* USB troubles in rc2
@ 2004-08-02 19:00 Luis Miguel García Mancebo
2004-08-03 0:26 ` Greg KH
0 siblings, 1 reply; 24+ messages in thread
From: Luis Miguel García Mancebo @ 2004-08-02 19:00 UTC (permalink / raw)
To: LKML; +Cc: akpm
Hello,
I have a nforce2 motherboard. I have to report that recent changes in usb
code make my board don't work at all.
In 2.6.7-mm7, I just reverted the bk-usb.patch and the things started to
work, but now it's on mainstream, so I cannot make it work.
Do you want for me to do some tests?
Thanks.
P.S.: Please, CC me as I'm not subscribed.
--
Luis Miguel García Mancebo
Universidad de Deusto / Deusto University
Spain
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: USB troubles in rc2
2004-08-02 19:00 USB troubles in rc2 Luis Miguel García Mancebo
@ 2004-08-03 0:26 ` Greg KH
2004-08-03 2:08 ` Michael Guterl
2004-08-03 8:46 ` Luis Miguel García Mancebo
0 siblings, 2 replies; 24+ messages in thread
From: Greg KH @ 2004-08-03 0:26 UTC (permalink / raw)
To: Luis Miguel Garc?a Mancebo; +Cc: LKML, akpm, linux-usb-devel
On Mon, Aug 02, 2004 at 09:00:54PM +0200, Luis Miguel Garc?a Mancebo wrote:
> Hello,
>
> I have a nforce2 motherboard. I have to report that recent changes in usb
> code make my board don't work at all.
>
> In 2.6.7-mm7, I just reverted the bk-usb.patch and the things started to
> work, but now it's on mainstream, so I cannot make it work.
>
> Do you want for me to do some tests?
Yes please. What exactly "does not work"?
Also, let's cc: the linux-usb-devel mailing list to try to help out
here...
thanks,
greg k-h
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: USB troubles in rc2
2004-08-03 0:26 ` Greg KH
@ 2004-08-03 2:08 ` Michael Guterl
2004-08-03 6:49 ` Trever L. Adams
2004-08-03 8:46 ` Luis Miguel García Mancebo
1 sibling, 1 reply; 24+ messages in thread
From: Michael Guterl @ 2004-08-03 2:08 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1377 bytes --]
I have an nforce2 motherboard also (Asus A7N8X Deluxe). And I'm
having issues as well, like the parent poster I had to previously
revert bk-usb.patch when using mm kernels. Now the problem persists
in vanilla 2.6.8-rc2. Specifically my problem is that Starting Cups
hangs during bootup. I removed USB support and it booted fine, but I
can't live without USB, keyboard, mouse, and external hard drive are
all USB. Below is my config file hopefully it will help.
On Mon, 2 Aug 2004 17:26:34 -0700, Greg KH <greg@kroah.com> wrote:
> On Mon, Aug 02, 2004 at 09:00:54PM +0200, Luis Miguel Garc?a Mancebo wrote:
> > Hello,
> >
> > I have a nforce2 motherboard. I have to report that recent changes in usb
> > code make my board don't work at all.
> >
> > In 2.6.7-mm7, I just reverted the bk-usb.patch and the things started to
> > work, but now it's on mainstream, so I cannot make it work.
> >
> > Do you want for me to do some tests?
>
> Yes please. What exactly "does not work"?
>
> Also, let's cc: the linux-usb-devel mailing list to try to help out
> here...
>
> thanks,
>
> greg k-h
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
[-- Attachment #2: config --]
[-- Type: application/octet-stream, Size: 24010 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_UHCI_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: USB troubles in rc2
2004-08-03 2:08 ` Michael Guterl
@ 2004-08-03 6:49 ` Trever L. Adams
0 siblings, 0 replies; 24+ messages in thread
From: Trever L. Adams @ 2004-08-03 6:49 UTC (permalink / raw)
To: Michael Guterl; +Cc: linux-kernel
I have the same board. I cannot get USB and 1394 to cohabitate. On my
system, when I insert a USB device, the 1394 system shows itself as
handling the interrupt and the USB remains dormant.
Trever
On Mon, 2004-08-02 at 22:08 -0400, Michael Guterl wrote:
> I have an nforce2 motherboard also (Asus A7N8X Deluxe). And I'm
> having issues as well, like the parent poster I had to previously
> revert bk-usb.patch when using mm kernels. Now the problem persists
> in vanilla 2.6.8-rc2. Specifically my problem is that Starting Cups
> hangs during bootup. I removed USB support and it booted fine, but I
> can't live without USB, keyboard, mouse, and external hard drive are
> all USB. Below is my config file hopefully it will help.
--
"You can surrender Without a prayer But never ever pray Pray without
surrender You can fight Fight without ever wining But you can never ever
win Win without fight" -- Niel Peart
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: USB troubles in rc2
2004-08-03 0:26 ` Greg KH
2004-08-03 2:08 ` Michael Guterl
@ 2004-08-03 8:46 ` Luis Miguel García Mancebo
2004-08-03 13:57 ` Greg KH
1 sibling, 1 reply; 24+ messages in thread
From: Luis Miguel García Mancebo @ 2004-08-03 8:46 UTC (permalink / raw)
To: Greg KH; +Cc: LKML, akpm, linux-usb-devel
Well, sorry, here is the info:
I think the problem is with the ohci_hcd:
____________________________________________________________________________________
With 2.6.8-rc2-mm2 (and even with bk-usb.patch reverted), my digital camera
don't work in usb-storage mode nor ptp mode. My usb tablet don't work either.
And I get this (even the camera is on, but it don't appear):
root@evanescence / # cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-rc2-love3 ehci_hcd
S: Product=nVidia Corporation nForce2 USB Controller
S: SerialNumber=0000:00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
___________________________________________________________________________________
With 2.6.7-mm7 don't work either, but I can revert the bk-usb.patch in the
andrew tree and all works ok. Even the camera:
root@evanescence /home/ktech # cat /proc/bus/usb/devices
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.7-love8-udev2 ehci_hcd
S: Product=nVidia Corporation nForce2 USB Controller
S: SerialNumber=0000:00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.7-love8-udev2 ohci_hcd
S: Product=nVidia Corporation nForce2 USB Controller (#2)
S: SerialNumber=0000:00:02.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.7-love8-udev2 ohci_hcd
S: Product=nVidia Corporation nForce2 USB Controller
S: SerialNumber=0000:00:02.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=054c ProdID=0010 Rev= 4.10
S: Manufacturer=Sony
S: Product=Sony DSC
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
So I think the changes went mainstream, so I don't have nothing to revert now.
If any of you want me to try something, please ask me (CC me as I'm not
subscribed).
Thanks.
El Martes, 3 de Agosto de 2004 02:26, Greg KH escribió:
> On Mon, Aug 02, 2004 at 09:00:54PM +0200, Luis Miguel Garc?a Mancebo wrote:
> > Hello,
> >
> > I have a nforce2 motherboard. I have to report that recent changes in
> > usb code make my board don't work at all.
> >
> > In 2.6.7-mm7, I just reverted the bk-usb.patch and the things started to
> > work, but now it's on mainstream, so I cannot make it work.
> >
> > Do you want for me to do some tests?
>
> Yes please. What exactly "does not work"?
>
> Also, let's cc: the linux-usb-devel mailing list to try to help out
> here...
>
> thanks,
>
> greg k-h
--
Luis Miguel García Mancebo
Universidad de Deusto / Deusto University
Spain
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: USB troubles in rc2
2004-08-03 8:46 ` Luis Miguel García Mancebo
@ 2004-08-03 13:57 ` Greg KH
2004-08-03 23:04 ` Luis Miguel García Mancebo
0 siblings, 1 reply; 24+ messages in thread
From: Greg KH @ 2004-08-03 13:57 UTC (permalink / raw)
To: Luis Miguel Garc?a Mancebo; +Cc: LKML, akpm, linux-usb-devel
On Tue, Aug 03, 2004 at 10:46:57AM +0200, Luis Miguel Garc?a Mancebo wrote:
> With 2.6.7-mm7 don't work either, but I can revert the bk-usb.patch in the
> andrew tree and all works ok. Even the camera:
So 2.6.7 (with no patches) worked for you? Did 2.6.8-rc1 break? Or was
it 2.6.8-rc2 that broke your box?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: USB troubles in rc2
2004-08-03 13:57 ` Greg KH
@ 2004-08-03 23:04 ` Luis Miguel García Mancebo
2004-08-04 20:32 ` Michael Guterl
0 siblings, 1 reply; 24+ messages in thread
From: Luis Miguel García Mancebo @ 2004-08-03 23:04 UTC (permalink / raw)
To: Greg KH; +Cc: LKML, akpm, linux-usb-devel
El Martes, 3 de Agosto de 2004 15:57, Greg KH escribió:
> On Tue, Aug 03, 2004 at 10:46:57AM +0200, Luis Miguel Garc?a Mancebo wrote:
> > With 2.6.7-mm7 don't work either, but I can revert the bk-usb.patch in
> > the andrew tree and all works ok. Even the camera:
>
> So 2.6.7 (with no patches) worked for you? Did 2.6.8-rc1 break? Or was
> it 2.6.8-rc2 that broke your box?
>
> thanks,
>
> greg k-h
I have been testing various kernels. Here's the restult:
2.6.7-mm7 DON'T WORK
2.6.7-mm7 (with bk-usb.patch reverted) WORKS
2.6.7-rc1 DON'T WORK
2.6.7-rc2 DON'T WORK
So I think the problems started on vanilla in 2.6.8-rc1 but was already there
in 2.6.7-mm7.
Thanks a lot. Any patch do you want for me to test?
--
Luis Miguel García Mancebo
Universidad de Deusto / Deusto University
Spain
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: USB troubles in rc2
2004-08-03 23:04 ` Luis Miguel García Mancebo
@ 2004-08-04 20:32 ` Michael Guterl
2004-08-05 1:20 ` [linux-usb-devel] " David Brownell
0 siblings, 1 reply; 24+ messages in thread
From: Michael Guterl @ 2004-08-04 20:32 UTC (permalink / raw)
To: Luis Miguel García Mancebo; +Cc: Greg KH, LKML, akpm, linux-usb-devel
2.6.7-mm7 doesn't work
2.6.7-mm7 (with bk-usb.patch reverted) works
2.6.8-rc2 doesn't work
2.6.8-rc2-mm2 doesn't work
2.6.8-rc2-mm2 (with bk-usb.patch reverted) doesn't work
I will test rc1 later tonight once I get off work and post the results.
As stated earlier machine hangs on Starting cups. If I disconnect all
USB devices it boots, but when I plug my keyboard in, nothing works
unless I hold down a key for a few seconds. Then the input is shown
on the machine but repeatedly, like I was holding the key. Example
I'll hold the "s" key and it appears after a few seconds, but like
"sssssssssssssssssssssssssss" if I hit backspace nothing, but if I
hold it, it will erase all the characters.
Please CC to linux-usb-devel as I am not subscribed.
On Wed, 4 Aug 2004 01:04:00 +0200, Luis Miguel García Mancebo
<ktech@wanadoo.es> wrote:
> El Martes, 3 de Agosto de 2004 15:57, Greg KH escribió:
> > On Tue, Aug 03, 2004 at 10:46:57AM +0200, Luis Miguel Garc?a Mancebo wrote:
> > > With 2.6.7-mm7 don't work either, but I can revert the bk-usb.patch in
> > > the andrew tree and all works ok. Even the camera:
> >
> > So 2.6.7 (with no patches) worked for you? Did 2.6.8-rc1 break? Or was
> > it 2.6.8-rc2 that broke your box?
> >
> > thanks,
> >
> > greg k-h
>
> I have been testing various kernels. Here's the restult:
>
> 2.6.7-mm7 DON'T WORK
> 2.6.7-mm7 (with bk-usb.patch reverted) WORKS
>
> 2.6.7-rc1 DON'T WORK
> 2.6.7-rc2 DON'T WORK
>
> So I think the problems started on vanilla in 2.6.8-rc1 but was already there
> in 2.6.7-mm7.
>
> Thanks a lot. Any patch do you want for me to test?
>
>
>
> --
> Luis Miguel García Mancebo
> Universidad de Deusto / Deusto University
> Spain
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-04 20:32 ` Michael Guterl
@ 2004-08-05 1:20 ` David Brownell
2004-08-05 3:57 ` Michael Guterl
2004-08-05 3:59 ` Michael Guterl
0 siblings, 2 replies; 24+ messages in thread
From: David Brownell @ 2004-08-05 1:20 UTC (permalink / raw)
To: linux-usb-devel
Cc: Michael Guterl, Luis Miguel Garc�a Mancebo, Greg KH, LKML,
akpm
On Wednesday 04 August 2004 13:32, Michael Guterl wrote:
> As stated earlier machine hangs on Starting cups.
The "usblp" driver hasn't changed recently.
> If I disconnect all
> USB devices it boots, but when I plug my keyboard in, nothing works
> unless I hold down a key for a few seconds.
One data point: rc3 worked just fine for me on one machine, OHCI
and EHCI under light testing (which included a keyboard).
Please be sure to provide full debug info with future reports,
including "lspci -vv" info, "dmesg" output showing usb init
and showing the failure, info about the USB devices you're
using, and "how I broke it" info. "alt-sysrq-t" traces are good
for kernel hangs...
There seem to be a bunch of reports floating around that
are basically "it doesn't work for me" ... and devoid of enough
info that anyone could actually track down the problem
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-05 1:20 ` [linux-usb-devel] " David Brownell
@ 2004-08-05 3:57 ` Michael Guterl
2004-08-05 15:34 ` David Brownell
2004-08-06 14:23 ` Alan Stern
2004-08-05 3:59 ` Michael Guterl
1 sibling, 2 replies; 24+ messages in thread
From: Michael Guterl @ 2004-08-05 3:57 UTC (permalink / raw)
To: David Brownell
Cc: linux-usb-devel, Luis Miguel Garcý Mancebo, Greg KH, LKML,
akpm
[-- Attachment #1: Type: text/plain, Size: 2321 bytes --]
Okay, due to my lack of detail from previous posts, I thought I'd
restate everything with a little more detail. Previously I was using
2.6.7-mm7 (bk-acpi.patch and bk-usb.patch were reversed), everything
worked fine. Upgraded to 2.6.8-rc2 and my machine would just stop at
starting cupsd. Previous to reversing bk-acpi.patch and bk-usb.patch,
2.6.7-mm7 showed the same behavior. I unplugged all my USB devices,
and booted, and 2.6.8-rc2 started fine. I plugged in the keyboard and
I tried to use the keyboard and the result was whichever key was
pressed, that character was repeated numerous times. No matter what I
could not get a single character to appear, the always appeared like
"sssssssssssssssssssssss". Went and grabbed an old PS/2 Keyboard, and
proceeded to gather the information David Brownell suggested.
Attached are my dmesg's from each kernel, each time I booted fully,
then plugged the USB keyboard in, and then the USB mouse. My kernel
config is also attached, along with the output of lspci -v, (David
Brownell mentioned "lspci -w" but this isn't a valid option, and I
assume he meant -v). Also thought it might be worth mentioning that
I'm using a Belkin USB Keyboard, and Logitech USB Mouse. It might
also be worth mentioning I don't have a USB printer at all, I use cups
for network printing.
On Wed, 4 Aug 2004 18:20:50 -0700, David Brownell <david-b@pacbell.net> wrote:
> On Wednesday 04 August 2004 13:32, Michael Guterl wrote:
>
> > As stated earlier machine hangs on Starting cups.
>
> The "usblp" driver hasn't changed recently.
>
>
> > If I disconnect all
> > USB devices it boots, but when I plug my keyboard in, nothing works
> > unless I hold down a key for a few seconds.
>
> One data point: rc3 worked just fine for me on one machine, OHCI
> and EHCI under light testing (which included a keyboard).
>
> Please be sure to provide full debug info with future reports,
> including "lspci -vv" info, "dmesg" output showing usb init
> and showing the failure, info about the USB devices you're
> using, and "how I broke it" info. "alt-sysrq-t" traces are good
> for kernel hangs...
>
> There seem to be a bunch of reports floating around that
> are basically "it doesn't work for me" ... and devoid of enough
> info that anyone could actually track down the problem
>
>
[-- Attachment #2: lspci --]
[-- Type: application/octet-stream, Size: 6046 bytes --]
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: bus master, 66Mhz, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable)
Capabilities: [40] AGP version 3.0
Capabilities: [60] #08 [2001]
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66Mhz, fast devsel
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66Mhz, fast devsel
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66Mhz, fast devsel
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66Mhz, fast devsel
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Flags: 66Mhz, fast devsel
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66Mhz, fast devsel, latency 0
Capabilities: [48] #08 [01e1]
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
Flags: 66Mhz, fast devsel, IRQ 5
I/O ports at e400
Capabilities: [44] Power Management version 2
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
Memory at ec087000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 12
Memory at ec082000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
Memory at ec083000 (32-bit, non-prefetchable)
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
Subsystem: Asustek Computer, Inc. A7N8X Mainboard onboard nForce2 Ethernet
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 12
Memory at ec086000 (32-bit, non-prefetchable)
I/O ports at d000 [size=8]
Capabilities: [44] Power Management version 2
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2)
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 12
Memory at ec000000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
Subsystem: Asustek Computer, Inc.: Unknown device 8095
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
I/O ports at d400
I/O ports at d800 [size=128]
Memory at ec080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: e0000000-e7ffffff
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
Flags: bus master, 66Mhz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
0000:00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ea000000-ebffffff
Expansion ROM at 0000c000 [disabled] [size=4K]
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 809a
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5
Memory at ec084000 (32-bit, non-prefetchable)
Memory at ec085000 (32-bit, non-prefetchable) [size=64]
Capabilities: [44] Power Management version 2
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 32
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
0000:01:07.0 VGA compatible controller: S3 Inc. 86c325 [ViRGE] (rev 06) (prog-if 00 [VGA])
Flags: medium devsel, IRQ 5
Memory at e0000000 (32-bit, non-prefetchable) [disabled]
0000:02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] (rev 40)
Subsystem: Asustek Computer, Inc. A7N8X Deluxe onboard 3C920B-EMB Integrated Fast Ethernet Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at c000
Memory at eb000000 (32-bit, non-prefetchable) [size=128]
Capabilities: [dc] Power Management version 2
0000:03:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA])
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
Memory at e8000000 (32-bit, non-prefetchable)
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
[-- Attachment #3: dmesg-2.6.7-mm7 --]
[-- Type: application/octet-stream, Size: 12279 bytes --]
Linux version 2.6.7-Redeeman13 (root@mars) (gcc version 3.4.1 (Gentoo Linux 3.4.1, ssp-3.4-2, pie-8.7.6.3)) #2 Sat Jul 10 20:22:47 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f75e0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff74c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Built 1 zonelists
Initializing CPU#0
Kernel command line: BOOT_IMAGE=Redeeman13 ro root=341 elevator=cfq
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1603.644 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 255056k/262080k available (2649k kernel code, 6332k reserved, 891k data, 140k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3170.30 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 1900+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [L3CM] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 5 (level, low) -> IRQ 5
vesafb: framebuffer at 0xd8000000, mapped to 0xd0880000, size 5120k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:f360
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
NTFS driver 2.1.16-WIP [Flags: R/O].
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Console: switching to colour frame buffer device 160x64
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 128M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using cfq io scheduler
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800JB-00ETA0, ATA DISK drive
hdb: WDC WD800JB-00ETA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdb: max request size: 1024KiB
hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 11, pci mem d080e000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 11, pci mem d0810000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 12 (level, low) -> IRQ 12
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 12, pci mem d0812000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.5 (Sun May 30 10:49:40 2004 UTC).
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49426 usecs
intel8x0: clocking to 47449
ALSA device list:
#0: NVidia nForce2 at 0xec080000, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (reiser4 filesystem) readonly.
Freeing unused kernel memory: 140k freed
Adding 747012k swap on /dev/hda2. Priority:-1 extents:1
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:01.0: 3Com PCI 3c920 Tornado at 0xc000. Vers LK1.1.19
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 5 (level, low) -> IRQ 5
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6106 Wed Jun 23 08:14:01 PDT 2004
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-3: new low speed USB device using address 2
usb 2-3: control timeout on ep0in
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: timeout initializing reports
input: USB HID v1.10 Keyboard [ABBAHOME USB Keyboar?] on usb-0000:00:02.0-3
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: timeout initializing reports
input: USB HID v1.10 Device [ABBAHOME USB Keyboar?] on usb-0000:00:02.0-3
usb 3-2: new low speed USB device using address 2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-2
[-- Attachment #4: dmesg-2.6.8-rc2 --]
[-- Type: application/octet-stream, Size: 11814 bytes --]
Linux version 2.6.8-rc2 (root@mars) (gcc version 3.4.1 20040803 (Gentoo Linux 3.4.1-r2, ssp-3.4-2, pie-8.7.6.5)) #2 Wed Aug 4 23:12:08 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f75e0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff74c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Built 1 zonelists
Kernel command line: BOOT_IMAGE=2.6.8-rc2 ro root=341 elevator=cfq
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1603.658 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 255088k/262080k available (2616k kernel code, 6300k reserved, 887k data, 140k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3170.30 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 1900+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [L3CM] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 5 (level, low) -> IRQ 5
vesafb: framebuffer at 0xd8000000, mapped to 0xd0808000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:f360
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
NTFS driver 2.1.15 [Flags: R/O].
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Console: switching to colour frame buffer device 128x48
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 128M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using cfq io scheduler
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800JB-00ETA0, ATA DISK drive
hdb: WDC WD800JB-00ETA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: hda1 hda2 hda3 hda4
hdb: max request size: 1024KiB
hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: hdb1
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 11, pci mem d0b51000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 11, pci mem d0b53000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 12 (level, low) -> IRQ 12
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 12, pci mem d0b55000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49428 usecs
intel8x0: clocking to 47451
ALSA device list:
#0: NVidia nForce2 at 0xec080000, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (reiser4 filesystem) readonly.
Freeing unused kernel memory: 140k freed
Adding 747012k swap on /dev/hda2. Priority:-1 extents:1
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:01.0: 3Com PCI 3c920 Tornado at 0xc000. Vers LK1.1.19
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-3: new low speed USB device using address 2
usb 2-3: control timeout on ep0in
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: timeout initializing reports
input: USB HID v1.10 Keyboard [ABBAHOME USB Keyboar?] on usb-0000:00:02.0-3
usb 2-3: control timeout on ep0in
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
usb 2-3: control timeout on ep0in
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-05 1:20 ` [linux-usb-devel] " David Brownell
2004-08-05 3:57 ` Michael Guterl
@ 2004-08-05 3:59 ` Michael Guterl
1 sibling, 0 replies; 24+ messages in thread
From: Michael Guterl @ 2004-08-05 3:59 UTC (permalink / raw)
To: David Brownell
Cc: linux-usb-devel, Luis Miguel Garcý Mancebo, Greg KH, LKML,
akpm
[-- Attachment #1: Type: text/plain, Size: 1041 bytes --]
Ooops I forgot to attach my .config as well.
On Wed, 4 Aug 2004 18:20:50 -0700, David Brownell <david-b@pacbell.net> wrote:
> On Wednesday 04 August 2004 13:32, Michael Guterl wrote:
>
> > As stated earlier machine hangs on Starting cups.
>
> The "usblp" driver hasn't changed recently.
>
>
> > If I disconnect all
> > USB devices it boots, but when I plug my keyboard in, nothing works
> > unless I hold down a key for a few seconds.
>
> One data point: rc3 worked just fine for me on one machine, OHCI
> and EHCI under light testing (which included a keyboard).
>
> Please be sure to provide full debug info with future reports,
> including "lspci -vv" info, "dmesg" output showing usb init
> and showing the failure, info about the USB devices you're
> using, and "how I broke it" info. "alt-sysrq-t" traces are good
> for kernel hangs...
>
> There seem to be a bunch of reports floating around that
> are basically "it doesn't work for me" ... and devoid of enough
> info that anyone could actually track down the problem
>
>
[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 24119 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_UHCI_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
CONFIG_REISER4_LARGE_KEY=y
# CONFIG_REISER4_CHECK is not set
CONFIG_REISER4_USE_EFLUSH=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-05 3:57 ` Michael Guterl
@ 2004-08-05 15:34 ` David Brownell
2004-08-05 17:05 ` Michael Guterl
2004-08-05 18:08 ` Kevin O'Shea
2004-08-06 14:23 ` Alan Stern
1 sibling, 2 replies; 24+ messages in thread
From: David Brownell @ 2004-08-05 15:34 UTC (permalink / raw)
To: Michael Guterl
Cc: linux-usb-devel, Luis Miguel Garc� Mancebo, Greg KH, LKML,
akpm
On Wednesday 04 August 2004 20:57, Michael Guterl wrote:
> Attached are my dmesg's from each kernel, each time I booted fully,
> then plugged the USB keyboard in, and then the USB mouse. My kernel
> config is also attached, along with the output of lspci -v, (David
> Brownell mentioned "lspci -w" but this isn't a valid option, and I
Actually that was "-vv" (two v's, not double-v), but don't bother.
The dmesg output shows this is a HID failure. It's likely connected
with some changes in the unlink logic, since that's what returns
the "-ENOENT" status. The usb_kill_urb() changes added a new
URB state as I recall, maybe that's part of the issue here... since
that routine replaced the previous "synchronous unlink" logic.
- Dave
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-05 15:34 ` David Brownell
@ 2004-08-05 17:05 ` Michael Guterl
2004-08-07 17:51 ` David Brownell
2004-08-05 18:08 ` Kevin O'Shea
1 sibling, 1 reply; 24+ messages in thread
From: Michael Guterl @ 2004-08-05 17:05 UTC (permalink / raw)
To: David Brownell
Cc: linux-usb-devel, Luis Miguel Garcý Mancebo, Greg KH, LKML,
akpm
Thanks for the reply David, but where exactly does this leave me and
the others experiencing this problem? Is there any more information I
can provide that might help? Any possible solutions, patches, etc?
On Thu, 5 Aug 2004 08:34:27 -0700, David Brownell <david-b@pacbell.net> wrote:
> On Wednesday 04 August 2004 20:57, Michael Guterl wrote:
>
> > Attached are my dmesg's from each kernel, each time I booted fully,
> > then plugged the USB keyboard in, and then the USB mouse. My kernel
> > config is also attached, along with the output of lspci -v, (David
> > Brownell mentioned "lspci -w" but this isn't a valid option, and I
>
> Actually that was "-vv" (two v's, not double-v), but don't bother.
>
> The dmesg output shows this is a HID failure. It's likely connected
> with some changes in the unlink logic, since that's what returns
> the "-ENOENT" status. The usb_kill_urb() changes added a new
> URB state as I recall, maybe that's part of the issue here... since
> that routine replaced the previous "synchronous unlink" logic.
>
> - Dave
>
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-05 15:34 ` David Brownell
2004-08-05 17:05 ` Michael Guterl
@ 2004-08-05 18:08 ` Kevin O'Shea
2004-08-05 18:50 ` Michael Guterl
1 sibling, 1 reply; 24+ messages in thread
From: Kevin O'Shea @ 2004-08-05 18:08 UTC (permalink / raw)
To: David Brownell
Cc: Michael Guterl, linux-usb-devel, Luis Miguel Garcý Mancebo,
Greg KH, LKML, akpm
Just thought you guys would like to know I had this same problem since
2.6.7-mm6, but it is now fixed for me in 2.6.8-rc3-mm1.
I have an intel 865PE chipset.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-05 18:08 ` Kevin O'Shea
@ 2004-08-05 18:50 ` Michael Guterl
0 siblings, 0 replies; 24+ messages in thread
From: Michael Guterl @ 2004-08-05 18:50 UTC (permalink / raw)
To: Kevin O'Shea
Cc: David Brownell, linux-usb-devel, Luis Miguel Garcý Mancebo,
Greg KH, LKML, akpm
Thanks for the info Kevin, but the issue still persists for me in 2.6.8-rc3-mm1.
On Thu, 5 Aug 2004 11:08:18 -0700, Kevin O'Shea <mastergoon@gmail.com> wrote:
> Just thought you guys would like to know I had this same problem since
> 2.6.7-mm6, but it is now fixed for me in 2.6.8-rc3-mm1.
>
> I have an intel 865PE chipset.
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-05 3:57 ` Michael Guterl
2004-08-05 15:34 ` David Brownell
@ 2004-08-06 14:23 ` Alan Stern
1 sibling, 0 replies; 24+ messages in thread
From: Alan Stern @ 2004-08-06 14:23 UTC (permalink / raw)
To: Michael Guterl
Cc: David Brownell, linux-usb-devel, Luis Miguel Garcý Mancebo,
Greg KH, LKML, akpm
On Wed, 4 Aug 2004, Michael Guterl wrote:
> Okay, due to my lack of detail from previous posts, I thought I'd
> restate everything with a little more detail. Previously I was using
> 2.6.7-mm7 (bk-acpi.patch and bk-usb.patch were reversed), everything
> worked fine. Upgraded to 2.6.8-rc2 and my machine would just stop at
> starting cupsd. Previous to reversing bk-acpi.patch and bk-usb.patch,
> 2.6.7-mm7 showed the same behavior. I unplugged all my USB devices,
> and booted, and 2.6.8-rc2 started fine. I plugged in the keyboard and
> I tried to use the keyboard and the result was whichever key was
> pressed, that character was repeated numerous times. No matter what I
> could not get a single character to appear, the always appeared like
> "sssssssssssssssssssssss". Went and grabbed an old PS/2 Keyboard, and
> proceeded to gather the information David Brownell suggested.
To me this suggests you may be seeing a problem with ACPI, not USB.
That's the only way to explain why starting cupsd could lead to problems.
For more information, you could try turning on the USB debugging option in
your kernel's configuration.
Alan Stern
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-05 17:05 ` Michael Guterl
@ 2004-08-07 17:51 ` David Brownell
2004-08-07 22:01 ` Wes Janzen
2004-08-08 3:19 ` Michael Guterl
0 siblings, 2 replies; 24+ messages in thread
From: David Brownell @ 2004-08-07 17:51 UTC (permalink / raw)
To: Michael Guterl
Cc: linux-usb-devel, Luis Miguel Garc� Mancebo, Greg KH, LKML,
akpm
On Thursday 05 August 2004 10:05, Michael Guterl wrote:
> Thanks for the reply David, but where exactly does this leave me and
> the others experiencing this problem? Is there any more information I
> can provide that might help? Any possible solutions, patches, etc?
It leaves you (and others) with the problem partially isolated, so that
someone with time to track it down will have that much less work to do.
The most effective solutions involve someone who has the problem
actually stepping up and debugging the whole thing, then providing
a patch fixing the problem.
A second-best would be collaboration between someone who has
the time (not me!) and someone who has the problem (you?) to
remotely debug the problem.
A third-best would be for someone (you?) to find out exactly which patch
caused the problem -- a binary search of the USB patches, luckily it's
made easier by the fact that it could only be a change in HID, usbcore,
or some HCD. (And most likely IMO it's usbcore.) Then that patch can
either be further debugged, or reverted.
- Dave
> On Thu, 5 Aug 2004 08:34:27 -0700, David Brownell <david-b@pacbell.net>
wrote:
> > ....
> >
> > The dmesg output shows this is a HID failure. It's likely connected
> > with some changes in the unlink logic, since that's what returns
> > the "-ENOENT" status. The usb_kill_urb() changes added a new
> > URB state as I recall, maybe that's part of the issue here... since
> > that routine replaced the previous "synchronous unlink" logic.
> >
> > - Dave
> >
> >
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-07 17:51 ` David Brownell
@ 2004-08-07 22:01 ` Wes Janzen
2004-08-08 3:19 ` Michael Guterl
1 sibling, 0 replies; 24+ messages in thread
From: Wes Janzen @ 2004-08-07 22:01 UTC (permalink / raw)
To: David Brownell
Cc: Michael Guterl, linux-usb-devel, Luis Miguel Garc Mancebo,
Greg KH, LKML, akpm
[-- Attachment #1: Type: text/plain, Size: 1465 bytes --]
David Brownell wrote:
>On Thursday 05 August 2004 10:05, Michael Guterl wrote:
>
>
>>Thanks for the reply David, but where exactly does this leave me and
>>the others experiencing this problem? Is there any more information I
>>can provide that might help? Any possible solutions, patches, etc?
>>
>>
>
>It leaves you (and others) with the problem partially isolated, so that
>someone with time to track it down will have that much less work to do.
>[...]
>A third-best would be for someone (you?) to find out exactly which patch
>caused the problem -- a binary search of the USB patches, luckily it's
>made easier by the fact that it could only be a change in HID, usbcore,
>or some HCD. (And most likely IMO it's usbcore.) Then that patch can
>either be further debugged, or reverted.
>
>- Dave
>
>
>
OK, I'm willing since I'm stuck with 2.6.7-ck5 which eventually bugs due
to some USB problems. I'm not a developer so I need a little help
learning how to get the USB patches added somewhere in between 2.6.7 and
2.6.7-mm2/2.6.8-rc1. I'm kinda busy right now so maybe I didn't search
the kernel.org website well enough, but I've reached the conclusion I'll
need to use bk or the cvs interface. So if someone can give me a quick
and dirty tutorial or point me to where I can read up on this (or just
give me some google search terms) I'd be willing to apply patches until
it breaks and try to figure out what's going wrong.
Thanks,
Wes
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-07 17:51 ` David Brownell
2004-08-07 22:01 ` Wes Janzen
@ 2004-08-08 3:19 ` Michael Guterl
2004-08-08 4:20 ` Alan Stern
1 sibling, 1 reply; 24+ messages in thread
From: Michael Guterl @ 2004-08-08 3:19 UTC (permalink / raw)
To: David Brownell
Cc: linux-usb-devel, Luis Miguel Garcý Mancebo, Greg KH, LKML,
akpm
What if Alan's assumptions that it is in ACPI and not USB are correct?
Personally I don't know enough to handle really any of the tasks you
suggested. I figured the fact that reverting bk-acpi.patch and
bk-usb.patch would throw up some kind of red flag, that something in
there was maybe messed up and merged in.
On Sat, 7 Aug 2004 10:51:23 -0700, David Brownell <david-b@pacbell.net> wrote:
> On Thursday 05 August 2004 10:05, Michael Guterl wrote:
> > Thanks for the reply David, but where exactly does this leave me and
> > the others experiencing this problem? Is there any more information I
> > can provide that might help? Any possible solutions, patches, etc?
>
> It leaves you (and others) with the problem partially isolated, so that
> someone with time to track it down will have that much less work to do.
>
> The most effective solutions involve someone who has the problem
> actually stepping up and debugging the whole thing, then providing
> a patch fixing the problem.
>
> A second-best would be collaboration between someone who has
> the time (not me!) and someone who has the problem (you?) to
> remotely debug the problem.
>
> A third-best would be for someone (you?) to find out exactly which patch
> caused the problem -- a binary search of the USB patches, luckily it's
> made easier by the fact that it could only be a change in HID, usbcore,
> or some HCD. (And most likely IMO it's usbcore.) Then that patch can
> either be further debugged, or reverted.
>
> - Dave
>
>
> > On Thu, 5 Aug 2004 08:34:27 -0700, David Brownell <david-b@pacbell.net>
> wrote:
> > > ....
>
>
> > >
> > > The dmesg output shows this is a HID failure. It's likely connected
> > > with some changes in the unlink logic, since that's what returns
> > > the "-ENOENT" status. The usb_kill_urb() changes added a new
> > > URB state as I recall, maybe that's part of the issue here... since
> > > that routine replaced the previous "synchronous unlink" logic.
> > >
> > > - Dave
> > >
> > >
> >
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-08 3:19 ` Michael Guterl
@ 2004-08-08 4:20 ` Alan Stern
2004-08-08 13:29 ` Michael Guterl
0 siblings, 1 reply; 24+ messages in thread
From: Alan Stern @ 2004-08-08 4:20 UTC (permalink / raw)
To: Michael Guterl
Cc: David Brownell, linux-usb-devel, Luis Miguel Garcý Mancebo,
Greg KH, LKML, akpm
On Sat, 7 Aug 2004, Michael Guterl wrote:
> What if Alan's assumptions that it is in ACPI and not USB are correct?
> Personally I don't know enough to handle really any of the tasks you
> suggested. I figured the fact that reverting bk-acpi.patch and
> bk-usb.patch would throw up some kind of red flag, that something in
> there was maybe messed up and merged in.
It was a guess, not an assumption!
You could test this guess by reverting bk-usb.patch while leaving
bk-acpi.patch intact.
Alan Stern
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-08 4:20 ` Alan Stern
@ 2004-08-08 13:29 ` Michael Guterl
2004-08-10 17:16 ` Michael Guterl
0 siblings, 1 reply; 24+ messages in thread
From: Michael Guterl @ 2004-08-08 13:29 UTC (permalink / raw)
To: Alan Stern
Cc: David Brownell, linux-usb-devel, Luis Miguel Garcý Mancebo,
Greg KH, LKML, akpm
Yeah I have to work today, Sunday!?!? After I get off if I have time
I'll start messing with the bk-usb and bk-acpi patches.
On Sun, 8 Aug 2004 00:20:43 -0400 (EDT), Alan Stern
<stern@rowland.harvard.edu> wrote:
> On Sat, 7 Aug 2004, Michael Guterl wrote:
>
> > What if Alan's assumptions that it is in ACPI and not USB are correct?
> > Personally I don't know enough to handle really any of the tasks you
> > suggested. I figured the fact that reverting bk-acpi.patch and
> > bk-usb.patch would throw up some kind of red flag, that something in
> > there was maybe messed up and merged in.
>
> It was a guess, not an assumption!
>
> You could test this guess by reverting bk-usb.patch while leaving
> bk-acpi.patch intact.
>
> Alan Stern
>
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-08 13:29 ` Michael Guterl
@ 2004-08-10 17:16 ` Michael Guterl
2004-08-10 18:54 ` Alan Stern
0 siblings, 1 reply; 24+ messages in thread
From: Michael Guterl @ 2004-08-10 17:16 UTC (permalink / raw)
To: Alan Stern
Cc: David Brownell, linux-usb-devel, Luis Miguel Garcý Mancebo,
Greg KH, LKML, akpm
[-- Attachment #1: Type: text/plain, Size: 5518 bytes --]
Okay some new information regarding this problem. It seems that USB
is not entirely broken, because I can use my USB mouse in X while
using a PS/2 keyboard.
I turned USB and ACPI debugging on in the kernel. I am recreating
this problem by booting the machine with no USB devices plugged in,
then plugging the keyboard in, and then unplugging the keyboard. I am
recreating the problem with 2.6.8-rc3-mm1, but any 2.6.8-rc* kernel
seems to reproduce the same errors, and yes I have tried 2.6.8-rc4 as
well.
When I plug the USB keyboard in here is what dmesg shows.
ehci_hcd 0000:00:02.2: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 3 low speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 3 status 003402 POWER OWNER sig=k CSC
ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [0] = 0x00010301
CSC LSDA PPS CCS
hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [0] = 0x00100303
PRSC LSDA PPS PES CCS
usb 3-1: new low speed USB device using address 2
usb 3-1: skipped 1 descriptor after interface
usb 3-1: skipped 1 descriptor after interface
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: default language 0x0409
usb 3-1: Product: USB Keyboar?
usb 3-1: Manufacturer: ABBAHOME
usb 3-1: hotplug
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: hotplug
usbhid 3-1:1.0: usb_probe_interface
usbhid 3-1:1.0: usb_probe_interface - got id
usb 3-1: control timeout on ep0in
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: timeout initializing reports
input: USB HID v1.10 Keyboard [ABBAHOME USB Keyboar?] on usb-0000:00:02.1-1
usb 3-1: adding 3-1:1.1 (config #1, interface 1)
usb 3-1:1.1: hotplug
usbhid 3-1:1.1: usb_probe_interface
usbhid 3-1:1.1: usb_probe_interface - got id
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
When I unplug the keyboard this is what is shown, and the latter
portion is repeated over and over again.
:00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
ohci_hcd 0000:00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
ohci_hcd 0000:00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
ohci_hcd 0000:00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
However, when I plug in my USB mouse and then unplug it, with the same
kernel here is what is shown from dmesg.
ehci_hcd 0000:00:02.2: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 3 low speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 3 status 003402 POWER OWNER sig=k CSC
ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [0] = 0x00010301
CSC LSDA PPS CCS
hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [0] = 0x00100303
PRSC LSDA PPS PES CCS
usb 3-1: new low speed USB device using address 2
usb 3-1: skipped 1 descriptor after interface
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: default language 0x0409
usb 3-1: Product: USB-PS/2 Optical Mouse
usb 3-1: Manufacturer: Logitech
usb 3-1: hotplug
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: hotplug
usbhid 3-1:1.0: usb_probe_interface
usbhid 3-1:1.0: usb_probe_interface - got id
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:02.1-1
ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [0] = 0x00030300
PESC CSC LSDA PPS
hub 3-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s
usb 3-1: USB disconnect, address 2
usb 3-1: usb_disable_device nuking all URBs
usb 3-1: unregistering interface 3-1:1.0
usb 3-1:1.0: hotplug
usb 3-1: unregistering device
usb 3-1: hotplug
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300
ehci_hcd 0000:00:02.2: GetStatus port 3 status 001002 POWER sig=se0 CSC
hub 1-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
I have attached the entire dmesg output from 2.6.8-rc3-mm1 prior to
plugging in any USB devices as well. If anyone wants to see the dmesg
output from my last working config I can post that as well.
On Sun, 8 Aug 2004 09:29:02 -0400, Michael Guterl <mguterl@gmail.com> wrote:
> Yeah I have to work today, Sunday!?!? After I get off if I have time
> I'll start messing with the bk-usb and bk-acpi patches.
>
>
>
> On Sun, 8 Aug 2004 00:20:43 -0400 (EDT), Alan Stern
> <stern@rowland.harvard.edu> wrote:
> > On Sat, 7 Aug 2004, Michael Guterl wrote:
> >
> > > What if Alan's assumptions that it is in ACPI and not USB are correct?
> > > Personally I don't know enough to handle really any of the tasks you
> > > suggested. I figured the fact that reverting bk-acpi.patch and
> > > bk-usb.patch would throw up some kind of red flag, that something in
> > > there was maybe messed up and merged in.
> >
> > It was a guess, not an assumption!
> >
> > You could test this guess by reverting bk-usb.patch while leaving
> > bk-acpi.patch intact.
> >
> > Alan Stern
> >
> >
>
[-- Attachment #2: dmesg-2.6.8-rc3-mm1 --]
[-- Type: application/octet-stream, Size: 15505 bytes --]
L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 1900+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:....................................................................................................................................................................................................................................................................
Table [DSDT](id F004) - 701 Objects with 75 Devices 260 Methods 27 Regions
ACPI Namespace successfully loaded at root c04d9d3c
ACPI: IRQ9 SCI: Edge set to Level Trigger.
evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
evgpeblk-0867 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000004020 on int 9
evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 9 Runtime GPEs in this block
evgpeblk-0867 [06] ev_create_gpe_block : GPE 32 to 95 [_GPE] 8 regs at 00000000000044A0 on int 9
evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:................................................................................
Initialized 27/27 Regions 1/1 Fields 28/28 Buffers 24/24 Packages (710 nodes)
Executing all Device _STA and_INI methods:.............................................................................
77 Devices found containing: 77 _STA, 1 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [L3CM] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 5 (level, low) -> IRQ 5
vesafb: framebuffer at 0xd8000000, mapped to 0xd0880000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:f360
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
NTFS driver 2.1.17-WIP [Flags: R/O].
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Console: switching to colour frame buffer device 128x48
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 128M @ 0xd0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using cfq io scheduler
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800JB-00ETA0, ATA DISK drive
hdb: WDC WD800JB-00ETA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: WDC WD200BB-75CLB0, ATA DISK drive
hdd: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdb: max request size: 1024KiB
hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1
hdc: max request size: 128KiB
hdc: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(33)
hdc: cache flushes not supported
hdc: hdc1
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
ehci_hcd 0000:00:02.2: reset hcs_params 0x102486 dbg=1 cc=2 pcc=4 !ppc ports=6
ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0
ehci_hcd 0000:00:02.2: reset hcc_params a086 caching frame 256/512/1024 park
ehci_hcd 0000:00:02.2: capability 0001 at a0
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 11, pci mem d080e000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: init command 010b09 park=3 ithresh=1 period=256 RUN
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
ehci_hcd 0000:00:02.2: supports USB remote wakeup
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: default language 0x0409
usb usb1: Product: nVidia Corporation nForce2 USB Controller
usb usb1: Manufacturer: Linux 2.6.8-rc3-mm1 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.2
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: ganged power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
ohci_hcd 0000:00:02.0: USB HC TakeOver from BIOS/SMM
ohci_hcd 0000:00:02.0: reset, control = 0x604
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 11, pci mem d0810000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: supports USB remote wakeup
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: default language 0x0409
usb usb2: Product: nVidia Corporation nForce2 USB Controller
usb usb2: Manufacturer: Linux 2.6.8-rc3-mm1 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: hotplug
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
ohci_hcd 0000:00:02.0: created debug files
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 1.0, with legacy support registers
ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.0: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:00:02.0: hcca frame #0011
ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=1 NPS NDP=3
ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 12 (level, low) -> IRQ 12
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
ohci_hcd 0000:00:02.1: USB HC TakeOver from BIOS/SMM
ohci_hcd 0000:00:02.1: reset, control = 0x604
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 12, pci mem d0812000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: supports USB remote wakeup
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: default language 0x0409
usb usb3: Product: nVidia Corporation nForce2 USB Controller (#2)
usb usb3: Manufacturer: Linux 2.6.8-rc3-mm1 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
usb usb3: hotplug
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: global over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
ohci_hcd 0000:00:02.1: created debug files
ohci_hcd 0000:00:02.1: OHCI controller state
ohci_hcd 0000:00:02.1: OHCI 1.0, with legacy support registers
ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.1: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:00:02.1: hcca frame #0011
ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=1 NPS NDP=3
ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.5 (Sun May 30 10:49:40 2004 UTC).
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49434 usecs
intel8x0: clocking to 47457
ALSA device list:
#0: NVidia nForce2 at 0xec080000, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (reiser4 filesystem) readonly.
Freeing unused kernel memory: 140k freed
Adding 747012k swap on /dev/hda2. Priority:-1 extents:1
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:01.0: 3Com PCI 3c920 Tornado at 0xc000. Vers LK1.1.19
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 5 (level, low) -> IRQ 5
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-10 17:16 ` Michael Guterl
@ 2004-08-10 18:54 ` Alan Stern
2004-08-10 19:41 ` Michael Guterl
0 siblings, 1 reply; 24+ messages in thread
From: Alan Stern @ 2004-08-10 18:54 UTC (permalink / raw)
To: Michael Guterl
Cc: David Brownell, linux-usb-devel, Luis Miguel Garcý Mancebo,
Greg KH, LKML, akpm
On Tue, 10 Aug 2004, Michael Guterl wrote:
> I turned USB and ACPI debugging on in the kernel. I am recreating
> this problem by booting the machine with no USB devices plugged in,
> then plugging the keyboard in, and then unplugging the keyboard. I am
> recreating the problem with 2.6.8-rc3-mm1, but any 2.6.8-rc* kernel
> seems to reproduce the same errors, and yes I have tried 2.6.8-rc4 as
> well.
>
> When I plug the USB keyboard in here is what dmesg shows.
<...>
> usb 3-1: control timeout on ep0in
> drivers/usb/input/hid-core.c: ctrl urb status -2 received
> drivers/usb/input/hid-core.c: timeout initializing reports
>
> input: USB HID v1.10 Keyboard [ABBAHOME USB Keyboar?] on usb-0000:00:02.1-1
> usb 3-1: adding 3-1:1.1 (config #1, interface 1)
> usb 3-1:1.1: hotplug
> usbhid 3-1:1.1: usb_probe_interface
> usbhid 3-1:1.1: usb_probe_interface - got id
> drivers/usb/input/hid-core.c: ctrl urb status -2 received
> drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
>
> When I unplug the keyboard this is what is shown, and the latter
> portion is repeated over and over again.
>
> :00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
> ohci_hcd 0000:00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
> ohci_hcd 0000:00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
> ohci_hcd 0000:00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
This is very strange. You might get a little more helpful information if
you edit drivers/usb/input/hid-core.c and replace the line that says
"#undef DEBUG" with "#define DEBUG".
Alan Stern
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [linux-usb-devel] Re: USB troubles in rc2
2004-08-10 18:54 ` Alan Stern
@ 2004-08-10 19:41 ` Michael Guterl
0 siblings, 0 replies; 24+ messages in thread
From: Michael Guterl @ 2004-08-10 19:41 UTC (permalink / raw)
To: Alan Stern
Cc: David Brownell, linux-usb-devel, Luis Miguel Garcý Mancebo,
Greg KH, LKML, akpm
[-- Attachment #1: Type: text/plain, Size: 2015 bytes --]
Okay I changed #undef DEBUG to #define DEBUG
attached are two files, the first being the complete dmesg during
boot, and the keyboard plugged in after booting completed, the second
file contains what happens when the keyboard is unplugged.
On Tue, 10 Aug 2004 14:54:25 -0400 (EDT), Alan Stern
<stern@rowland.harvard.edu> wrote:
> On Tue, 10 Aug 2004, Michael Guterl wrote:
>
> > I turned USB and ACPI debugging on in the kernel. I am recreating
> > this problem by booting the machine with no USB devices plugged in,
> > then plugging the keyboard in, and then unplugging the keyboard. I am
> > recreating the problem with 2.6.8-rc3-mm1, but any 2.6.8-rc* kernel
> > seems to reproduce the same errors, and yes I have tried 2.6.8-rc4 as
> > well.
> >
> > When I plug the USB keyboard in here is what dmesg shows.
> <...>
> > usb 3-1: control timeout on ep0in
> > drivers/usb/input/hid-core.c: ctrl urb status -2 received
> > drivers/usb/input/hid-core.c: timeout initializing reports
> >
> > input: USB HID v1.10 Keyboard [ABBAHOME USB Keyboar?] on usb-0000:00:02.1-1
> > usb 3-1: adding 3-1:1.1 (config #1, interface 1)
> > usb 3-1:1.1: hotplug
> > usbhid 3-1:1.1: usb_probe_interface
> > usbhid 3-1:1.1: usb_probe_interface - got id
> > drivers/usb/input/hid-core.c: ctrl urb status -2 received
> > drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
> >
> > When I unplug the keyboard this is what is shown, and the latter
> > portion is repeated over and over again.
> >
> > :00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
> > ohci_hcd 0000:00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
> > ohci_hcd 0000:00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
> > ohci_hcd 0000:00:02.1: urb c134c460 path 1 ep1in 5f160000 cc 5 --> status -110
>
> This is very strange. You might get a little more helpful information if
> you edit drivers/usb/input/hid-core.c and replace the line that says
> "#undef DEBUG" with "#define DEBUG".
>
> Alan Stern
>
>
[-- Attachment #2: dmesg-2.6.8-rc3-mm1-keyboard --]
[-- Type: application/octet-stream, Size: 14974 bytes --]
lock sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
ohci_hcd 0000:00:02.0: USB HC TakeOver from BIOS/SMM
ohci_hcd 0000:00:02.0: reset, control = 0x604
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 11, pci mem d0810000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: supports USB remote wakeup
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: default language 0x0409
usb usb2: Product: nVidia Corporation nForce2 USB Controller
usb usb2: Manufacturer: Linux 2.6.8-rc3-mm1 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: hotplug
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
ohci_hcd 0000:00:02.0: created debug files
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 1.0, with legacy support registers
ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.0: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:00:02.0: hcca frame #0011
ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=1 NPS NDP=3
ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 12 (level, low) -> IRQ 12
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
ohci_hcd 0000:00:02.1: USB HC TakeOver from BIOS/SMM
ohci_hcd 0000:00:02.1: reset, control = 0x604
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 12, pci mem d0812000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: supports USB remote wakeup
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: default language 0x0409
usb usb3: Product: nVidia Corporation nForce2 USB Controller (#2)
usb usb3: Manufacturer: Linux 2.6.8-rc3-mm1 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
usb usb3: hotplug
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: global over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
ohci_hcd 0000:00:02.1: created debug files
ohci_hcd 0000:00:02.1: OHCI controller state
ohci_hcd 0000:00:02.1: OHCI 1.0, with legacy support registers
ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:02.1: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:00:02.1: hcca frame #0011
ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=1 NPS NDP=3
ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.5 (Sun May 30 10:49:40 2004 UTC).
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49434 usecs
intel8x0: clocking to 47457
ALSA device list:
#0: NVidia nForce2 at 0xec080000, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (reiser4 filesystem) readonly.
Freeing unused kernel memory: 140k freed
Adding 747012k swap on /dev/hda2. Priority:-1 extents:1
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:01.0: 3Com PCI 3c920 Tornado at 0xc000. Vers LK1.1.19
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 5 (level, low) -> IRQ 5
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ehci_hcd 0000:00:02.2: GetStatus port 3 status 001002 POWER sig=se0 CSC
hub 1-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
ehci_hcd 0000:00:02.2: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 3 low speed --> companion
ehci_hcd 0000:00:02.2: GetStatus port 3 status 003402 POWER OWNER sig=k CSC
ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-1: new low speed USB device using address 2
usb 3-1: skipped 1 descriptor after interface
usb 3-1: skipped 1 descriptor after interface
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: default language 0x0409
usb 3-1: Product: USB Keyboar?
usb 3-1: Manufacturer: ABBAHOME
usb 3-1: hotplug
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: hotplug
usbhid 3-1:1.0: usb_probe_interface
usbhid 3-1:1.0: usb_probe_interface - got id
drivers/usb/input/hid-core.c: HID probe called for ifnum 0
drivers/usb/input/hid-core.c: submitting ctrl urb: Get_Report wValue=0x0100 wIndex=0x0000 wLength=8
usb 3-1: control timeout on ep0in
drivers/usb/input/hid-core.c: timeout waiting for ctrl or out queue to clear
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: empty report
drivers/usb/input/hid-core.c: timeout initializing reports
INPUT[INPUT]
Field(0)
Usage(8)
Keyboard.00e0
Keyboard.00e1
Keyboard.00e2
Keyboard.00e3
Keyboard.00e4
Keyboard.00e5
Keyboard.00e6
Keyboard.00e7
Logical Minimum(0)
Logical Maximum(1)
Report Size(1)
Report Count(8)
Report Offset(0)
Flags( Variable Absolute )
Field(1)
Usage(1)
Undefined.GenericDesktop
Logical Minimum(0)
Logical Maximum(1)
Report Size(8)
Report Count(1)
Report Offset(8)
Flags( Constant Array Absolute )
Field(2)
Usage(256)
Keyboard.LED
Keyboard.0001
Keyboard.0002
Keyboard.0003
Keyboard.0004
Keyboard.0005
Keyboard.0006
Keyboard.0007
Keyboard.0008
Keyboard.0009
Keyboard.000a
Keyboard.000b
Keyboard.000c
Keyboard.000d
Keyboard.000e
Keyboard.000f
Keyboard.0010
Keyboard.0011
Keyboard.0012
Keyboard.0013
Keyboard.0014
Keyboard.0015
Keyboard.0016
Keyboard.0017
Keyboard.0018
Keyboard.0019
Keyboard.001a
Keyboard.001b
Keyboard.001c
Keyboard.001d
Keyboard.001e
Keyboard.001f
Keyboard.0020
Keyboard.0021
Keyboard.0022
Keyboard.0023
Keyboard.0024
Keyboard.0025
Keyboard.0026
Keyboard.0027
Keyboard.0028
Keyboard.0029
Keyboard.002a
Keyboard.002b
Keyboard.002c
Keyboard.002d
Keyboard.002e
Keyboard.002f
Keyboard.0030
Keyboard.0031
Keyboard.0032
Keyboard.0033
Keyboard.0034
Keyboard.0035
Keyboard.0036
Keyboard.0037
Keyboard.0038
Keyboard.0039
Keyboard.003a
Keyboard.003b
Keyboard.003c
Keyboard.003d
Keyboard.003e
Keyboard.003f
Keyboard.0040
Keyboard.0041
Keyboard.0042
Keyboard.0043
Keyboard.0044
Keyboard.0045
Keyboard.0046
Keyboard.0047
Keyboard.0048
Keyboard.0049
Keyboard.004a
Keyboard.004b
Keyboard.004c
Keyboard.004d
Keyboard.004e
Keyboard.004f
Keyboard.0050
Keyboard.0051
Keyboard.0052
Keyboard.0053
Keyboard.0054
Keyboard.0055
Keyboard.0056
Keyboard.0057
Keyboard.0058
Keyboard.0059
Keyboard.005a
Keyboard.005b
Keyboard.005c
Keyboard.005d
Keyboard.005e
Keyboard.005f
Keyboard.0060
Keyboard.0061
Keyboard.0062
Keyboard.0063
Keyboard.0064
Keyboard.0065
Keyboard.0066
Keyboard.0067
Keyboard.0068
Keyboard.0069
Keyboard.006a
Keyboard.006b
Keyboard.006c
Keyboard.006d
Keyboard.006e
Keyboard.006f
Keyboard.0070
Keyboard.0071
Keyboard.0072
Keyboard.0073
Keyboard.0074
Keyboard.0075
Keyboard.0076
Keyboard.0077
Keyboard.0078
Keyboard.0079
Keyboard.007a
Keyboard.007b
Keyboard.007c
Keyboard.007d
Keyboard.007e
Keyboard.007f
Keyboard.0080
Keyboard.0081
Keyboard.0082
Keyboard.0083
Keyboard.0084
Keyboard.0085
Keyboard.0086
Keyboard.0087
Keyboard.0088
Keyboard.0089
Keyboard.008a
Keyboard.008b
Keyboard.008c
Keyboard.008d
Keyboard.008e
Keyboard.008f
Keyboard.0090
Keyboard.0091
Keyboard.0092
Keyboard.0093
Keyboard.0094
Keyboard.0095
Keyboard.0096
Keyboard.0097
Keyboard.0098
Keyboard.0099
Keyboard.009a
Keyboard.009b
Keyboard.009c
Keyboard.009d
Keyboard.009e
Keyboard.009f
Keyboard.00a0
Keyboard.00a1
Keyboard.00a2
Keyboard.00a3
Keyboard.00a4
Keyboard.00a5
Keyboard.00a6
Keyboard.00a7
Keyboard.00a8
Keyboard.00a9
Keyboard.00aa
Keyboard.00ab
Keyboard.00ac
Keyboard.00ad
Keyboard.00ae
Keyboard.00af
Keyboard.00b0
Keyboard.00b1
Keyboard.00b2
Keyboard.00b3
Keyboard.00b4
Keyboard.00b5
Keyboard.00b6
Keyboard.00b7
Keyboard.00b8
Keyboard.00b9
Keyboard.00ba
Keyboard.00bb
Keyboard.00bc
Keyboard.00bd
Keyboard.00be
Keyboard.00bf
Keyboard.00c0
Keyboard.00c1
Keyboard.00c2
Keyboard.00c3
Keyboard.00c4
Keyboard.00c5
Keyboard.00c6
Keyboard.00c7
Keyboard.00c8
Keyboard.00c9
Keyboard.00ca
Keyboard.00cb
Keyboard.00cc
Keyboard.00cd
Keyboard.00ce
Keyboard.00cf
Keyboard.00d0
Keyboard.00d1
Keyboard.00d2
Keyboard.00d3
Keyboard.00d4
Keyboard.00d5
Keyboard.00d6
Keyboard.00d7
Keyboard.00d8
Keyboard.00d9
Keyboard.00da
Keyboard.00db
Keyboard.00dc
Keyboard.00dd
Keyboard.00de
Keyboard.00df
Keyboard.00e0
Keyboard.00e1
Keyboard.00e2
Keyboard.00e3
Keyboard.00e4
Keyboard.00e5
Keyboard.00e6
Keyboard.00e7
Keyboard.00e8
Keyboard.00e9
Keyboard.00ea
Keyboard.00eb
Keyboard.00ec
Keyboard.00ed
Keyboard.00ee
Keyboard.00ef
Keyboard.00f0
Keyboard.00f1
Keyboard.00f2
Keyboard.00f3
Keyboard.00f4
Keyboard.00f5
Keyboard.00f6
Keyboard.00f7
Keyboard.00f8
Keyboard.00f9
Keyboard.00fa
Keyboard.00fb
Keyboard.00fc
Keyboard.00fd
Keyboard.00fe
Keyboard.00ff
Logical Minimum(0)
Logical Maximum(255)
Report Size(8)
Report Count(6)
Report Offset(16)
Flags( Array Absolute )
OUTPUT[OUTPUT]
Field(0)
Usage(3)
LED.0001
LED.0002
LED.0003
Logical Minimum(0)
Logical Maximum(1)
Report Size(1)
Report Count(3)
Report Offset(0)
Flags( Variable Absolute )
Field(1)
Usage(5)
Undefined.GenericDesktop
Undefined.GenericDesktop
Undefined.GenericDesktop
Undefined.GenericDesktop
Undefined.GenericDesktop
Logical Minimum(0)
Logical Maximum(1)
Report Size(1)
Report Count(5)
Report Offset(3)
Flags( Constant Array Absolute )
input: USB HID v1.10 Keyboard [ABBAHOME USB Keyboar?] on usb-0000:00:02.1-1
usb 3-1: adding 3-1:1.1 (config #1, interface 1)
usb 3-1:1.1: hotplug
usbhid 3-1:1.1: usb_probe_interface
usbhid 3-1:1.1: usb_probe_interface - got id
drivers/usb/input/hid-core.c: HID probe called for ifnum 1
drivers/usb/input/hid-core.c: submitting ctrl urb: Get_Report wValue=0x0101 wIndex=0x0001 wLength=3
drivers/usb/input/hid-core.c: timeout waiting for ctrl or out queue to clear
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: empty report
drivers/usb/input/hid-core.c: submitting ctrl urb: Get_Report wValue=0x0102 wIndex=0x0001 wLength=2
drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
drivers/usb/input/hid-core.c: timeout waiting for ctrl or out queue to clear
[-- Attachment #3: dmesg-2.6.8-rc3-mm1-keyboard-unplugged --]
[-- Type: application/octet-stream, Size: 15721 bytes --]
1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
ohci_hcd 0000:00:02.1: urb c134d460 path 1 ep1in 5f160000 cc 5 --> status -110
drivers/usb/input/hid-core.c: nonzero status in input irq -110
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2004-08-10 19:43 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-08-02 19:00 USB troubles in rc2 Luis Miguel García Mancebo
2004-08-03 0:26 ` Greg KH
2004-08-03 2:08 ` Michael Guterl
2004-08-03 6:49 ` Trever L. Adams
2004-08-03 8:46 ` Luis Miguel García Mancebo
2004-08-03 13:57 ` Greg KH
2004-08-03 23:04 ` Luis Miguel García Mancebo
2004-08-04 20:32 ` Michael Guterl
2004-08-05 1:20 ` [linux-usb-devel] " David Brownell
2004-08-05 3:57 ` Michael Guterl
2004-08-05 15:34 ` David Brownell
2004-08-05 17:05 ` Michael Guterl
2004-08-07 17:51 ` David Brownell
2004-08-07 22:01 ` Wes Janzen
2004-08-08 3:19 ` Michael Guterl
2004-08-08 4:20 ` Alan Stern
2004-08-08 13:29 ` Michael Guterl
2004-08-10 17:16 ` Michael Guterl
2004-08-10 18:54 ` Alan Stern
2004-08-10 19:41 ` Michael Guterl
2004-08-05 18:08 ` Kevin O'Shea
2004-08-05 18:50 ` Michael Guterl
2004-08-06 14:23 ` Alan Stern
2004-08-05 3:59 ` Michael Guterl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox