From: Adrian Bunk <bunk@stusta.de>
To: James.Bottomley@SteelEye.com
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [2.6 patch] SCSI qla1280: some firmware files cleanups
Date: Mon, 15 Nov 2004 03:26:40 +0100 [thread overview]
Message-ID: <20041115022640.GX2249@stusta.de> (raw)
The patch below does the following changes to the qla1280 firmware
files:
- make all this needlessly global code static
- remove the unused firmware_version variables
diffstat output:
drivers/scsi/ql1040_fw.h | 10 ++++------
drivers/scsi/ql12160_fw.h | 22 ++++++++--------------
drivers/scsi/ql1280_fw.h | 22 ++++++++--------------
3 files changed, 20 insertions(+), 34 deletions(-)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.10-rc1-mm5-full/drivers/scsi/ql1040_fw.h.old 2004-11-13 22:51:55.000000000 +0100
+++ linux-2.6.10-rc1-mm5-full/drivers/scsi/ql1040_fw.h 2004-11-13 23:13:12.000000000 +0100
@@ -28,15 +28,13 @@
* Firmware Version 7.65.00 (14:17 Jul 20, 1999)
*/
-unsigned short risc_code_version = 7*1024+65;
-
-unsigned char firmware_version[] = {7,65,0};
+static unsigned char firmware_version[] = {7,65,0};
#define FW_VERSION_STRING "7.65.0"
-unsigned short risc_code_addr01 = 0x1000 ;
+static unsigned short risc_code_addr01 = 0x1000 ;
-unsigned short risc_code01[] = {
+static unsigned short risc_code01[] = {
0x0078, 0x103a, 0x0000, 0x4057, 0x0000, 0x2043, 0x4f50, 0x5952,
0x4947, 0x4854, 0x2031, 0x3939, 0x3520, 0x514c, 0x4f47, 0x4943,
0x2043, 0x4f52, 0x504f, 0x5241, 0x5449, 0x4f4e, 0x2049, 0x5350,
@@ -2097,5 +2095,5 @@
0x0014, 0x878e, 0x0016, 0xa21c, 0x1035, 0xa8af, 0xa210, 0x3807,
0x300c, 0x817e, 0x872b, 0x8772, 0xa8a8, 0x0000, 0xdf21
};
-unsigned short risc_code_length01 = 0x4057;
+static unsigned short risc_code_length01 = 0x4057;
--- linux-2.6.10-rc1-mm5-full/drivers/scsi/ql1280_fw.h.old 2004-11-13 22:51:43.000000000 +0100
+++ linux-2.6.10-rc1-mm5-full/drivers/scsi/ql1280_fw.h 2004-11-13 23:13:07.000000000 +0100
@@ -27,15 +27,9 @@
*/
#ifdef UNIQUE_FW_NAME
-unsigned short fw1280ei_version = 8*1024+15;
+static unsigned char fw1280ei_version_str[] = {8,15,0};
#else
-unsigned short risc_code_version = 8*1024+15;
-#endif
-
-#ifdef UNIQUE_FW_NAME
-unsigned char fw1280ei_version_str[] = {8,15,0};
-#else
-unsigned char firmware_version[] = {8,15,0};
+static unsigned char firmware_version[] = {8,15,0};
#endif
#ifdef UNIQUE_FW_NAME
@@ -45,15 +39,15 @@
#endif
#ifdef UNIQUE_FW_NAME
-unsigned short fw1280ei_addr01 = 0x1000;
+static unsigned short fw1280ei_addr01 = 0x1000;
#else
-unsigned short risc_code_addr01 = 0x1000;
+static unsigned short risc_code_addr01 = 0x1000;
#endif
#ifdef UNIQUE_FW_NAME
-unsigned short fw1280ei_code01[] = {
+static unsigned short fw1280ei_code01[] = {
#else
-unsigned short risc_code01[] = {
+static unsigned short risc_code01[] = {
#endif
0x0078, 0x1041, 0x0000, 0x3d3b, 0x0000, 0x2043, 0x4f50, 0x5952,
0x4947, 0x4854, 0x2031, 0x3939, 0x312c, 0x3139, 0x3932, 0x2c31,
@@ -2017,7 +2011,7 @@
0x70a2, 0x007c, 0x205b
};
#ifdef UNIQUE_FW_NAME
-unsigned short fw1280ei_length01 = 0x3d3b;
+static unsigned short fw1280ei_length01 = 0x3d3b;
#else
-unsigned short risc_code_length01 = 0x3d3b;
+static unsigned short risc_code_length01 = 0x3d3b;
#endif
--- linux-2.6.10-rc1-mm5-full/drivers/scsi/ql12160_fw.h.old 2004-11-13 22:53:26.000000000 +0100
+++ linux-2.6.10-rc1-mm5-full/drivers/scsi/ql12160_fw.h 2004-11-13 23:13:02.000000000 +0100
@@ -26,15 +26,9 @@
*/
#ifdef UNIQUE_FW_NAME
-unsigned short fw12160i_version = 10*1024+4;
+static unsigned char fw12160i_version_str[] = {10,4,32};
#else
-unsigned short risc_code_version = 10*1024+4;
-#endif
-
-#ifdef UNIQUE_FW_NAME
-unsigned char fw12160i_version_str[] = {10,4,32};
-#else
-unsigned char firmware_version[] = {10,4,32};
+static unsigned char firmware_version[] = {10,4,32};
#endif
#ifdef UNIQUE_FW_NAME
@@ -44,15 +38,15 @@
#endif
#ifdef UNIQUE_FW_NAME
-unsigned short fw12160i_addr01 = 0x1000;
+static unsigned short fw12160i_addr01 = 0x1000;
#else
-unsigned short risc_code_addr01 = 0x1000;
+static unsigned short risc_code_addr01 = 0x1000;
#endif
#ifdef UNIQUE_FW_NAME
-unsigned short fw12160i_code01[] = {
+static unsigned short fw12160i_code01[] = {
#else
-unsigned short risc_code01[] = {
+static unsigned short risc_code01[] = {
#endif
0x0804, 0x1041, 0x0000, 0x35e6, 0x0000, 0x2043, 0x4f50, 0x5952,
0x4947, 0x4854, 0x2031, 0x3939, 0x312c, 0x3139, 0x3932, 0x2c31,
@@ -1781,7 +1775,7 @@
0x681f, 0x000c, 0x70a0, 0x70a2, 0x0005, 0x7c12
};
#ifdef UNIQUE_FW_NAME
-unsigned short fw12160i_length01 = 0x35e6;
+static unsigned short fw12160i_length01 = 0x35e6;
#else
-unsigned short risc_code_length01 = 0x35e6;
+static unsigned short risc_code_length01 = 0x35e6;
#endif
next reply other threads:[~2004-11-15 2:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-15 2:26 Adrian Bunk [this message]
2004-11-15 8:48 ` [2.6 patch] SCSI qla1280: some firmware files cleanups Jes Sorensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041115022640.GX2249@stusta.de \
--to=bunk@stusta.de \
--cc=James.Bottomley@SteelEye.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox