From: Martin Mares <mj@ucw.cz>
To: Jon Smirl <jonsmirl@yahoo.com>
Cc: Matthew Wilcox <willy@debian.org>,
Jesse Barnes <jbarnes@engr.sgi.com>,
Christoph Hellwig <hch@infradead.org>,
lkml <linux-kernel@vger.kernel.org>,
linux-pci@atrey.karlin.mff.cuni.cz,
Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: Re: Exposing ROM's though sysfs
Date: Fri, 30 Jul 2004 22:41:21 +0200 [thread overview]
Message-ID: <20040730204121.GA5718@ucw.cz> (raw)
In-Reply-To: <20040730203225.81054.qmail@web14926.mail.yahoo.com>
Hello!
> Reasons for ROMs in sysfs:
Good ones, although I believe than re-initializing cards after resume
should better be in the kernel.
> The only time the ROM will get cached is when you load a kernel device
> driver for a card that implements minimalistic PCI decoding (very few
> cards) and the driver asks for it. The driver would ask for caching
> since it knows that the decoder lines aren't complete.
And, even with your list of reasons, it is still very unlikely that anybody
will ever need the cached copy :-) I still do not see a device which
would have shared decoders AND needed such initialization in userspace.
(Also, while we are speaking about video hardware -- they either have no
kernel driver, so nobody can ask for the copy, or they have one, but in
that case the BIOS mode switching calls and similar things can be accomplished
by the kernel driver with no need of messing with the ROM in the userspace.)
Have a nice fortnight
--
Martin `MJ' Mares <mj@ucw.cz> http://atrey.karlin.mff.cuni.cz/~mj/
Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth
How an engineer writes a program: Start by debugging an empty file...
next prev parent reply other threads:[~2004-07-30 20:42 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-30 16:53 Exposing ROM's though sysfs Jon Smirl
2004-07-30 17:10 ` Jesse Barnes
2004-07-30 17:19 ` Jesse Barnes
2004-07-30 17:24 ` Christoph Hellwig
2004-07-30 17:57 ` Jesse Barnes
2004-07-30 18:06 ` Jesse Barnes
2004-07-30 18:12 ` Matthew Wilcox
2004-07-30 18:12 ` Jesse Barnes
2004-07-30 18:20 ` Martin Mares
2004-07-30 18:49 ` Jesse Barnes
2004-07-30 19:55 ` Greg KH
2004-07-30 20:05 ` Jon Smirl
2004-07-30 20:16 ` Jesse Barnes
2004-07-30 20:29 ` Greg KH
2004-07-30 18:59 ` Jon Smirl
2004-07-30 19:04 ` Matthew Wilcox
2004-07-30 19:30 ` Jon Smirl
2004-07-30 19:35 ` Martin Mares
2004-07-30 19:39 ` Jon Smirl
2004-07-30 19:46 ` Martin Mares
2004-07-30 20:03 ` Jon Smirl
2004-07-30 20:10 ` Martin Mares
2004-07-30 20:13 ` Martin Mares
2004-07-30 20:25 ` Jesse Barnes
2004-07-30 20:32 ` Jon Smirl
2004-07-30 20:41 ` Martin Mares [this message]
2004-07-30 20:49 ` Jesse Barnes
2004-07-30 20:54 ` Martin Mares
2004-07-30 21:00 ` Jesse Barnes
2004-07-30 21:07 ` Jon Smirl
2004-07-30 21:12 ` Jesse Barnes
2004-07-30 19:47 ` Vojtech Pavlik
2004-07-30 22:18 ` Thomas Bogendoerfer
2004-07-30 22:39 ` Alan Cox
2004-07-30 19:25 ` Jon Smirl
2004-07-30 19:35 ` Vojtech Pavlik
2004-07-30 19:41 ` Jon Smirl
2004-07-30 19:48 ` Vojtech Pavlik
2004-07-30 20:20 ` Jesse Barnes
2004-07-30 22:41 ` Alan Cox
[not found] <1091207136.2762.181.camel@rohan.arnor.net>
2004-07-30 17:24 ` Jon Smirl
2004-07-30 19:14 ` Vojtech Pavlik
2004-07-30 20:26 ` Jesse Barnes
2004-07-30 22:36 ` Alan Cox
2004-08-03 21:41 ` Benjamin Herrenschmidt
2004-08-04 0:55 ` Jesse Barnes
2004-08-04 0:59 ` Benjamin Herrenschmidt
2004-08-04 1:37 ` Jon Smirl
2004-08-04 1:57 ` Benjamin Herrenschmidt
2004-08-04 2:16 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040730204121.GA5718@ucw.cz \
--to=mj@ucw.cz \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=hch@infradead.org \
--cc=jbarnes@engr.sgi.com \
--cc=jonsmirl@yahoo.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
--cc=willy@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox