rc1-mm1-full/drivers/base/Kconfig 2004-07-17 20:07:34.000000000 +0200
@@ -1,5 +1,14 @@
menu "Generic Driver Options"
+config STANDALONE
+ bool "Select only drivers that don't need compile-time external firmware" if EXPERIMENTAL
+ default y
+ help
+ Select this option if you don't have magic firmware for drivers that
+ need it.
+
+ If unsure, say Y.
+
config PREVENT_FIRMWARE_BUILD
bool "Prevent firmware from being built"
default y
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2004-07-17 20:46 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-21 0:46 2.6.7-mm1 Andrew Morton
2004-06-21 1:40 ` 2.6.7-mm1: empty help text for FB_RIVA_I2C Adrian Bunk
2004-06-21 7:38 ` Antonino A. Daplas
2004-06-21 1:43 ` [patch] 2.6.7-mm1: R8169_NAPI help text Adrian Bunk
2004-06-21 1:55 ` [patch] 2.6.7-mm1: drivers/scsi/hosts.h -> scsi/scsi_host.h Adrian Bunk
2004-06-22 3:48 ` Jeff Garzik
2004-06-21 2:04 ` 2.6.7-mm1 Adrian Bunk
2004-06-22 5:33 ` 2.6.7-mm1 Sam Ravnborg
2004-07-17 20:46 ` [2.6 patch] move STANDALONE to drivers/base/Kconfig Adrian Bunk
2004-06-21 2:06 ` 2.6.7-mm1 linker trouble with CONFIG_FB_RIVA_I2C=y and modular I2C Matthias Andree
2004-06-21 15:29 ` [patch] " Adrian Bunk
2004-06-22 15:11 ` Matthias Andree
2004-06-21 10:48 ` 2.6.7-mm1 Dominik Karall
2004-06-21 11:00 ` 2.6.7-mm1 Andrew Morton
2004-06-21 11:43 ` 2.6.7-mm1 Dominik Karall
2004-06-23 7:28 ` 2.6.7-mm1 Daniele Venzano
2004-06-21 11:48 ` 2.6.7-mm1 Eric BEGOT
2004-06-21 14:25 ` 2.6.7-mm1 James Morris
2004-06-21 14:38 ` 2.6.7-mm1 Eric BEGOT
2004-06-22 0:15 ` 2.6.7-mm1 Adrian Bunk
2004-06-21 14:32 ` 2.6.7-mm1 (compile stats) John Cherry
2004-06-21 23:05 ` 2.6.7-mm1 I/O regression ? FabF
2004-06-21 23:18 ` FabF
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox