* [PATCH BK][ARM] Various ARM updates for 2.6.9
@ 2004-10-22 18:14 Deepak Saxena
2004-10-22 18:41 ` Deepak Saxena
0 siblings, 1 reply; 2+ messages in thread
From: Deepak Saxena @ 2004-10-22 18:14 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Andrew Morton, rmk, linux-kernel
Linus
Please do a
bk pull bk://dsaxena.bkbits.net/linux-2.6-for-rmk
This pull contains a set of ARM updates that have been pending in my
tree but Russell has not had a chance to pull them. They have been
tested by various folks and Russell has OK'd for me to push them
directly to you.
This will update the following files:
Documentation/arm/IXP2000 | 10
Documentation/arm/IXP4xx | 11
arch/arm/kernel/entry-armv.S | 997 --------------------------
arch/arm/kernel/entry-header.S | 2
arch/arm/mach-ixp2000/core.c | 104 --
arch/arm/mach-ixp2000/ixdp2x00.c | 6
arch/arm/mach-ixp2000/ixdp2x01.c | 35
arch/arm/mach-ixp2000/pci.c | 8
arch/arm/mach-ixp4xx/Kconfig | 7
arch/arm/mach-ixp4xx/Makefile | 1
arch/arm/mach-ixp4xx/common-pci.c | 30
arch/arm/mach-ixp4xx/common.c | 5
arch/arm/mach-ixp4xx/coyote-setup.c | 35
arch/arm/mach-ixp4xx/ixdpg425-pci.c | 65 +
arch/arm/mm/mm-armv.c | 25
include/asm-arm/arch-cl7500/entry-macro.S | 3
include/asm-arm/arch-clps711x/entry-macro.S | 51 +
include/asm-arm/arch-ebsa110/entry-macro.S | 36
include/asm-arm/arch-ebsa285/entry-macro.S | 106 ++
include/asm-arm/arch-epxa10db/entry-macro.S | 27
include/asm-arm/arch-h720x/entry-macro.S | 57 +
include/asm-arm/arch-imx/entry-macro.S | 31
include/asm-arm/arch-integrator/entry-macro.S | 35
include/asm-arm/arch-iop3xx/entry-macro.S | 62 +
include/asm-arm/arch-ixp2000/dma.h | 2
include/asm-arm/arch-ixp2000/entry-macro.S | 53 +
include/asm-arm/arch-ixp2000/io.h | 2
include/asm-arm/arch-ixp2000/irqs.h | 30
include/asm-arm/arch-ixp2000/ixdp2x00.h | 4
include/asm-arm/arch-ixp2000/ixdp2x01.h | 8
include/asm-arm/arch-ixp2000/ixp2000-regs.h | 79 +-
include/asm-arm/arch-ixp2000/platform.h | 6
include/asm-arm/arch-ixp2000/serial.h | 4
include/asm-arm/arch-ixp2000/system.h | 2
include/asm-arm/arch-ixp2000/vmalloc.h | 2
include/asm-arm/arch-ixp4xx/entry-macro.S | 26
include/asm-arm/arch-ixp4xx/ixp4xx-regs.h | 2
include/asm-arm/arch-l7200/entry-macro.S | 30
include/asm-arm/arch-lh7a40x/entry-macro.S | 67 +
include/asm-arm/arch-omap/entry-macro.S | 32
include/asm-arm/arch-pxa/entry-macro.S | 32
include/asm-arm/arch-rpc/entry-macro.S | 3
include/asm-arm/arch-s3c2410/entry-macro.S | 128 +++
include/asm-arm/arch-sa1100/entry-macro.S | 40 +
include/asm-arm/arch-shark/entry-macro.S | 36
include/asm-arm/arch-versatile/entry-macro.S | 37
include/asm-arm/hardware/entry-macro-iomd.S | 145 +++
include/asm-arm/mach/map.h | 11
48 files changed, 1324 insertions(+), 1206 deletions(-)
through these ChangeSets:
<dsaxena@plexity.net> (04/09/16 1.1842.1.1)
[ARM] Move platform-specific code out of entry-armv.S
This patch borrows from the uclinux source where they have moved
the per-platform code for get_irqnr_and_base, disable_fiq, and
irq_prio_table out of entry-armv.S. However, instead of putting the
macros in arch/arm/mach-$(MACHINE)/entry-header.S, we just have
it in the machine's incdir. This means we don't need the extra
complexity of creating symlink at build time. The patch also removes
the irq_prio_table as a requirement for all machines and makes it
specific to IOC/IOMD machines.
This patch drastically shrinks entry-armv.S and allows us to delete
and add machines without having to touch generic code (there were two
dead machines laying around in entry-armv.S).
Tested on IXP4xx and test-built for following def-configs:
rpc, mainstone, neponset, netwinder, footbrdige, ixdp2400,
iq80331, and mx1ads
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<dsaxena@plexity.net> (04/09/16 1.1842.1.2)
[ARM] Remove leftover NEXUSPCI machine reference
ARCH_NEXUSPCI since machine is no longer in kernel, so removing
leftover reference in arch/arm/boot/Makefile.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<buytenh@wantstofly.org> (04/09/17 1.1837.1.1)
[ARM] Fix a few typos in arch/arm/boot/Makefile
IXP4xx and IXP2000 had params-phys when it should be params_phys
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<dsaxena@plexity.net> (04/09/22 1.1842.1.4)
[ARM] IXP2400 erratum #66 workaround using MT_IXP2000_DEVICE
Intel's IXP2400 chip contains an erratum (#66) that requires
tweaking the page table entries of on-board I/O devices so that
instead of mapping them CB=00, we must map them XCB=101. Without
this, writes to I/O regions cannot be guaranteed to complete in
order and we can end up with data from a write to regsiter A in
register B. This is very bad and leads to intermittent crashes.
This changeset adds a MT_IXP2000_DEVICE mem_types entry with XCB
set to 101 for section mappings and rearranges the memory map
on the IXP2000 port to map on-board devices via sections instead
of pages. While this wastes a bit more VM, it solves the issues
without the need of board-specific hacks in proc-xscale.S or
walking the page table to set the PMDs after mapping the I/O.
These changes have been tested by myself on IXDP2401 and by
Lennert Buytenhek on ENP-2611.
For more information on the issue:
ARM mailing list discussions (tinyurl to make readable):
http://tinyurl.com/6b64h
http://tinyurl.com/6zfs9
http://tinyurl.com/3nzjd
Intel Specification Update for IXP2400:
ftp://download.intel.com/design/network/specupdt/30116110.pdf
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<buytenh@wantstofly.org> (04/09/22 1.1842.1.5)
[ARM] Cleanup use of ixp_reg_write in arch/arm/mach-ixp2000
Several files in this directory directly dereference pointers
to on-chip I/O instead of using ixp_reg_write, making them
susceptible to IXP2400 erratum #66. This changset fixes those.
We do not touch any files that will only be built for IXP2800
systems as the 2800 does not have this issue.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxerna@plexity.net>
<dsaxena@plexity.net> (04/09/24 1.1842.2.1)
[ARM] Fix IXP4xx PCI bus scan routines
The IXP4xx PCI bus scan routines currently virtualize accesses
to device 0:0 to map to the host bridge itself. This is technically
incorrect b/c on certain boards have an actual device wired to 0:0
and the existing code will not see these.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<dsaxena@plexity.net> (04/09/28 1.1842.2.2)
[ARM] Add IXDPG425 platform support
Add support for new IXP4xx platform from Intel.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<palves@portus.com.sg> (04/09/29 1.1842.2.3)
[ARM] Fix ixp4xx-regs.h PCI config address typo
There seems to be a typo that has creeped into
include/asm/arch-ixp4xx/ixp4xx-regs.h. IXP4XX_EXP_CFG_BASE_VIRT and
IXP4XX_PCI_CFG_BASE_VIRT were both defined to the same value. The patch
changes them to the value in the memory map comment.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<y.rutschle@indigovision.com> (04/09/29 1.1842.2.4)
[ARM] Fix IXP4xx timer interrupt implementation
The current timer interrupt implementation can cause time to skip
forward by ~65s and causes a 1 minute pause during bootup. The fix
for this was found during 2.4 but got lost in the 2.6 transition.
Details @:
http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2003-September/017171.html
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<dsaxena@plexity.net> (04/10/04 1.1842.3.1)
[ARM] Fix header file ordering for IRQ handling
We need to include <asm/arch/irqs.h> before <asm/arch/entry-macro.S>
because entry-macro.S might need the platform IRQ definitions.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<dsaxena@plexity.net> (04/10/07 1.1842.3.2)
[ARM] Add I2C controller to IXDP2x01 platforms
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<buytenh@wantstofly.org> (04/10/07 1.1842.3.3)
[ARM] Various typo fixes and comment cleanups for IXP2000
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<buytenh@wantstofly.org> (04/10/08 1.1842.3.4)
[ARM] Force IXP2000 slowport to 8-bit operation
As I understand it, the IXP2000 slowport has two modes:
- 8-bit. In this mode, every 8-bit read by the xscale core is sent
to the slowport as a single 8-bit read, and on a 16-bit or 32-bit
read, the xscale core does either 2 or 4 individual byte reads and
combines them according to its current endian setting.
- 32-bit. In this mode, every 32-bit read is sent to the slowport
as a 32-bit read, and the slowport then does four individual 8-bit
reads and combines them into a 32-bit value according to little
endian byte ordering. 8-bit accesses are done in this mode by
doing a 32-bit access, and extracting the relevant sub-byte.
So when the xscale is in big-endian mode and the slowport is in 32-bit
mode, a read from byte address #0 will actually cause the byte at
address #3 to be read. The same with #1-#2, and of course vice versa.
The only thing that 32-bit mode is good for is the initial boot. If
you flash the bootloader into flash with little-endian byte ordering,
then the xscale will always read the (32-bit) instructions in its
then-current word ordering regardless of whether that is big or
little endian.
After booting, it doesn't make any sense to use 32-bit mode anymore.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<buytenh@wantstofly.org> (04/10/08 1.1842.3.5)
[ARM] Don't mask IRQ_STATUS with IXP2000_VALID_IRQ_MASK
According to the IXP Programmer's Reference Manual, a read from
IRQ_STATUS can only return '1' for IRQ sources that have been
explicitly enabled in IRQ_ENABLE. So if we never enable 'invalid'
IRQ sources, we don't actually have to mask off IRQ_STATUS with
IXP2000_VALID_IRQ_MASK.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<buytenh@wantstofly.org> (04/10/08 1.1842.3.6)
[ARM] Fix some more IXP2000 comments
ixp2000-regs.h has a minor typo in a comment (0xc000000 instead of
0xc0000000.) While we're at it, add warnings about the virtual
addresses of the CAP, INTCTL and PCI_CSR mappings having been
hardcoded elsewhere, just in case anyone ever tries to move them
around and ends up wondering why it doesn't work.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<buytenh@wantstofly.org> (04/10/11 1.1842.3.7)
[ARM} Rename IRQ_IXP2000_SWI as IRQ_IXP2000_SOFT_INT
IXP2000 interrupt source zero is a software-generated interrupt source,
but it is not an SWI in the ARM sense of the word. Rename the interrupt
source to reduce confusion.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<buytenh@wantstofly.org> (04/10/11 1.1842.3.8)
[ARM] Rip out ixp2000 IRQ_ERR_STATUS demultiplexing
There are thirteen different IRQs chained off IRQ_ERR_STATUS, one for
each possible error class that the IXP can signal an interrupt for, but
there are no in-tree users of these interrupts, and it doesn't make much
sense to treat them as separate interrupts if we can just have one
handler checking each of the thirteen errors in one go instead.
Besides that, the error interrupt handling can't even have been working
properly in the first place as the chained handler was testing the wrong
bits in the IRQ_ERR_STATUS register.
So this patch rips it all out.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<dsaxena@plexity.net> (04/10/17 1.1988.93.2)
[ARM] Add H720x entry-macro.S header file
Compile tested with both h7201 and h7202 defconfigs.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
<dsaxena@plexity.net> (04/10/21 1.2038)
[ARM] Make IXDPG425 use new timer infrastructure
A new IXP4xx machine type was added to my tree and
needs updating to use new timer infrastructure.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
In reponse to this message I will post the individual changesets to the
mailing list for those that want to see/review them.
--
Deepak Saxena - dsaxena at plexity dot net - http://www.plexity.net/
"Unlike me, many of you have accepted the situation of your imprisonment
and will die here like rotten cabbages." - Number 6
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH BK][ARM] Various ARM updates for 2.6.9
2004-10-22 18:14 [PATCH BK][ARM] Various ARM updates for 2.6.9 Deepak Saxena
@ 2004-10-22 18:41 ` Deepak Saxena
0 siblings, 0 replies; 2+ messages in thread
From: Deepak Saxena @ 2004-10-22 18:41 UTC (permalink / raw)
To: linux-kernel
On Oct 22 2004, at 11:14, Deepak Saxena was caught saying:
> In reponse to this message I will post the individual changesets to the
> mailing list for those that want to see/review them.
Actually, these are already posted on linux-arm-kernel and if anyone
wants to see them, just look at the archives:
http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-October/024979.html
~Deepak
--
Deepak Saxena - dsaxena at plexity dot net - http://www.plexity.net/
"Unlike me, many of you have accepted the situation of your imprisonment
and will die here like rotten cabbages." - Number 6
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-10-22 18:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-22 18:14 [PATCH BK][ARM] Various ARM updates for 2.6.9 Deepak Saxena
2004-10-22 18:41 ` Deepak Saxena
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).