Unable to handle kernel NULL pointer dereference at virtual address 0000009a printing eip: c0115813 *pde = 35c77067 *pte = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: nls_iso8859_1 nls_cp437 vfat fat parport_pc lp parport snd_ens1371 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc md5 ipv6 nfs lockd sunrpc joydev w83781d i2c_amd756 i2c_sensor i2c_core usblp CPU: 194 EIP: 0060:[] Not tainted VLI EFLAGS: 00013246 (2.6.10-rc2-mm4) EIP is at do_page_fault+0x93/0x570 eax: f5ea0000 ebx: f5e9a240 ecx: f5ea0088 edx: f5ea013c esi: 00000000 edi: c0115780 ebp: 0000002e esp: f5ea006c ds: 007b es: 007b ss: 0068 Process (pid: -1047545376, threadinfo=f5e9e000 task=c18fdb10) Stack: 00000000 00000000 00000000 0000009a 00000000 f5ea013c 00001000 f5ea013c c033ce2b 00000000 0000000e 0000000b 00000008 00000000 00000000 006b48ea 00000000 00030001 00000000 00000000 00000000 00000000 00000000 00000000 Call Trace: [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] recalc_task_prio+0x7e/0x140 [] activate_task+0x64/0xa0 [] resched_task+0x60/0x90 [] try_to_wake_up+0x20d/0x240 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] mempool_alloc+0x66/0x130 [] autoremove_wake_function+0x0/0x50 [] ahc_linux_run_device_queue+0x470/0x900 [] autoremove_wake_function+0x0/0x50 [] _spin_lock+0x16/0x70 [] recalc_task_prio+0x7e/0x140 [] activate_task+0x64/0xa0 [] recalc_task_prio+0x7e/0x140 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] resched_task+0x60/0x90 [] try_to_wake_up+0x20d/0x240 [] recalc_task_prio+0x7e/0x140 [] recalc_task_prio+0x7e/0x140 [] activate_task+0x64/0xa0 [] _spin_unlock_irqrestore+0xf/0x30 [] try_to_wake_up+0x20d/0x240 [] try_to_wake_up+0x20d/0x240 [] _write_lock+0xe/0x70 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] resched_task+0x60/0x90 [] __wake_up_common+0x37/0x60 [] _write_lock+0xe/0x70 [] ip_frag_queue+0x2bf/0x420 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] task_rq_lock+0x36/0x70 [] ip_local_deliver+0x27a/0x290 [] __wake_up_common+0x37/0x60 [] __wake_up+0x38/0x50 [] _spin_unlock_irqrestore+0xf/0x30 [] sock_def_readable+0x7d/0x80 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] do_page_fault+0x0/0x570 [] do_page_fault+0x93/0x570 [] _spin_unlock_irqrestore+0xf/0x30 [] _spin_unlock_irqrestore+0xf/0x30 [] tty_ldisc_try+0x3a/0x50 [] __wake_up+0x38/0x50 [] do_page_fault+0x0/0x570 [] error_code+0x2b/0x30 [] fget+0x1f/0x60 [] do_select+0x230/0x2c0 [] __pollwait+0x0/0xd0 [] sys_select+0x2ae/0x4a0 [] sys_gettimeofday+0x2c/0x70 [] syscall_call+0x7/0xb ======================= Unable to handle kernel NULL pointer dereference at virtual address 0000002e printing eip: c0103da8 *pde = 35c77067 *pte = 00000000 Oops: 0000 [#2] PREEMPT SMP Modules linked in: nls_iso8859_1 nls_cp437 vfat fat parport_pc lp parport snd_ens1371 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc md5 ipv6 nfs lockd sunrpc joydev w83781d i2c_amd756 i2c_sensor i2c_core usblp CPU: 194 EIP: 0060:[] Not tainted VLI EFLAGS: 00013083 (2.6.10-rc2-mm4) EIP is at show_trace+0x28/0x80 eax: 00000019 ebx: 0000002e ecx: 00000001 edx: 00000001 esi: 0000002e edi: 00000000 ebp: 00001ffd esp: f5e9febc ds: 007b es: 007b ss: 0068 Process (pid: -1047545376, threadinfo=f5e9e000 task=c18fdb10) Stack: c033b443 c0103093 f5ea00cc 00000018 00000000 00000068 c0103e7b c033b464 00000000 f5ea006c c04694c0 f5ea0038 00000000 c0104001 c033b47b c18fdcca c18fb9e0 f5e9e000 c18fdb10 00013246 c03952c2 00000001 f5ea0038 00000000 Call Trace: [] syscall_call+0x7/0xb [] show_stack+0x7b/0x90 [] show_registers+0x151/0x1c0 [] die+0xfa/0x180 [] do_page_fault+0x0/0x570 [] do_page_fault+0x0/0x570 [] do_page_fault+0x2b3/0x570 ======================= Unable to handle kernel paging request at virtual address 001a00b4 printing eip: c0103da8 *pde = 35c77067 *pte = 00000000 Recursive die() failure, output suppressed <1>Unable to handle kernel paging requestLinux version 2.6.10-rc2-mm4 (root@nebula.ghetto) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #3 SMP Thu Dec 2 00:55:39 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) BIOS-e820: 000000003fef0000 - 000000003feff000 (ACPI data) BIOS-e820: 000000003feff000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 000000003ff80000 (usable) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec04000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7170 DMI 2.3 present. ACPI: PM-Timer IO Port: 0x8008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled) Processor #1 6:6 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Initializing CPU#0 Kernel command line: console=ttyS0,115200 console=tty devfs=mount root=/dev/sda1 resume=/dev/sda2 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1667.012 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1034516k/1048064k available (2207k kernel code, 12812k reserved, 791k data, 456k init, 130496k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. tbxface-0117 [02] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:................................................................................ Table [DSDT](id F004) - 282 Objects with 27 Devices 80 Methods 23 Regions ACPI Namespace successfully loaded at root c04821c0 evxfevnt-0093 [03] acpi_enable : Transition to ACPI mode successful CPU0: AMD Athlon(tm) MP 2000+ stepping 02 per-CPU timeslice cutoff: 731.01 usecs. task migration cache decay timeout: 1 msecs. Booting processor 1/0 eip 3000 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) Processor stepping 02 Total of 2 processors activated (6619.13 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd7d0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20041105 evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 evgpeblk-0987 [06] ev_create_gpe_block : Found 2 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:....................................................... Initialized 23/23 Regions 0/0 Fields 22/22 Buffers 10/13 Packages (291 nodes) Executing all Device _STA and_INI methods:............................... 31 Devices found containing: 31 _STA, 1 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) [ACPI Debug] String: [0x18] "Returning PCI0 APIC Mode" [ACPI Debug] String: [0x18] "Returning PCI0 APIC Mode" [ACPI Debug] String: [0x18] "Returning OP2P APIC Mode" [ACPI Debug] String: [0x18] "Returning OP2P APIC Mode" ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 11) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 *10 11) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) Machine check exception polling timer started. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API BIOS failed to enable PCI standards compliance, fixing this error. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] Real Time Clock Driver v1.12 hw_random: AMD768 system management I/O registers at 0x8000. hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected AMD 760MP chipset agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 64M @ 0xf0000000 [drm] Initialized drm 1.0.0 20040925 ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 18 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 ACPI: PS/2 Mouse Controller [PS2M] at irq 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 19 (level, low) -> IRQ 19 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:08.0: 3Com PCI 3c905C Tornado at 0x3480. Vers LK1.1.19 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller at PCI slot 0000:00:07.1 AMD7441: chipset revision 4 AMD7441: not 100% native mode: will probe irqs later AMD7441: 0000:00:07.1 (rev 04) UDMA100 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio hda: MAXTOR 6L080J4, ATA DISK drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-M1402, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: SEAGATE Model: ST336607LW Rev: 0007 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:0:0: Tagged Queuing enabled. Depth 8 SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB) SCSI device sda: drive cache: write back SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 ACPI: PCI interrupt 0000:02:07.2[C] -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:02:07.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:02:07.2: irq 17, pci mem 0xec142000 ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:02:07.2: USB 2.0 initialized, EHCI 0.95, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI interrupt 0000:02:00.0[D] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:02:00.0: Advanced Micro Devices [AMD] AMD-768 [Opus] USB ohci_hcd 0000:02:00.0: irq 19, pci mem 0xec140000 ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:02:07.0, from 10 to 3 uhci_hcd 0000:02:07.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:02:07.0: irq 19, io base 0x3840 uhci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 3 usb 1-2: new high speed USB device using ehci_hcd and address 2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:02:07.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Via IRQ fixup for 0000:02:07.1, from 9 to 0 uhci_hcd 0000:02:07.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected uhci_hcd 0000:02:07.1: irq 16, io base 0x3860 uhci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 2-1: new full speed USB device using ohci_hcd and address 2 hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usb 1-2.1: new high speed USB device using ehci_hcd and address 3 scsi1 : SCSI emulation for USB Mass Storage devices usb 1-2.3: new high speed USB device using ehci_hcd and address 4 scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 usb 2-1.1: new low speed USB device using ohci_hcd and address 3 input: USB HID v1.10 Joystick [Logitech WingMan Precision USB] on usb-0000:02:00.0-1.1 usb 2-1.2: new low speed USB device using ohci_hcd and address 4 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 I2O Core - (C) Copyright 1999 Red Hat Software i2o: max_drivers=4 I2O SCSI Peripheral OSM Advanced Linux Sound Architecture Driver Version 1.0.7 (Thu Nov 11 10:36:46 2004 UTC). ALSA device list: No soundcards found. NET: Registered protocol family 2 input: USB HID v1.10 Joystick [Logitech WingMan Precision USB] on usb-0000:02:00.0-1.2 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP: Hash tables configured (established 131072 bind 43690) ip_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: PCI0 OP2P USB0 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. usb 2-1.4: new full speed USB device using ohci_hcd and address 5 scsi3 : SCSI emulation for USB Mass Storage devices EXT3-fs: recovery complete. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 456k freed Adding 682748k swap on /dev/sda2. Priority:-1 extents:1 EXT3 FS on sda1, internal journal Vendor: Maxtor 6 Model: Y250P0 Rev: 0 0 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) sdb: assuming drive cache: write through SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) sdb: assuming drive cache: write through sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Vendor: Maxtor 7 Model: Y250P0 Rev: 0 0 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB) sdc: assuming drive cache: write through SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB) sdc: assuming drive cache: write through sdc: sdc1 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Vendor: TOSHIBA Model: MK6015MAP Rev: U8.1 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdd: 11733120 512-byte hdwr sectors (6007 MB) sdd: assuming drive cache: write through SCSI device sdd: 11733120 512-byte hdwr sectors (6007 MB) sdd: assuming drive cache: write through sdd: sdd1 Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0 ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 19 (level, low) -> IRQ 19 nfs warning: mount version older than kernel NET: Registered protocol family 10 Disabled Privacy Extensions on device c03ac880(lo) IPv6 over IPv4 tunneling driver ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 17 (level, low) -> IRQ 17 Synchronizing SCSI cache for disk sda: Restarting system. Linux version 2.6.9 (root@nebula.ghetto) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #3 SMP Thu Dec 2 00:55:39 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) BIOS-e820: 000000003fef0000 - 000000003feff000 (ACPI data) BIOS-e820: 000000003feff000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 000000003ff80000 (usable) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec04000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7170 DMI 2.3 present. ACPI: PM-Timer IO Port: 0x8008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled) Processor #1 6:6 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: console=ttyS0,115200 console=tty devfs=mount root=/dev/sda1 resume=/dev/sda2 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1667.407 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1034580k/1048064k available (2132k kernel code, 12776k reserved, 802k data, 436k init, 130496k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: AMD Athlon(tm) MP 2000+ stepping 02 per-CPU timeslice cutoff: 731.46 usecs. task migration cache decay timeout: 1 msecs. Booting processor 1/0 eip 3000 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) Processor stepping 02 Total of 2 processors activated (6619.13 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd7d0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 11) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 *10 11) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI interrupt 0000:02:00.0[D] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI interrupt 0000:02:07.1[B] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI interrupt 0000:02:07.2[C] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 19 (level, low) -> IRQ 19 TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) Machine check exception polling timer started. Starting balanced_irq highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API BIOS failed to enable PCI standards compliance, fixing this error. PCI: Via IRQ fixup for 0000:02:07.0, from 10 to 3 PCI: Via IRQ fixup for 0000:02:07.1, from 9 to 0 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) Real Time Clock Driver v1.12 hw_random: AMD768 system management I/O registers at 0x8000. hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected AMD 760MP chipset agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 64M @ 0xf0000000 ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 18 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 19 (level, low) -> IRQ 19 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:08.0: 3Com PCI 3c905C Tornado at 0x3480. Vers LK1.1.19 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller at PCI slot 0000:00:07.1 AMD7441: chipset revision 4 AMD7441: not 100% native mode: will probe irqs later AMD7441: 0000:00:07.1 (rev 04) UDMA100 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio hda: MAXTOR 6L080J4, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-M1402, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: SEAGATE Model: ST336607LW Rev: 0007 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:0:0: Tagged Queuing enabled. Depth 8 SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 ACPI: PCI interrupt 0000:02:07.2[C] -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:02:07.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:02:07.2: irq 17, pci mem f8834000 ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI interrupt 0000:02:00.0[D] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:02:00.0: Advanced Micro Devices [AMD] AMD-768 [Opus] USB ohci_hcd 0000:02:00.0: irq 19, pci mem f8836000 ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:02:07.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:02:07.0: irq 19, io base 00003840 uhci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:02:07.1[B] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:02:07.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) usb 1-2: new high speed USB device using address 2 hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected uhci_hcd 0000:02:07.1: irq 16, io base 00003860 uhci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 usb 1-2.1: new high speed USB device using address 3 scsi1 : SCSI emulation for USB Mass Storage devices Vendor: Maxtor 6 Model: Y250P0 Rev: 0 0 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) sdb: assuming drive cache: write through sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 usb 1-2.3: new high speed USB device using address 4 scsi2 : SCSI emulation for USB Mass Storage devices Vendor: Maxtor 7 Model: Y250P0 Rev: 0 0 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB) sdc: assuming drive cache: write through sdc: