public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Fabio Coatti <cova@ferrara.linux.it>
To: linux-kernel@vger.kernel.org
Cc: Jeff Garzik <jgarzik@pobox.com>
Subject: SATA problems in 2.6.7-mm[1,5] vanilla works
Date: Thu, 1 Jul 2004 23:52:16 +0200	[thread overview]
Message-ID: <200407012352.16816.cova@ferrara.linux.it> (raw)

[-- Attachment #1: Type: text/plain, Size: 6452 bytes --]

I'm having problems with sata starting from 2.6.7-mm1: 
the system hangs at boot, during the sata bus scan.

reverting this patch 
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm1/broken-out/bk-libata.patch
on -mm1 restores the right behaviour.
(BTW: it reports IRQ 18: nobody cared during sata scan, but I can provide in a 
(hopefully) short time boot messages captured by serial console, if needed.)

I can make any test needed to narrow down the problem, just let me know.

system:
PIV 2.8 HT, i875p MB (ICH5)
graphic board: nvidia but without nvidia modules loaded.
2.6.7 vanilla config attached (-mm1 config is obtained by make oldconfig from 
this)

lspci -v:
[root@kefk root]# lspci -v
00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: bus master, fast devsel, latency 0
        Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [e4] #09 [2106]
        Capabilities: [a0] AGP version 3.0

00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02) 
(prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, fast devsel, latency 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        Memory behind bridge: f8000000-f9ffffff
        Prefetchable memory behind bridge: f0000000-f7ffffff

00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 02) 
(prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, fast devsel, latency 32
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: fa000000-fa0fffff

00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at bc00 [size=32]

00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at b000 [size=32]

00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at b400 [size=32]

00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00 [UHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at b800 [size=32]

00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02) (prog-if 20 [EHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at fa200000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] #0a [20a0]

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2) (prog-if 
00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fa100000-fa1fffff

00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
        Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 
02) (prog-if 8a [Master SecP PriP])
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at f000 [size=16]
        Memory at 40000000 (32-bit, non-prefetchable) [size=1K]

00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 
02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 18
        I/O ports at c000 [size=8]
        I/O ports at c400 [size=4]
        I/O ports at c800 [size=8]
        I/O ports at cc00 [size=4]
        I/O ports at d000 [size=16]

00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: medium devsel, IRQ 17
        I/O ports at 0500 [size=32]

00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio 
Controller (rev 02)
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at d800 [size=256]
        I/O ports at dc00 [size=64]
        Memory at fa202000 (32-bit, non-prefetchable) [size=512]
        Memory at fa203000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2

01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] 
(rev a1) (prog-if 00 [VGA])
        Subsystem: Unknown device 1682:1280
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 16
        Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0

02:01.0 Ethernet controller: Intel Corp.: Unknown device 1019
        Subsystem: ABIT Computer Corp.: Unknown device 1014
        Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 18
        Memory at fa000000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at 9000 [size=32]
        Capabilities: [dc] Power Management version 2

03:06.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
        Subsystem: Adaptec AHA-2904/Integrated AIC-7850
        Flags: bus master, medium devsel, latency 32, IRQ 22
        I/O ports at a000 [disabled] [size=256]
        Memory at fa100000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 1


-- 
Fabio Coatti       http://members.ferrara.linux.it/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.

[-- Attachment #2: config.gz --]
[-- Type: application/x-gzip, Size: 8029 bytes --]

             reply	other threads:[~2004-07-01 21:53 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-07-01 21:52 Fabio Coatti [this message]
2004-07-01 21:54 ` SATA problems in 2.6.7-mm[1,5] vanilla works Jeff Garzik
2004-07-01 22:25   ` Fabio Coatti
2004-07-02  2:42     ` Danny ter Haar
2004-07-02 13:32       ` Fabio Coatti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200407012352.16816.cova@ferrara.linux.it \
    --to=cova@ferrara.linux.it \
    --cc=jgarzik@pobox.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox