no input with kernel 2.6.8-rc3-mm1 and X

no input with kernel 2.6.8-rc3-mm1 and X

[Micha Feigin]

With kernel 2.6.8-rc3-mm1 I lose input completely the moment I start
X. Keyboard is completely non-functional (include sysrq and num/ctrl
lock) and the touchpad also doesn't seem to produce anything.

The computer is otherwise functional and I can ssh in from another
machine and chvt to the console where I get the keyboard back. chvt
back to X kills input again.

Input is completely function in the console and with kernel 2.6.8-rc2
also with X, so I don't think its an X configuration problem.

Re: no input with kernel 2.6.8-rc3-mm1 and X

[Andrew Morton]

Micha Feigin <michf@post.tau.ac.il> wrote:
>
> With kernel 2.6.8-rc3-mm1 I lose input completely the moment I start
> X. Keyboard is completely non-functional (include sysrq and num/ctrl
> lock) and the touchpad also doesn't seem to produce anything.
>
> The computer is otherwise functional and I can ssh in from another
> machine and chvt to the console where I get the keyboard back. chvt
> back to X kills input again.

What interface is the keyboard using?  PS/2?  USB?

Does the mouse work?  What interface is the mouse using?

If you can, try reverting bk-input.patch and see if that fixes it up.  Or
bk-usb if you're using a USB keyboard.

Re: no input with kernel 2.6.8-rc3-mm1 and X

[Julien Oster]

Micha Feigin <michf@post.tau.ac.il> writes:

Hello,

> With kernel 2.6.8-rc3-mm1 I lose input completely the moment I start
> X. Keyboard is completely non-functional (include sysrq and num/ctrl
> lock) and the touchpad also doesn't seem to produce anything.

Before looking elsewhere, go into your BIOS setup and see if USB
mouse/keyboard legacy support is enabled. If it is, disable it.

That was often the cure for such problems for me.

Regards,
Julien

Re: no input with kernel 2.6.8-rc3-mm1 and X

[Micha Feigin]

On Sun, Aug 08, 2004 at 01:47:47PM -0700, Andrew Morton wrote:
> Micha Feigin <michf@post.tau.ac.il> wrote:
> >
> > With kernel 2.6.8-rc3-mm1 I lose input completely the moment I start
> > X. Keyboard is completely non-functional (include sysrq and num/ctrl
> > lock) and the touchpad also doesn't seem to produce anything.
> >
> > The computer is otherwise functional and I can ssh in from another
> > machine and chvt to the console where I get the keyboard back. chvt
> > back to X kills input again.
> 
> What interface is the keyboard using?  PS/2?  USB?
> 

Its  laptop built-in keyboard so I am not completely sure , but I
believe it is a ps/2.

> Does the mouse work?  What interface is the mouse using?
> 

The mouse is dead also. It is an alps touchpad using ps/2 interface
using the synaptics driver (along with the patch to support alps, but
also tried without it and didn't change behaviour). Didn't try an
external mouse (I don't use one regularly).

> If you can, try reverting bk-input.patch and see if that fixes it up.  Or
> bk-usb if you're using a USB keyboard.
> 

I backed out bk-input.patch and now things function properly, Thanks.

> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>  
>  +++++++++++++++++++++++++++++++++++++++++++
>  This Mail Was Scanned By Mail-seCure System
>  at the Tel-Aviv University CC.
>