From: Martin Schwidefsky <schwidefsky@de.ibm.com>
To: akpm@osdl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] s390: core changes.
Date: Mon, 30 Aug 2004 20:02:45 +0200 [thread overview]
Message-ID: <20040830180245.GA6411@mschwid3.boeblingen.de.ibm.com> (raw)
[PATCH] s390: core changes.
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390 core changes:
- Fix a race condition between kernel thread creation and preemption.
- Fix idal_is_needed for the border case 0x7ffff000.
- Get rid of compiler warnings in compat_signal.c and profile.c.
- Regenerate default configuration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diffstat:
arch/s390/defconfig | 11 ++++++++---
arch/s390/kernel/compat_signal.c | 24 +++++++++++++++++-------
arch/s390/kernel/entry.S | 5 ++++-
arch/s390/kernel/entry64.S | 5 ++++-
arch/s390/kernel/process.c | 27 +++------------------------
arch/s390/kernel/profile.c | 1 +
include/asm-s390/idals.h | 2 +-
7 files changed, 38 insertions(+), 37 deletions(-)
diff -urN linux-2.6/arch/s390/defconfig linux-2.6-s390/arch/s390/defconfig
--- linux-2.6/arch/s390/defconfig Mon Aug 30 19:14:07 2004
+++ linux-2.6-s390/arch/s390/defconfig Mon Aug 30 19:14:21 2004
@@ -1,5 +1,7 @@
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.9-rc1
+# Mon Aug 30 19:03:48 2004
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -130,9 +132,7 @@
#
# SCSI low-level drivers
#
-# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ZFCP=y
CONFIG_CCW=y
@@ -168,6 +168,7 @@
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=m
# CONFIG_MD_RAID6 is not set
CONFIG_MD_MULTIPATH=m
@@ -236,11 +237,13 @@
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
CONFIG_XFRM=y
@@ -442,6 +445,7 @@
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
@@ -485,8 +489,8 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_INFO is not set
#
# Security options
@@ -505,6 +509,7 @@
# CONFIG_CRYPTO_SHA1_Z990 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WHIRLPOOL is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES_Z990 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
diff -urN linux-2.6/arch/s390/kernel/compat_signal.c linux-2.6-s390/arch/s390/kernel/compat_signal.c
--- linux-2.6/arch/s390/kernel/compat_signal.c Mon Aug 30 19:14:07 2004
+++ linux-2.6-s390/arch/s390/kernel/compat_signal.c Mon Aug 30 19:14:21 2004
@@ -218,14 +218,17 @@
struct old_sigaction32 __user *oact)
{
struct k_sigaction new_ka, old_ka;
+ unsigned long sa_handler, sa_restorer;
int ret;
if (act) {
compat_old_sigset_t mask;
if (verify_area(VERIFY_READ, act, sizeof(*act)) ||
- __get_user((unsigned long)new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user((unsigned long)new_ka.sa.sa_restorer, &act->sa_restorer))
+ __get_user(sa_handler, &act->sa_handler) ||
+ __get_user(sa_restorer, &act->sa_restorer))
return -EFAULT;
+ new_ka.sa.sa_handler = (__sighandler_t) sa_handler;
+ new_ka.sa.sa_restorer = (void (*)(void)) sa_restorer;
__get_user(new_ka.sa.sa_flags, &act->sa_flags);
__get_user(mask, &act->sa_mask);
siginitset(&new_ka.sa.sa_mask, mask);
@@ -234,9 +237,11 @@
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
+ sa_handler = (unsigned long) old_ka.sa.sa_handler;
+ sa_restorer = (unsigned long) old_ka.sa.sa_restorer;
if (verify_area(VERIFY_WRITE, oact, sizeof(*oact)) ||
- __put_user((unsigned long)old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user((unsigned long)old_ka.sa.sa_restorer, &oact->sa_restorer))
+ __put_user(sa_handler, &oact->sa_handler) ||
+ __put_user(sa_restorer, &oact->sa_restorer))
return -EFAULT;
__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
@@ -253,6 +258,7 @@
struct sigaction32 __user *oact, size_t sigsetsize)
{
struct k_sigaction new_ka, old_ka;
+ unsigned long sa_handler;
int ret;
compat_sigset_t set32;
@@ -261,7 +267,7 @@
return -EINVAL;
if (act) {
- ret = get_user((unsigned long)new_ka.sa.sa_handler, &act->sa_handler);
+ ret = get_user(sa_handler, &act->sa_handler);
ret |= __copy_from_user(&set32, &act->sa_mask,
sizeof(compat_sigset_t));
switch (_NSIG_WORDS) {
@@ -278,6 +284,7 @@
if (ret)
return -EFAULT;
+ new_ka.sa.sa_handler = (__sighandler_t) sa_handler;
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
@@ -311,17 +318,19 @@
struct pt_regs *regs)
{
stack_t kss, koss;
+ unsigned long ss_sp;
int ret, err = 0;
mm_segment_t old_fs = get_fs();
if (uss) {
if (!access_ok(VERIFY_READ, uss, sizeof(*uss)))
return -EFAULT;
- err |= __get_user((unsigned long) kss.ss_sp, &uss->ss_sp);
+ err |= __get_user(ss_sp, &uss->ss_sp);
err |= __get_user(kss.ss_size, &uss->ss_size);
err |= __get_user(kss.ss_flags, &uss->ss_flags);
if (err)
return -EFAULT;
+ kss.ss_sp = (void *) ss_sp;
}
set_fs (KERNEL_DS);
@@ -333,7 +342,8 @@
if (!ret && uoss) {
if (!access_ok(VERIFY_WRITE, uoss, sizeof(*uoss)))
return -EFAULT;
- err |= __put_user((unsigned long) koss.ss_sp, &uoss->ss_sp);
+ ss_sp = (unsigned long) koss.ss_sp;
+ err |= __put_user(ss_sp, &uoss->ss_sp);
err |= __put_user(koss.ss_size, &uoss->ss_size);
err |= __put_user(koss.ss_flags, &uoss->ss_flags);
if (err)
diff -urN linux-2.6/arch/s390/kernel/entry.S linux-2.6-s390/arch/s390/kernel/entry.S
--- linux-2.6/arch/s390/kernel/entry.S Sat Aug 14 12:54:51 2004
+++ linux-2.6-s390/arch/s390/kernel/entry.S Mon Aug 30 19:14:21 2004
@@ -304,7 +304,10 @@
ret_from_fork:
l %r13,__LC_SVC_NEW_PSW+4
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- l %r1,BASED(.Lschedtail)
+ tm SP_PSW+1(%r15),0x01 # forking a kernel thread ?
+ bo BASED(0f)
+ st %r15,SP_R15(%r15) # store stack pointer for new kthread
+0: l %r1,BASED(.Lschedtail)
basr %r14,%r1
stosm 24(%r15),0x03 # reenable interrupts
b BASED(sysc_return)
diff -urN linux-2.6/arch/s390/kernel/entry64.S linux-2.6-s390/arch/s390/kernel/entry64.S
--- linux-2.6/arch/s390/kernel/entry64.S Sat Aug 14 12:54:51 2004
+++ linux-2.6-s390/arch/s390/kernel/entry64.S Mon Aug 30 19:14:21 2004
@@ -304,7 +304,10 @@
ret_from_fork:
lg %r13,__LC_SVC_NEW_PSW+8
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- brasl %r14,schedule_tail
+ tm SP_PSW+1(%r15),0x01 # forking a kernel thread ?
+ jo 0f
+ stg %r15,SP_R15(%r15) # store stack pointer for new kthread
+0: brasl %r14,schedule_tail
stosm 24(%r15),0x03 # reenable interrupts
j sysc_return
diff -urN linux-2.6/arch/s390/kernel/process.c linux-2.6-s390/arch/s390/kernel/process.c
--- linux-2.6/arch/s390/kernel/process.c Mon Aug 30 19:14:07 2004
+++ linux-2.6-s390/arch/s390/kernel/process.c Mon Aug 30 19:14:21 2004
@@ -186,41 +186,20 @@
extern void kernel_thread_starter(void);
-#ifndef CONFIG_ARCH_S390X
-
-__asm__(".align 4\n"
- "kernel_thread_starter:\n"
- " l 15,0(8)\n"
- " sr 15,7\n"
- " stosm 24(15),3\n"
- " lr 2,10\n"
- " basr 14,9\n"
- " sr 2,2\n"
- " br 11\n");
-
-#else /* CONFIG_ARCH_S390X */
-
__asm__(".align 4\n"
"kernel_thread_starter:\n"
- " lg 15,0(8)\n"
- " sgr 15,7\n"
- " stosm 48(15),3\n"
- " lgr 2,10\n"
+ " la 2,0(10)\n"
" basr 14,9\n"
- " sgr 2,2\n"
+ " la 2,0\n"
" br 11\n");
-#endif /* CONFIG_ARCH_S390X */
-
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
struct pt_regs regs;
memset(®s, 0, sizeof(regs));
- regs.psw.mask = PSW_KERNEL_BITS;
+ regs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_IO | PSW_MASK_EXT;
regs.psw.addr = (unsigned long) kernel_thread_starter | PSW_ADDR_AMODE;
- regs.gprs[7] = STACK_FRAME_OVERHEAD + sizeof(struct pt_regs);
- regs.gprs[8] = __LC_KERNEL_STACK;
regs.gprs[9] = (unsigned long) fn;
regs.gprs[10] = (unsigned long) arg;
regs.gprs[11] = (unsigned long) do_exit;
diff -urN linux-2.6/arch/s390/kernel/profile.c linux-2.6-s390/arch/s390/kernel/profile.c
--- linux-2.6/arch/s390/kernel/profile.c Mon Aug 30 19:14:07 2004
+++ linux-2.6-s390/arch/s390/kernel/profile.c Mon Aug 30 19:14:21 2004
@@ -6,6 +6,7 @@
*
*/
#include <linux/proc_fs.h>
+#include <linux/profile.h>
static struct proc_dir_entry * root_irq_dir;
diff -urN linux-2.6/include/asm-s390/idals.h linux-2.6-s390/include/asm-s390/idals.h
--- linux-2.6/include/asm-s390/idals.h Sat Aug 14 12:54:48 2004
+++ linux-2.6-s390/include/asm-s390/idals.h Mon Aug 30 19:14:21 2004
@@ -35,7 +35,7 @@
idal_is_needed(void *vaddr, unsigned int length)
{
#ifdef __s390x__
- return ((__pa(vaddr) + length) >> 31) != 0;
+ return ((__pa(vaddr) + length - 1) >> 31) != 0;
#else
return 0;
#endif
next reply other threads:[~2004-08-30 18:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-30 18:02 Martin Schwidefsky [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-08-17 13:51 [PATCH] s390: core changes Martin Schwidefsky
2004-08-17 14:12 ` Christoph Hellwig
2004-08-05 13:13 Martin Schwidefsky
2004-06-30 17:07 Martin Schwidefsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040830180245.GA6411@mschwid3.boeblingen.de.ibm.com \
--to=schwidefsky@de.ibm.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox