From: Adrian Bunk <bunk@stusta.de>
To: davem@redhat.com, ralf@linux-mips.org
Cc: jgarzik@pobox.com, linux-net@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [2.6 patch] remove dp83840.h
Date: Mon, 29 Nov 2004 12:19:43 +0100 [thread overview]
Message-ID: <20041129111943.GB9722@stusta.de> (raw)
dp83840.h is included once but none of the definitions it contains is
actually used.
Is the patch below to remove it OK, or is there any usage planned?
diffstat output:
drivers/net/ioc3-eth.c | 1
include/linux/dp83840.h | 41 ----------------------------------------
2 files changed, 42 deletions(-)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c.old 2004-11-29 12:14:25.000000000 +0100
+++ linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c 2004-11-29 12:14:34.000000000 +0100
@@ -56,7 +56,6 @@
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
-#include <linux/dp83840.h>
#include <net/ip.h>
#include <asm/byteorder.h>
--- linux-2.6.10-rc2-mm3-full/include/linux/dp83840.h 2004-10-18 23:54:32.000000000 +0200
+++ /dev/null 2004-11-25 03:16:25.000000000 +0100
@@ -1,41 +0,0 @@
-/*
- * linux/dp83840.h: definitions for DP83840 MII-compatible transceivers
- *
- * Copyright (C) 1996, 1999 David S. Miller (davem@redhat.com)
- */
-#ifndef __LINUX_DP83840_H
-#define __LINUX_DP83840_H
-
-#include <linux/mii.h>
-
-/*
- * Data sheets and programming docs for the DP83840 are available at
- * from http://www.national.com/
- *
- * The DP83840 is capable of both 10 and 100Mbps ethernet, in both
- * half and full duplex mode. It also supports auto negotiation.
- *
- * But.... THIS THING IS A PAIN IN THE ASS TO PROGRAM!
- * Debugging eeprom burnt code is more fun than programming this chip!
- */
-
-/* First, the MII register numbers (actually DP83840 register numbers). */
-#define MII_CSCONFIG 0x17 /* CS configuration */
-
-/* The Carrier Sense config register. */
-#define CSCONFIG_RESV1 0x0001 /* Unused... */
-#define CSCONFIG_LED4 0x0002 /* Pin for full-dplx LED4 */
-#define CSCONFIG_LED1 0x0004 /* Pin for conn-status LED1 */
-#define CSCONFIG_RESV2 0x0008 /* Unused... */
-#define CSCONFIG_TCVDISAB 0x0010 /* Turns off the transceiver */
-#define CSCONFIG_DFBYPASS 0x0020 /* Bypass disconnect function */
-#define CSCONFIG_GLFORCE 0x0040 /* Good link force for 100mbps */
-#define CSCONFIG_CLKTRISTATE 0x0080 /* Tristate 25m clock */
-#define CSCONFIG_RESV3 0x0700 /* Unused... */
-#define CSCONFIG_ENCODE 0x0800 /* 1=MLT-3, 0=binary */
-#define CSCONFIG_RENABLE 0x1000 /* Repeater mode enable */
-#define CSCONFIG_TCDISABLE 0x2000 /* Disable timeout counter */
-#define CSCONFIG_RESV4 0x4000 /* Unused... */
-#define CSCONFIG_NDISABLE 0x8000 /* Disable NRZI */
-
-#endif /* __LINUX_DP83840_H */
next reply other threads:[~2004-11-29 11:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-29 11:19 Adrian Bunk [this message]
2004-11-29 11:36 ` [2.6 patch] remove dp83840.h Ralf Baechle
2004-11-29 15:34 ` Adrian Bunk
2004-12-02 11:26 ` Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2005-01-31 23:41 [2.6 patch] move dp83840.h to Documentation/ Adrian Bunk
2005-01-31 23:46 ` David S. Miller
2005-02-01 0:29 ` [2.6 patch] remove dp83840.h Adrian Bunk
2005-02-02 5:34 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041129111943.GB9722@stusta.de \
--to=bunk@stusta.de \
--cc=davem@redhat.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-net@vger.kernel.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox