From: Adrian Bunk <bunk@stusta.de>
To: achim_leubner@adaptec.com
Cc: James.Bottomley@SteelEye.com, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [2.6 patch] SCSI gdth: make some code static
Date: Mon, 15 Nov 2004 03:01:42 +0100 [thread overview]
Message-ID: <20041115020142.GJ2249@stusta.de> (raw)
the patch below makes some code without external users static.
diffstat output:
drivers/scsi/gdth.c | 26 +++++++++++++-------------
drivers/scsi/gdth.h | 12 ------------
2 files changed, 13 insertions(+), 25 deletions(-)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.10-rc1-mm5-full/drivers/scsi/gdth.h.old 2004-11-13 21:04:25.000000000 +0100
+++ linux-2.6.10-rc1-mm5-full/drivers/scsi/gdth.h 2004-11-13 21:43:29.000000000 +0100
@@ -1029,16 +1029,9 @@
/* function prototyping */
-int gdth_detect(Scsi_Host_Template *);
-int gdth_release(struct Scsi_Host *);
-int gdth_queuecommand(Scsi_Cmnd *,void (*done)(Scsi_Cmnd *));
-const char *gdth_info(struct Scsi_Host *);
-
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-int gdth_bios_param(struct scsi_device *,struct block_device *,sector_t,int *);
int gdth_proc_info(struct Scsi_Host *, char *,char **,off_t,int,int);
#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
-int gdth_bios_param(Disk *,kdev_t,int *);
int gdth_proc_info(char *,char **,off_t,int,int,int);
#else
int gdth_bios_param(Disk *,kdev_t,int *);
@@ -1071,9 +1064,4 @@
use_new_eh_code: 1 /* use new error code */ }
#endif
-int gdth_eh_abort(Scsi_Cmnd *scp);
-int gdth_eh_device_reset(Scsi_Cmnd *scp);
-int gdth_eh_bus_reset(Scsi_Cmnd *scp);
-int gdth_eh_host_reset(Scsi_Cmnd *scp);
-
#endif
--- linux-2.6.10-rc1-mm5-full/drivers/scsi/gdth.c.old 2004-11-13 21:05:12.000000000 +0100
+++ linux-2.6.10-rc1-mm5-full/drivers/scsi/gdth.c 2004-11-13 21:44:41.000000000 +0100
@@ -4331,7 +4331,7 @@
}
#ifdef GDTH_STATISTICS
-void gdth_timeout(ulong data)
+static void gdth_timeout(ulong data)
{
ulong32 i;
Scsi_Cmnd *nscp;
@@ -4359,7 +4359,7 @@
}
#endif
-GDTH_INITFUNC(void, internal_setup(char *str,int *ints))
+static GDTH_INITFUNC(void, internal_setup(char *str,int *ints))
{
int i, argc;
char *cur_str, *argv;
@@ -4432,7 +4432,7 @@
}
}
-GDTH_INITFUNC(int, option_setup(char *str))
+static GDTH_INITFUNC(int, option_setup(char *str))
{
int ints[MAXHA];
char *cur = str;
@@ -4450,7 +4450,7 @@
return 1;
}
-GDTH_INITFUNC(int, gdth_detect(Scsi_Host_Template *shtp))
+static GDTH_INITFUNC(int, gdth_detect(Scsi_Host_Template *shtp))
{
struct Scsi_Host *shp;
gdth_pci_str pcistr[MAXHA];
@@ -4985,7 +4985,7 @@
}
-int gdth_release(struct Scsi_Host *shp)
+static int gdth_release(struct Scsi_Host *shp)
{
int hanum;
gdth_ha_str *ha;
@@ -5086,7 +5086,7 @@
return("");
}
-const char *gdth_info(struct Scsi_Host *shp)
+static const char *gdth_info(struct Scsi_Host *shp)
{
int hanum;
gdth_ha_str *ha;
@@ -5114,19 +5114,19 @@
#endif
/* new error handling */
-int gdth_eh_abort(Scsi_Cmnd *scp)
+static int gdth_eh_abort(Scsi_Cmnd *scp)
{
TRACE2(("gdth_eh_abort()\n"));
return FAILED;
}
-int gdth_eh_device_reset(Scsi_Cmnd *scp)
+static int gdth_eh_device_reset(Scsi_Cmnd *scp)
{
TRACE2(("gdth_eh_device_reset()\n"));
return FAILED;
}
-int gdth_eh_bus_reset(Scsi_Cmnd *scp)
+static int gdth_eh_bus_reset(Scsi_Cmnd *scp)
{
int i, hanum;
gdth_ha_str *ha;
@@ -5188,7 +5188,7 @@
return SUCCESS;
}
-int gdth_eh_host_reset(Scsi_Cmnd *scp)
+static int gdth_eh_host_reset(Scsi_Cmnd *scp)
{
TRACE2(("gdth_eh_host_reset()\n"));
return FAILED;
@@ -5196,9 +5196,9 @@
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-int gdth_bios_param(struct scsi_device *sdev,struct block_device *bdev,sector_t cap,int *ip)
+static int gdth_bios_param(struct scsi_device *sdev,struct block_device *bdev,sector_t cap,int *ip)
#else
-int gdth_bios_param(Disk *disk,kdev_t dev,int *ip)
+static int gdth_bios_param(Disk *disk,kdev_t dev,int *ip)
#endif
{
unchar b, t;
@@ -5236,7 +5236,7 @@
}
-int gdth_queuecommand(Scsi_Cmnd *scp,void (*done)(Scsi_Cmnd *))
+static int gdth_queuecommand(Scsi_Cmnd *scp,void (*done)(Scsi_Cmnd *))
{
int hanum;
int priority;
reply other threads:[~2004-11-15 2:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041115020142.GJ2249@stusta.de \
--to=bunk@stusta.de \
--cc=James.Bottomley@SteelEye.com \
--cc=achim_leubner@adaptec.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox