From: David Gibson <hermes@gibson.dropbear.id.au>
To: Jeff Garzik <jgarzik@pobox.com>,
Francois Romieu <romieu@fr.zoreil.com>,
Linux kernel mailing list <linux-kernel@vger.kernel.org>,
jt@hpl.hp.com, Dan Williams <dcbw@redhat.com>,
Pavel Roskin <proski@gnu.org>,
Orinoco Development List <orinoco-devel@lists.sourceforge.net>
Subject: [6/15] orinoco merge preliminaries - spam stoppers
Date: Wed, 28 Jul 2004 16:55:50 +1000 [thread overview]
Message-ID: <20040728065550.GI16908@zax> (raw)
In-Reply-To: <20040728065526.GH16908@zax>
Anti-spam obfuscate most email addresses in the orinoco driver files.
Yes, this is closing gate long after the sheep have run, but I guess
it can't hurt.
Signed-off-by: David Gibson <hermes@gibson.dropbear.id.au>
Index: working-2.6/drivers/net/wireless/orinoco.c
===================================================================
--- working-2.6.orig/drivers/net/wireless/orinoco.c
+++ working-2.6/drivers/net/wireless/orinoco.c
@@ -3,15 +3,16 @@
* A driver for Hermes or Prism 2 chipset based PCMCIA wireless
* adaptors, with Lucent/Agere, Intersil or Symbol firmware.
*
- * Copyright (C) 2000 David Gibson, Linuxcare Australia <hermes@gibson.dropbear.id.au>
+ * Copyright (C) 2000 David Gibson, Linuxcare Australia <hermes AT gibson.dropbear.id.au>
* With some help from :
- * Copyright (C) 2001 Jean Tourrilhes, HP Labs <jt@hpl.hp.com>
- * Copyright (C) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright (C) 2001 Jean Tourrilhes, HP Labs <jt AT hpl.hp.com>
+ * Copyright (C) 2001 Benjamin Herrenschmidt <benh AT kernel.crashing.org>
*
* Based on dummy_cs.c 1.27 2000/06/12 21:27:25
*
- * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy@fasta.fh-dortmund.de>
- * http://www.fasta.fh-dortmund.de/users/andy/wvlan/
+ * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
+ * AT fasta.fh-dortmund.de>
+ * http://www.fasta.fh-dortmund.de/users/andy/wvlan/
*
* The contents of this file are subject to the Mozilla Public License
* Version 1.1 (the "License"); you may not use this file except in
@@ -24,7 +25,7 @@
* limitations under the License.
*
* The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David
+ * <dahinds AT users.sourceforge.net>. Portions created by David
* A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
* Reserved.
*
@@ -82,7 +83,7 @@
* o Clean up RID definitions in hermes.h, other cleanups
*
* v0.04b -> v0.04c - 24/4/2001 - Jean II
- * o Tim Hurley <timster@seiki.bliztech.com> reported a D-Link card
+ * o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card
* with vendor 02 and firmware 0.08. Added in the capabilities...
* o Tested Lucent firmware 7.28, everything works...
*
@@ -106,14 +107,14 @@
*
* v0.05c -> v0.05d - 5/5/2001 - Jean II
* o Workaround to SNAP decapsulate frame from LinkSys AP
- * original patch from : Dong Liu <dliu@research.bell-labs.com>
+ * original patch from : Dong Liu <dliu AT research.bell-labs.com>
* (note : the memcmp bug was mine - fixed)
* o Remove set_retry stuff, no firmware support it (bloat--).
*
* v0.05d -> v0.06 - 25/5/2001 - Jean II
- * Original patch from "Hong Lin" <alin@redhat.com>,
- * "Ian Kinner" <ikinner@redhat.com>
- * and "David Smith" <dsmith@redhat.com>
+ * Original patch from "Hong Lin" <alin AT redhat.com>,
+ * "Ian Kinner" <ikinner AT redhat.com>
+ * and "David Smith" <dsmith AT redhat.com>
* o Init of priv->tx_rate_ctrl in firmware specific section.
* o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh !
* o Spectrum card always need cor_reset (for every reset)
@@ -137,7 +138,7 @@
* wishes to reduce the number of unecessary messages.
* o Removed bogus message on CRC error.
* o Merged fixeds for v0.08 Prism 2 firmware from William Waghorn
- * <willwaghorn@yahoo.co.uk>
+ * <willwaghorn AT yahoo.co.uk>
* o Slight cleanup/re-arrangement of firmware detection code.
*
* v0.06d -> v0.06e - 1/8/2001 - David Gibson
@@ -159,7 +160,7 @@
* v0.07 -> v0.07a - 1/10/3001 - Jean II
* o Add code to read Symbol firmware revision, inspired by latest code
* in Spectrum24 by Lee John Keyser-Allen - Thanks Lee !
- * o Thanks to Jared Valentine <hidden@xmission.com> for "providing" me
+ * o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me
* a 3Com card with a recent firmware, fill out Symbol firmware
* capabilities of latest rev (2.20), as well as older Symbol cards.
* o Disable Power Management in newer Symbol firmware, the API
Index: working-2.6/drivers/net/wireless/orinoco_pci.c
===================================================================
--- working-2.6.orig/drivers/net/wireless/orinoco_pci.c
+++ working-2.6/drivers/net/wireless/orinoco_pci.c
@@ -6,14 +6,14 @@
* Specifically here we're talking about the Linksys WMP11
*
* Some of this code is borrowed from orinoco_plx.c
- * Copyright (C) 2001 Daniel Barlow <dan@telent.net>
+ * Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
* Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
* has been copied from it. linux-wlan-ng-0.1.10 is originally :
* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
* This file originally written by:
- * Copyright (C) 2001 Jean Tourrilhes <jt@hpl.hp.com>
+ * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com>
* And is now maintained by:
- * Copyright (C) 2002 David Gibson, IBM Corporation <herme@gibson.dropbear.id.au>
+ * Copyright (C) 2002 David Gibson, IBM Corporation <herme AT gibson.dropbear.id.au>
*
* The contents of this file are subject to the Mozilla Public License
* Version 1.1 (the "License"); you may not use this file except in
Index: working-2.6/drivers/net/wireless/orinoco_plx.c
===================================================================
--- working-2.6.orig/drivers/net/wireless/orinoco_plx.c
+++ working-2.6/drivers/net/wireless/orinoco_plx.c
@@ -3,7 +3,7 @@
* Driver for Prism II devices which would usually be driven by orinoco_cs,
* but are connected to the PCI bus by a PLX9052.
*
- * Copyright (C) 2001 Daniel Barlow <dan@telent.net>
+ * Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
*
* The contents of this file are subject to the Mozilla Public License
* Version 1.1 (the "License"); you may not use this file except in
@@ -311,9 +311,9 @@
{0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,}, /* Linksys WDT11 */
{0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,}, /* USR 2415 */
{0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,}, /* Belkin F5D6000 tested by
- Brendan W. McAdams <rit@jacked-in.org> */
+ Brendan W. McAdams <rit AT jacked-in.org> */
{0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,}, /* 3Com AirConnect PCI tested by
- Damien Persohn <damien@persohn.net> */
+ Damien Persohn <damien AT persohn.net> */
{0,},
};
Index: working-2.6/drivers/net/wireless/orinoco_tmd.c
===================================================================
--- working-2.6.orig/drivers/net/wireless/orinoco_tmd.c
+++ working-2.6/drivers/net/wireless/orinoco_tmd.c
@@ -3,8 +3,8 @@
* Driver for Prism II devices which would usually be driven by orinoco_cs,
* but are connected to the PCI bus by a TMD7160.
*
- * Copyright (C) 2003 Joerg Dorchain <joerg@dorchain.net>
- * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow <dan@telent.net>
+ * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net>
+ * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
*
* The contents of this file are subject to the Mozilla Public License
* Version 1.1 (the "License"); you may not use this file except in
--
David Gibson | For every complex problem there is a
david AT gibson.dropbear.id.au | solution which is simple, neat and
| wrong.
http://www.ozlabs.org/people/dgibson
next prev parent reply other threads:[~2004-07-28 7:13 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-12 19:33 [PATCH] Slowly update in-kernel orinoco drivers to upstream current CVS Francois Romieu
2004-07-14 18:37 ` Jeff Garzik
2004-07-15 1:01 ` David Gibson
2004-07-17 11:45 ` Francois Romieu
2004-07-27 17:18 ` Jeff Garzik
2004-07-28 6:51 ` [0/15] orinoco merge preliminaries David Gibson
2004-07-28 6:53 ` [1/15] orinoco merge preliminaries - squash backwards compatibility David Gibson
2004-07-28 6:53 ` [2/15] orinoco merge preliminaries - rearrange code David Gibson
2004-07-28 6:54 ` [3/15] orinoco merge preliminaries - use netdev_priv() David Gibson
2004-07-28 6:54 ` [4/15] orinoco merge preliminaries - use ALIGN() David Gibson
2004-07-28 6:55 ` [5/15] orinoco merge preliminaries - use ARRAY_SIZE() David Gibson
2004-07-28 6:55 ` David Gibson [this message]
2004-07-28 6:56 ` [7/15] orinoco merge preliminaries - comment/whitespace/spelling updates David Gibson
2004-07-28 6:57 ` [8/15] orinoco merge preliminaries - use BUG_ON() David Gibson
2004-07-28 6:58 ` [9/15] orinoco merge preliminaries - make things static David Gibson
2004-07-28 6:58 ` [10/15] orinoco merge preliminaries - miscelaneous David Gibson
2004-07-28 6:59 ` [11/15] orinoco merge preliminaries - use name/version macros David Gibson
2004-07-28 6:59 ` [12/15] orinoco merge preliminaries - remove unneeded #includes David Gibson
2004-07-28 7:00 ` [13/15] orinoco merge preliminaries - don't typedef structs David Gibson
2004-07-28 7:00 ` [14/15] orinoco merge preliminaries - more HW data David Gibson
2004-07-28 7:01 ` [15/15] orinoco merge preliminaries - update authorship information David Gibson
2004-07-28 16:55 ` Jeff Garzik
2004-07-28 17:36 ` [6/15] orinoco merge preliminaries - spam stoppers Matt Mackall
2004-07-28 22:50 ` [0/15] orinoco merge preliminaries Francois Romieu
2004-07-29 0:19 ` David Gibson
2004-07-29 23:19 ` Francois Romieu
2004-09-08 15:18 ` Dan Williams
2004-09-09 3:13 ` Jeff Garzik
2004-09-09 19:51 ` Francois Romieu
2004-07-14 20:15 ` [PATCH] Slowly update in-kernel orinoco drivers to upstream current CVS Pavel Roskin
2004-07-15 1:26 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040728065550.GI16908@zax \
--to=hermes@gibson.dropbear.id.au \
--cc=dcbw@redhat.com \
--cc=jgarzik@pobox.com \
--cc=jt@hpl.hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=orinoco-devel@lists.sourceforge.net \
--cc=proski@gnu.org \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox