From: Dan Aloni <da-x@colinux.org>
To: Sam Ravnborg <sam@ravnborg.org>, Benno <benjl@cse.unsw.edu.au>,
Linux Kernel List <linux-kernel@vger.kernel.org>
Subject: [PATCH] [#3 1/2] Generate vmlinux.lds instead of vmlinux.lds.s
Date: Sat, 14 Aug 2004 22:46:25 +0300 [thread overview]
Message-ID: <20040814194625.GA20753@callisto.yi.org> (raw)
In-Reply-To: <20040813183347.GA9098@mars.ravnborg.org>
Hello Sam,
Here's the first patch. Note that I had to choose PPFLAGS instead
of CPPFLAGS because otherwise it would have collided with the other
uses of CPPFLAGS.
I've test-built a clean kernel.
This applies against 2.6.8.1 (the Olympic kernel :).
diff -urN -X dontdiff2 -X /home/karrde/colinux/bin/dontdiff linux-2.6.8.1-callisto/Makefile linux-2.6.8.1-callisto-work/Makefile
--- linux-2.6.8.1-callisto/Makefile 2004-08-14 18:00:44.000000000 +0300
+++ linux-2.6.8.1-callisto-work/Makefile 2004-08-14 21:09:34.000000000 +0300
@@ -300,6 +300,7 @@
CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common
AFLAGS := -D__ASSEMBLY__
+PPFLAGS := -D__ASSEMBLY__
export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION KERNELRELEASE ARCH \
CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
@@ -309,6 +310,7 @@
export CPPFLAGS NOSTDINC_FLAGS OBJCOPYFLAGS LDFLAGS
export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
+export PPFLAGS PPFLAGS_KERNEL PPFLAGS_MODULE
# When compiling out-of-tree modules, put MODVERDIR in the module
# tree rather than in the kernel tree. The kernel tree might
@@ -540,7 +542,7 @@
do_system_map = $(NM) $(1) | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | sort > $(2)
-LDFLAGS_vmlinux += -T arch/$(ARCH)/kernel/vmlinux.lds.s
+LDFLAGS_vmlinux += -T arch/$(ARCH)/kernel/vmlinux.lds
# Generate section listing all symbols and add it into vmlinux
# It's a three stage process:
@@ -584,13 +586,13 @@
.tmp_kallsyms%.S: .tmp_vmlinux%
$(call cmd,kallsyms)
-.tmp_vmlinux1: $(vmlinux-objs) arch/$(ARCH)/kernel/vmlinux.lds.s FORCE
+.tmp_vmlinux1: $(vmlinux-objs) arch/$(ARCH)/kernel/vmlinux.lds FORCE
$(call if_changed_rule,vmlinux__)
-.tmp_vmlinux2: $(vmlinux-objs) .tmp_kallsyms1.o arch/$(ARCH)/kernel/vmlinux.lds.s FORCE
+.tmp_vmlinux2: $(vmlinux-objs) .tmp_kallsyms1.o arch/$(ARCH)/kernel/vmlinux.lds FORCE
$(call if_changed_rule,vmlinux__)
-.tmp_vmlinux3: $(vmlinux-objs) .tmp_kallsyms2.o arch/$(ARCH)/kernel/vmlinux.lds.s FORCE
+.tmp_vmlinux3: $(vmlinux-objs) .tmp_kallsyms2.o arch/$(ARCH)/kernel/vmlinux.lds FORCE
$(call if_changed_rule,vmlinux__)
endif
@@ -603,13 +605,13 @@
$(rule_verify_kallsyms)
endef
-vmlinux: $(vmlinux-objs) $(kallsyms.o) arch/$(ARCH)/kernel/vmlinux.lds.s FORCE
+vmlinux: $(vmlinux-objs) $(kallsyms.o) arch/$(ARCH)/kernel/vmlinux.lds FORCE
$(call if_changed_rule,vmlinux)
# The actual objects are generated when descending,
# make sure no implicit rule kicks in
-$(sort $(vmlinux-objs)) arch/$(ARCH)/kernel/vmlinux.lds.s: $(vmlinux-dirs) ;
+$(sort $(vmlinux-objs)) arch/$(ARCH)/kernel/vmlinux.lds: $(vmlinux-dirs) ;
# Handle descending into subdirectories listed in $(vmlinux-dirs)
# Preset locale variables to speed up the build process. Limit locale
@@ -667,7 +669,7 @@
# Leave this as default for preprocessing vmlinux.lds.S, which is now
# done in arch/$(ARCH)/kernel/Makefile
-export AFLAGS_vmlinux.lds.o += -P -C -U$(ARCH)
+export PPFLAGS_vmlinux.o += -P -C -U$(ARCH)
# Single targets
# ---------------------------------------------------------------------------
@@ -1106,6 +1108,10 @@
$(NOSTDINC_FLAGS) $(CPPFLAGS) \
$(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
+pp_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
+ $(NOSTDINC_FLAGS) $(CPPFLAGS) \
+ $(modkern_aflags) $(EXTRA_PPFLAGS) $(PPFLAGS_$(*F).o)
+
quiet_cmd_as_o_S = AS $@
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
diff -urN -X dontdiff2 -X /home/karrde/colinux/bin/dontdiff linux-2.6.8.1-callisto/arch/i386/kernel/Makefile linux-2.6.8.1-callisto-work/arch/i386/kernel/Makefile
--- linux-2.6.8.1-callisto/arch/i386/kernel/Makefile 2004-08-14 18:00:04.000000000 +0300
+++ linux-2.6.8.1-callisto-work/arch/i386/kernel/Makefile 2004-08-14 20:50:56.000000000 +0300
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-extra-y := head.o init_task.o vmlinux.lds.s
+extra-y := head.o init_task.o vmlinux.lds
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_i386.o \
diff -urN -X dontdiff2 -X /home/karrde/colinux/bin/dontdiff linux-2.6.8.1-callisto/scripts/Makefile.build linux-2.6.8.1-callisto-work/scripts/Makefile.build
--- linux-2.6.8.1-callisto/scripts/Makefile.build 2004-06-16 08:19:52.000000000 +0300
+++ linux-2.6.8.1-callisto-work/scripts/Makefile.build 2004-08-14 21:08:12.000000000 +0300
@@ -186,6 +186,20 @@
%.lst: %.c FORCE
$(call if_changed_dep,cc_lst_c)
+# Linker scripts preprocessor (.lds.S -> .lds)
+# ---------------------------------------------------------------------------
+
+modkern_ppflags := $(PPFLAGS_KERNEL)
+
+$(real-objs-m) : modkern_ppflags := $(PPFLAGS_MODULE)
+$(real-objs-m:.o=.s): modkern_ppflags := $(PPFLAGS_MODULE)
+
+quiet_cmd_cpp_lds_S = LDS $@
+ cmd_cpp_lds_S = $(CPP) $(pp_flags) -o $@ $<
+
+%.lds: %.lds.S FORCE
+ $(call if_changed_dep,cpp_lds_S)
+
# Compile assembler sources (.S)
# ---------------------------------------------------------------------------
diff -urN -X dontdiff2 -X /home/karrde/colinux/bin/dontdiff linux-2.6.8.1-callisto/scripts/Makefile.lib linux-2.6.8.1-callisto-work/scripts/Makefile.lib
--- linux-2.6.8.1-callisto/scripts/Makefile.lib 2004-06-16 08:19:23.000000000 +0300
+++ linux-2.6.8.1-callisto-work/scripts/Makefile.lib 2004-08-14 21:07:00.000000000 +0300
@@ -139,6 +139,7 @@
_c_flags = $(CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$(*F).o)
_a_flags = $(AFLAGS) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
+_pp_flags = $(PPFLAGS) $(EXTRA_PPFLAGS) $(PPFLAGS_$(*F).o)
_hostc_flags = $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) $(HOSTCFLAGS_$(*F).o)
_hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) $(HOSTCXXFLAGS_$(*F).o)
@@ -149,6 +150,7 @@
ifeq ($(KBUILD_SRC),)
__c_flags = $(_c_flags)
__a_flags = $(_a_flags)
+__pp_flags = $(_pp_flags)
__hostc_flags = $(_hostc_flags)
__hostcxx_flags = $(_hostcxx_flags)
else
@@ -164,6 +166,7 @@
# FIXME: Replace both with specific CFLAGS* statements in the makefiles
__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags)
__a_flags = $(call flags,_a_flags)
+__pp_flags = $(call flags,_pp_flags)
__hostc_flags = -I$(obj) $(call flags,_hostc_flags)
__hostcxx_flags = -I$(obj) $(call flags,_hostcxx_flags)
endif
@@ -175,6 +178,9 @@
a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(CPPFLAGS) \
$(__a_flags) $(modkern_aflags)
+pp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(CPPFLAGS) \
+ $(__pp_flags) $(modkern_ppflags)
+
hostc_flags = -Wp,-MD,$(depfile) $(__hostc_flags)
hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags)
--
Dan Aloni
da-x@colinux.org
next prev parent reply other threads:[~2004-08-14 19:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-12 19:25 Generation of *.s files from *.S files in kbuild Dan Aloni
2004-08-13 0:37 ` Benno
2004-08-13 5:04 ` Sam Ravnborg
2004-08-13 8:09 ` [PATCH 1/2] " Dan Aloni
2004-08-13 9:24 ` [PATCH 1/2] #2 (Generation of *.s files from *.S files in kbuild) Dan Aloni
2004-08-13 18:33 ` Sam Ravnborg
2004-08-13 19:09 ` Dan Aloni
2004-08-13 19:17 ` Sam Ravnborg
2004-08-14 19:46 ` Dan Aloni [this message]
2004-08-15 18:35 ` [PATCH] [#3 1/2] Generate vmlinux.lds instead of vmlinux.lds.s Sam Ravnborg
2004-08-14 19:49 ` [PATCH] [#3 2/2] " Dan Aloni
2004-08-13 8:12 ` Generation of *.s files from *.S files in kbuild Dan Aloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040814194625.GA20753@callisto.yi.org \
--to=da-x@colinux.org \
--cc=benjl@cse.unsw.edu.au \
--cc=linux-kernel@vger.kernel.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox