From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261160AbULACSm (ORCPT ); Tue, 30 Nov 2004 21:18:42 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261169AbULACSm (ORCPT ); Tue, 30 Nov 2004 21:18:42 -0500 Received: from ozlabs.org ([203.10.76.45]:31393 "EHLO ozlabs.org") by vger.kernel.org with ESMTP id S261160AbULACSk (ORCPT ); Tue, 30 Nov 2004 21:18:40 -0500 Date: Wed, 1 Dec 2004 13:17:23 +1100 From: David Gibson To: Andrew Morton Cc: linux-kernel@vger.kernel.org Subject: Reorder sata_nv amongst SATA drivers Message-ID: <20041201021723.GA1001@zax> Mail-Followup-To: David Gibson , Andrew Morton , linux-kernel@vger.kernel.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.6+20040907i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Andrew, please apply. Hardly a big deal, but makes life a little nicer. Moves the sata_nv (NForce) driver earlier in the Makefile, so that it will be scanned earlier than other drivers. Since this SATA controller is in the NForce integrated chipset, it's very likely to be considered the "primary" controller on motherboards which also have another SATA controller (e.g. the ASUS K8N-E, which has a Silicon Image SATA/RAID controller too, handled by the sata_sil driver). Therefore, it makes sense to list it early, so that Linux's (default) idea of the order of devices won't be confusingly different from order that the BIOS thinks they belong in. Index: working-2.6/drivers/scsi/Makefile =================================================================== --- working-2.6.orig/drivers/scsi/Makefile 2004-10-19 13:37:59.000000000 +1000 +++ working-2.6/drivers/scsi/Makefile 2004-11-22 20:17:49.445893320 +1100 @@ -123,13 +123,13 @@ obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/ obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o +obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o -obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o obj-$(CONFIG_ARM) += arm/ -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist. NOT _the_ _other_ _way_ | _around_! http://www.ozlabs.org/people/dgibson