From: Jesse Barnes <jbarnes@engr.sgi.com>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.8.1-mm3
Date: Fri, 20 Aug 2004 14:46:11 -0400 [thread overview]
Message-ID: <200408201446.11409.jbarnes@engr.sgi.com> (raw)
In-Reply-To: <200408201144.49522.jbarnes@engr.sgi.com>
On Friday, August 20, 2004 11:44 am, Jesse Barnes wrote:
> On Friday, August 20, 2004 6:19 am, Andrew Morton wrote:
> > - This is (very) lightly tested. Mainly a resync with various parties.
>
> Woo-hoo! This boots *without changes* on a 512p Altix! Now to re-run the
> profiles and try wli's new per-cpu profiling buffers.
With some minor niggles of course (I thought these were fixed awhile ago?).
Jesse
NET: Registered protocol family 2
IP: routing cache hash table of 8388608 buckets, 131072Kbytes
swapper: page allocation failure. order:17, mode:0x20
Call Trace:
[<a0000001000193a0>] show_stack+0x80/0xa0
sp=e0000930037a7c40 bsp=e0000930037a1150
[<a0000001001140e0>] __alloc_pages+0x620/0x9a0
sp=e0000930037a7e10 bsp=e0000930037a10c0
[<a000000100151240>] alloc_page_interleave+0x100/0x1e0
sp=e0000930037a7e20 bsp=e0000930037a1090
[<a0000001001144a0>] __get_free_pages+0x40/0x100
sp=e0000930037a7e20 bsp=e0000930037a1068
[<a00000010073e9c0>] tcp_init+0x2c0/0x800
sp=e0000930037a7e20 bsp=e0000930037a1030
[<a00000010073fe10>] inet_init+0x330/0x3c0
sp=e0000930037a7e30 bsp=e0000930037a0ff0
[<a00000010070d070>] do_initcalls+0xb0/0x1e0
sp=e0000930037a7e30 bsp=e0000930037a0f88
[<a000000100009780>] init+0x100/0x440
sp=e0000930037a7e30 bsp=e0000930037a0f48
[<a00000010001b130>] kernel_thread_helper+0xd0/0x100
sp=e0000930037a7e30 bsp=e0000930037a0f20
[<a000000100009060>] start_kernel_thread+0x20/0x40
sp=e0000930037a7e30 bsp=e0000930037a0f20
swapper: page allocation failure. order:16, mode:0x20
Call Trace:
[<a0000001000193a0>] show_stack+0x80/0xa0
sp=e0000930037a7c40 bsp=e0000930037a1150
[<a0000001001140e0>] __alloc_pages+0x620/0x9a0
sp=e0000930037a7e10 bsp=e0000930037a10c0
[<a000000100151240>] alloc_page_interleave+0x100/0x1e0
sp=e0000930037a7e20 bsp=e0000930037a1090
[<a0000001001144a0>] __get_free_pages+0x40/0x100
sp=e0000930037a7e20 bsp=e0000930037a1068
[<a00000010073e9c0>] tcp_init+0x2c0/0x800
sp=e0000930037a7e20 bsp=e0000930037a1030
[<a00000010073fe10>] inet_init+0x330/0x3c0
sp=e0000930037a7e30 bsp=e0000930037a0ff0
[<a00000010070d070>] do_initcalls+0xb0/0x1e0
sp=e0000930037a7e30 bsp=e0000930037a0f88
[<a000000100009780>] init+0x100/0x440
sp=e0000930037a7e30 bsp=e0000930037a0f48
[<a00000010001b130>] kernel_thread_helper+0xd0/0x100
sp=e0000930037a7e30 bsp=e0000930037a0f20
[<a000000100009060>] start_kernel_thread+0x20/0x40
sp=e0000930037a7e30 bsp=e0000930037a0f20
TCP: Hash tables configured (established 33554432 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
next prev parent reply other threads:[~2004-08-20 18:51 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-20 10:19 2.6.8.1-mm3 Andrew Morton
2004-08-20 11:25 ` [PATCH] 2.6.8.1-mm3, fix visws kernel build Andrey Panin
2004-08-20 11:46 ` 2.6.8.1-mm3 Russell King
2004-08-20 11:47 ` [PATCH] 2.6.8.1-mm3, fix qla1280 build on visws Andrey Panin
2004-08-20 15:44 ` 2.6.8.1-mm3 Jesse Barnes
2004-08-20 16:57 ` 2.6.8.1-mm3 Jesse Barnes
2004-08-20 17:08 ` 2.6.8.1-mm3 Jesse Barnes
2004-08-20 18:55 ` 2.6.8.1-mm3 Andrew Morton
2004-08-20 19:56 ` 2.6.8.1-mm3 Jesse Barnes
2004-08-20 20:02 ` 2.6.8.1-mm3 William Lee Irwin III
2004-08-20 23:31 ` 2.6.8.1-mm3 Anton Blanchard
2004-08-21 0:03 ` 2.6.8.1-mm3 William Lee Irwin III
2004-08-21 7:04 ` 2.6.8.1-mm3 Martin J. Bligh
2004-08-21 15:22 ` 2.6.8.1-mm3 William Lee Irwin III
2004-08-21 19:59 ` 2.6.8.1-mm3 Jesse Barnes
2004-08-21 20:24 ` 2.6.8.1-mm3 William Lee Irwin III
2004-08-21 20:35 ` 2.6.8.1-mm3 Jesse Barnes
2004-08-23 9:02 ` 2.6.8.1-mm3 David Mosberger
2004-08-23 16:27 ` 2.6.8.1-mm3 wli
2004-08-23 18:18 ` 2.6.8.1-mm3 Jesse Barnes
2004-08-24 7:24 ` 2.6.8.1-mm3 David Mosberger
2004-08-20 18:04 ` 2.6.8.1-mm3 lockmeter on 512p w/kernbench Jesse Barnes
2004-09-10 16:25 ` Greg Edwards
2004-08-20 18:46 ` Jesse Barnes [this message]
2004-08-21 1:26 ` 2.6.8.1-mm3 Nick Piggin
2004-08-21 20:05 ` 2.6.8.1-mm3 Jesse Barnes
2004-08-22 1:27 ` 2.6.8.1-mm3 Jesse Barnes
2004-08-22 2:11 ` 2.6.8.1-mm3 Nick Piggin
2004-08-22 15:44 ` 2.6.8.1-mm3 Jesse Barnes
2004-08-20 17:38 ` 2.6.8.1-mm3 (build failture w/ CONFIG_NUMA) mita akinobu
2004-08-20 17:55 ` Jesse Barnes
2004-08-20 18:12 ` 2.6.8.1-mm3 (compile stats) John Cherry
2004-08-21 18:54 ` Herbert Poetzl
2004-08-21 17:37 ` 2.6.8.1-mm3 William Lee Irwin III
2004-08-22 13:02 ` 2.6.8.1-mm3 William Lee Irwin III
2004-08-21 18:51 ` 2.6.8.1-mm3 R. J. Wysocki
2004-08-22 4:32 ` 2.6.8.1-mm3 Thomas Davis
2004-08-22 4:48 ` 2.6.8.1-mm3 Andrew Morton
2004-08-22 4:58 ` 2.6.8.1-mm3 Nick Piggin
2004-08-22 6:26 ` 2.6.8.1-mm3 Thomas Davis
2004-08-22 6:51 ` 2.6.8.1-mm3 Pete Zaitcev
2004-08-22 15:11 ` 2.6.8.1-mm3 Bartlomiej Zolnierkiewicz
-- strict thread matches above, loose matches on Subject: below --
2004-08-21 14:43 2.6.8.1-mm3 Mikael Pettersson
2004-08-21 16:02 ` 2.6.8.1-mm3 James Bottomley
2004-08-21 17:15 2.6.8.1-mm3 Mikael Pettersson
2004-08-21 18:38 2.6.8.1-mm3 Mikael Pettersson
2004-08-21 19:14 ` 2.6.8.1-mm3 Patrick Mansfield
2004-08-21 19:24 ` 2.6.8.1-mm3 James Bottomley
2004-08-21 21:47 ` 2.6.8.1-mm3 Matthew Wilcox
2004-08-25 3:50 ` 2.6.8.1-mm3 James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200408201446.11409.jbarnes@engr.sgi.com \
--to=jbarnes@engr.sgi.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox